Create Currency Conversion on Infoset

Hi Expert,
I face the problem, when i used currency conversion on the query (that query I created on infoset).
I have already created the Currency conversion on calmonth. , but i dont know why that variable is not visible on that query when i want to select it.
Can the expert give the advise?
I will give the point if it;s helpfull.
Thanks in advance.
Siandari

Hello ,
I have a infoset on which I want to use currency conversion.Currency conversion works fine on infoset , but I can not choose time reference from variable in rscur where I create conversion type to use in infoset queries. 
I want to make a currency conversion on a specific date which users enter in variable screen.
In an ODS or infocube query I can use conversion types on which I  create time reference from variable .
So all currency conversions are done on a specific date.
But in infoset queries I can not make  currency conversion on a   variable.
Does anyone has a problem like me? What is your solution ?
Thanks all.

Similar Messages

  • Currency Conversion type not visible in the query

    Hi ,
    I created one currency type conversion   Z_INR
    exchange rate type : M
    Exchange rate from infoobject : zexch_rate(key fig)
    source curr from data record
    Fixed target curr : INR
    Variable time reference  : A to Exact Day
    Special info object : Ztr_date (Transaction date)
    it got saved succesfully but wen i try to include  this in the query its not visible there . can anyone let me know why this problem is coming
    help will be appreciated .
    i also included rate and date in the query still not visible

    Hi,
    Create Currency conversion type using Trans: RRC1.
    1.Specify your Exchange rate type.                     
    2.Dynamic Exchange rate type
    3.Source curency from data rec.
    4.Fixed currency say USD.
    5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
    Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
    Thanks,
    Nagesh
    Sony Singapore

  • Currency conversion by Calendar month in the query?

    Hellow...
    Users want DB currencies when executing query at first. And then want to change currency conversion by Calendar month in the query, if navigating by target currency. Tried as created TEST Currency Translation Key. Database currency is different currencies.
    Appreciate your help.
    Don.

    Hi,
    Create Currency conversion type using Trans: RRC1.
    1.Specify your Exchange rate type.                     
    2.Dynamic Exchange rate type
    3.Source curency from data rec.
    4.Fixed currency say USD.
    5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
    Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
    Thanks,
    Nagesh
    Sony Singapore

  • Currency Conversion - update rules for average rate

    I am working in BI 7.0
    I have a currency conversion I have defined with RSCUR with the exchange rate type 'M' defined in SPRO -> General Settings -> Currencies -> Exchange Rate Types.  The currency conversion takes place in my update rules.  I've set my 'Time Reference' to 'End of Period'.
    I want the conversion to be an average of all rates for the fiscal period.  If I check my table using 'OB08', I find my conversion is only using the rate for the last day of the Fiscal Period.  It is not averaging all the rates.
    My question is this.  Can I actually average all the rates for the fiscal period using RSCUR?  Do I need to have the people on the R/3 side have the rates be averages?  Meaning, the rates they update are not currency rates for that specific day but a running average for the month?
    What are the best practices for average rates for currency translations for update rules based on a Fiscal Period?
    Edited by: Michael Pepper on Mar 3, 2008 8:37 AM

    Hi MIchel,
                   If you  want the conversion to be an average of all rates for the fiscal period.
    Check under the cloumn ExRt
    you may find some row as description as "Average exchange rate"
    Create  Currency Conversion type with that exrt type.
    use this Currency Conversion type in u'r query for u'r keyfigure.
    hope this will be helpfull...........for this you can contact Fi people.
    Regards,
    Vijay.

  • Currency conversion issue while creating PO from Shopping cart

    Hello Experts,
    I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
    Scenario:
    Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
    But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
    the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
    Please give me some idea how to fix this issue.
    Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
    Regards
    Pratap J

    Hello,
    Read information available in KBA 1862453.
    It mentions this issue.
    Regards,
    Ricardo

  • Unable to create shopping cart due to currency conversion error.

    Hi,
    We are currently working in a extended classic scenario. We have about 8 users connected under a common entity ( dept). Out of which for one user (user1) we are able to create the shopping cart and able to run the entire procurement cycle the entire cycle.
    When we are trying to create a SHC with any other user ( user2 to 8)  its giving the errors like
    1) Currency Conversion Error ( to GBP). Please inform help desk.
    2) Error in account assignment for item 0.
    Attributes for all the users ( user1 to user8) are same and we are not getting any error in the attribute check as well.
    Please suggest.

    Look up note 419423 + related notes to repair incorrect SRM users. What you report sounds a bit strange. A debugging session might be helpful too. Especially the 2nd error looks like something 'home-made'...

  • *Currency Conversion created in BW BEX query not working in BO report:*

    Hi,
    We have created a key figure with currency conversion and working fine in BEX when I execute that query.
    But when created a BO universe and WEBI report on that query, I am getting following error.
    "MDX query failed to execute with Error".
    Can anyone please help.
    Thanks
    Dhana

    Hi
    Thanks. But new problem.
    When I pulled OCURRENCY to free area now it is working in BO also.
    But now another problem is --> for Currency translation am getting prompt in BO also to select target currency. There , all values (all currency types) are not displayed , only USD is coming. WEBI report is fine for USD conversion.
    But when I want to convert into AUD , its not there in LOVs .
    Some time back this problem exists in Bex also, but when we changed cube level setting as below:
    Infocube : display-> OCURRENCY right click and go to "provider specific properties"..and then
    go to "object specific properties "  and then for "Query Exec Filter Val" selected "M Values in Master data table".
    Now when executing query in Bex for target currency selection values it is taking from master data and displaying all types like USD, AUD, INR ..etc. in drop down list.
    Now created new BO universe and new WEBI report but only USD is coming in selection LOVs not all types.
    Please help us.
    Thanks
    Dhana.

  • Creating and using a calculated field in business rule from the currency conversion of another field.

    Hello,
    I'm creating a calculated field with a set currency for a business rule. I'm planning to use it as a deficiency criteria. I want the values to come from the currency conversion of another field. Can someone provide me the step by step procedure on how to do it?
    Some documents would be great.
    I've been trying to do it on my own but I've gotten lost.
    Thank you.

    Thank you for all your help above.
    Just to confirm your advice, am I right with the following conclusions? :
    1. The script (function) to fill the text field with the modification date of a different PDF file needs to be stored in a folder level .js file.
    2. The document containing the text field needs to call the .js function either within the document script or within the custom script property of the text field itself.
    Further to that can you just advise on the syntax for accessing the modification date of the other document.
    Do I need to assign a variable to the address of the file to be used, and then use this variable in the text form filling script (as below) or can I use a direct file reference at the .modDate command.
    var LastSync = "C:\sync\bin\lastsync.pdf";
    var strMsg = util.printd("h:MM tt",LastSync.modDate) + " on ";
    strMsg += util.printd("dddd, d mmmm, yyyy",LastSync.modDate);
    this.getField("LastSyncDate").value = strMsg;
    If the syntax is totally different to the above I would be very grateful for some guidance in the right direction.
    I much appreciate your time to help me ... I'm almost there.
    Kind Regards,
    Nifty

  • BEX Currency conversion created by the business

    Hello,
      I need to convert from USD to other currencies defined by the users in R/3. So the business figures the exchange rate in R/3 and I need to take that value and use it for converting the date in BEx.  Any help?  This is a very urgent requirement so anything would be great.

    Hi,
    You can set up currency converison in the bex query by right clicking the KF and choosing the currency conversion type and a fixed currency to convert to, or providing a variable where users can decide the currency they want.
    To get the rates into BW you can schedule a job (RSIMPCURR) with daily frequency.
    See here for more:
    http://help.sap.com/saphelp_nw04/helpdata/en/ec/076f3b6c980c3be10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a682de07211d2acb80000e829fbfe/content.htm
    Re: Transfer Exchange RatesHi,
    Hope this helps...

  • Currency Conversion problem in query designer

    Hi,
    A requirement has come that infoobject which contain multiple currency type, need to convert into a single currency type in Bex reporting as user want to see only one currency value in report.
    There are three keyfigures refering different calenders for conversion. For examle . GR amount is based on GR date, IR amount is based on IR date and PO amount is based on Doc date. Query is build based on a infoset.
    I am doing following steps to achieve the task::
    1. In TCODE - RSCUR, created three Currency Conversion Type each for GR, IR and PO and each one refering different 0calday calender
    2. Defined exchange Rate Type as "M"
    3. Currency Tab -> Source Currency = "Source Currency from data Record"
        Target Currency -> Fixed Target Currency = "USD"
    4. Time Ref. Tab -> Fixed Time ref. = "Current Date"
        Variable time reference = "To the exact day"
        Special InfoObject = <InfoObject name>
    5. In query designer, Key figure property for GR amount -> Conversion -> Conversion type = <Name of Currency Conversion Type which defined in RSCUR>
    6. Repeated the same for IR Amount and PO Amount key figure
    While saving, getting following error::
    *Cannot apply Currency translation type <Currency type name> in Infocube <Infoset name>. *
    Diagnosis
    You tried to translate a query element with the currency translation type <Currency type name>. The translation type <Currency type name>, however, has variable time reference or variable target currency relevant to characteristic Document Date. Characteristic Document Date is also not available in InfoProvider <Infoset name> and it references either none or more than one characteristic () of the InfoProvider for Document Date, or Document Date is not a base characteristic.
    System Response
    Procedure
    Adjust the query definition or create a special currency translation type for one of the characteristics .
    Please help!
    Please note that there are three key figures which need conversion using different calenders.
    Sanjiv

    Hello,
    I have done the same what you said, but same error still showing.... 
    I also tried to change from "Special InfoObject" to Infoset level and it works with one KF. Since all three KF are under one Infoset and there is limitation that if Currency Conversion Type is defined on Infoset level then only one KF will be assigned for a Infoset where as I am using three KFs with three relevant time characteristic.
    Any suggesion from others?
    Sanjiv

  • Currency Translation Type in queries using currency conversion

    I have a question on the Currency Translation Type (EUR_VAR) that is used in all of the queries using currency conversion on the fly. (currency is maintained automatically nor in table.)
    User wants to use 2 different exchange rates in a single query. The months in 2010 (Actuals) are to
    be converted using Xchangerate-type EURO and the months in 2011 (Planned) to use Xchangerate-type USD.
    But store different rates with different starting dates. This is however not possible because the Currency Translation
    Type is set-up (1) to work with Query Key date - rather than a characteristic in the data and (2) apparently these
    currency translation types only work with time characteristics like 0fiscyear
    My idea is therefor to:
    1. Create a new variable (similar to EXC_RATE) to prompt for a 2nd Exchange Rate type when query starts
    2. Create a new Currency Translation Type (next to EUR_VAR), referencing the new variable or sticking to fixed Xrate type, fixed to EUR
    Is this possible to create Idea (2)
    Many Thanks in Advance.

    The best way would be to create two curr conversion types , one converting to EUR and other to USD .Put them in properties of coressponding KFs in query.For timref in RSCUR , variable time ref can be used individually for two conv types.

  • Currency Conversion  on Piticular date

    Dear All,
                   I have a requirement where in I have to convert the  Purchase Document Currency into USD on  PO Creation Date.
    I did the Currency Conversion in the BEX by creating a currency translation type using the tcode RSCUR. Following are the   settings I have Used for Conversion
    1. Exchange rate type  M
    2  target currency         USD.
    3 Time reference          Current Date.
    Problem is the values are not getting converted to USD on PO Creation date.
    Moreover I wanted the records whose values are more than 50,000 USD.
    Question.
    How to convert the currency from one to another on a Particular date.
    Date for each record is different from one another as stated above.
    Help me out in this case.
    Thank You All
    Regards
    Mahesh

    Dear Raj,
    Thank you for the reply.
    Iam using BI 7 and the tcode rrc1 is obselete in this version.
    So I went to the new tcode rscur and created the currency translation type with the settings below.
    1. Exchange rate type M
    2 Target currency USD.
    3 Time reference Current Date.
    Used this translation key in the Key figure properties for currency translation.
    I went to the source system and on context menu I transferred global settings.
    Do I need to maintain currency keys and exchange rates manually even after transferring global settings?
    I have set in the time reference the PO creation date
    as Special Info Object. Will this work?
    Please let me know.
    Regards,
    Mahesh

  • Issue regarding currency conversion

    Hi Experts,
    I'm having issue with currency conversion. Default report output values are displaying in 'EURO' and I had created a toolabar with currency conversion buttons. When this button is selected, values has to be changed into user select currency like INR, USD, AUD. Here im triggering with issues, all the values are converted into 0's. Total value is only converting for first time. From next time. its not converting. I'm using FM's  CONVERT_FOREIGN_TO_FOREIGN_CUR,CONVERT_TO_LOCAL_CURRENCY,READ_EXCHANGE_RATE.
    Please provide ur solutions to solve the issue.  
    Thanks and Regards,
    Bharat

    Hi ,
    You can use this block of code..It is used in our project.
      data : l_rate type ukurs_curr,           "Exchange rate
             l_rate_type type kurst_curr,      "Type of rate
             l_l_fact type i,                  "Local factor
             l_f_fact type i.                  "Foreign factor
    check local currency ,foreign currency local amount are not initial
      check foreign_currency is not initial and
            local_currency is not initial and
            local_amount is not initial.
    Calculate exchange rate
        if local_currency = 'MXN' and foreign_currency = 'USD'.
          l_rate_type = 'MXNT'.
       else.
         l_rate_type = 'M'.
       endif.
    *Call FUNCTION module to get exchange rate
      call function 'READ_EXCHANGE_RATE'
        exporting
          date                    = sy-datum
          foreign_currency        = local_currency
          local_currency          = foreign_currency
          type_of_rate            = l_rate_type
       importing
         exchange_rate           = l_rate
         foreign_factor          = l_f_fact
         local_factor            = l_l_fact
       exceptions
         no_rate_found           = 1
         no_factors_found        = 2
         no_spread_found         = 3
         derived_2_times         = 4
         overflow                = 5
         zero_rate               = 6
         others                  = 7
      if sy-subrc eq 0.
    if l_rate le 0.
      l_rate = l_rate * -1.
    endif.
    Foreign amount
      if l_rate_type = 'MXNT'.
        foreign_amount = local_amount / l_rate .
      else.
        foreign_amount = local_amount * l_rate .
    endif.
      endif.

  • Currency conversion error in SAP HANA

    Hi,
    I am new to SAP HANA and learning to create information views in HANA studio (SAP HANA SP6 on Cloudshare, HANA studio 1.0.68). I am trying to create a simple analytic view (on purchaseOrderItem table in SAP_HANA_EPM_DEMO sample database) to have GrossAmount converted to EUR.
    I added a calculated column as follows:
    When i click on "OK", i get error -
    The check box “Calculate before aggregation” has been unchecked, because the definition of the calculated column contains measures with currency conversion, restricted measures or operands with input parameters. For such a calculated column the calculation is always done after the aggregation."
    and checkbox "calculate before aggregation" get unchecked. See screenshot below:
    Please suggest what could be reason? Thanks in advance.
    Regards,
    Amit

    Hi Amit,
    If you uncheck the "Calculate before aggregation" checkbox and activate the view, you will see in the generated log that a Calc scenario is created. (a view with /olap wrapper). Due to the calc scenario, the aggregation is defined as the default behavior for the KFs and hence the calculation cannot be done before aggregation.
    By the way, I did not understand why do you need calculate before aggregation for a KF which is just a copy of another KF. If you need Gross amount in Local currency and EUR, then just perform the currency conversion without "Calculate before aggregation" checkbox. It will work.
    Regards,
    Ravi

  • Credit memo request with currency conversion to EURO

    I have a requirement in which i need to create a Credit Memo Request for the newly created sales organisation using the old billing document number created for old sales organisation.New sales org will have its currency changed to EURO.I referred to a FM named 'Pricing' where the currency conversion is done.
    The requirement is to get the current price in EURO from the price list instead of currency conversion to EUR.The current price has to be extracted from new pricelist.
    Your inputs in this regard is highly appreciated.

    HI
        Am not on SAP system now, so will try to give you
    info with what i can recollect.
       You can use FM: SD_SALESDOCUMENT_CREATE for creating
    Credit Memo Request. Note that reference document and
    reference type should be passed for identifying the
    reference document as invoice. Please consider these as
    initial inputs to explore on the same. Regarding the
    pricing, it can be configured either at order type or
    copy control to carry out new pricing so it can take
    directly from condition records.
        Hope the above info can help you in exploring on the same.
    Kind Regards
    Eswar

Maybe you are looking for