Creating Sales Order for Item Category TATX (Text)

How can I create Sales order for text item where no material master has been maintained?
It does not give me any conditions and no accounting document.
What I need to do if I want to create that with a value?
Thanks
ST

Hi,
Its not possible to create an SO w/o material code.
But you can create an dummy material.
This dummy material can be just an refer to create an SO.
Do refer the below help doc which may help you..
Settings in the Material Master (Dummy-Material) - mySAP Engineering &amp; Construction - SAP Library

Similar Messages

Credit Check while creation of Sales Order for Item Category Purchase Req

Hi Experts,
We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
The settings were same for all the Item categories.
1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
Thanks
Rajanikanth

Hi,
None of the Item Categories has Create PO Automatically.
Thanks
Rajanikanth

Sale order with item category TAN not getting displayed in md04

Hi,
We have a sale order with item category TAN, Schedule line category CP, MRP type ND and availability check as 07. This is not getting reflected in md04. But item category TAB gets displayed under the PR number.
Please let me know what checks to be made or changes to be done for the sale order with item category TAN to get displayed in md04 screen
Thanks & Regards

Hi all,
I changed the MRP type to PD, and from the next sale order, line item onwards, it was getting displayed in md04 screen. The already created one anyway dint get reflected. So I had to delete the line item and create a new one.
Thanks all for the help
Regards,
Jegashree

Duplication of Purchase Order while creating sales orders for a customer

when we try to create sales order for one customer it have to create by picking up the purchase order from the table linearly.
But the problem is that here when we are trying to create multiple sales orders the same purchase order is being picked.
for example..when we create sales order 1 the purchase order picked is PO1 and
for creation of sales order 2 the same purchase order PO1 is being picked up instead of PO2.
No idocs are being generated in this, even to check them..
How shall i resolve this...? Please help me out ASAP

Hi Kumar,
Thanks for the reply. But actually the problem is that this is related to some customized table in the project. When a EDI Batch job runs in the background then automatically the SO is created and the PO is being picked from the table(custom table) and then posted against the respective SO. we are not aware of that job which is triggering this to debug. Once if we can know that particular batch job or pgm or edi or idoc what ever it is then we can debug.
Do you have any idea how can we find that particular pgm/edi/idoc/job name which triggers this creation of SO?

Creating Sales Order for "Payer" thru VA01 trans.

Dear All,
In our project, we have stations which r Sold-to-party and Credit customers which is a Payer.
We have to create Sales order for both Stations and Credit customers. Creating Sales order for Station is not a problem but each station has many credit customers, which are maintained in the Station.
When we are creating Sales Order via VA01 for a particular credit customer, we are entering Station as a sold-to-party and it asks for Payer which is the Credit customer for that station.But when we are recording through SHDB transaction it is not asking for payer(credit customer for that station).
Please let me know of BAPI or some other method to create sales order for credit customer(Payer).
Kindly help at the earliest.
Thanks and Regards,
Sudipto.

Hi,
There is TABLES parameter where you can pass the PARTNERS information. I am not sure of the parameter name but it would refer to something like BAPIPAR.
Regards,
Ravi
Note : Please mark all the helpful answers.

BAPIs to create sales orders for Returns and Debit Memo Request

Hi,
I have to create a sales order for document type Returns as well as a debit memo request.The BAPI 'BAPI_SALESORDER_CREATEFROMDAT2' is giving the following error message for Debit Memo Request document creation as well as for Returns.
761 Unpermitted combination of business object BUS2032 and sales doc. category L
I found BAPIs:
BAPI_CUSTOMERRETURN_CREATE for creating sales document of type ZDRE and SD document category H.
BAPI_DEBITREQUEST_PROXY_CREATE for creating sales document of type ZDDR and SD document category L.
please let me know if anybody have used them. If so what values need to be passed to I_UPLOAD_ID,I_DESTIN,I_SFA_REL parameters of BAPI_DEBITREQUEST_PROXY_CREATE. Are there any alternative solutions using the Salesorder bapi.
I have to create documents based on the flat file data no reference sales document numbers are available.
Appreciate your help..
Good Day
Regards
Bhargavi

Look at the code done by me
Program Name:                                                        *
SAP Name    : ZAXXXXXX               Version    :                    *
Programmer : Chris Dong of ITDC                    *
Description :                                                        *
Includes        :                                                    *
Function Modules: XX_XXXXXX                                          *
Transactions    :                                                    *
Programs        :                                                    *
REPORT XXXXXXXX LINE-SIZE 80
                 LINE-COUNT 65
                 MESSAGE-ID ZA
                 NO STANDARD PAGE HEADING.
CLEAR l_order_partners.
l_order_partners-partn_role = 'AG'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
CLEAR l_order_partners.
l_order_partners-partn_role = 'WE'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
Sales document type
l_order_header_in-doc_type = 'ZDR'.
Sales organization
l_order_header_in-sales_org = '1000'.
Distribution channel
l_order_header_in-distr_chan = '01'.
Division
l_order_header_in-division = '04'.
REF DOCUMENT
l_order_header_in-REF_DOC = '9100000144'.
order reason
l_order_header_in-ord_reason = '925'.
item number
l_order_items_in-itm_number = '000001'.
material no
l_order_items_in-material = '000000000007000012'.
Qty
l_order_items_in-target_qty = '0000000000100.000'.
APPEND l_order_items_in TO li_order_items_in.
*BUS2094 Credit memo request " OSS NOTE 93091
*BUS2096 Debit memo request " OSS NOTE 93091
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
EXPORTING
ORDER_HEADER_IN = l_order_header_in
BUSINESS_OBJECT = 'BUS2096'
WITHOUT_COMMIT = ' '
CONVERT_PARVW_AUART = ' '
IMPORTING
SALESDOCUMENT = l_vbeln
RETURN = li_return
TABLES
ORDER_ITEMS_IN = li_order_items_in
ORDER_PARTNERS = li_order_partners
Message was edited by:
        Chris Dong
null

Sales Order Line item category not getting Re detemining Correctly

Dear all,
            I need help regarding the Sales order item category redetermination.
            we are having two item categories YNAE and YNAG and it contains schedule line categories CP and CB ( i.e for item         category YNAE schedule line category is CP and for item category YNAG schedule line category is CB),
for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
         Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and it is working fine .
         But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule line on SAVE and its delivary dates are also not getting determined properly. If i press the option ATP check at the schedule line level than very things will getting corrected.
   I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
Regards,
Vaddepally Manoj

USEREXIT_PRICING_PREPARE_TKOMP is the wrong location - that exit is for pricing communication preparation only. Your primary location for item category determination is USEREXIT_SOURCE_DETERMINATION (MV45AFZB). In your simple scenario, you could consider making an availability check at this point with some assumptions and then assign the item category accordingly. Otherwise, you can re-assign item category and schedule line category in USEREXIT_MOVE_FIELD_TO_VBEP. The exit is called once before ATP (for ATP-relevant schedule line categories) and once afterwards. The call is recursive if you re-assign another ATP-relevant category.

Sales Order - Using Item Category 'TAB' - Individual Purchase Order

All,
I am configuring for the first time utilizing Sales Document Item category "TAB" - Individual Purchase Order. I have a few questions:
Is there a best practice configuration guide specific for this process? I have found the 'third party' document/best practice, but nothing so far on "individual purchase order from sales order'.
Is there a way to default Purchase Order Type "UB" stock transfer from the Purchase Requisition NB? I thought this could be done based on the schedule line "CB" configuration, changing the 'item category' to 7 stock transfer, then this would carry into the mapping for purchase requisition type NB/item category stock transfer to purchase order type UB/item category stock transfer. However, when I set '7' on the schedule line CB, I then receive a hard error when creating my purchase req to set the supplying plant. I have more than one supplying plant, so I'm not sure if setting the '7' is the right setting for this process. From what I've been able to find for documentation, the item category of the schedule line should be set to '0' standard.
When I perform the post Goods Issue 601 of Special Stock "E" - to the customer (once the stock has been received into the right plant), the system is not creating an Accounting/FI Document to relieve the inventory and charge cost of goods sold. I have reviewed automatic account assignment entries and these appear correct for 601 E. Are there special settings for special stock "E" that I need to consider.
If you cannot answer all of these questions, but can answer one of them, I am most interested in teh last question above.
Regards,
Sandra Miner

Hi Reazuddin,
What I don't understand is why:
if I don't create PO --> I can create Outobund Delivery in Individual Purchase Order but if I create PO (not MIGO) I cannot create OBD in IPO. (Note: in both cases I agree PGI is not possible)
The flowchart is: Sale Order (IPO) --> Purchase Requisition --> Purchase Order (PO) --> MIGO (inbound delivery) --> MIRO (Vendor invoice verification) --> Outbound delivery ( delivery [OBD] + picking + posting[PGI]) --> Sales Invoice
As per your comments:
System will not stop you to create delivery, though you customize delivery item cat: as Check min qtty "0" - error message. because system checks for PGI qtty, but not the delivery qtty.
But then in the case I create Sale order (IPO) + PO (without MIGO) --> the system should not stop me executing Outbound Delivery. It should stop me only if I execute Posting goods issue. But actually in this case, the system is stopping me at outbound delivery.
I agree with Posting Goods Issue behaviour. It is logical in the following cases:
Only Sale order (IPO) created --> PGI is not possible
Sale Order (IPO) created + PO created --> PGI is not possible
Sale Order (IPO) created + PO created + MIGO executed (inbound) --> PGI is possible.
Thank you very much for your feedback.
Regards,
Alberto Ramos.

Returnable Packing - Sales order maintainance / Item Category determination

Gurus,
I have question about returnable packing regarding sales order entry and item category determination
1) Sales order : Should we do entry of returnable packing in Sales Order as a regular item
Example : The material M1 - 100unites needs returnable packing materials PK1 5 unites.
Therefore in sales order it should be entered as below
M1 - 100unites
PK1 - 5unites
Please commnet.
2) Item category determination should be done at sales document level
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (???) = TAL
Please commnet.
Regards,
Ashish

Hi
Yes Ashish you need to enter the returnable as a separate item in the sales order
For qn no 2 the item categories of higher levelitems can be TAN and TAX
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (blank) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAN) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAX)=TAL
Note returnable packing items are creates as a separate materials with material type as LEIH and item category group as LEIH
How to bring back the returnable packaging stocks to your plant
Creating a Returnable Packaging Pick-Up
Create a sales order using order type LA /AT.
Enter the required data on the customer, the returnable packaging, and the plant to which the materials are to be returned.
Enter all other relevant data and save the order.
Create a returns delivery for the sales order when the materials reach your company.
The system proposes delivery type LR automatically. The transaction is completed by the goods receipt posting which initiates a transfer posting from the customer's special stock to your plant stock.
Regards
Raja

Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

Created sales order for one division, for which the material belongs to ano

Dear All,
A sales order has been created for a division 10, for which the material belongs to some other division 20 in material master.
When we are create a sales order for 10 division ( the one which we give at organzational data) at the item level the material which we select should also belong to the same division, if the material division is different as 20 the system will throw an error at sales order saying "ship-to-party so and so is not created for the sales area so and so.."
But here it's allowing me to create a sales order for division 10 with 20 Division material without any error. But this should not happen.
Checked in the document type VOV8 where at the Check division field 2 has been there.
Please suggest

Hello,
Let me explain the concept of Header division and item division...the header division is the one which gets copied from the sales area division that gets determined in the sales doc creation from SP.
The item division is the division that gets copied from the material master in the line item material.
In the Sales document type , there is a check box "Item Division". If this is marked, then system takes the division from the Mat master. if this is not marked system the system doesnt find from MMR instead it picks up from header division.
The check division controls, how the system should behave in case the header and item division differ..
Rgds,
Rags.

Create Sales Order for Repair

Hi All,
I want to create a Repair Sales Order using BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'.
When I create the order using tcode VA01 it asks me to enter Material, Servicable Material and the Repair Information.
How can I pass the Servicable Material and the Repair Information to the above BAPI.
Any help will be appreciated.
Regards,
Shubham

Hi
Please refer to the following documentation.
Method
SalesOrder.CreateFromDat2
Sales order: Create Sales Order
Functionality
You can use this method to create sales orders.
You must enter at least sales order header data (via ORDER_HEADER_IN structure) and partner data (via the ORDER_PARTNERS table) as input parameters.
Enter the item data via the ORDER_ITEMS_IN table. You can allocate item numbers manually, by filling in the relevant fields, or the system does it, according to the settings for Customizing, by leaving the relevant fields blank.
If you have configurable items, you must enter the configuration data in the ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_PART_OF and ORDER_CFGS_VALUE tables.
Credit cards can be transferred via the BAPICCARD structure, on the one hand, data for card identification, on the other, data for a transaction which has taken place in an external system.
Once you have created the sales order successfully, you will receive the document number (SALESDOCUMENT field). Any errors that may occur will be announced via the RETURN parameter.
If no sales area has been created in the sales order header, then the system creates the sales area from the sold-to party or ship-to party, who has been entered in the partner table. If a clear sales area cannot be created, you will receive a system message, and the sales order will not be created.
Notes
Mandatory entries:
ORDER_HEADER_IN : DOC_TYPE Sales document type
SALES_ORG Sales organization
DISTR_CHAN Distribution channel
DIVISION Division
ORDER_PARTNERS..: PARTN_ROLE Partner role, SP sold-to party
PARTN_NUMB Customer number
ORDER_ITEMS_IN..: MATERIAL Material number
Ship-to party:
If no ship-to party is entered, use the following: Ship-to party =
sold-to party.
Commit control:
The BAPI does not have a database commit. This means that the relevant application must leave the commit, in order that can be carried out on on the database. The BAPI BAPI_TRANSACTION_COMMIT is available for this.
German key words:
The following key words must be entered in German, independantly of
the logon language:
DOC_TYPE Sales document type, for example: TA for standard order
PARTN_ROLE Partner role, for example: WE for ship-to party
Further Information
You can find further information in the OSS. The note 93091 contains general information on the BAPIs in SD.
Regards
Inder

Suppresing Delivery note prints for certain sales order types/item category

Hi
I need to find a way of suppressing some delivery notes from being printed.
Relating to orders for consignment fill up and consignment issue.
The delivery notes are needed to be printed for 'Consignment fill up order' type, BUT not for Consignment issue - as this is confusing some of the warehouse staff at month end.
All have the same delivery type, the only difference i can see is the item category types are different
Is there a way i can use the sales order type, with customer number as an access sequence for the Output type ?
- Or the Item category type ?
Is it possible to add sales order type or Item category into the FIELD CATALOG :- output for deliveries
Your help would be much appreciated
Cheers
Tony

Hi,
I can suggest you something, but do remember that I've never done such kind of thing till date.
>> Copy LF and create new delivery type
>> Assign this to your consignment doc. types
>> Kindly remove the Header output determination procedure assigned to this new delivery type
>> Then assign output det. procedure at Item level {according to Item category}
>> Then check if will cater to your requirment or not.
Please keep one thing in mind that I am giving you a proposal by thinking in one logical way and I can't confirm the practicality of the proposal.
Hrishi

Pricing for Item Category TATX

Dear All,
Is it possible to maintain price for text item, i had tried by creating new item category as copy as TATX item category with Pricing = X (Standard) but still i am not able to enter order qty and pricing.
pls help,
Dhiraj

Could you give more background why you need to use a text item in your process? I suggest to use a service material for example with item category group WERT where you only need the basic view and sales view in material master. You can then automatically copy the tax classification needed for pricing from the material master. I don't actually know whether a text item can carry a price, but since you for example can't maintain any price master for it, it doesn't seem to be very useful. In my opinion a material number is always better and even faster to use, even though it takes a minute to create the material master. Then again you can use the same material number for all your "text item" purposes, after you've extended it to all needed plants and divisions.

Sales Order - Using Item Category "TAB Individual PO" / convert PReq to PO

All,
I am configuring for the first time utilizing Sales Document Item category "TAB" - Individual Purchase Order. I have a few questions:
Is there a best practice/baseline package configuration guide specific for this process? I have found the 'third party' baseline package J54, but nothing so far on "individual purchase order from sales order'.
During Purchase Order Create from the Purchase Req. is there a way to default Purchase Order Type "UB" stock transfer from the Purchase Requisition type NB? Currently in my system, the PO type defaulting is NB and it needs to be UB. I thought this could be done based on the schedule line "CB" configuration (spro/SD/Sales/Sales Docs/Schedule Lines/Define Schedule Lines), changing the 'item category' to 7 stock transfer. Then, for the configuration setting spro/MM/Purchasig/Purchase Req/ Define Document Types, this would carry into the mapping for purchase requisition type NB/item category stock transfer to purchase order type UB/item category stock transfer. However, when I set '7' on the schedule line CB, I then receive a hard error when creating my purchase req to set the supplying plant. I have more than one supplying plant, so I'm not sure if setting the '7' for schedule line CB is the right setting for this process. From what I've been able to find for documentation, the item category of the schedule line should be set to '0' standard. My plan is to convert the PReq's into PO's in background, but I need to default the correct PO Type. Any help would be useful.
Regards,
Sandra Miner

Hello,
would you be so kind and provide note number?
Andrzej

Creating Sales Order for Item Category TATX (Text)

Similar Messages

Maybe you are looking for