Change of Maint. Item in Maint Plan

Hi Experts,
is it possible to change of call object in Maintenance Plan,
as initially i've created maint plan with call object as order,
now instead of order ,i want Notification as call object,
please guide me if this is possible,
or i've to delete maint plan and create new maint plan
thanks in advance

Hi Pravin,
it is not possible to change call object in a maintenance plan. Even u create a new maintenance plan with same category u cant assign notification as call object. U hv to create Maintenance Plan category which has call object notification, then u can proceed.
narendra

Similar Messages

Copying Header level Billing Plan to Item Level Billing Plan

Hi Gurus,
I have the following Business Scenario:
I am creating Sales Order with reference to contract. In the sales order item level detail, a check box(Copy Header level Billing Plan to item level Billing Plan) is checked. For my Business Scenario, I do not want this check.
Could you please help me in making the configuration changes to remove this check box.
Regards,
Nish

Dear
I hope just try once
When you assign Copy Header level Billing Plan to item level Billing Plan That header level billing plan data also will come to item level it means you can change in item level
if you dont want this function in item level -- Billing plan ..Just remove the check box
Then you cant find please try it and let me know
Thanks a lot
venu

Problem with dynamic change a page item value

Hi,
I'm trying to dynamically calculated the value of an item based on a simple formula that involves the multiplication of two elements from the same page.
To do this, create dynamic action as follows:
Event: Change
Selection Type: Item(s)
Item(s): P19_DURATION
Action: Set value
Fire on page load: TRUE
Set Type: SQL Statement
SQL Statement: SELECT :P19_DURATION * :P19_RATE FROM DUAL
Page items to submit: P19_DURATION
Selection Type: Item(s)
Item(s): P19_AMOUNT
When altering the P19_DURATION get no change in P19_AMOUNT
Since my knowledge of javascript is almost zero, I'm trying to do this with pl / sql or sql. Try the dynamic action with a function or a PL / SQL statement and nothing works.
Have to use javascript for this?
Searching the forum I think it's something simple, but I did not find an example similar to what I need.
Regards

Event: Change
Selection Type: Item(s)
Item(s): P19_DURATION
Action: Set value
Fire on page load: TRUE
Set Type: javascript
javascript Code:
amount = $v('P19_DURATION') * $v('P19_RATE');
$s('P19_AMOUNT',amount);

Changes to OITM Item Name replicate to RDR1 Dscription on open order lines

Hi
A quick question, does anyone know if it is practical to have changes to an item's Item Name field replicated to sales orders RDR1 Dscription field on orders which have open lines for that item?
Scenario we face is when an item is made 'obsolete' standard practice is to mark it inactive and edit the OITM Item Name field to contain 'Obsolete'.
We may have sales orders with lines open for this obsolete part which we need to be automatically updated if the original data changes.
Thanks in advance for advice or guidance.

Hi Marli,
Try this:
IF $[RDR1.U_Label] = '2'
SELECT Case T0.U_UPCChoice
When 1 THEN T1.U_UPCRetail
WHEN 2 THEN T1.U_UPCLoc
WHEN 3 THEN T1.U_UPCItem
WHEN 4 THEN 'Look at Attachment'
END
FROM dbo.OCRD T0, dbo.OITM T1
WHERE T0.CardCode = $[$4.0.0] AND T1.ItemCode = $[$38.1.0]
Thanks,
Gordon

Want to cancel my Photoshop one-year plan and change to a full student annual plan, but when I click on cancel plan it only tells me to view my billing info which doesn't help at all!

I'm trying to cancel my Photoshop one-year plan and change to a full student annual plan, but when I click on cancel plan it only tells me to view my billing info which doesn't help at all!

Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Upgrade single to all Cloud http://forums.adobe.com/thread/1235382 may help

EXIT to change / add line items during STO PO creation in T.Code ME21N

Hi
Can somebody suggest me a EXIT or a BADI to change / add line items during STO PO creation in T.Code ME21N.
The requirement is as below.
When the user enters a material no ( which has a BOM created in CS01), and presses enter or saves the PO, i need to get the sub components of the BOM and populate them as the next line items.
This is because the user needs to create the delivery with reference to the PO. In the delivery, the BOM material needs to be populated with all the sub components of the BOM.
I tried to do it using EXIT_SAPMM06E_013 in which i am able to change / add the line items in the XEKPO and YEKPO internal tables. The entries are available in the internal table when the EXIT is executed.
But when the PO is posted internally, the item is not changed/added.
Thanks in advance.
Guna.

Hi,
Try BADI "ME_PROCESS_PO_CUST".
cheers,

Enable change logs for item level of Sales Document

Hi,
On transaction VA02, additional screen field (Booking Date) is added (& consequently 2 appends with date field in the tables VBAK & VBAP).
When this date is changed in the header, the corresponding dates are changed in the item level as well.
However, the change documents are created only for table VBAK (though item data is updated in VBAP also).
When the date is changed at the item level, the change logs are created for the corresponding field in table VBAP.
The data element has 'Change Document' checked.
How can I activate the change to be logged for the item level (VBAP), when the date is changed at header level (VBAK)?

Hi Nidhi,
Maybe set a breakpoint in include MV45AF0C_CHANGE_DOCUMENT_CREAT
Then check in UPDATE debug mode the value of upd_vbap and the contents of xvbap which are passed on to function VERKBELEG_WRITE_DOCUMENT .
This function creates the change documents based on the data changes.
I would have thought that since the date values are changed at item level as well when you only change it at the header, they should get a change document created automatically, since the dates must be in the XVBAP table (as their value is changed at the DB).
So I would compare the various internal tables for both scenarios (header change, item change) to determine their differences.
After this use one of the user-exits to populate the internal tables for the header scenario based on the values of the item scenario. I would feel this to be a last resort though, since something appears not to be working correctly (I think).
Hope this makes sense,
Robert

How to propagate the changes made in Essbase outline to Planning

Hi,
I have created a userdefined dimension called 'Product' with one member 'SampleProduct' in planning. I logged into essbase and accessed the outline created for the plan type. In the outline, under product dimension, I have created one more member called 'ChanduProduct' and saved the outline. what should I do to see the new member created in essbase outline in Planning application?
Similarly I changed the density of Product dimension from sparse to dense in essbase. How can I propagate this change to planning application? Please tell me whether we can do this operation or not. If yes, how to do?
Thanks in advance,
Chandu

Hi Chandu,
the outline of planning is stored in sql repository.
when you refresh the planning application using manage database in administration; all changes from planning will propagate to essbase.
you should not make changes in essbase outline.
all changes in outline should go through planning web application (this is one of the best practices)
hope this helps.

Change of line item amount in miro

hi,
i have a doubt on the change of line item amount field value at PO reference tab in MIRO.
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice?
2) the difference in point 1 will hit stock account (map) or price difference.
3) when vendor later on give CN, we need to do subsequent credit.
4) in subsequent credit, need to create with reference to PO.
5) we need to change the amount at PO reference item line according to CN?
thanks

Hi,
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice? --- Yes you have to change it to Vemdor invoice amount
2) the difference in point 1 will hit stock account (map) or price difference. --- Yes
3) when vendor later on give CN, we need to do subsequent credit. -
Yes with ref to PO
4) in subsequent credit, need to create with reference to PO. -
Yes
5) we need to change the amount at PO reference item line according to CN? -- yes.
Other Option
You can use invoice reduction - System will create Inoice and credit memo in the same document.
SPRO Steeting require :
1. G/L account should be assigned to RKA trnsaction ket in OBYC.
2. Document type KG should be defined in Transaction code MIRO in customizing for doucment type invoice verification / Valuation in SPRO.
3. Number range should be defined for Doc type KG.
Regards,
Shailesh Mackwan

Change FI document items created from MIRO

Hi All
I'm creating invoices with MIRO transaction.
I want to change some document items of FI document related to one invoice, assigning the vendor number of header invoice to the field bseg-lifnr created in FI document.
I have tried with BTEs, substitutions, exit LMR1M001, BADI Invoice_Update and Enhancement in MRM_INVOICE_PREPARE_AND_POST.
I can't find the way to change this field of the FI document during posting with any of these techniques.
Thank you in advance

Hi niraj and Rob
I have made a substitution at line level that calls a user exit created in report ZRGGBS000.
This works fine in FI documents created from FI transactions like FB01 but the MIRO execution doesn't pass for it.
Our users are responsible of some profit centers.
They want to know in profit center analysis all invoices that refer to their own profit centers, and who are their respective vendors.
In those analysis, they see GL line items of incomes and expenses and need to know the vendor that origins them.

PO printout is not coming after changing only line item Delivery Address

Hi
Can anybody suggest a solution for the problem?
Using ME22N , if I change the line item delivery address details to the already generated manual address number ( Not generated using Transaction MEAN)
If I save the PO then PO Printout is not coming but output message log showing " No print-relevant changes to document XXXXXXXXX exist"
We can read CDHR and CDPOS table for changes .
Is there a way to pass the parameter to the print program to Print the changes?
Thanks
sanath
Edited by: sanath kumar sarvepalli-venkata on Nov 2, 2010 11:23 PM

Hi,
In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
Now your Output will be triggered with a change indicator and you can process it using ME9F.
Regards
Chandra Shekhar

How to change a text item to have a link that opens a different page?

Hi,
How to change a text item to have a link that opens a different page?
Thanks,
Guy

Hi Denes,
I understood what the code will do. But it did not work.
...a href="f?p=&APP_ID.:2:&SESSION.">LINK</a...
By default, P5_TASK_NAME displays Task Name which is passed from Page 3.
So I changed your code as follows so that P5_TASK_NAME value may be displayed with a link.
...a href="f?p=&APP_ID.:3:&SESSION.">:P5_TASK_NAME</a...
But P5_TASK_NAME value appears without any link and does not open page 3.
Then I created a new text item (display only) in the same HTML region in page 5 and entered the following code in the default box:
...a href="f?p=&APP_ID.:3:&SESSION.">LINK</a...
When I ran the application, it displayed the whole code as text.
How can I display P5_TASK_NAME value with a link to open page 3?
Would appreciate your help.
... to be replaced with < or >
Could you please let me know how to display link code correctly?
Thanks,
Guy
Edited by: GUY3 on Mar 11, 2009 4:20 PM

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Change in Work item Text for Approval Workflow WS14000133

Hi,
I need to change the work item text for Shopping Cart Approval Workflow WS14000133.
I have created an Attribute in Business Object BUS2121 and called the same attribute in work item text.
In PFTC -> Redefine Work item text - > and i have defined the work item text as well called the attribute from the container.
what the problem over here is - when I am passing the attribute in the work item text in the task, I am unable to see the work item text with the Dynamic Attribute but I am able to see the work item alone (not with the Dynamic attribut)
But when i debug the workflow from SWI1 then i can see the dynamic attribute in the Container of the workflow but nt in the approver's inbox in portal..
Can you please tell me - that why is this a strange behaviour that i can see the Dynamic attributed created initially in the workflow container of the Business Object but nt in the Approvers inbox either in Backend nor in the front end...
Thanks,

Hi,
Maybe this SAP note/KBA will help :
1470761 - How to change the text of the SRM approval links in inbox or UWL
Kind regards,
Siobhan

Pegging information has not been calculate for [item] in this plan

Hello planners -
we ran across a strange thing today. We have an item in our unconstrained MRP with multiple demands and resulting supplies.
The last demand line (Sales Order MDS) shows pegging information has not been calculate for [item] in this plan - and only this line.
The item is set for End Assembly/Hard Pegging, the plan options have pegging enabled, and it works for all other demands.
Any idea why one demand line is excluded from the pegging calculation?
Thanks,
Christoph

On the surface, the item seems to have its supplies balanced to the demands – 9 sales order demands, and 9 supplies (planned orders and non-standard work orders).
A look under the hood shows some interesting things:
• The first non-standard work order is linked to a specific project (we use Seiban manufacturing).
• There is no demand for that project. That leaves the above work order hanging – it cannot be used for anything else, only this project.
• This work order also has an exception message “Items with excess inventory in a project/task” – makes total sense
• The last demand cannot peg to the existing work order, hence the somewhat misleading “pegging information has not been calculated in this plan” message
• The item shows one more interesting exception called “Demand quantity is not satisfied” – which is somewhat true.
The immediate solution is to take the project number off the work order. The next plan run has relinked all supplies and demands as needed.

Change of Maint. Item in Maint Plan

Similar Messages

Maybe you are looking for