Suppresing Delivery note prints for certain sales order types/item category

Hi
I need to find a way of suppressing some delivery notes from being printed.
Relating to orders for consignment fill up and consignment issue.
The delivery notes are needed to be printed for 'Consignment fill up order' type, BUT not for Consignment issue - as this is confusing some of the warehouse staff at month end.
All have the same delivery type, the only difference i can see is the item category types are different
Is there a way i can use the sales order type, with customer number as an access sequence for the Output type ?
- Or the Item category type ?
Is it possible to add sales order type or Item category into the FIELD CATALOG :- output for deliveries
Your help would be much appreciated
Cheers
Tony

Hi,
I can suggest you something, but do remember that I've never done such kind of thing till date.
>> Copy LF and create new delivery type
>> Assign this to your consignment doc. types
>> Kindly remove the Header output determination procedure assigned to this new delivery type
>> Then assign output det. procedure at Item level {according to Item category}
>> Then check if will cater to your requirment or not.
Please keep one thing in mind that I am giving you a proposal by thinking in one logical way and I can't confirm the practicality of the proposal.
Hrishi

Similar Messages

Automatic Batch Determination is not happening for New Sales Order Type

Dear Experts,
I have created a new sales order type ZBPY - For Free Sales, but automatic batch detrmination and batch pick up is not happening for new sales order type, but it is activated for all the other sales order types in Production Server, can any body let me know the steps how to map this new order type to batch management and let it behave like other order types.
Thanks in Advance.
Saravanan(EKS).

Hi Saravanan,
Kindly check the following steps for automatic batch determination.
1. First check the material is maintained with batch in the warehouse management.
2. Maintain new entry for search procedure for batch determination with the new created doc type.
3. Maintain new entry for automatic batch determination for sales order or automatic batch determination for delivery ( This depends on the business process of our client, whether they want to determine the batch with sales order or at the delivery level. check this and make new entry)
4. Create Batch using T.code MSC1N with proper date of manuf. and SLED.
5. Create Batch Search Strategy using T.code VCH1 with proper strategy type.
6. Maintain stock with active batch. check this with t.code LS26 or LS24.
regards
Ravishankar M

For Z Po order type - Item category field is greyed out.

Hi MM Experts,
I am an ABAper working on PO creation with respect to PR( PR with account assignment N) for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
Thanks in Advance
Pravee.

Hi All,
Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
Thanks
Pravee.

TANN item category item not picking for return sales order

Hi all,
I have a question regarding TANN item category. This TANN item category item is not picking for return sales order type. As far as i know RENN is the free goods for return sales order. Can you please clarify the above question further

Hi
If you are making return order by copying sales order then please see this procedure also.
Try to check in the copy control also.
Go to the following path IMG u2013 Sales and Distribution u2013 Sales u2013 Maintain Copy control for sales documents. (Tcode VTAA)
Select copying control : sales document to sales document.
Search your return delivery order from the reference sales document type.
Then select the item from the left side Colum.
Go and find out TANN item category and click on detail.
Check out Item Cat proposal. If it is empty then type your RENN condition type over here.
Now try to create the return sales order it might work.
Raj.

Sale order with item category TAN not getting displayed in md04

Hi,
We have a sale order with item category TAN, Schedule line category CP, MRP type ND and availability check as 07. This is not getting reflected in md04. But item category TAB gets displayed under the PR number.
Please let me know what checks to be made or changes to be done for the sale order with item category TAN to get displayed in md04 screen
Thanks & Regards

Hi all,
I changed the MRP type to PD, and from the next sale order, line item onwards, it was getting displayed in md04 screen. The already created one anyway dint get reflected. So I had to delete the line item and create a new one.
Thanks all for the help
Regards,
Jegashree

Order type & Item Category

Dear SAPers,
i used to work with the standard Order Type and Item Category. Now i decided to copy and change them. By raising the sales order (with my order type 9OR) i don't get the item category 9TAN that i created. How can i solve that.
Thanks

Hi
Go to (VOV4) and do the Item category Determination for your Sales Document Type, Item Category Group & Default Item category. if this assignment is done, then once u raise the sales order then u can find your item category.
Hope this will help.
Thanks & Regards
Aravind

Delivery note with reference to sales order - 0 quantity items

Hi all,
our system allows items with quantity 0 to be created in delivery notes with reference to sales orders.
This happens when some items in a sales order are out of stock while others are availiable. The unavailable items are included in the delivery note, but have quantity 0.
The requirement is to eliminate this behavior and to create delivery notes with availiable items only.
I would be grateful for any advice how to realise this.
Best regards, Andreas

Make the necessary configuration i.e. Check quantity 0 field value should be maintained as B in the respective delivery item category using transaction 0VLP.
Regards,
GSL.

SHIP TO PARTY NOT DEFINED FOR CERTAIN SALES AREA

Hi ...
I am creating a specific type of sales order in va01 by reffering a billing document . But soon after entering billing document no it is showing " SHIP TO PARTY NOT DEFINED FOR CERTAIN SALES AREA..." The sales area --- which it's showing in error it is quite different ....it's not that one what we used for it in that ref billing document .
Note : We are maintaining ship to party , sold to party ..... in CRM only
Their also I checked it is assigned properly .Relatioship with sold to party is also OK .
But in R/3 I have checked that ship party is created in VD01 Where as sold to party is created in XD01 .
PLS ADVC

Dear Sundar,
Please check in these areas
1.Check the sales area which you are trying to create sales order and copying invoice sales area is same or not.
2.Why you haven't created ship to party in XD01 transaction.
You go to XD01 transaction exetend the customer master then try.
3.Check the customer master(Ship to party) is available under which sales area.
I hope it will help you,
Regards,
Murali.

Creating a delivery note based on a sales order in SBO2005

Hi
I am using the diapi to create a delivery note based on a sales order. Everything works well apart from I have 3 user defined fields on the sales order lines, 2 numeric and one which is a combo box.
The 2 numeric values as copied across ok but the combo is not.
I don't know what the delivery number is as I guess SAP assigns that after I save the delivery note.
Can anyone help me with this please ?
Regards Andy

Hi Paul & Gilbert,
As you assumed, the docentry is created at the moment when you are saving the document.
The docentry for the last created document can be retrieved from the Company object. There are two alternative methods for this: GetNewObjectCode and GetNewObjectKey. Please see the DI API reference for more details. These are the only reliable way to get the last created docentry. A query might work nicely in 95% of the cases, but in a multi-user environment it will sooner or later produce incorrect results.
Henry

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

What's the name of FM for getting Sales Order Header / Item Status info

Hello All:
Do you know what's the name of Function Module for getting Sales Order Header / Item Status Overview ? Any sample code will be very much appreciated.
Basically, I am trying to create a Webpage where user can enter the Sales Order document number and will return the Sales Order: Status Overview.
Thanks,
Dipankar Biswas

Thanks everybody ! Appreciate for your prompt response. I was also looking for some sample code, and I did find some on. And here is one. I still have to try the code, but here is for all your reference:
*& Report ZBAPI_SALESORDER_GETSTATUS *
*& Read and Display the Sales Order Items and Status of the Order *
REPORT zbapi_salesorder_getstatus NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 33(3).
TABLES: vbap. "Sales Document Item Data.
DATA: wa_bapireturn TYPE bapireturn,
wa_bapisdstat TYPE bapisdstat,
it_bapisdstat LIKE STANDARD TABLE OF wa_bapisdstat.
TYPES: BEGIN OF ty_mat_name,
matnr TYPE makt-matnr,
maktx TYPE makt-maktx,
END OF ty_mat_name.
DATA: wa_mat_name TYPE ty_mat_name,
it_mat_name LIKE TABLE OF wa_mat_name WITH KEY matnr .
PARAMETERS: p_vbeln LIKE vbap-vbeln DEFAULT 5573.
START-OF-SELECTION.
SELECT matnr maktx FROM makt INTO TABLE it_mat_name.
CALL FUNCTION 'BAPI_SALESORDER_GETSTATUS'
EXPORTING
salesdocument = p_vbeln
IMPORTING
return = wa_bapireturn
TABLES
statusinfo = it_bapisdstat.
IF wa_bapireturn IS INITIAL. " Successful Execution.
WRITE: / 'Document No: ' COLOR 1, 20 'PO Number : ', 40 'Status' , 50 'Delv.Stat',60 'Item No', 80 'Material', 90 'Material Description', 130 'Net Price' COLOR 2.
ULINE.
LOOP AT it_bapisdstat INTO wa_bapisdstat.
WRITE: / wa_bapisdstat-doc_number. " Sales Document Number.
READ TABLE it_mat_name INTO wa_mat_name WITH KEY matnr = wa_bapisdstat-material.
WRITE: /20 wa_bapisdstat-purch_no, " Customer Purchase Order Number
40 wa_bapisdstat-prc_stat_h, " Processing Status
50 wa_bapisdstat-dlv_stat_h, " Delivery Status
60 wa_bapisdstat-itm_number, " Item Number
80 wa_bapisdstat-material, " Material
90 wa_mat_name-maktx, " Material Description
130(10) wa_bapisdstat-net_price. " Net Price
CLEAR wa_bapisdstat.
ENDLOOP.
REFRESH it_bapisdstat[].
ELSE.
WRITE: wa_bapireturn-message.
ENDIF.

How to Find Out The Production Order Number For The Sales Order Line Items

Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman

Select aentries from table Z-Table for all sales order line items

Hi friends,
can anyone please explain me about the "Select entries from table Z-Table for all sales order line items".
Thanks.

Moderator message - Welcome to SCN.
But
Moderator message - Please search before asking. Press F1 on SELECT and look at the FOR ALL ENTRIES addition. - post locked
Rob

Returnable Packing - Sales order maintainance / Item Category determination

Gurus,
I have question about returnable packing regarding sales order entry and item category determination
1) Sales order : Should we do entry of returnable packing in Sales Order as a regular item
Example : The material M1 - 100unites needs returnable packing materials PK1 5 unites.
Therefore in sales order it should be entered as below
M1 - 100unites
PK1 - 5unites
Please commnet.
2) Item category determination should be done at sales document level
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (???) = TAL
Please commnet.
Regards,
Ashish

Hi
Yes Ashish you need to enter the returnable as a separate item in the sales order
For qn no 2 the item categories of higher levelitems can be TAN and TAX
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (blank) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAN) =TAL
Sales document type + Item category group (LEIH) + Usage (PACK) + Higher lever item Cat (TAX)=TAL
Note returnable packing items are creates as a separate materials with material type as LEIH and item category group as LEIH
How to bring back the returnable packaging stocks to your plant
Creating a Returnable Packaging Pick-Up
Create a sales order using order type LA /AT.
Enter the required data on the customer, the returnable packaging, and the plant to which the materials are to be returned.
Enter all other relevant data and save the order.
Create a returns delivery for the sales order when the materials reach your company.
The system proposes delivery type LR automatically. The transaction is completed by the goods receipt posting which initiates a transfer posting from the customer's special stock to your plant stock.
Regards
Raja

Credit Management for different Sales Order Types

Hello All,
The problem is related to Credit Management for Sales Order which is explained below with an example -
We have separate Sales Order Types for New Launches (ZNLS) & Normal Depot Sales (ZDPS) but both the Order Types are assigned with same pricing procedure and respective orders will be raised against the same party code.Now automatic credit check is only active for order type ZDPS where the credit limit had been set to Rs.1000. Now Rs,.500 had already been raised using order type ZDPS, then another sales order of Rs. 500 is raised using order type ZNLS.But when a sale order of Rs. 550 is raised using order type ZDPS the sales order is getting blocked, because the system had taken into consideration & added up the Rs. 500 value of ZNLS with previous value of Rs. 500 against order type ZDPS as a result of automatic credit check though it is not active for order type ZNLS.Point to be noted that Credit exposure is also not active for Order Type ZNLS.
How is this taken into consideration & what are the steps need to be configured so that the credit limit check will not get automatically activated for order type ZNLS and only remain active for order type ZDPS despite they are assigned to same pricing procedure and used for invoicing same party code?
Please suggest.
Thanks & Regards
Priyanka Mitra

Hi Mitra,
The issue occurs because of the fact that credit check and the
update of the credit values are separate processes which are also
controlled separately by the respective customizing:
1. credit check is controlled by transactions OVAK and OVA8.
According to the attachment, you have already refered to note 18613 to
check the customizing settings.
2. update of the credit values is controlled by VOV7 or OVA7: "credit
acttive" flag. The 'Credit active' setting only affects the credit
update of the SD credit values (open orders, open delivery and open
billing documents). This flag has no control on the credit check. So
if for an order type, there is no credit check in OVAK and OVA8 but
the "credit active" flag is set for the item category, the order will
update the credit values even if no credit check is performed for the
order.
If the flag "credit active" is not set, the system will not update the
open credit values. On the other hand, the system ALWAYS updates the FI
credit value 'Open receivable' when the billing document is transferred
to Accounting. So, although you deactivated the "Credit active" flag in
in OVA7 or VOV7, such an item will increase the 'Open receivables' and
thus the credit limit used when the corresponding billing document is
posted to Accounting.
If you would like the value from sales order type ZNLS is excluded from credit update, you could consider set the "Credit Active" field as blank in VOV7 for the item category used for ZNLS.
Best regards,
Smile

Suppresing Delivery note prints for certain sales order types/item category

Similar Messages

Maybe you are looking for