CFPDF action="addWatermark" ISSUE/BUG

Hello,
I am trying to add an image as a watermark into pdf file
using the CFPDF tag. Here is the code:
quote:
<cfpdf action="addWatermark" source="template.pdf"
image="bottle.jpg" destination="ad.pdf" overwrite="yes"
foreground="yes" showOnPrint="yes" >
The source file is not password protected.
And I get always the following error:
quote:
An error occurred during ADDWATERMARK operation in
<CFPDF>.
Error: The password provided is either wrong or does not have
sufficient permission to perform this action.
I made the PDF password protected and used the password
attribute in order to eliminate the pass protection error but it
does not help.
Please help!
thank you!

okay!
I found something about this.
A. I created the first (in the case above) source PDF using
Adobe LiveCycle Designer 8.0, with three dynamic textfileds so I
can update them later using CFPDFFORM. If I use this PDF to insert
watermark I get the error message above.
B. Than, I created plain PDF using Adobe Acrobat
Proffesional, CFPDF/addWatermark works perfect. The sad thing is
that I do not need just flat PDF, but with fileds on it.
Unfortunatelly the addWatermark will not resolve my issue,
because there is no option to set the size of the watermark/image
inside of the PDF.
What I need is:
I have 1 PDF template and 1 JPG image.
In the PDF template I have three dynamic textfileds.
The goal is - to insert the jpg into the PDF (and to
shrink/strech the jpg to fixed dimensions - I do not know in front,
what the JPG size will be) and to fill into the fileds using
CFPDFFORM.
The final result - PDF with the inserted image and three
fileds with new values.
I have Coldfusion 8 on Microsoft Server 2003.
I will really appreciate any help!
Thanks!
p.p. so still the bug is there if you do not have flat PDF
(or maybe if it is created with the livecycle designer i do no know
what is the case exactly).

Similar Messages

Issues / Bug with Nokia N9

Issues / Bug with Nokia N9
1. The mobile network gets disconnected after each call and I have to wait atleast 10-20 seconds to redial or make a new call, I cannot dial a number just after I finish a call / speaking with someone. It happens on both Incoming and outgoing Calls.
Troubleshooting Steps:
1. Changed SIM card from the telecom provider atleast 3 times. The same SIM card works absolutely fine in another mobile.
2. Reset and set to default settings tried - No Result
2. The ear piece volume is considerably low.
Troubleshooting Steps:
1. Reset and set to default settings tried - No Result
3. When playing a video online on YouTube the timing for a 4 minute video shows as
34:00 34:23 instead of showing 04:00 04:23
Troubleshooting Steps:
1. Reset and set to default settings tried - No Result
4. The photos from the Facebook app built into the phone do not always load even If I am running a 3.5G Mobile Data connection or at Home on a Wi-Fi connection
Troubleshooting Steps:
1. Reset and set to default settings tried - No Result
I am from India, bought the phone last year from Abu Dhabi and it is Made in Finland.
Really I need someone to help me out here!!

If you reinstalled the OS again from Nokia, you may just have a defective phone and there could be something wrong with the hardware. I have two N9's and I haven't experience any of these problems.
Can you record these problems and post the link to youtube here so I can see what's happening?
I Choose Nokia!

Known performance issue bugs and patches for R12.1.3

Hi Team,
We have upgraded oracle application from 12.1.1 to 12.1.3.
I wanted to apply the known performance issue bugs and patches for R12.1.3.
Please let me know for any details.
Thanks,

Are u currently facing any performance issues on 1213?
Tuning All Layers Of E-Business Suite – Performance Topics
http://www.oracle.com/technetwork/apps-tech/collab2011-tuning-ebusiness-421966.pdf
• Start with Best Practices : (note: 1121043.1)
• SQL Tuning
– Trace files
– SQLT output (note: 215187.1)
– Trace Analyzer (note: 224270.1)
– AWR Report (note: 748642.1)
– AWR SQL Report (awrsqrpt.sql)
– 11g SQL Monitoring
– SQL Tuning Advisor
• PL/SQL Tuning
– Product logs
– PL/SQL Profiler (note: 808005.1)
• Reports Tracing
– note: 111311.1
• Database Tuning
– AWR Report (note: 748642.1)
– ADDM report (note: 250655.1)
– Automated Session History (ASH) Report
– LTOM output (note: 352363.1)
• Forms Tuning
• Forms Tracing (note: 373548.1)
• FRD Log (note: 445166.1)
– Generic note: 438652.1
• Middletier Tuning
– JVM Logs
– JVM Sizing (note: 362851.1)
– JDBC Tuning (note: 278868.1)
• OS
– OSWatcher (note: 301137.1)

Data returned from cfpdf action=read

I'm trying to figure out how to determine if a PDF retrieved using cfpdf action=read has been flattened.
If I attempt to flatten an already-flattened PDF I get a "Source does not have any form. Cannot specify flatten for the WRITE action in the cfpdf tag" error. So, I'd like to read a PDF and then only run the flatten code if it needs it. But I can see from the variables returned from action=read how to determine that.
Thanks.
Matt

Oops. I meant "... I can't see from the variables returned from action=read how to determine that."
Matt

EMAIL AND CALENDAR ACCOUNT STATUS ISSUE / BUG OS 10.3.1

I found an issue / bug which is really frustrating me!
Phone:      Blackberry Q10 (SQN100-3)
OS:           10.3.1.1565
Mail:          IMAP
Calendar:  Google Calendar
Last week I updated my BB Q10 to the new officially released OS 10.3.1
Today I noticed that the connection info / status for email accounts and calendars (Settings > Accounts) wasn’t indication correctly.
In the Accounts menu it shows “E-mail” below the name of my email account and “Calendar” below my calendar account to indicate that my Q10 is connected to these accounts. But when I turn airplane-mode on it still shows E-mail and Calendar without being connected to any of these accounts.
Strangely when I turn on my phone while in airplane-mode the Accounts menu shows “E-mail” for my email account and “No Connection” for my calendar account, obviously without being connected to my email account. But when I turn of airplane-mode I receive emails and new appointments but the Accounts status for calendar still shows “No Connection”.
Apparently the account status is not updated while using my phone, it shows the status at startup. This is very annoying and I am unable to check whether I am connected or not to my email and calendar while not in airplane-mode.
In OS 10.2.1 the account status worked correctly and was updated (connected / no connection) while using my phone.
Anybody else with the same problem?
Is this already a known issue / bug?
Anyone an idea how to solve this issue?

I would simply delete both accounts (email and calendar) then readd them.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Updates for previously paid for apps that address stability issues, bug fixes, other improvements that a customer is entitled to

Why is the policy of Apple to prohibit customers from downloading FREE updates for previously paid for apps that address stability issues, bug fixes and other improvements that a customer is entitled to because the customer does not currently have a credit card on file that they can verify has an available balance??? I can understand it even for free apps or apps on sale or because most of those apps depend on in-app purchases but COME ON. Where is the ethics in that policy? Where is the consumer protection? Especially considering the ONLY marketplace to receive these third party products is through apple. INSANE.
Wasted another 3 or 4 hours today trying to find a solution. I am unable to provide alternative payment method and money is tight for next 2 weeks but this is temporary. It's not as if I will never be purchasing more apps and apple products in the future. I have been a loyal apple customer since the days when Power!ac 9500 retailed for $8,000.00. Another words for a very long time.
Anyone else find this to be a legitimate issue?

I am all for any instance where I am asked to verify my account or Apple ID. The issue is that I am being denied delivery of a beneficial update of a premium, already paid for app... Because I am (at the moment) maxxed out with my credit card I have associated with my Apple ID.
There are four different (full version) paid for apps that just all released major updates. The third party developers offer the updates for free to customers who have purchased the full version of the app and the update includes stability improvements, iOS 7 comparability, bug fixes and expanded functionality.
These are not apps that, in total, cost over $100... And that I use every day.
Never had an issue with being required to verify my account or Apple ID.

Cfpdf action="protect" on LiveCycle Designer created form

I am attempting to protect a PDF file which was created in LiveCycle Designer. I get the error below
Error: The password provided is either wrong or does not have sufficient permission to perform this action.
code:
72 : <cfpdf action="protect"
73 : source="#myfilepath##lockedfile#"
74 : destination="enc#lockboxpath##lockedfile#"
75 : newuserpassword="pass" >
Can a LiveCycle Designer created form be protected/watermarked using CF9.0.1?, Or am I spinning my wheels trying to make this happen?
Thanks,
Ronnie

No, you would have to recreate it in FormsCentral.

How to fix Action Link Issue in Table and Pivot Table when used Section

My OBIEE Version: OBIEE 11.1.1.6.5
Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
If you want to recreate this issue please follow next steps:
1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
4.     Click preview icon
5.     When you click on action link nothing happens
6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
How to fix this issue?
I'll be grateful for any help!

This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
Upgrade to 11.1.1.6.6 will fix this issue.

Was CS5 save-as action truncating filename bug fixed in CS6?

I've run into the Photoshop CS5 bug whereby an action with save-as truncates the filename (and adds " copy"). Can someone confirm for me whether this was fixed in CS6?
For the original bug, see for example:
http://forums.adobe.com/message/3807341
Thanks,
John

Old thread, I know.
The reason I advised you to see for yourself is that I have no idea what issue or "bug" you were attempting to describe, as I have never, ever experienced any "truncated file names" myself; I'm very careful with file naming. That's what the trial versions are there for, so you can make sure the new application works as you expect it to or not.

Panel's Iterator Range Size issue/bug

I have a panel that is displaying Departments. I have the attributes for that Departments VO dropped on the panel as textboxes with a navigation bar (based on the Departments VO) that allows you to navigate through the departments one by one. I also have that Departments VO dropped on the panel as a Combo Box to allow for faster navigation through the departments (instead of clicking next, next, next, etc) to get to a specific department. In this case, both use the same Iterator in the UI Model. I created a new Iterator in the UI Model for the Combo Box (still based on the same Departments VO) and set its Range Size to -1 to bring back the entire list of Departments in the Combo Box while the other iteratorâs Range Size is set to 10 by default. Running the panel, the Departments Combo Box only displays 10 records at a time. Initially, it only displays the first 10 records. When you click on nav bar last record button, it displays the last Departmentâs record and the Combo Box now only displays the last 10 records. It is not until you click on the â+â button (to insert a new Department) on the nav bar that the Comb Box displays all of the Departments. Once this insert action is performed the Combo Box displays all records no matter what you do, but ONLY after the insert action is performed.
Also, for example, this Departments is connected to Employees which is connected to Locations. Each has view links set up between them. If all three of these VOs are set up in panels similar to the Departments panel then the same result occurs with the Combo Box only displaying 10 Departments, 10 Employees, and 10 Locations, respectively. Once you perform the insert action on the Departments (as described above to get all Departments to display) it seems to trickle down into the Employees where you can see all the Employees without performing the insert action on the Employees VO, but it doesnât have any effect on the Locations. If you manually perform the insert action on the Employees, then that will trickle down into the Locations. The Departments, Employees, and Locations panels are on separate cards in a card layout panel. I was able to put all three VOs on a single panel and have a Departments nav bar and a Departments Combo Box (based on separate iterators with different Range Sizes set) with no problem.
Is this a bug in JDeveloper with doing it the way that I did it using separate cards/panels?

REPOST

Photoshop CS3 Actions Batch mode bug?

I posted this in the Mac forum but received no responses after a couple of days, so I am trying it here.
Photoshop CS3 Actions seem to have a bug such that when used in Automate > Batch mode it will use the name of the first file opened in the batch session for every file processed in that session. Since that name is used in Save step, this means having to deal with the "File Already Exist" dialog for every file in the batch because it is attempting to save at the designated location with the same file name. If the continue option is chosen each time, the final result is one file with the first opened file name, but with the contents of the last processed file.
To confirm that this is a problem particular to the opening step, I have disabled all processing steps as well as the saving step by toggling them in the Actions panel. I then ran the action in batch mode on a folder containing 4 files. This resulted in 4 opened files all with the same name but different image content.
This was with the "Override 'Open' Action Commands" checked/not checked, and the "Suppress File Open Options Dialogs" checked/not checked. The problem described also occurs when using a Droplet.
By comparison, Photoshop CS exhibits the expected behavior: when an action is used in batch mode to process an entire folder of files, the name of each file is retained after opening and used after processing in the save or export step.
The above described behavior of CS3 is a change acquired along the way to the CS3 version (I do not have the CS2 version to test). But more importantly, can someone please report if the CS4 version behaves as I described for CS3, or if it has been returned to the CS behavior?
OS X 10.4.11
G4 800 MHz 2 MB L3/processor 1.25 GB SDRAM
Is this a known bug?
Al

Hello Miguel,
I was going to come back to post some of my findings, one of which relates to your staement:
"- The open command created by Photoshop 6 doesn't keep the file's name, it is a much simple open command, and so it opens the file with the own file's name."
In my case I found that my CS version of the "same" action worked, while the CS3 version failed, precisely because the earlier one records less detail for the open step.
My need is to convert dozens of Quark pdf files to GIF and JPEG files for the web. What I found after several days of testing is that it is best to record the opening step in CS3 NOT using a pdf file, so that the "Open As Generic Pdf with 'Name____' " would not be coded into the opening step. Instead I recorded the whole action using a PSD file. Then I can proceed to run it in Batch mode choosing a folder of Quark pdf files as the source location with "Override 'Open' Action Commands" checked, and the "Suppress File Open Options Dialogs" checked, and it opens all the pdf files just fine in some background process, not getting stuck in the details of the file name, and proceeds to cary out the flattening, saving, and closing steps to my chosen target location and uses the finder file name of each pdf files in the source folder to save a filename.ext in the Target folder.
Contrary to what I stated in my original post, "Override 'Open' Action Commands" checked/not checked does indeed make a difference. If it is not checked, the files do open in batch mode, but the other steps are not performed. There is much more about this that I would like to know, and this may not be a general solution for all types of files that a user may wish to process in batch mode, but it works for my case. The main trick is to use as simple an opening step as possible when recording the action, and then letting Photoshop use whatever background process it requires to open a particular file type. I tested this by manually saving a pdf file to each of the twenty some odd formats available in the save as dialog to a Source folder, and then proceeded to batch process that folder with the action described above, and it worked for all except one.
So while there may not be a bug involved in this problem, there certainly is a lack of documentation about how the "improvements" in the opening step in newer versions of Photoshop affect using Actions in Batch mode.
Please comment if you can further explain any of the reported results. In particular, what is the situation in CS4?
Thanks,
Al

Enable data paging with parameters count() on new php function issue (BUG?)

I've got my app prototyped quickly with the default settings in Flex Builder 4. Now I'm going back and adding/modifying features to polish the app off.
For this application I'm using PHP5 as the server side.
The data paging is really cool and simple to call using the default settings. However, I'm running into issues with customizing the data paging feature.
This is the default header of the php function that was created for me:
public function getTblbrowserrecord_paged($startIndex, $numItems){...}
Instead of dumping all data back to the function I want to be able to search on certain fields so I created a new function called:
getTblbrowserrecord_search_paged ($szName, $szIP, $szRule, $szURL, $szDateLow, $szDateHigh, $szCode, $startIndex, $numItems ) {...}
The new function is tested and operates as designed.
I set the input types of the variables and return type (Tblbrowserrecord[]) of the new function then went to enable data paging. The first screen came up and asked me for the key to use which I selected. The next screen came up and asked me for the number of records which I set to 100 then went to select the count operation.
I initially selected the automatically created count() function but it came up with the error " Count operation parameters should match the paged operation parameters list."
So I created another function to match the search function's parameter's list:
public function count_searched($szName, $szIP, $szRule, $szURL, $szDateLow, $szDateHigh, $szCode, $startIndex, $numItems) {...}
But I still ge the error "Count operation parameters should match the paged operation parameters list."
But they DO match. I looked at the default functions that were created by FB4 and noticed that the automatically generated function count() has no parameters and the paged function has the two functions $startIndex and $numItems which are not identical yet they work. I tried removing those two fields from the count function but got the same results.
What am I doing wrong?
Thanks!

Nevermind... For some reason my FB4 is not updating correctly. After removing the two control fields at the end of the list AND exiting the app/re-entering everything worked ok. I've been having this issue a lot lately and am thinking that is is a bug of some sort?

Calendar issues - bugs or do I misunderstand how it should work?

I'm having a few calendar issues that seem like bugs. I have the latest release installed but I don't remember seeing these problems before updating. I could be wrong though - my memory ain't what it used to be.
On the calendar week view, if I swipe to scroll down to see the afternoon, I can't swipe back up again. I have to swipe left or right to view a different week before it'll let me view the morning.
Also, if I go to the month view and open a particular day with an event. If I then swipe on the bottom to go backwards, it shrinks the card and lets me choose another open app (home view?). Instead I would have expected it to return to the previous screen?
Another problem; I had to tap an event in the week view about five times before it opened the day view. Poor detection?
Do these sound like bugs? I've only had my Pre for a few days so I'm still learning. Thanks

Hello and welcome to the forums;
Going back and forth between morning and afternoon is working fine for me, how many calendars do you have and what kind are they (yahoo, gmail, etc)?
Going to month view, then tapping on a day and using the back gesture does put you into card mode, because you have not entered a new level of menu, just a different view. If you were to go into a specific event, then you could back gesture to the previous view, but going between day/week/month is accomplished only with the selection buttons at the bottom of the screen.
Instead of trying to tap a particular event from week view, have you tried just tapping on the date at the top? or somewhere else on the column for that particular day? Do you see the "ripple" on the screen showing that it recognized a screen tap?
Hope this helps,
TreoAide

Action item issues error

I built a panel today and all works well except the ACTIONS.
I created separate action menus for several workflow actions
I have tested and I get an error saying
"this version of photoshop [CS4 etx in my case] cannot
fullfill this service....."
Some of the actions do call on 3rd party software but running
the action in photoshop has never been a problem.
I also get an error on the first action menu on the first
subset which is just applying my copywrite file info.
Anybody else have this issue or a solution?
Thanks
BTW..my ps4ext action folder is under
c/doc&settings/user/application data/adobe etc.

OK...my fault.
The spelling has to be absolutely correct when inputting the
action and the set in configurator....DUHhhh!
Upper/lower case counts as do any spaces.
Once I got that straight, the actions work, including opening
ant 3rd party filters that are engaged in the original PS4 actions
pallette.
FYI..I automated and open PTLens/Dfine/Pixel
Genius/Photolift/Viveza/Akvis/focalpoint etc.

[CS4] Clipping Mask issue (bug?) - Beachball when I try to select masked group

I have a somewhat complex compound path (1400 points) that I've duplicated several times and clipped. I want to make a second copy of this clipped set of objects. When I try to select the group that contains the clipping mask (with the selection tool or in the layers palette) illustrator chugs for over a minute. Once it's done chugging and I have my group selected I hit copy and paste. It chugs for another minute and then does nothing but deselect my group.
I saved the file down into CS3 format and opened it in CS3. I have no trouble with copy, paste, select, scale, or anything when I'm in CS3 - no slowdown at all. I saved the file in CS3 and opened the CS3 format file in CS4 and I still have the beachball/chug problem.
I'd like to note that the trouble begins only when I apply the clipping mask. I can select all those objects and copy/paste/rotate/scale/whatever until I apply a mask and then I can't do anything to them. The clipping mask itself is rather simple - only 26 points.
I'm on a G5 with 8gigs of RAM and over 30gigs of available space in my scratch disc. Any advice or any other users who've had this problem?

No that is not true and you know CS 3 does not come close to CS4 in performance and if I were you I would download the trial, although I have feeling you do not have the resources to to actually run the program and that has you quite miffed,
Perhaps the next release will finally release you, so long!
Tracy I found that there s a setting that is on by default in CS 4 that would make things go a bit slow and always has if selected by the user.
Clearly a mistake I would think but for some reason the default settings for the raster effects is 300 ppi as opposed to 72 ppi which really many times will eat up the memory no matter how much you have, and Illustrator can only use a limited amount of RAM something like 2GB, so that the amount of RAM is not the issue and the scratch could be as wide open as possible but it still will choke.
It may not have the resource to as in your case make a review. So I would try setting the document raster image effects setting to 72 ppi and then when outputting it change it to 300ppi or tell the printer to do so.
Hans I am sure you will now be relieved to find out that CS4 is behaving as it should with the right setting.
Enjoy the trial it is free. You are going to love CS 4.
I am mistaken Tracy and Hans CS 3 also has the default setting at 300 ppi I should have checked first.
Yes Hans this might be an issue that is a strike against CS4 on large complex projects
I am certain it was good idea to change the clipping path behavior. The question is how big or complex does the file have to be before this happens.
Hans you should still try the trial and see for yourself. Of course if you don't have the resources it might be difficult to load the trial.
I would still try changing the setting to 722 ppi and changing it for output after the work has been completed.
Yes I think you found and important bug.

CFPDF action="addWatermark" ISSUE/BUG

Similar Messages

Maybe you are looking for