Choice of the file for saving data
I have an appication, I have an sub vi named «Entrées Consignes », Id like save the différentes data which I enter in the list in a file when I click to Modifier Données.I think saving my data but when I open my file , I don't read the good values .
What I do?
My second question is, when I enter the differents values in the list, I'd like that when I close this vi and I open again, the same values display instead of zero everywhere.
Is it possible?
Thanks a lot for helping me.
Bye!!
Attachments:
Entrées Consignes.vi 59 KB
Les données sont correctement enregistrées, mais pas sous une forme directement lisible avec un éditeur de texte (Word, Excel...). Elle sont codées directement sous forme binaire, et il faut réaliser le décodage inverse pour les retrouver. C'est ce que fait le vi attaché, en demandant la lecture du fichier, et en précisant que les données sont un cluster de 6 nombre flottants en double précision...
Ce même vi peut d'ailleurs être utilisé pour "recharger" les valeurs des contrôles lors du lancement de votre vi. Mais pour celà, il faut connaître le nom du fichier à relire, et ensuite utiliser des variables locales pour écrire dans les différents contrôles.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Mais_si_il_est_enregistré.zip 11 KB
Similar Messages
-
Know an extension that searches for the file "last modified" date?
I am working on a site with 80,000 pages and need to find an
extension that will search all files within the site and populate
the date each file was last modified. Know of an extension that
will assist in this situation? Any ideas will help, thanks in
advance!Ahh, so now your requirements are changing. You do not want a
simple
text file output after all, but instead a sortable list. So
perhaps
output as a csv that could be sorted within a spreadsheet.
Altho 80000
rows?
It is a bit hard to believe that an organization with an
80000 page
website does not have inhouse gurus who could do this in a
heart beat.
E. Michael Brandt
www.divaHTML.com
divaGPS | divaFAQ
www.valleywebdesigns.com
JustSo PictureWindow
mercuryfenix wrote:
> I just finished the first scan and was not impressed.
PageList creates an ugly
> and nearly useless list of file name, title, path from
page root, a link to the
> file, last modified date and time, and some meta
garbage. To top it all off,
> you cannot sort it by any of these categories because it
puts all the data into
> a lousy html table- useless.
> I could probably get buy with this, but it would be
horrible....80,000 pages
> to scan! O yeah, i forgot to mention it has a very low
limit to how many files
> it can scan in one scan!
>
> I still am in need of a better extension. Please keep
helping.
> -
Save the file and give date & time stamp
1. Reading the Excel file from the selection screen as a parameter.
2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
Internal table.
3. Implementing the Business Logic.
4. Move output to Final Internal table.
5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
6. That flat file should be saved with the name and location given in the Excel.
7. When ever I run the program output file will generate in the same location but with date and time stamp. Because Im running the program for range of employees say initially I run for 1 10,000 employees next 10,001- 20,000 like that.
Whenever I run for 2nd time it will overwrite the previous output, thats the reason Im using date and time stamp.
Eg:
PERSONAL Numbers Name Location
00000001 xxxxx-24.04.2007-10.30 C:\
00000002 xxxxx-24.04.2007-10.35
00000003 xxxxx-25.04.2007-10.40
00000004 xxxxx-25.04.2007-10.30
Can any one help me how to save the file and give date & time stamp through hardcode?
please help me in this issue.I am not clear with your problem. Based on the understanding of your question,
there can be two cases.
1- U want to insert time stamp in the output file.
2- Time stamp is already there, u just have to solve the overwriting issue.
If your question goes with option 2, You can make use of import parameters
<b>CONFIRM_OVERWRITE</b> : Which will ask for confirmation before overwriting.
<b>APPEND</b> : which you can choose either to append the data to the existing file or overwrite it.
Please inform if the issue is not resolved.
Message was edited by:
BINU RAJ BINU -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Save the data in the file as json data
Hello,
I need to read data from list / Pictures gallery / Documents and save the returned data in the file as json data .
How Can I Implement that .
ASkTry below:
http://msdn.microsoft.com/en-us/library/office/jj164022%28v=office.15%29.aspx
The code in the following example shows you how to request a JSON representation of all of the lists in a site by using C#. It assumes that you have an OAuth access token that you are storing in the
accessToken variable.
C#
HttpWebRequest endpointRequest = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + "/_api/web/lists");
endpointRequest.Method = "GET";
endpointRequest.Accept = "application/json;odata=verbose";
endpointRequest.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse endpointResponse = (HttpWebResponse)endpointRequest.GetResponse();
Getting properties that aren't returned with the resource
Many property values are returned when you retrieve a resource, but for some properties, you have to send a
GET request directly to the property endpoint. This is typical of properties that represent SharePoint entities.
The following example shows how to get a property by appending the property name to the resource endpoint. The example gets the value of the
Author property from a File resource.
http://<site url>/_api/web/getfilebyserverrelativeurl('/<folder name>/<file name>')/author
To get the results in JSON format, include an Accept header set to
"application/json;odata=verbose".
If this helped you resolve your issue, please mark it Answered -
Every time I try to open up my IPhoto app I keep getting a pop up message saying the file for my iPhoto app has become corrupted and needs to be restored from back-up. The problem is I never backed it up. and if by slim chance I did but can't remember for some reason I can't find the back-up file on my Mac Book pro. Any recommendations as to how to proceed would be greatly appreciated. Thank you in advance
This is a good lesson for all of us. Having only one sets of files without a backup is a ticket to disaster. I know several folks who lost all of their photo library when the hard disk on their computer died. It's shame. Those files that are important to you should be saved in at least one different location than just on your computers hard drive. Its even better to keep two backups.
-
Read different language from the file and upload data
Hi Expert,
I am loading customer master data through BDC( trx-XD01) by reading a file from PC. The file contains customer data in different language like English, Chinese, and Japanese etc. However, when creating customer master data, only those data in English are able to create, as I am in English log on. The data in other language is showing garbage value. However, when I am logging in with that language (say Chinese) this time I am able to create customer for Chinese data but not for other.
Can someone one help me to solve this problem irrespective of language in the file and SAP log on, I should able create customer through my program.
Thnx ,
Deba
Edited by: Debashis Mahunta on Feb 11, 2008 10:55 AMHi Expert,
I am loading customer master data through BDC( trx-XD01) by reading a file from PC. The file contains customer data in different language like English, Chinese, and Japanese etc. However, when creating customer master data, only those data in English are able to create, as I am in English log on. The data in other language is showing garbage value. However, when I am logging in with that language (say Chinese) this time I am able to create customer for Chinese data but not for other.
Can someone one help me to solve this problem irrespective of language in the file and SAP log on, I should able create customer through my program.
Thnx ,
Deba
Edited by: Debashis Mahunta on Feb 11, 2008 10:55 AM -
Help! I deleted the files for AE CC instead of uninstalling and can't get my files back!
Ugh! I was an idiot and deleted all the files for both After Effects CC and Premiere Pro CC and I can't redowload or reinstall the applications! My updater says they're up to date but doesn't realize that they are gone from my computer. What do I do?!
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-
Can anyone recommend and app for ipad mini to run excel documents offline and let the files be saved ot the ipad hard drive. I am frequently out of network range and need to be able to run the sheets.
All of the "Office" document editing applications on the iPad have limitations. Best try them out to see if they meet your needs.
iWork by Apple
Keynote
Numbers
Pages
DocsToGo
• VIEW/EDIT/CREATE Word & Excel files(Office 2007/2008/2010)
• VIEW PowerPoint, PDF, iWork, Text, .RTF, and more!
• Send & receive attached supported documents using the built-in Mail app
• FREE desktop application with your purchase! Compatible on Win & Mac allows you 2-way file sync with a WIFI connection.
• Open & Edit files within DocsToGo from any 3rd party app that supports the “Open In” feature
• Supports iTunes File Sharing via USB cable for manually moving files
https://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
Office² HD
"Office² HD, the most intuitive and straightforward office document editor available on the iPad, makes it easy to open, view, create and edit Word (DOC & DOCX), Excel (XLS & XLSX), and PowerPoint (PPT & PPTX) files right from your iPad!"
https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Quickoffice Pro HD
Create and edit ALL Microsoft® Office -- document, spreadsheet, and presentation formats, as well as view PDF files, on the go. Our advanced file manager lets you manage local files, access Google Drive or other cloud accounts, and works with your iPad email attachments so you can work anywhere, anytime - online and offline.
https://itunes.apple.com/us/app/quickoffice-pro-hd-edit-office/id376212724?mt=8
nsdjoey presents ways to edit office documents in this web page:
https://discussions.apple.com/message/21953221#21953221 -
2-3 things to watch out for when SAP is the source for a Data Warehouse
Hello
What are 2-3 things to watch out for when SAP is the source for a Data Warehouse (Informatica for ETL and Cognos for reporting)?
Thanks
G. VijayGoing through some or all of this might help:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464
Many, including me, have also followed the advice given by others here to add DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.220
208.67.220.222
Click on Apply Now and close the window.
Restart Safari, and repair permissions. -
I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
I'm using FF on another computer, and pages that I have used in the original have opened, except for Twitter. I give the PW and the message for saving the password appears, but Twitter's HP page doesn't open, instead the registration page is the one that does... I have tried with another system and the page opens, so I know the problem isn't Twitter's, but FF's... can you help me? I want to open Twitter here...
This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
What are the settings for apn data and mms for iphone 4 on straight talk?
what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!
They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related. -
When I attempt to sync my i phone with itunes on my computer not all of the songs make it to my phone. Itunes is telling me that it cannot find the files for these songs. How do I fix this?
Hi fishonfoot,
Thanks for visiting Apple Support Communities.
You may want to use this article as a guide to determine if the songs are on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
If the missing songs were purchased from the iTunes Store, see this article for the steps to download them again:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Best Regards,
Jeremy -
Function module to choose the file for download and upload
what is the function module to choose the file for download and upload for presentation server.
give me with examplePlease search in SCN.
This has been discussed so many times.
Maybe you are looking for
-
Audio/Animation Bug, with a work-around
This is one of those cases where TechSupport believes a work-around is fine to something I would consider a bug. Took me a while to find the solution so I'd like to share with everyone my problem/solution. Background: I have a presentation with recor
-
Middle mouse click no longer works after recent update
I noticed after updating about 3 days ago that clicking the scroll wheel no longer acts as middle click on my MX Revolution mouse from logitech anymore. Pressing on the scroll wheel use to act as middle mouse click, now it just switches between scrol
-
hi all, is there any table related to fields 'material', 'movement type' and 'PO posting date' ? regards saurabh.
-
VPC on Nexus 5000 with Catalyst 6500 (no VSS)
Hi, I'm pretty new on the Nexus and UCS world so I have some many questions I hope you can help on getting some answers. The diagram below is the configuration we are looking to deploy, that way because we do not have VSS on the 6500 switches so we c
-
CS3 bugs fixed for intel macs?????????
CS2 when it came out was not designed for the Intel processor so there was problems until adobe managed to iron out the problems. The only issue is CS2 the performance is not as great as it should be due to this. Is CS3 fully compatible with Intel ma