Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

Similar Messages

  • My new Canon Pixma 7250 wireless printer can no longer find my wireless network. My MAC is, Yosemite 10.10.2. I've run diagnostics and Canon LAN printer setup routine many time. Is there a solution? Can anyone help?

    My new Canon Pixma 7250 wireless printercan no longer find my wireless network. (It worked fine until recently) I have a Yosemite 10.10.2. I've run diagnostics and the Canon LAN printer setup routine many times. Is there a solution? Can anyone help?

    Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

  • How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    Welcome to Apple Support Communities.
    If you have a Mac running OS X, try AirPrint Activator.
    http://netputing.com/airprintactivator/airprint-activator-v2-0/
    It's "donation-ware."
    Free to download and try. If it works and you like it, the developers do appreciate a donation, but the app continues to function, even without a donation.

  • I have an ipad 2, verizon jet Pak router, canon pixma mg3220 wireless printer. All were working until yesterday. Now I get  no air printer found message. Have shut down everything and restarted. No change

    I have an ipad 2, verizon jet Pak router ang canon pixma mg3220 wireless printer. All were working until yesterday. Now, I am getting no air printer message. Have shut everything down and restarted. It did not work.

    See requirements for AirPrint (http://support.apple.com/kb/ht4356):
    If your printer supports AirPrint but does not work then:
    Your printer might need a firmware update
    Your printer must be on the same WiFi network
    Your router must support Bonjour (Zero-configuration networking).
    For troubleshooting:
    Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
    Turn on WiFi router
    Wait 30 seconds
    Turn on printer
    Wait 30 seconds
    Turn on iPad
    Try to print.

  • Bought print central app have an impact Lexmark s300 series wireless printer can't get it to work with my I pad , help

    I bought the print central app have a Lexmark s300 wireless printer can't get it to work with my I pad any suggestions

    To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
    Hope this helps.

  • I need to connect my Chromebook to my Canon PIXMA MG3520 wireless printer

    I'm having problems connecting my Chromebook to my Canon PIXMA MG3520 wireless printer. Because of the Chrome OS, it will not connect like Windows or Mac. I need help before retire, please.

    Hello Bama-85,
    You are correct, printers do not install the same way on Chrome OS. I looked on the Google Cloud Print site and your Canon printer is indeed supported. Follow this link to setup your cloud ready printer.
    I haven't setup a Canon printer via Google Cloud Print, but I assume it's as easy as setting up HP's printers on the print service. 
    Miles
    HP Employee

  • My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

    My hard drive crashed on my Imac 24" 2009,  I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
    What external DVD can I get to work with the IMac?                              The Apple super drive is not compatible.

    Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

  • HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX  processor.

    I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC  OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help  thank you   Allan R

    So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
    I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 -  Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
    So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

  • Can't get networking working with RALink 3062 Drivers

    So i installed a core install with wireless-tools, but from here i followed the beginners guide to install networking and can't get it working, I even tried and compile the ra2860 drivers for it, said the compile and install worked but still can't get access to the ra0 interface. Need help

    Deleted
    Last edited by impassive (2011-08-27 15:15:27)

  • My Macbook Pro will not find or use the downloaded driver for my new Canon Pixma MX479 wireless printer

    I have been fussing for hours with a Canon Pixma MX479 printer I received as a gift. The printer was obviously designed for PC control, and has terrible instructions for setting up the wireless capability, but I finally found a few hints online about how to add a WPS printer to my Airport Extreme, so I can finally detect the printer. However, when I try to add the printer, either under System Preferences or while just doing a print, my MacBook requires that I download a driver from Apple to use it. When I attempt to do that, I get a message the driver software is unavailable from Apple and that I should contact the manufacturer for the driver. I have already downloaded and installed the Mac OS driver from Canon twice, but my MacBook apparently can't find it. So I am forced to use Airprint in order to communicate with the printer. I would like to use the proper software to make sure I am accessing all of the features the printer offers. Can anyone tell me how to associate the downloaded driver with my printer when I am attempting to add it?

    Hi Dwntso!
    Welcome to the Canon Forums and thanks for posting!
    So that the Community can help you better, we will need to know any error messages you're seeing either on your computer or the printer, and the version of OS X you've got on your MacBook as well as the way you intend to connect to your printer (USB or networked via WiFi or Ethernet).
    Any other details you'd like to give will only help the Community better understand your issue!
    If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
    Thanks and have a great day!

  • Airport Express and Canon Pixma IP4500 wireless printing

    Hello,
    I bought an Airport Express and set it up as an additional wireless network at an 5Ghz N mode. It's conneted to a Linksys Wireless router modem/router. Internet connectivity is fine from both iMac 24 and MacBook. Both use OSX 10.5.4.x
    Airport is set up via USB with a Canon Pixma IP4500 inkjet. When connected directly to the iMac, it prints fine. When I connect the IP4500 to the Airport Express, I get an Error 300 - basically saying the printer is not responding.
    The whole point of the Airport Express was a faster network for both wireless printing and playing iTunes wirelessly from the MacBook.
    Any tips on what could be a common problem for this printer?
    Thanks

    I had a similar problem
    I had to "add a new printer", so one printer refers to the directly connected printer and the other refers to the printer connected to the airport (bonjour).
    Greetings.

  • Canon Pixma MP500 wireless printing problem

    I've got this USB printer connected to an Airport Extreme base station. Wireless printing used to work fine, but doesn't anymore. I ensured that printer sharing is set in the Airport admin utility. Yesterday I spent about 30 minutes with a guy from AppleCare trying to troubleshoot this issue to no avail. Printing works fine if I plug the USB cable into the Powerbook. I'm using Canon-supplied drivers. But that was also the case when wireless printing used to work. So this problem is a bit strange and frustrating.
    My guess is that some security update or change in the OS is causing the problem. The Apple guy agreed, though he had no idea as to what the specific issue might be. Any ideas or help would be appreciated.
    Thanks,
    Rich
    PowerBook G4 15 1.67GHz   Mac OS X (10.4.6)  

    Hello Rich, Phil and Dave,
    I'll see if I can offer some advice to you all...
    Rich,
    Okay, first of all I want to check what you see in the Printer Browser > Default Browser. Under the heading Printer Name should be Canon MP500 and under the heading Connection should be Bonjour. If you select the printer, the Name, Location and Print Using should be automatically populated (Print Using should show Canon IJ Printer). Do you get this?
    If you do and can add the printer, then what happens when you attempt to print something?
    Phil,
    The -9672 is usually caused by the printer reporting it is a different model to the selected driver. Picking a different printer from the list of Canon's doesn't always work, as there is often control information in the driver comms that are specific for a model (otherwise you could have one driver for every printer). You should try running the Repair Permissions option in Disk Utility. Updates sometimes set some values back to system defaults, which can impact the ability of Mac to correctly identify a peripheral such as a printer.
    Dave the drummer,
    Do you notice the Airport signal strength when the printing fails? I have seen some printing fail like you describe when the signal drops too low. Is your wife's iBook located closer to the Airport than your PBG4?
    Also, I would try running the Repair Permissions option in Disk Utility.
    Regards,
    Paul

  • Why can i not get my ipad to recognize my wireless printer but my apple desktop works with it

    Why can I not get my ipad2 to print from my my wireless printer that i use for my apple desktop

    It's also possible that your wireless printer will work with a minor OS tweak if you're on Snow Leopard OS X 10.6.x. Your Mac system must be on for printing to occur. (I haven't tested with Leopard 10.5.x or Lion 10.7.x)
    Details are found in this Apple Support Communities thread begun in November 2010
    https://discussions.apple.com/thread/2658720?threadID=2658720&tstart=0
    I've been using it to print to a Canon MP560 wireless printer and an HP LaserJet 1320 USB-to-Mac printer from my wife's iPad 2 since the first day she received it for both photos and documents.  Duplex printing to the Canon does not seem to be supported.

  • Print from my ipad to my CANON PIXMA MP620 wireless printer?

    Is there any way to print from my ipad to my CANON PIXMA MP620 printer configured as a wireless printer?  I see several apps in the app store (e.g., "CANON Easy Photo Print"), but the MP620 doesn't show up on the list of printers supported by the app.

    See if Canon has an app to print to you or use a 3rd party solution like Print Central or Printopia.

  • How do i reset canon pixma MG2920 wireless printer to factory settings

    How do I reset  wireless printer Canon Pixma MG2920 to factory settings? Im trying to set it up with a new router , but the old router information keeps coming up in the Network configuration  thanks for your help

    Holding down the STOP button on the printer until the orange alarm light flashes 21 times, then releasing, should reset everything.

Maybe you are looking for