Create a Support Message in Production system showing up in Solution Manage
Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul
Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.
Similar Messages
-
Support Message Status should default to Incident in Solution Manager
Hi Friends
Need your Help!!
I need to change the Priority settings set for the support message in Solution Manager , If a user logs a support message in the ECC system (production) with any priority (low, medium, high, very high etc.) it should default to Incident in Solution manager.
From there the client wants to classify the Priority as per his requirement in Solution Manager.
The current settings are like below
For a Low Priority it is defaulting to Incident
For a Medium Priority it is defaulting to 1: Bug P1-2
For a High priority it is defaulting to 2: Bug P3-4
For a Very High Priority it is defaulting to 3: Bug P5-10
Really appreciate your help, many thanks.
Kind Regards,
Vattikonda.Hi
thank you for response.
It is the clients requirement to default the priority status to Incident if a support message is created from a managed system (ECC).
for e.g,
An user creates a support message in ECC production client giving the relevant input and he selects the priority as High, this created message should default to Incident in solution manager.
please see how the current settings are from my earlier at the bottom..
Kind Regards,
Sandeep. -
Error while creating a support message in satellite system
Hi,
I am facing an error while sending a support message to solman form the satellite system
(( Error Description : Error in Local Message System: Error when opening
an RFC connection Message was Not Created ))
1) I gone through various threads and set the required authorizations like
SAP_SUPPDESK_CREATE and
SAP_SV_FDB_NOTIF_BC_ADMIN ,
SAP_SUPPDESK_ADMIN
for the user in the solman .
2) I checked the RFC connection and it is working fine.
Anyone pls help me to resolve this issuehi rohit,
thanks for u r immmediate response
do i have to assign the roles to the user in the satellite system or the solman.
some roles in those 4 roles are not in the satellite system.
thanks
Rahul -
SOLMAN EHP1 - anyone can create support message in Satellite System's Help?
Hi,
I just curios that why everyone can create support message in satellite system-> help -> create support message?
I tested with restricted profile user and without role SAP_SUPPDESK_CREATE, NO BP created but he still manage to create support message???? Any idea??
Also, same goes to any user can process ticket in SOLMAN with no BP-Employee role and SAP_SUPPDESK_* roles assigned.
Your kind input is very much appreciated.
Thanks,
Nicholas ChangHi Nicholas
If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
The user entered in the RFC details probably has the authorization to create Support desk messages.
Regards
Amit -
Create support message in satellite system
Hi,
What are the pre-requisites to configure creating support message in satellite system.
Thanks
RajeshHi,
Follow this blog u can set up ur service desk
mainly it comprises of roles table entry and rfc destination in satellite systems
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
hope it solves ur problem
Regards
Prakhar -
Create Support Message from external system
HI experts,
I would like to change the Create Support Message screen(Menu->Help->Create Support Message) and add three fields namely: Category, Subject and Solution Number because currently these fields are not populated in the Service desk if I create message in this way unlike in using NOTIF_CREATE tcode where there are selection fields for these.
Also, I'm creating the support message from an external SAP system and the messsage is sent to the Solution Manager system. The NOTIF_CREATE tcode does not exist in the external system as well as the whole package DSWP.
Please let me know you rthoughts on this.
Thanks
EricHi guys,
Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
As you will notice, there are lots of standard objects that I've changed. =)
My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
Thanks,
Eric -
With SP16-17 we can't create support message from satellite system anymore
hello,
We have implemented the support package 16 and 17 SAPKITL427 in solution manager last week-end and since then all satellite systems can not create support message anymore.
The process is perfectly working in solman itself and we don't think we have thus a process customizing issue here but who knows...
The key user creates the message with the help -> create support message
and when he saves it (clicking the mailbox button) he gets the following error
Error in Local Message System: Function not available Message was Not
Created
In fact the error Message is BCOS088
We debugged the function BCOS_CREATE_MSG and we found out that the function
DNO_OW_CREATE_NOTIFICATION is returning error code 1.
We checked out RFC connection and it looks ok
There is no dumps in ST22, no error in SLG1 in both system...a nightmare
The notification SLF1 is created in solman but the status field of the notification is empty and it looks that the record is somehow corrupted because you can't modify it with dnotifwl.
Due to the fact that the notification is not correctly created the support message is also not created.
SAP and our solman consultant are working on it since 2 days but don't have a clue. Maybe some program where no regenerated correctly ?
If you would have any idea in which direction to look, i would greatly appreciate
thanks a lot
best regards Xavierhi Rohit,
on the satellit I have the following versions
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C PI_BASIS 2005_1_700
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-In
SAP_BW 700 0013 SAPKW70013 SAP NetWeaver BI 7.0
SAP_AP 700 0009 SAPKNA7009 SAP Application Platform
SAP_HR 600 0018 SAPKE60018 Human Resources
SAP_APPL 600 0010 SAPKH60010 Logistics and Accounting
EA-IPPE 400 0010 SAPKGPID10 SAP iPPE
EA-APPL 600 0010 SAPKGPAD10 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0010 SAPKGPDD10 SAP Enterprise Extension Defense Forces & Public Security
EA-HR 600 0018 SAPKGPHD18 SAP Enterprise Extension HR
EA-FINSERV 600 0010 SAPKGPFD10 SAP Enterprise Extension Financial Services
FINBASIS 600 0010 SAPK-60010INFINBASIS Fin. Basis
EA-PS 600 0010 SAPKGPPD10 SAP Enterprise Extension Public Services
EA-RETAIL 600 0010 SAPKGPRD10 SAP Enterprise Extension Retail
EA-GLTRADE 600 0010 SAPKGPGD10 SAP Enterprise Extension Global Trade
IS-PS-CA 600 0010 SAPK-60010INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-OIL 600 0010 SAPK-60010INISOIL IS-OIL
IS-M 600 0010 SAPK-60010INISM SAP MEDIA
IS-H 600 0010 SAPK-60010INISH SAP Healthcare
IS-CWM 600 0010 SAPK-60010INISCWM Industry Solution Catch Weight Management
INSURANCE 600 0010 SAPK-60010ININSURANC SAP Insurance
FI-CAX 600 0010 SAPK-60010INFICAX FI-CA Extended
FI-CA 600 0010 SAPK-60010INFICA FI-CA
ERECRUIT 600 0010 SAPK-60010INERECRUIT E-Recruiting
ECC-DIMP 600 0010 SAPK-60010INECCDIMP DIMP
IS-UT 600 0010 SAPK-60010INISUT SAP Utilities/Telecommunication
SEM-BW 600 0010 SAPKGS6010 SEM-BW: Strategic Enterprise Management
LSOFE 600 0010 SAPK-60010INLSOFE SAP Learning Solution Front-End
ST-A/PI 01K_ECC600 0000 - Application Servicetools for ECC 600
APICON 1470000000 0000 - APICON GmbH, Interface Add ON
thank you Xavier -
Roles required to create support message from satellite system
Hi Team,
I am trying to create support message from satellite system. i have assigned S_RFC and S_RFCACL to the Zrole. Apart from that, is there any other roles to be assined in satelite system to create support message?
Regards
KumarI think that's it.
Of course they roles in the central system too: SAP_SV_FDB_NOTIF_BC_ADMIN and SAP_SUPPDESK_CREATE (or copies thereof).
Regards,
Sean -
ERROR when Trying to Create Support Message in Satillite system
Hi,
I have configured Service Desk in solution manager, when i try to send a Support Message(Help ->Create Support Message) from satillite system to Solution Manager i got this ERROR msg. "Error in local message system; message 000000000001 not complete".
Help me to sort out this.....Hey ...I had a same problem last week...
I'm unable copy the Weblog / upload the document ...Any way follow below steps.
1)Go To Transaction Code SPPFCADM in Solution manager
select DNO_NOTIF and click on 'Define action profile and actions
Select action profile 'SLFN0001_STANDARD_DNO'
2)choose action definition 'SLFN0001_STANDARD_DNO_CRM' and click on
the processing types
3)delete the container expression ITEM_PRODUCT_ID
Refer SAP Note 1011376
Hope this helps you.
Praveen, -
Creating Support Messages from Satellite System without SolMan user account
Hi
We are having some problems with users "creating support message" from our ECC system to SolMan, if the user does not have a user account in Solution Manager.
It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
Regards
LarsHi,
you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
With this TA, it is easy to create BP for each satellite system.
Best regards
Marc -
Error creating Service Desk Message in Satellite System
Hi all
We have two satellite system from which I want to create a Support Message. With my current profile/role and can do it from one system and not from the other system. I get "Error in local message system, message xxx not complete". I dont think it is an Authotization fault, but not sure.
How should the Number ranges be setup for more than one satellite system?
Thanx
Jaco SnymanHi Tina
This was my answer in a previuos thread:
Hi all
I also struggled with this for 2 weeks. But the problem is fixed.
Do your "normal: config from the IMG and then:
1) Make sure that you have selected for the system NOT to check for the User in SolMan
tr: DNO_CUST04, Go to Detail, Select the field NO_USER_CHECK, "X", this is very important, otherwise you will have to create a username for everyone on the satellite system... far too timeconsuming.
2) In your satellite system under OSS_MSG: Col1:Application: OSS_MSG, Col2: + : W. Col3: RFC Destination: SM_"SOLMANRFC"_BACK. Col4: + : CUST620. COl5: + : 1.0
In the Solman side you maintain Col3 as "NONE".
3) Make sure that ALL users in the satellite system has the following roles: SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN.
4) Make sure that you have TRUSTED RFC to and from your Satellite system and Solution Manager.
The main one to be sure of is: SAP_ALL for all SOLMANxxx user in the Solution Manager system for every satelite system, because the standard roles from SAP does not work.
This should have your Service Desk Messaging working.
Jaco Snyman -
Created several DART extracts in Production System - OSS Notes
We have created several DART extracts in Production System and we are getting some error messages
Below Views are missing
view 0sap_BKPF is not existing
view 0sap_BSEG is not existing
view 0sap_BSET is not existing
view 0sap_Ekko is not existing
view 0sap_MKPF is not existing
view 0sap_MSEG is not existing
view 0sap_T003 is not exisiting
view 0sap_VBRK is not existing
Below Fields are missing
Field A001-A002AFABE is unknown in 2 below views
0sap_AMMST and 0sap_AMTRN
Edited by: TheGaurav on Jul 16, 2010 11:10 AMHi,
the note 611648 should help.
Br
Attila -
Problem when create a support massage from another system
dear Support,
we are work in our system with support massage to the service desk in the solution manager,
we are create the massage from the source system and it open a massage in the service desk in the solution manager
when we create a support massage it's send mail with the name of who open the massage, (For example : naors, benisa)
my problem is that in 1 source system when i open the massage the mail send in a name of user basis (i think it's meen that the massage send the mail from user in the solution manager and no the user that open the massage)
-i create a BP partner in solution manager and generate him in Tz BP_GEN
but it's still send the mail from user "basis"
besr regards
Naor ShalomHi
Is the IBase filled in that particular ticket correct,please check?
have you generated the ibase in IB_52 for this system too?
Regards
Prakhar -
System Monitoring Setup in Solution Manager
Hello Experts,
We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
Currenly we have installed below SAP Systems
1.Solution Manager Server
2.ECC server (Without Ides) - Abap
3.CRM Server (Without Ides) -Abap + Java
We need to setup below tasks in Solution Manager
1.Early watch alert
2.System Monitoring
3.Central System Administration
4.Business Process Monitoring
5.Service Level reporting
1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
Could you please someone give input reg this.
Thanks
Thirumal
Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AMHi,
Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
A. Yes.
Check with links for
1.Early watch alert
This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
To be able to use it, you have:
maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
RFC u2013 Connections between: and an RFC u2013 Connections established.
your satellite systems and the SAP Solution Manager system
SAP Solution Manager and the SAP Service Marketplace
Solution Manager system and Solution Manager Diagnostics
Cf: Solution Manager IMG (transaction SPRO).
checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
set-up your systems in a solution landscape in the SAP Solution Manager
configured Solution Manager Diagnostics
2.System Monitoring
The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
3.Central System Administration
You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
The SAP Solution Manager system copies the data from the local CCMS.
The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
4.Business Process Monitoring
The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
5.Service Level reporting
http://service.sap.com/solutionmanager for all solman tasks as given below.
http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
Regards,
Srini Nookala -
System monitoring configuration in solution manager EHP1
Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
RohitI'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt
Maybe you are looking for
-
Itunes not picking up Iphone?
Help, my itunes isn't picking up my iphone.. It been happening for a while back before Christmas but I didn't think much of it i thought it would sort itself out. But today is my upgrade to the new iphone 4s and i don't want to have the same difficul
-
Table Problems after Word Export from RH8
I am running RoboHelp HTML 8 as part of Technical Communications Suite 2 on Windows XP Professional and exporting to Word 2007. This is a recent upgrade. Previously, I was just running RoboHelp 8 without TCS. All of the Adobe software is completely p
-
Following is my Query unable to update when Executed table gets lock Execution does not stop even for an hour. update Employees set Status = 'Close' where statusid IN (select statusid from MyView
-
Main Computer infected with virus
My Son has a Dell running Windows XP2 Home Edition. Fortunately he has not connected his ipod since the virus appeared. The dell is in the shop but is an old unit and the virus cannot be cleaned without a system complete restore to original. I have p
-
My video also shows up under music...
I just bought The Waterboy and it shows up under videos just fine and it works and everything but if I go to music I can turn it on in music folder it plays as if it is a music file I can watch it in both sideways modes and the normal mode which is a