Custom attributes on endpoints objects in ISE 1.3 ??

Hi,
I would like to create custom attributes on an endpoint object - just as it is possible to do on user object.
How do I do that ?
Can I use the REST API for that - or is that not supported ?
Best regards
Tue

From what I was able to gather, the two primary reasons were:
1. Customers complaining that it was too complex to get even a basic customized portal going
2. TAC was getting way too many case related to troubleshooting custom HTML portal issues
Not too long ago I completed a deployment where the customer provided the custom HTML portal which was causing the BYOD flow to break (randomly). As soon as we uploaded a portal that was created in Cisco Portal Builder, the issues went away.

Similar Messages

Extracting custom attributes for individual objects

CRM service maintain those custom attributes and set types. By checking the 'BW relevant', it generates all the custom data sources for BW. The data sources are in $tmp, but can be viewd in RSO2.
Those custom attributes can be added to 0crmp_prod and updated via flexible update from those generated datasource. My concern is that it creates a lot of maintenance depending on the number of set types maintained in CRM. Currently there are about 50 set types being maintained in CRM, which means additional 50 transfer rules for 0crm_prod.
My question is whether there is more efficient way to handle this situation.
Thanks for any suggestion.
Jennifer

It sounds as if your custom attributes may not have been created properly which is leading to your current problem. When creating a new attribute, one of the final steps is adding it to a specific 'Class'. This is where you choose
Computer or User or any other specific need you have. It sounds very much like this is the piece that has been missed.
To fix it you'll first need to clean out the User specific pieces that have gotten into the system. Easier said than done, I understand, but it will be crucial going forward. Once cleaned, add the attributes to the Computer class one at a time
using the Active Directory Schema admin tool. You will need to be a member of the Enterprise Admins to add yourself into the Schema Admins and please remember to remove yourself after you are done (Best Practice).
Refer to this for additional info:
http://social.technet.microsoft.com/wiki/contents/articles/20319.how-to-create-a-custom-attribute-in-active-directory.aspx
and:
http://blogs.technet.com/b/isingh/archive/2007/02/18/adding-custom-attributes-in-active-directory.aspx
Hope that helps
Gary
Gary G. Gray
MCP, MCTS, MCITP, MCT Alumni
Please remember to mark the replies as answers if they are helpful.
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

11g GC DBAT Trusted Source Reconciliation with custom attributes fails

Hi All,
We are working on OIM 11g and we are using the GTC Database Tables connector to reconcile from an HR application that exposes the data in some views. When we add a custom attribute in User object (HR_ROLE_CODE) and map it in the connector the reconciliation fails with the following error:
intUserKey_in = 1
intBatchKey_in = 80
strTargetTableName_in = RA_MERGERDEVDBEMPGTC46
strRequiredAttributesList_in = RECON_USR_LOGIN,RECON_LASTNAME,RECON_STATUS
strValidateAttributesList_in = RECON_USR_LOGIN,RECON_USR_EMAIL,RECON_ACT_KEY,RECON_USR_TYPE,RECON_USR_EMP_TYPE,RECON_USR_START_DATE,RECON_USR_END_DATE
strOIMVldtAttributeColList_in = USR_LOGIN,USR_EMAIL,ACT_KEY,USR_TYPE,USR_EMP_TYPE,USR_START_DATE,USR_END_DATE
strMatchingRule_in = (((USR.USR_LOGIN=RA_MERGERDEVDBEMPGTC46.RECON_USR_LOGIN)))
strNoMatchFoundRule_in = Create User
strUserMatchedRule_in = Establish Link
strUsersMatchedRule_in = None
intEventAssignUsrGrpKey_in = 0
strmappedAttributesList_in = RECON_USR_LOGIN,RECON_ROLECODE,RECON_FATHERSNAME,RECON_LASTNAME,RECON_ACT_KEY,RECON_FIRSTNAME,RECON_USR_EMP_TYPE,RECON_USR_TYPE,RECON_USR_PASSWORD
stroimAttributeTableColList_in = USR_LOGIN,HR_ROLE_CODE,USR_MIDDLE_NAME,USR_LAST_NAME,ACT_KEY,USR_FIRST_NAME,USR_EMP_TYPE,USR_TYPE,USR_PASSWORD
strReconciliationType_in = User
strReconMLSTableName_in = RA_MLS_MERGERDEVDBEMPGTC46
strReconMLSColNames_in =
strOimMLSColNames_in =
strDefaultLocale_in = el
strAllLocates_in = el
intReturnCode_out = null
strErrMsg_out = null
SEVERE: Γενικό σφάλμα/πληροφορίες: {0}
oracle.iam.platform.utils.SuperRuntimeException: -9: Attribute field (HR_ROLE_CODE) does not exist in table USR.
     at oracle.iam.reconciliation.dao.ReconActionDao.executeBulkUserMatchCRUD(ReconActionDao.java:697)
     at oracle.iam.reconciliation.impl.UserHandler.executeBulkCUD(UserHandler.java:568)
     at oracle.iam.reconciliation.impl.BaseEntityTypeHandler.process(BaseEntityTypeHandler.java:34)
     at oracle.iam.reconciliation.impl.ActionEngine.processBatch(ActionEngine.java:129)
     at oracle.iam.reconciliation.impl.ActionEngine.execute(ActionEngine.java:90)
     at oracle.iam.reconciliation.impl.ActionTask.execute(ActionTask.java:73)
     at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
     at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
     at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy488.onMessage(Unknown Source)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:328)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3822)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The attribute exists in USR table with name: USR_UDF_HR_ROLE_CODE but the connector maps it as HR_ROLE_CODE (line: stroimAttributeTableColList_in = ....)
Can anyone help on this?
Thanks in advance,
Kostas

Thanks for the answer Rajiv,
I tried to run the utility to download/upload a custom resource bundle but after the parameters that I provide the utility does nothing. It looks like it cannot find the specified path/file lathough i tried both windows and unix style.
It does not display ay message of success or failure, also I do not know how can I verify that the bundle has been upload successfully.

How to create custom attributes & object classes through ldif files in OID

Hi,
I have to create 4 attributes and one object class(custom) in OID. I want to creae these attributes and object class through LDIF file.
I tried creating an attribute through this command
ldapadd -p 389 -h localhost -D cn=orcladmin -w password -f D:/newattr.ldif
this ldif file contains inf. for creating a new attributes:
dn: cn=subschemasubentry
changetype: add
add: attributetypes
attributetypes: ( 1.2.3.4.5.6.10 NAME "xsUserType_new" DESC "User Type Definition" EQUALITY caseIgnoreMatch
SYNTAX "1.3.6.1.4.1.1466.115.121.1.15" )
I am getting error: Object class violation
Failed to find add in mandatory or optional attribute list.
Please help to find where I am going wrong...
Thanks.

Hi Ajay,
Thank you for the help. Now i am able to create both attributes and object classes in OID through Ldif files.
I was getting constraint violation error because (I think) I was not giving proper naming convection for attributes and object classes. For OID, there are certain Ldap naming conventions. They are as follows:
# X below is the enterprise number assigned by IANA
1.3.6.1.4.1.X.1 - assign to SNMP objects
1.3.6.1.4.1.X.2 - assign to LDAP objects
1.3.6.1.4.1.X.2.1 - assign to LDAP syntaxes
1.3.6.1.4.1.X.2.2 - assign to LDAP matchingrules
1.3.6.1.4.1.X.2.3 - assign to LDAP attributes
1.3.6.1.4.1.X.2.4 - assign to LDAP objectclasses
1.3.6.1.4.1.X.2.5 - assign to LDAP supported features
1.3.6.1.4.1.X.2.9 - assign to LDAP protocol mechanisms
1.3.6.1.4.1.X.2.10 - assign to LDAP controls
1.3.6.1.4.1.X.2.11 - assign to LDAP extended operations
By using these conventions for attributes and object class, I did got any error and they were created in OID.
Thanks a zillion.
Kalpana.

How can i add custom attributes to a new Class Object using the API ?

Hello everyone,
Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code :
// doc is an instance of Document
ClassObject co = doc.getClassObject();
ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
cod.setSuperclass(co);
cod.setSuperclassName(co.getName());
cod.setName("MYDocument");
ClassObject c = (ClassObject)ifsSession.createSchemaObject(cod);
Everything seems to be OK since i can see the new class when i use ifsmgr. But my question is : how can i add custom attributes to this new class ? Here is what i tried :
AttributeDefinition value = new AttributeDefinition(ifsSession);
value.setAttribute("FOO", AttributeValue.newAttributeValue("bar"));
c.addAttribute(value);
But i got the following error message :
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
java.sql.SQLException: ORA-01400: impossible d'insirer NULL dans ("IFSSYS"."ODM_ATTRIBUTE"."DATATYPE")
oracle.ifs.server.S_LibraryObjectData oracle.ifs.beans.LibrarySession.DMNewSchemaObject(oracle.ifs.server.S_LibraryObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.NewSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.createSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
void fr.sword.ifs.GestionDocument.IFSDocument.createDocument(java.lang.String)
void fr.sword.ifs.GestionDocument.IFSDocument.main(java.lang.String[])
So, what am i doing wrong ?
More generally, are we restricted in the types of the attributes ? (for example, would it be possible to add an attribute that would be an inputStream ? Or an object that i have already created ?).
Any help would be appreciated. Thanks in advance.
Guillaume
PS : i'm using Oracle iFS 1.1.9 on NT4 SP6 and Oracle 8.1.7
null

Hi Guillaume,
you're welcome. Don't know exactly, but assume that ATTRIBUTEDATATYPE_UNKNOWN
is used to check for erronous cases only
and it shouldn't be used otherwise.
Creating your own objects could be simply done via
ClassObject ifsClassObject;
DocumentDefinition ifsDocDef = new DocumentDefinition(ifsSession);
// get class object for my very own document
ifsClassObject = ClassObject.getClassObjectFromLabel(ifsSession, "MYDOCUMENT");
// set the class for the document i'd like to create
ifsDocDef.setClassObject(ifsClassObject);
// set attributes and content for the document...
ifsDocDef.setAttribute("MYFOO_ATTRIBUTE",....);
ifsDocDef.setContent("This is the content of my document");
// create the document...
PublicObject doc = ifsSession.createPublicObject(ifsDocDef);
null

Custom attributes added to user objects not visible in OWA address book

Hi,
I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
Thanks!

Hi Abu,
Please see following link:
Customize Details Templates
http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
My understanding is this setting only visible in Outlook.
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Edit OID Object Class to Add custom attributes

Has anyone edited an existing object class( in my case orclADUser ) and added custom attributes to it?
If so
1) what is the best way to add it (oidadmin Schema management ? )
2) what is the impact on such custom attributes ?

Yes and no.
I've done this but I created my own classes in the oidadmin. Then I populated them.
My application searched through these attributes (in a separate part of the OID). One attribute pointed to the DN of the user.
Doing it in this way will ensure that standard software and updates will not break your setup.
cu
Andreas

Error while creating Attribute In BPM Object

Hi,
I am getting error while creating attributes in BPM Object.I am not able to open BPm object. while opening I am getting Below error.
Please suggest.
java.lang.StringIndexOutOfBoundsException: String index out of range: 28
     at java.lang.String.charAt(Unknown Source)
     at fuego.type.TypeFactory.createFromName(TypeFactory.java:482)
     at fuego.type.TypeFactory.forNameLazy(TypeFactory.java:263)
     at fuego.lang.CollectionTypeDescription.getIndexTypeRef(CollectionTypeDescription.java:146)
     at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:355)
     at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
     at fuego.compiler.type.TypeRenderer.renderArrayType(TypeRenderer.java:344)
     at fuego.compiler.type.TypeRenderer.renderType(TypeRenderer.java:261)
     at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:106)
     at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:94)
     at fuego.compiler.type.TypeRenderer.render(TypeRenderer.java:78)
     at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:612)
     at fuego.designer.XObjectComponentStructurePanel$CellTypeRenderer.getText(XObjectComponentStructurePanel.java:605)
     at fuego.ui.peer.swt.SwtTable$SwtTableModel.getColumnText(SwtTable.java:956)
     at org.eclipse.jface.viewers.TableColumnViewerLabelProvider.update(TableColumnViewerLabelProvider.java:70)
     at org.eclipse.jface.viewers.ViewerColumn.refresh(ViewerColumn.java:135)
     at org.eclipse.jface.viewers.AbstractTableViewer.doUpdateItem(AbstractTableViewer.java:386)
     at org.eclipse.jface.viewers.StructuredViewer$UpdateItemSafeRunnable.run(StructuredViewer.java:466)
     at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
     at org.eclipse.core.runtime.Platform.run(Platform.java:857)
     at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:46)
     at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:199)
     at org.eclipse.jface.viewers.StructuredViewer.updateItem(StructuredViewer.java:2026)
     at org.eclipse.jface.viewers.AbstractTableViewer.internalRefreshAll(AbstractTableViewer.java:695)
     at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:633)
     at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620)
     at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1433)
     at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1368)
     at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1330)
     at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1431)
     at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:536)
     at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1390)
     at fuego.ui.peer.swt.SwtViewer.repaint(SwtViewer.java:59)
     at fuego.ui.peer.swt.SwtColumn.setLabelProvider(SwtColumn.java:89)
     at fuego.ui.Column.setLabelProvider(Column.java:82)
     at fuego.designer.XObjectComponentStructurePanel.buildUI(XObjectComponentStructurePanel.java:299)
     at fuego.designer.AbstractEditor.build(AbstractEditor.java:542)
     at fuego.designer.AbstractEditor.init(AbstractEditor.java:133)
     at fuego.designer.XObjectComponentStructurePanel.<init>(XObjectComponentStructurePanel.java:126)
     at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.createStructurePage(BPMObjectMultipartEditor.java:581)
     at fuego.eclipse.studio.multipageeditor.BPMObjectMultipartEditor.addDefaultPages(BPMObjectMultipartEditor.java:464)
     at fuego.eclipse.studio.multipageeditor.ExtendedMultiPageEditorPart.createPages(ExtendedMultiPageEditorPart.java:399)
     at fuego.eclipse.studio.multipageeditor.eclipse.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:253)
     at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
     at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:426)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:592)
     at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:299)
     at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:179)
     at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
     at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
     at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:400)
     at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)
     at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1209)
     at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1604)
     at org.eclipse.ui.internal.PartStack.add(PartStack.java:499)
     at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:103)
     at org.eclipse.ui.internal.PartStack.add(PartStack.java:485)
     at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:112)
     at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:63)
     at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:217)
     at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:207)
     at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:774)
     at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:673)
     at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:634)
     at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2737)
     at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2651)
     at org.eclipse.ui.internal.WorkbenchPage.access$13(WorkbenchPage.java:2643)
     at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2595)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2590)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2574)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2557)
     at fuego.eclipse.ui.DefaultEditor.open(DefaultEditor.java:65)
     at fuego.eclipse.studio.EclipseWorkbench.createEditorFromResource(EclipseWorkbench.java:529)
     at fuego.eclipse.studio.EclipseWorkbench.createEditor(EclipseWorkbench.java:297)
     at fuego.designer.action.OpenCatalogNodeAction.open(OpenCatalogNodeAction.java:91)
     at fuego.designer.action.OpenCatalogNodeAction.run(OpenCatalogNodeAction.java:55)
     at fuego.eclipse.ui.EclipseAction.run(EclipseAction.java:180)
     at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
     at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
     at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
     at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1173)

When you say you're having trouble "opening" the BPM Object, is it possible you instead mean you're having trouble expanding the BPM Object?
Just a guess, but if you're having trouble expanding the BPM Object I'd suspect that the object's xcdl contents might be corrupted. You might want to consider exporting and saving a backup of the project and then try deleting the object from the Project Navigator. Rebuild the BPM Object once you've deleted it.
Dan

Problem with setting custom attribute and it being searchable

I'm having an issue with setting a custom attribute and having it be searchable using Portal 10.1.4. The situation that we have is that we initially added a bunch of files to Oracle Portal using webdrive. Later on, we decided that we needed another custom attribute called "Pinned Item" that will be used for searching (boolean value) and gave it a default value of false. The attribute was then added to the "File" item type in the "Shared Objects" group.
It appears that since this attribute wasn't initially available on the file object, we couldn't search on it so we decided to set it programatically. First, I tried using wwsbr.set_attribute but it errored out seemingly because the value wasn't set in the first place. If I set a value first by using the web front end, I could then use the set_attribute procedure.
So, I moved on to using wwsbr_api.modify_item and it appears to set it (although everything is being set to false until I changed it to "text" instead of "boolean" which is OK because that's what I wanted anyway... see metalink bug 390618.1). I'm using the method outlined in metalink doc 413079.1. When I do set it to a "1", and edit the item the check box is checked indicating that it is set correctly. And if I just click "OK" to save the attributes after I open it everything works like it should.
However, the advanced search (and custom search portlet) and the search APIs are not picking it up. I'm not sure if I'm hitting Metalink bug ID 5592472 or not as that's using the "set_attribute" procedure instead of the modify_item procedure. And their "workaround" of setting the attribute in the UI isn't really feasible for a couple thousand files.
So far I've tried the following things to get it working:
1. I am calling wwpro_api_invalidation.execute_cache_invalidation
2. I have executed wwv_context.sync
3. I cleared the page group cache
4. I invalidated all of the web cache
Does anyone else have any other suggestions?

I'm having an issue with setting a custom attribute and having it be searchable using Portal 10.1.4. The situation that we have is that we initially added a bunch of files to Oracle Portal using webdrive. Later on, we decided that we needed another custom attribute called "Pinned Item" that will be used for searching (boolean value) and gave it a default value of false. The attribute was then added to the "File" item type in the "Shared Objects" group.
It appears that since this attribute wasn't initially available on the file object, we couldn't search on it so we decided to set it programatically. First, I tried using wwsbr.set_attribute but it errored out seemingly because the value wasn't set in the first place. If I set a value first by using the web front end, I could then use the set_attribute procedure.
So, I moved on to using wwsbr_api.modify_item and it appears to set it (although everything is being set to false until I changed it to "text" instead of "boolean" which is OK because that's what I wanted anyway... see metalink bug 390618.1). I'm using the method outlined in metalink doc 413079.1. When I do set it to a "1", and edit the item the check box is checked indicating that it is set correctly. And if I just click "OK" to save the attributes after I open it everything works like it should.
However, the advanced search (and custom search portlet) and the search APIs are not picking it up. I'm not sure if I'm hitting Metalink bug ID 5592472 or not as that's using the "set_attribute" procedure instead of the modify_item procedure. And their "workaround" of setting the attribute in the UI isn't really feasible for a couple thousand files.
So far I've tried the following things to get it working:
1. I am calling wwpro_api_invalidation.execute_cache_invalidation
2. I have executed wwv_context.sync
3. I cleared the page group cache
4. I invalidated all of the web cache
Does anyone else have any other suggestions?

How to add a custom attributes in Oracle HTML Quotes page?

Hi,
Could someone advice on the best way to add a custom attribute in Oracle HTML Sales Quoting page.
As this page is not an OA page, we are not able to use the concept of View Objects using AK Developer.
Thanks,
Arathi

I have a requirement from our end users that all of them requires a shortcut button in toolbar for submitting a request instead of going the normal way in order to submit a single request.
please can any one help me out in solving this query.Any reason you want to use a shortcut rather than using (Requests > Submit) window?
You can use "FND_REQUEST.SUBMIT_REQUEST" API -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_REQUEST.SUBMIT_REQUEST&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
How To Submit A Concurrent Request Set Using Fnd_Request.Submit_Request [ID 382791.1]
How To Set ORG_ID When Submitting A Concurrent Request Using FND_REQUEST.SUBMIT_REQUEST in Release 12 [ID 1383266.1]
Thanks,
Hussein

Custom Attribute not available in Available Fields section of Configuration

Hi Experts,
My requirement is to add a custom search field in contact search screen. For that i tried various options
Option1
Added a model attribute in component/view BP_CONT SEARCH/Search. The attribute got successfully added. But when i opened the Configuration tab, i could not see the attribute in the available fields.
Option 2
In the view CRMVC_SDESIGN, i created a new entry for my attribute in object type: BP_CONTACT and design object . But doing so, i got an error and was not able to add my attribute
Option3
Since the View context node 'Search' is bound to the Component Controller Context node 'Search'. I created my custom attribute in compoennt controller also. But this also did not help.
Option 4
I deleted the enhancement of the view and created a new enhancement. I created a value node in Search context node. But still the attribute is not available in the Availble Fields in the Configuration of component/view BP_CONT_SEARCH/SEARCH.
Kindly provide your valuable suggestions to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 6, 2012 7:28 AM

Hi Radhika,
You need to enhance the search query structure as well in order to get the field in the configuration.
You can find the BOL structure for the corresponding context node bol model.
In your case, the BOL model is the search object 'BuilContactAdvancedSearch'.
The corresponding structure can be found at the BOL Model Browser, under Dynamic Query Objects
for the search object 'BuilContactAdvancedSearch'. The corresponding structure 'CRMT_BUPA_IL_CONP_SEARCH'
has to be enhanced with the new custom attribute. Only then, this field would be available in the configuration
when the following htm code gets executed when you open the configuration tab.
<thtmlb:advancedSearch id                = "advs0"
                                 fieldMetadata     = "<%= controller->GET_DQUERY_DEFINITIONS( ) %>"
                                 header            = "<%= SEARCH->get_param_struct_name( ) %>"
                                 fieldNames        = "<%= controller->GET_POSSIBLE_FIELDS( ) %>"
                                 values            = "//SEARCH/PARAMETERS"
                                 maxHits           = "//SEARCH/MAX_HITS"
                                 ajaxDeltaHandling = "false"
                                 onEnter           = "search" />
Here you can see that, it reads the parameter structure using the method SEARCH->get_param_struct_name( ) of
the context node.This is used for configuration as well.
Also if you have an F4 help for your custom attribute, you have to add it in the GET_DQUERY_DEFINITIONS( ) of the
view controller. These additional information will help you to understand better.
Regards
Leon
[SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

Need to create new users in Office 365 with custom attributes from a csv file

I am exporting users from an active directory environment and then deleting them from AD. They are Alumni and will no longer be in AD.
I have a csv file with the following fields that I need to use to create new Alumni email boxes in Office 365 for. I need the CustomAttributes because my Dynamic Distribution Groups use them. I am fairly new to PowerShell and have been unable to get this
to work. I suspect I may have to split it into two parts, but am not sure how to proceed. Any assistance would be appreciated. I was directed here from the Office 365 community.
Import-Csv -Path c:\CSVfiles\CreateAlumni.csv | ForEach-Object {
   New-MsolUser -FirstName $_.FirstName -LastName $_.LastName
   -UserPrincipalName $_.UserPrincipalName
   -DisplayName "$($_.FirstName) $($_.LastName)"
   -Password $_.Password
   -CustomAttribute1 $_.CustomAttribute1
   -CustomAttribute3 $_.CustomAttribute3
   -CustomAttribute10 $_.CustomAttribute10
   -CustomAttribute11 $_.CustomAttribute11
   -CustomAttribute12 $_.CustomAttribute12
   -LicenseAssignment 'domaincom:EXCHANGESTANDARD_ALUMNI'
   -UsageLocation US

Ok, it wasn't stopping after 2 iterations. What I was seeing was 2 failures. The first was the Get-Mailbox command and the second was when it tried to assign attributes. For some reason it is not looping when it fails. It just goes on and tries to assign
the Custom Attributes. I added writes in to tell me what was happening.
### Check if mailbox is provisioned yet
Write-Host "Checking if mailbox is provisioned yet..." -foregroundcolor yellow
$found = $false
$count = 0
Do {
try {
Get-Mailbox -Identity $_.UserName -ErrorAction Stop
$found = $true
Write-Output 'Mailbox found. Details:'
Get-Mailbox -Identity $_.UserName
} catch {
Write-Output 'Sleeping'
$count++
Start-Sleep -Seconds 5
If ($count -ge 12) {
Write-Output 'Mailbox not found. Quitting.'
$found = $true
} Until ($found)
Write-Host "Adding Custom Attributes to User" -foregroundcolor yellow
Set-Mailbox -Identity $_.UserName -CustomAttribute1 $_.CustomAttribute1 -CustomAttribute3 $_.CustomAttribute3 -CustomAttribute10 $_.CustomAttribute10 -CustomAttribute11 $_.CustomAttribute11 -CustomAttribute12 $_.CustomAttribute12
Write-Output "User has been Provisioned in Office 365!" -foregroundcolor yellow
Checking if mailbox is provisioned yet...
The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
    + CategoryInfo
: NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=e1aabda1-01e4-4f68-984e-e20be0975242,TimeStamp=5/22/2014 4:23:59 AM] [FailureCategory=Cmdlet-ManagementObj
   ectNotFoundException] 2788FB48,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
    + PSComputerName        : pod51038psh.outlook.com
Mailbox found. Details:
The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
    + CategoryInfo
: NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=16a8a2bc-333a-455c-8504-e0b99c44c334,TimeStamp=5/22/2014 4:24:00 AM] [FailureCategory=Cmdlet-ManagementObj
   ectNotFoundException] 2788FB48,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
    + PSComputerName
: pod51038psh.outlook.com
Adding Custom Attributes to User
The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
    + CategoryInfo
: NotSpecified: (:) [Set-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=8319d220-b9dd-492f-8182-5083cf56e58b,TimeStamp=5/22/2014 4:24:00 AM] [FailureCategory=Cmdlet-ManagementObj
   ectNotFoundException] C7844A24,Microsoft.Exchange.Management.RecipientTasks.SetMailbox
    + PSComputerName
: pod51038psh.outlook.com
User has been Provisioned in Office 365!
Of course the user has been provisioned, but the CustomAttributes have not been assigned. :(

Using Rich Text Editor with a Custom Attribute

Hello All,
Can anyone please tell me as how can I use the Rich Text Editor with a Custom Attribute?
I want to create a custom attribute based on text datatype, but when entering the value for this attribute in a Custom Item, portal shows a normal textarea. I want that the user should see the Richt Text Editor.
Thanks for help.
Regards

Hi,
Can you tell me what steps you are using to produce this, and which Portal version you are using. When I tried it, I wasn't able to reproduce it. Here are my steps:
1) Created Custom Item Type, based on Text, under
Page Groups > Shared Objects > Item Types
2) Selected Three attributes (Description, Name, Publish Date). Note Text and Display Name were already selected
3) In Add Item Wizard, configured list to allow for my
custom item type selection.
4) Then I was able to see the Rich Text Editor when editin
my custom item type.
Regards,
J.

UWL refresh problem for ABAP BOR custom attributes

Hi all,
we are facing an issue with an UWL iView. We wanted to display custom attributes from an ABAP Business Object (ABAP_BOR).
The feature is working but when an end-user receives a new task in his UWL view, he needs to click on the refresh button in order to have all the custom attributes correctly displayed.
We have only the problem with custom attributes, for the columns containing standard workflow decision task attributes, the data are displayed directly without the need to push the refresh button.
We are on EP 7 SPS11 and the back-end is an ECC6 version.
We have followed the methodology described in the How to configure and customize the Universal Worklist pdf document:
ABAP BOR
<CustomAttributeSource id="ABAP_BOR"
objectIdHolder="externalObjectId"
objectType="FORMABSENC"
cacheValidity="final">
<Attribute name="COSTCENTER" type="string"
displayName="Cost Center"></Attribute>
<Attribute name="FIRSTDAYOFABSENCE" type="date"
displayName="First day of absence"></Attribute>
<Attribute name="LASTDAYOFABSENCE" type="date"
displayName="Last day of absence"></Attribute>
</CustomAttributeSource>
Do you have an idea where this problem come from and how it could be solved?
Thanks in advance and regards,
Sébastien BODSON

Hi Chintan,
This parameter has no impact on the problem we face. I found an exact description of our problem on SAP Help portal, in the UWL pages:
CustomAttributes, CustomAttributeSource and Attribute
Extract from SAP Help portal:
Every item type can have custom attributes defined, which can be filled from Business Object or Provider Data Containers like the Business Workflow Container or the Alert Container. These attribute sources are defined within the CustomAttributeSourcetag, which contains information on which attribute connector brings the custom attributes, how to identify these custom attributes in the provider system and how long the cache is valid.
Note that once an item arrives, these custom attributes are retrieved in additional calls to the backend. For performance reasons, in order to minimize responses times to the end user, this may happen while the item is displayed to the end user - causing such attributes to be empty initially and only to appear in subsequent requests.
The display names of the attributes for column headers and labels are defined in the display attributes of the default view of the item type.
Does anyone know a workaround in order to have directly the complete information displayed?
Sébastien BODSON

UWL custom attributes are not retreived

Hi all,
We are trying to add some custom attributes to our UWL. We are able to see the new columns but they remain null. It seems that the values are not retrieved from the backend.
We have tried defining custom attributes from workflow container, from BOR object and even UM but without success.
We have followed this thread http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379 and also other ones.
Here is my code for my custom attributes (under "TEST" comment):
<ItemType name="uwl.task.webflow.srm.TS00700018" connector="WebFlowConnector" defaultView="TS40008005_view" defaultAction="com.sap.pct.srm.core.action.launchWD.inv.detail" executionMode="default">
       <ItemTypeCriteria externalType="TS00700018" connector="WebFlowConnector"/>
                        <CustomAttributes>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="BOTYPE" displayName="Type of Business Object"/>
               <Attribute name="BOID" displayName="Business Object ID"/>
               <Attribute name="BOMODE" displayName="Business Object Mode"/>
          </CustomAttributeSource>
          
          <CustomAttributeSource id="ABAP_BOR" objectIdHolder="externalId" objectType="DECISION" cacheValidity="default">
                       <Attribute name="V_BE_REFOBJ" displayName="Description"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="UM" objectIdHolder="creatorId" objectType="user" cacheValidity="final">
                    <Attribute name="department" type="string" displayName="Department"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="W_HEADER_INV" displayName="Header"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="W_HEADER_INV" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="GUID" displayName="MiGuid"/>
          </CustomAttributeSource>
          
     </CustomAttributes>
     <Actions>
          <Action reference="com.sap.pct.srm.core.action.inv_approve"/>
          <Action reference="com.sap.pct.srm.core.action.inv_reject"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.inv.detail"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.print"/>
     </Actions>
</ItemType>
I've read in this thread [UWL: Time Delay of SAP and Custom Attributes: refresh necessary|UWL: Time Delay of SAP and Custom Attributes: refresh necessary] that UWL cache and the delta pull mechanism must be configured for the new attributes but I don't know how to check it.
Please, can anyone help me?
Thanks in advance,
Regards

Hi all,
I'm going to close this thread as it is duplicated.
Regards

Custom attributes on endpoints objects in ISE 1.3 ??

Similar Messages

Maybe you are looking for