Cluster Setup Support Rules fails with Warnings

Hi,
I'm in the process of installing our ECC production server in a clustered environment on windows server 2008 with SQL server 2008 as our database.
The MSCS cluster at the OS level has been configured successfully. When I start the SQL server installation as mentioned in the installation guide, the Setup Support Rules fails with following warnings.
1. The setup support file prompts me to set the MSDTC service as a clustered one but it was not mentioned anywhere in the installation guide that the MSDTC service needs to be clustered. Do I need to cluster that service with seperate network ip address and cluster group ?
2. The Network binding order issues a warning even though the adapters are set up in the right order as mentioned in the installation guide.
3. Eventhough there is a internet connectivity available in the server, the "Microsoft .Net Application Security" check issues a warning.
NB: As per the cluster validation report, the clustering at the OS level seems to be fine.
Please provide me your valuable suggestions to rectify these warnings. Can I ignore these warnings and proceed with the installation of SQL Server ?
Regards,
Varadharajan M

Hi,
Microsoft Distributed Transaction Coordinator
Is is user by older versions of Mssql database.
From a SAP perspective you don't need this service.
You can ignore setup request for this service.
As per the reply, I understand that the MSDTC service is not mandatory to cluster in Windows Server 2008/MS SQL Server 2008. But when i try to install the SQL DB, the Set support rule ends up with warnings saying that the MSDTC service should be clustered. Can I ignore the warnings and proceed with the installation. Can anyone confirm this please ?
Also please confirm whether we need to have the db cluster group in the DNS before initiating the SQL Server Set up.
Regards,
Varadharajan M

Similar Messages

Sql server 2008 r2 setup support rules missing cluster node

i have error on install sql r2 there are problems in cluster node its failed on windows 8

Hi ,
Before you install SQL Server on a computer that is running Windows 8, about Microsoft SQL Server 2008 , you must apply and install Microsoft SQL Server 2008 R2 Service Pack 1 or a later after the initial setup is complete. To install a SQL Server failover
cluster, you must create and configure a failover cluster instance by running SQL Server setup. For more information, see:
Installing a SQL Server 2008 R2 Failover Cluster: http://msdn.microsoft.com/en-us/library/ms179410(v=sql.105).aspx
In addition, as other post, could you please help us to collect the detailed error message and the following error log? It is very useful for our research.
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\LOG\Summary.txt.
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Export scheduler job but chain step and chain rule failed with ORA-24150 ORA-06512 during executed sql script.

Hi Folks,
I used expdp utility to export all Oracle scheduler jobs and chains with below method, after that generate sql script by impdp, later on executing sql script encountered some errors.
Only chain step and chain rule for executing script. Does anyone bright me some light? Thanks!
My env: Oracle 11g + Oracle Linux 5.5
My steps as below:
1. export(expdp) oracle scheduler job(chain)
2. generate sql script by impdp.
3. remove orginal scheduler job(chain)
4. execute sql script
5. job with no chain well but job with chain failed
[oracle@linux1 ~]$ expdp scott/tiger directory=db_dump_dir dumpfile=scott_job.dmp include=procobj:\" in $select \
> name from sys.obj$ where type\# in \(46,59,66,67,68,69,72,74,79$\)\" schemas=scott
Export: Release 11.2.0.1.0 - Production on Tue Dec 3 17:42:31 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
Starting "SCOTT"."SYS_EXPORT_SCHEMA_01": scott/******** directory=db_dump_dir dumpfile=scott_job.dmp include=procobj:" in (select name from sys.obj$ where type# in (46,59,66,67,68,69,72,74,79))" schemas=scott
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
Master table "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SCOTT.SYS_EXPORT_SCHEMA_01 is:
/u03/database/usbo/BNR/dump/scott_job.dmp
Job "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully completed at 17:42:54
[oracle@linux1 ~]$ impdp scott/tiger sqlfile=scott_job.sql directory=db_dump_dir dumpfile=scott_job.dmp logfile=imp_scott_job.log
Import: Release 11.2.0.1.0 - Production on Tue Dec 3 17:43:04 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
Master table "SCOTT"."SYS_SQL_FILE_FULL_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_SQL_FILE_FULL_01": scott/******** sqlfile=scott_job.sql directory=db_dump_dir dumpfile=scott_job.dmp logfile=imp_scott_job.log
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
Job "SCOTT"."SYS_SQL_FILE_FULL_01" successfully completed at 17:43:07
[oracle@linux1 ~]$ more /u03/database/usbo/BNR/dump/scott_job.
scott_job.dmp scott_job.sql
[oracle@linux1 ~]$ more /u03/database/usbo/BNR/dump/scott_job.sql
-- CONNECT SCOTT
ALTER SESSION SET EVENTS '10150 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10904 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '25475 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10407 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '10851 TRACE NAME CONTEXT FOREVER, LEVEL 1';
ALTER SESSION SET EVENTS '22830 TRACE NAME CONTEXT FOREVER, LEVEL 192 ';
-- new object type path: SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_1"','1=1',NULL, 'First link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_2"',':"CHAIN_STEP_1".COMPLETED = ''TRUE''',NULL, 'Second link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_3"',':"CHAIN_STEP_2".COMPLETED = ''TRUE''',NULL, 'Third link in the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule('"SCOTT"','"CHAIN_RULE_4"',':"CHAIN_STEP_3".COMPLETED = ''TRUE''',NULL, 'End of the chain.',0,NULL);
END;
COMMIT;
END;
BEGIN
BEGIN
dbms_rule_imp_obj.import_rule_set('"SCHED_RULESET$1"','"SCHED_EV_CTX$1"',NULL, 0);
END;
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_1"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_1'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for first link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_3"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_3'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for last link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_program('"TEST_PROC_2"','PLSQL_BLOCK',
'BEGIN
                         INSERT INTO tb_schduler (id, descr, cr_date)
                         VALUES (tb_schduler_seq.NEXTVAL, ''test_proc_2'', SYSDATE);
                         COMMIT;
                       END;'
,0, TRUE,
'Program for second link in the chain.'
COMMIT;
END;
BEGIN
dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
, rule_set_name=>'"SCHED_RULESET$1"   '
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
COMMIT;
END;
BEGIN
dbms_scheduler.create_job('"TEST_CHAIN_1_JOB"',
job_type=>'CHAIN', job_action=>
'test_chain_1'
, number_of_arguments=>0,
start_date=>TO_TIMESTAMP_TZ('03-DEC-2013 05.38.56.718161000 PM +08:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'), repeat_interval=>
'freq=minutely; interval=2'
, end_date=>TO_TIMESTAMP_TZ('03-DEC-2013 06.08.56.000000000 PM +08:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'),
job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>TRUE,comments=>
NULL
COMMIT;
END;
[oracle@linux1 ~]$ export ORACLE_SID=usbo
[oracle@linux1 ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Dec 3 17:44:43 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
sys@USBO> show parameter db_name
NAME                                 TYPE                              VALUE
db_name                              string                            usbo
sys@USBO> conn scott/tiger;
Connected.
--remove job and chain.
scott@USBO> EXEC DBMS_SCHEDULER.drop_job(job_name => 'test_chain_1_job');
EXEC DBMS_SCHEDULER.drop_chain (chain_name => 'test_chain_1');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_1');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_2');
EXEC DBMS_SCHEDULER.drop_program (program_name => 'test_proc_3');
PL/SQL procedure successfully completed.
scott@USBO> @/u03/database/usbo/BNR/dump/scott_job.sql
Session altered.
Session altered.
Session altered.
Session altered.
Session altered.
Session altered.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-24150: evaluation context SCOTT.SCHED_EV_CTX$1 does not exist
ORA-06512: at "SYS.DBMS_RULEADM_INTERNAL", line 28
ORA-06512: at "SYS.DBMS_RULE_IMP_OBJ", line 40
ORA-06512: at line 3
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
PL/SQL procedure successfully completed.

Thanks all of you!
Hi DK2010,
I took some test that the data dict(dba_rule_sets/dba_evaluation_contexts) no any data returned after I had removed the job.
So I tried to create evaluation context and re-executed script(only exception setion.) the first error has gone. For the second still have some issue.
---->no any returned
scott@USBO> select * from dba_rule_sets where rule_set_owner='SCOTT';
no rows selected
scott@USBO> select * from dba_evaluation_contexts WHERE evaluation_context_owner='SCOTT';
no rows selected
-->add new EVALUATION CONTEXT
scott@USBO> exec DBMS_RULE_ADM.CREATE_EVALUATION_CONTEXT('SCOTT.SCHED_EV_CTX$1');
PL/SQL procedure successfully completed.
--->now it looks fine
scott@USBO> BEGIN
2 BEGIN
3 dbms_rule_imp_obj.import_rule_set('"SCHED_RULESET$1"','"SCHED_EV_CTX$1"',NULL, 0);
4 END;
5
6 COMMIT;
7 END;
8 /
PL/SQL procedure successfully completed.
--->add new rule set, it prompt aleady exists
scott@USBO> exec DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1')
BEGIN DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1'); END;
ERROR at line 1:
ORA-24153: rule set SCOTT.SCHED_RULESET$1 already exists
ORA-06512: at "SYS.DBMS_RULEADM_INTERNAL", line 28
ORA-06512: at "SYS.DBMS_RULE_ADM", line 138
ORA-06512: at line 1
-->chain rule still could not find.
scott@USBO> @job_chain_rules.sql
no rows selected
-->rerun
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-27477: "SCOTT.TEST_CHAIN_1" already exists
ORA-06512: at "SYS.DBMS_ISCHED", line 1148
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1598
ORA-06512: at line 2
-->drop chain
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1');
BEGIN dbms_scheduler.drop_chain('TEST_CHAIN_1'); END;
ERROR at line 1:
ORA-27479: Cannot drop "SCOTT.TEST_CHAIN_1" because other objects depend on it
ORA-06512: at "SYS.DBMS_ISCHED", line 1319
ORA-06512: at "SYS.DBMS_ISCHED", line 1222
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1854
ORA-06512: at line 1
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1',force=>TRUE);
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist   --->still returned no rule set
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
scott@USBO> exec DBMS_RULE_ADM.CREATE_RULE_SET('SCOTT.SCHED_RULESET$1')
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-27477: "SCOTT.TEST_CHAIN_1" already exists
ORA-06512: at "SYS.DBMS_ISCHED", line 1148
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1598
ORA-06512: at line 2
scott@USBO> exec dbms_scheduler.drop_chain('TEST_CHAIN_1',force=>TRUE);
PL/SQL procedure successfully completed.
scott@USBO> BEGIN
2 dbms_scheduler.create_chain('"TEST_CHAIN_1"', evaluation_interval=>NULL, comments=>'A test chain.'
3 , rule_set_name=>'"SCHED_RULESET$1"   '
4 );
5 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_1"', program_name=>'"TEST_PROC_1"');
6 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_2"', program_name=>'"TEST_PROC_2"');
7 dbms_scheduler.define_chain_step('"TEST_CHAIN_1"', step_name=>'"CHAIN_STEP_3"', program_name=>'"TEST_PROC_3"');
8 COMMIT;
9 END;
10 /
BEGIN
ERROR at line 1:
ORA-24141: rule set SCOTT.SCHED_RULESET$1 does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_ISCHED", line 1694
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1638
ORA-06512: at line 5
Would you like to give me more clue?
Thanks again.

BAM Cluster setup - issue with whole server migration configuration

HI,
We are working on a SOA , BAM , BPM Cluster setup on OEL VMs
With Admin server running on Host1 and Soa_server1, BAM_server1 , Host2 - Soa_server2 , Bam_server2.
We were successfully able to setup clustering for Soa without using the webTier utilities in our environment, Just by adding entries in the /etc/hosts file.
Followed the document - except for web tier setup
http://www.namredlek.nl/orasoa/InstallSOASuite11gOnCluster_v1.pdf
1)     Installed Weblogic 11g.
2)     Soa 11g.
3)     Domain creation
4) Configured Node manager
5) Soa Clustering completed successfully.
6) Domain up and running with SOA_Cluster up and running.
7)     Extended the domain with BAM
The issue revolves when we are doing teh Migration configurations from the console for BAM and we restart BAM server we get an error -
Apr 14, 2011 2:30:35 AM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'bam_server1'
java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
and Bam server goes to Failed Not Restartable state.

The error is clearly out there
java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
This error occurs due to a failure in adding the virtual IP of BAM server to the network interface you have specified in nodemanager.properties.
You need to check whether you have specified the correct interface and subnet mask in node manager.properties as below :
The fourth step is to edit the Node Manager's properties file. This file is called nodemanager.properties
and is located in the ORACLE_BASE/product/osbmw/wlserver_10.3/common/nodemanager directory.
For server migration to work properly, you need to add the properties listed below:
Interface=eth0
NetMask=255.255.255.0
UseMACBroadcast=true
· Interface
This property specifies the interface name for the floating IP (for example, eth0).
· NetMask
This property specifies the net mask for the interface for the floating IP. The net mask should the
same as the net mask on the interface; 255.255.255.0 is used as an example in this document.
· UseMACBroadcast
This property specifies whether or not to use a node's MAC address when sending ARP packets,
that is, whether or not to use the -b flag in the arping command.

2012 New Cluster Adding A Storage Pool fails with Error Code 0x8007139F

Trying to setup a brand new cluster (first node) on Server 2012. Hardware passes cluster validation tests and consists of a dell 2950 with an MD1000 JBOD enclosure configured with a bunch of 7.2K RPM SAS and 15k SAS Drives. There is no RAID card or any other
storage fabric, just a SAS adapter and an external enclosure.
I can create a regular storage pool just fine and access it with no issues on the same box when I don't add it to the cluster. However when I try to add it to the cluster I keep getting these errors on adding a disk:
Error Code: 0x8007139F if I try to add a disk (The group or resource is not in the correct state to perform the requested operation)
When adding the Pool I get this error:
Error Code 0x80070016 The Device Does not recognize the command
Full Error on adding the pool
Cluster resource 'Cluster Pool 1' of type 'Storage Pool' in clustered role 'b645f6ed-38e4-11e2-93f4-001517b8960b' failed. The error code was '0x16' ('The device does not recognize the command.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
if I try to just add the raw disks to the storage -- without using a pool or anything - almost every one of them but one fails with incorrect function except for one (a 7.2K RPM SAS drive). I cannot see any difference between it and the other disks. Any
ideas? The error codes aren't anything helpful. I would imagine there's something in the drive configuration or hardware I am missing here I just don't know what considering the validation is passing and I am meeting the listed prerequisites.
If I can provide any more details that would assist please let me know. Kind of at a loss here.

Hi,
You mentioned you use Dell MD 1000 as storage, Dell MD 1000 is Direct Attached Storage (DAS)
Windows Server cluster do support DAS storage, Failover clusters include improvements to the way the cluster communicates with storage, improving the performance of a storage area network (SAN) or direct attached storage (DAS).
But the Raid controller PERC 5/6 in MD 1000 may not support cluster technology. I did find its official article, but I found its next generation MD 1200 use Raid controller PERC H 800 is still not support cluster technology.
You may contact Dell to check that.
For more information please refer to following MS articles:
Technical Guidebook for PowerVault MD1200 and MD 1220
http://www.dell.com/downloads/global/products/pvaul/en/storage-powervault-md12x0-technical-guidebook.pdf
Dell™ PERC 6/i, PERC 6/E and CERC 6/I User’s Guide
http://support.dell.com/support/edocs/storage/RAID/PERC6/en/PDF/en_ug.pdf
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Exchange 2013 cu3 setup fails with 'problem... validating the state of Active Directory... supplied credential... invalid'

Windows Server 2013; Exchange Server 2013 with Cumulative Update 1
Cannot install Cumulative Update 3 for Exchange Server 2013. It fails with
[xxx] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid. See the Exchange setup log for more information on this error.
[xxx] [0] [ERROR] Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid.
[xxx] [0] [ERROR] The supplied credential is invalid.
(Crosses - XXX - replace original values.)
I have found that a few others have experienced the same problem but found no solution, nor could come up with anything myself. If it is any hint, Event 40961 was logged in the Event Viewer around the same time on almost all installation attempts to be purely
conincidental:
The Security System could not establish a secured connection with the server
ldap/xxx.xxx/[email protected] No authentication protocol was available.
Both Windows Server and Exchange Server otherwise work OK, and do not recall any issues with Cumlative Update 1 installation.

Hi vhr1,
Based on my knowledge, the Event ID 40961 is a warning message.
This behavior occurs when we restart the server that was promoted to a DC. The Windows Time service tries to authenticate before Directory Services has started.
Found some resources for your reference even if the Exchange Version is mismatched:
http://blogs.technet.com/b/jhoward/archive/2005/04/20/403946.aspx
http://support.microsoft.com/kb/823712/en-us
About the error message, "Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid."
The error message InvalidCredentials means: the wrong password was supplied or the SASL credentials cannot be processed.
Found a similar thread for your reference, hope it is helpful:
http://social.technet.microsoft.com/Forums/en-US/98e26ad6-8e43-4ef5-8ff9-e9fee6e76bda/bind-operation-is-invalid?forum=exchangesvrdeploylegacy
Feel free to contact me if there is any problem.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

Cluster Creation Failed with Ambari AppManager

Hi,
I am getting this error when creating cluster
(cluster create --name hdp --distro HDP-1.3.2 --appManager Ambari --networkName Hadoop_NW)
serengeti>appmanager list
NAME DESCRIPTION TYPE URL
Default Default application manager Default
ambari AmbariServer Ambari http://10.6.55.239:8080
==========================
It seems that agent on the host is not able to connect to the server but the problem is the Ambari Server is not located at localhost:8080 how can i change it to ambari server's address.
Running setup agent script...
==========================
{'exitstatus': 1, 'log': "Host registration aborted. Ambari Agent host cannot reach Ambari Server 'localhost:8080'. Please check the network connectivity between the Ambari Agent host and the Ambari Server"}
Connection to node1.hadooptest.com closed.
SSH command execution finished
host=node1.hadooptest.com, exitcode=1
ERROR: Bootstrap of host node1.hadooptest.com fails because previous action finished with non-zero exit code (1)
ERROR MESSAGE: tcgetattr: Invalid argument
Connection to node1.hadooptest.com closed.
STDOUT: {'exitstatus': 1, 'log': "Host registration aborted. Ambari Agent host cannot reach Ambari Server 'localhost:8080'. Please check the network connectivity between the Ambari Agent host and the Ambari Server"}
Connection to node1.hadooptest.com closed.

Hi Qing,
Thanks for the solution its solved the earlier problem but now i got a new one. According to the error Failed to start ping port listener of:[Errno 98] Address already in use" This the only address on the lan .... what can be causing this issue ?
Mohsin
The failed nodes: 1
[NAME] hdp2-worker-0
[STATUS] VM Ready
[Error Message] ==========================
Copying common functions script...
==========================
scp /usr/lib/python2.6/site-packages/common_functions
host=node5.hadooptest.com, exitcode=0
==========================
Copying OS type check script...
==========================
scp /usr/lib/python2.6/site-packages/ambari_server/os_check_type.py
host=node5.hadooptest.com, exitcode=0
==========================
Running OS type check...
==========================
Cluster primary/cluster OS type is redhat6 and local/current OS type is redhat6
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Checking 'sudo' package on remote host...
==========================
sudo-1.8.6p3-12.el6.x86_64
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Copying repo file to 'tmp' folder...
==========================
scp /etc/yum.repos.d/ambari.repo
host=node5.hadooptest.com, exitcode=0
==========================
Moving file to repo dir...
==========================
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Copying setup script file...
==========================
scp /usr/lib/python2.6/site-packages/ambari_server/setupAgent.py
host=node5.hadooptest.com, exitcode=0
==========================
Running setup agent script...
==========================
Restarting ambari-agent
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Found ambari-agent PID: 1682
Stopping ambari-agent
Removing PID file at /var/run/ambari-agent/ambari-agent.pid
ambari-agent successfully stopped
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Checking for previously running Ambari Agent...
Starting ambari-agent
Verifying ambari-agent process status...
ERROR: ambari-agent start failed
Agent out at: /var/log/ambari-agent/ambari-agent.out
Agent log at: /var/log/ambari-agent/ambari-agent.log
('INFO 2015-04-01 06:19:59,137 HostCheckReportFileHandler.py:109 - Creating host check file at /var/lib/ambari-agent/data/hostcheck.result
INFO 2015-04-01 06:19:59,205 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:09,207 Heartbeat.py:76 - Sending heartbeat with response id: 1 and timestamp: 1427869209207. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:09,251 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:19,252 Heartbeat.py:76 - Sending heartbeat with response id: 2 and timestamp: 1427869219252. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:19,296 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:29,296 Heartbeat.py:76 - Sending heartbeat with response id: 3 and timestamp: 1427869229296. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:29,340 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:39,340 Heartbeat.py:76 - Sending heartbeat with response id: 4 and timestamp: 1427869239340. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:39,384 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:49,384 Heartbeat.py:76 - Sending heartbeat with response id: 5 and timestamp: 1427869249384. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:49,428 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:59,429 Heartbeat.py:76 - Sending heartbeat with response id: 6 and timestamp: 1427869259429. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:21:05,061 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,870 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,871 DataCleaner.py:36 - Data cleanup thread started
INFO 2015-04-01 06:21:10,875 DataCleaner.py:71 - Data cleanup started
INFO 2015-04-01 06:21:10,876 DataCleaner.py:73 - Data cleanup finished
ERROR 2015-04-01 06:21:10,877 PingPortListener.py:44 - Failed to start ping port listener of:[Errno 98] Address already in use
INFO 2015-04-01 06:21:10,877 PingPortListener.py:52 - Ping port listener killed
', None)
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=255
ERROR: Bootstrap of host node5.hadooptest.com fails because previous action finished with non-zero exit code (255)
ERROR MESSAGE: tcgetattr: Invalid argument
Connection to node5.hadooptest.com closed.
STDOUT: Restarting ambari-agent
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Found ambari-agent PID: 1682
Stopping ambari-agent
Removing PID file at /var/run/ambari-agent/ambari-agent.pid
ambari-agent successfully stopped
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Checking for previously running Ambari Agent...
Starting ambari-agent
Verifying ambari-agent process status...
ERROR: ambari-agent start failed
Agent out at: /var/log/ambari-agent/ambari-agent.out
Agent log at: /var/log/ambari-agent/ambari-agent.log
('INFO 2015-04-01 06:19:59,137 HostCheckReportFileHandler.py:109 - Creating host check file at /var/lib/ambari-agent/data/hostcheck.result
INFO 2015-04-01 06:19:59,205 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:09,207 Heartbeat.py:76 - Sending heartbeat with response id: 1 and timestamp: 1427869209207. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:09,251 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:19,252 Heartbeat.py:76 - Sending heartbeat with response id: 2 and timestamp: 1427869219252. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:19,296 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:29,296 Heartbeat.py:76 - Sending heartbeat with response id: 3 and timestamp: 1427869229296. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:29,340 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:39,340 Heartbeat.py:76 - Sending heartbeat with response id: 4 and timestamp: 1427869239340. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:39,384 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:49,384 Heartbeat.py:76 - Sending heartbeat with response id: 5 and timestamp: 1427869249384. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:49,428 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:59,429 Heartbeat.py:76 - Sending heartbeat with response id: 6 and timestamp: 1427869259429. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:21:05,061 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,870 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,871 DataCleaner.py:36 - Data cleanup thread started
INFO 2015-04-01 06:21:10,875 DataCleaner.py:71 - Data cleanup started
INFO 2015-04-01 06:21:10,876 DataCleaner.py:73 - Data cleanup finished
ERROR 2015-04-01 06:21:10,877 PingPortListener.py:44 - Failed to start ping port listener of:[Errno 98] Address already in use
INFO 2015-04-01 06:21:10,877 PingPortListener.py:52 - Ping port listener killed
', None)
Connection to node5.hadooptest.com closed.
cluster hdp2 resume failed: Task execution failed: An exception happens when App_Manager (Ambari) creates the cluster: (hdp2). Creation fails..

Adding server in DAG failing with error Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25) failed with 0x800706ba. Error: The RPC server is unavailable

Hi, Below is teh environments
DC: Win 2008 R2 SP1
Exchange Server OS: Win 2012 R2 Std
Exchange : 2013 SP1 Ent
Two Servers with CAS+MB role, already part of one DAG. I am trying to add one new server in existing DAG. The installation of exchange 2013 competed successfully. However when i am adding it to the existing DAG, the below error is coming. Please help
to solve the issue. Thanks in advance.
A server-side database availability group administrative operation failed with a transient error. Please try the operation again. Error: An error occurred while attempting a cluster operation. Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25)
failed with 0x800706ba. Error: The RPC server is unavailable" [Server: cluster owner FQDN]
Manu

Hi Manu,
As Deepak mentioned, please try to enable IPv6 on all member servers first.
Based on my research, In Microsoft Exchange Server 2013, IPv6 is supported only when IPv4 is also installed and enabled. If Exchange 2013 is deployed in this configuration, and the network supports IPv4 and IPv6, all Exchange servers can send data to and
receive data from devices, servers, and clients that use IPv6 addresses.
Please also configure or disable Firewall to allow the connection.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Firefox setup fails with WIN ME

I have tried to install Firefox 3.5 and 8 on a Win ME system - both fail with "Setup causes an error in Setup". Firefox 2 was okay. Messages from Firefox suggest an update is necessary,but I can't because setup does not work.
I also cannnot provide FEEDBACK - because it suggests I need "The latest version" which I cannot install "simply" as it suggests on the feedback page. Is this a probplem with ME - as other browsers like IE and Chrome latest versions do not seem to like it either....am I stuck with old versions?

The last version of Firefox compatible with Windows ME is Firefox 2.0.0.20 which is no longer supported or updated and '''''may contain security and stability issues''''':
*System requirements Firefox 2: https://www.mozilla.org/en-US/firefox/2.0/system-requirements/index.html
*Firefox 2.0.0.20 Download for Windows (choose interface language): ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/
All subsequent versions require a minimum of Windows 2000:
*System requirements: [https://www.mozilla.org/en-US/firefox/3.0/system-requirements/index.html Firefox 3] [https://www.mozilla.org/en-US/firefox/3.5/system-requirements/index.html Firefox 3.5] [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6] [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] ß[https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

RAID 1 setup fails with POSIX error

I am trying to set up a RAID 1 array using 2 brand-new Iomega eGo 2TB Desktop Hard Drives. They are connected via Firewire 800, with the second connected to the first through Firewire pass-through. I'm on 10.6.8, on an iMac 9,1 with the 2.66Ghz Core 2 duo and 8GB RAM.
I complete all the steps to create the RAID array, add the drives to the array, select "Automatically rebuild RAID mirror sets", and when I hit "create", Disk Utility unmounts the disk, starts to create the array, and then gives me the following error.
Creating RAID set failed with the error:
POSIX reports: The operation couldn't be completed. Operation not permitted.
Am I doing something wrong in the setup? Does this mean one of the drives is a dud? Does this mean I can't create a RAID array with pass-through Firewire drives?
Any help or advice would be greatly appreciated.

I ran the 1.1.1 upgrade this afternoon. I've been through the same process three times, but I was getting error 1602. Now when I unplug, reboot the Mac and reboot the phone, wait for everything to load, iPhoto recognizes the camera/pictures, but iTunes does not recognize the iPhone, and when it does, I get the spinning color wheel until I'm told that my iPhone timed out (or I get the error message above again). I've not hacked the iPhone, and even though iTunes isn't recognizing it, the phone is as fully functional as it was before the ill fated upgrade.
There is a support article but it appears to be geared towards Windows.
Error 1601 or 1602 when restoring iPhone or iPod touch in iTunes
Issue
When trying to restore your iPhone in iTunes, you may see the following message followed by an error code 1601 or 1602:
The iPhone could not be restored. An unknown error occurred.
Or when trying to restore your iPod touch in iTunes, you may see the following message:
The iPod "[username]" could not be restored. An unknown error occurred (1602)
Products affected
iPhone
iPod touch
iTunes 7.4 or later
Solution
Restart the computer and try to restore the iPhone or iPod touch again.
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes. Select the appropriate link below for instructions on how to accomplish this for your operating system.
Windows XP
Windows Vista
Try restoring the iPhone or iPod touch on a different computer using iTunes (if another computer is available).
Message was edited by: Lane Baysden

I am trying to download & install Photoshop 6 but setup fails with "Installer failed to initialize

I am trying to download & install Photoshop 6 but setup fails with "Installer failed to initialize Download Adobe Support Advisor" I then downloaded and ran the Support Advisor; it reported NO problems.
I can still can not load Photoshop 6!

Lw_jr01 to clarify when you are trying to install Photoshop CS6 you are receving the error message that the, "Installer Failed to Initialize." Is that correct? If so which operating system are you using?

Setup Team Foundation Server - Team Site Collection - SharePoint Web Application Settings failed with error TF205014, TF250025

Hi
I have TFS server installed and working with other SharePoint farm. (TFS installed, SharePoint extension installed and Granted Access for TFS.
When Setup TFS - SharePoint Web Application Settings, It ask for the three values:
Web Application URL:
Central Administration URL:
Default Location of team project collection sites:
What notice about the TFS sites that are working is that they are Path Based Site Collection. Created with SharePoint Web Application managed path (like
http://spserver/sites/tfs_site1) and so it easy to see it will work.
Web Application URL: http://spserver
CA URL :   http://spserver:portnumber
Default Location : Sites or any managed path
We start using Host Name Site Collection (HNSC) to get the benefit of multiple unique site name without having multiple web application for each. Work great but when we tried to setup and extend TFS service on the HNSC, we could
not get them to work and got errors when trying different variation of path URL.
After doing lot of searching on this, I came up pretty empty and I don't know if that is possible so my question is Have anyone able to setup TFS to work with SharePoint 2013 Host Name Site Collection?
If you have, a simple yes will be great but please share or even if anyone think it is possible or not possible, please share too.
Thanks in advance for any comment / suggestion.
Swanl

Hi Swanl,
I’m afraid that we cannot setup TFS to work with SharePoint 2013 Host Name Site Collection.
Also you can initial a new thread in Visual Studio Team Foundation Server forums：
Team Foundation Server – General: http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
More experts for Team Foundation Server will assist you, then you will get more information relation to your issue.
For integrating SharePoint 2013 with Team Foundation Server 2013 you can have a look at the following blog:
http://nakedalm.com/integrate-sharepoint-2013-with-team-foundation-server-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Java 2 runtime Environment setup failed with a return code of -1

Hi!
I have tried to install sdk 1_3_1_01 on Windows 2000 with ServicePack 2 and the error "Java 2 runtime Environment setup failed with a return code of -1" occured. As I saw, a lot of people has the problem but couldn't find a solution on this page!
Please help !
Me

I've installed 1.3.1_01 on both W2K Workstation and Server, no problem. There's a bug report, but no workaround or solution.
http://developer.java.sun.com/developer/bugParade/bugs/4412291.html
and it's supposedly 'fixed' in 1.4.0 beta.
http://java.sun.com/j2se/1.4/fixedbugs/fixedbugs-beta2.html
You might try installing the beta version
http://java.sun.com/j2se/

Cluster Setup Support Rules fails with Warnings

Similar Messages

Maybe you are looking for