UWL custom attributes are not retreived

Hi all,
We are trying to add some custom attributes to our UWL. We are able to see the new columns but they remain null. It seems that the values are not retrieved from the backend.
We have tried defining custom attributes from workflow container, from BOR object and even UM but without success.
We have followed this thread http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379 and also other ones.
Here is my code for my custom attributes (under "TEST" comment):
<ItemType name="uwl.task.webflow.srm.TS00700018" connector="WebFlowConnector" defaultView="TS40008005_view" defaultAction="com.sap.pct.srm.core.action.launchWD.inv.detail" executionMode="default">
       <ItemTypeCriteria externalType="TS00700018" connector="WebFlowConnector"/>
                        <CustomAttributes>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="BOTYPE" displayName="Type of Business Object"/>
               <Attribute name="BOID" displayName="Business Object ID"/>
               <Attribute name="BOMODE" displayName="Business Object Mode"/>
          </CustomAttributeSource>
          
          <CustomAttributeSource id="ABAP_BOR" objectIdHolder="externalId" objectType="DECISION" cacheValidity="default">
                       <Attribute name="V_BE_REFOBJ" displayName="Description"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="UM" objectIdHolder="creatorId" objectType="user" cacheValidity="final">
                    <Attribute name="department" type="string" displayName="Department"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="W_HEADER_INV" displayName="Header"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="W_HEADER_INV" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="GUID" displayName="MiGuid"/>
          </CustomAttributeSource>
          
     </CustomAttributes>
     <Actions>
          <Action reference="com.sap.pct.srm.core.action.inv_approve"/>
          <Action reference="com.sap.pct.srm.core.action.inv_reject"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.inv.detail"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.print"/>
     </Actions>
</ItemType>
I've read in this thread [UWL: Time Delay of SAP and Custom Attributes: refresh necessary|UWL: Time Delay of SAP and Custom Attributes: refresh necessary] that UWL cache and the delta pull mechanism must be configured for the new attributes but I don't know how to check it.
Please, can anyone help me?
Thanks in advance,
Regards

Hi all,
I'm going to close this thread as it is duplicated.
Regards

Similar Messages

Lync custom attribute are not shown in ADSIEdit

I have a AD running on Windows Server 2012 R2 with Lync extensions.
When I try to see the Lync custom attributes using ADSIEdit or using Active Directory Users and Computers they do not appear. However, when I use power shell Get-ADUser I do see all the attributes. The attributes are not empty.
e.g: Get-ADUser simons -property *
msRTCSIP-UserEnabled : True
msRTCSIP-UserPolicies : {0=1759513798}
msRTCSIP-UserRoutingGroupId : {10, 110, 186, 167...}
Any help will be highly appreciated.
Benny

Hi Benny,
Have you enabled the advanced features option?
Normal:
Enable Advanced Features:
Best regards,
Eric

Custom attributes are not showing up the data

Hi,
I added couple of custom fields in UWL.
I followed the following blog .
http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379
It is showing up the columns but there is no field values(data). It is with ECC system EHP4 and portal on EHP1.
I used the business objectZBUS2078(copied from BUS2078).
I tried to use the wizard too. Same problem. I tried to retrieve existing standards fields too (Description, priority kind) still the values are not getting populated. But standard fields are working. The same standard fields when I tried to use as custom they are showing blank.
Any Ideas. Am I missing any thing.
Regards
Mark

Hi DIAdemUser1,
This feature was indeed removed. R&D felt like it caused more confusion than benefit, and I agree. I do apologize to you and others who liked the feature that has now disappeared. When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity. I often miss that feature, but it's for the greater good.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

My Inbox Custom Attributes are toggling

Hello,
Please provide me help.
I am working on Documentum technology, I have customize my Webtop Inbox component.
Using Java,Jsp, XMl .
I have added three custom attributes in our Inbox.
It is working fine, but the issue is my custom attributes are toggling,means that sometime my custom attributes are displaying and sometime not.This happened when I am clicking on refresh button or clicking on inbox link.
please provide me help
Thanks
Shahnawaz

I look deep into my crystal ball, and ... let's see... the haze is starting to thin... now the image is forming.... it says:
"Post some code where you think the problem exists and ask specific questions about what you think may be the problem. Also post any error messages that occur and use code tags when you post any code."

SOLUTION MANAGER - VAR Scenario - Attributes are not transfered

Hi Solman Gurus
I have an issue regarding connection between Customer and VAR solman.
IThe connection is established following document How To Setup ServiceDesk 2 ServiceDesk Connection Nov 09.pdf.
The problem is in VAR Solman.
When message is transfered from Customer solman to VAR solman the following attributes are not transfered:
Sold-to party, Reported by, Support Team, Message Processor.
The Ibase is configured in both systems. When message is posted from satelite to Customer Solman all this attributes
are transfered. In the next steep, when message is transfered from Customer solman to VAR solman this attributes remain
empty in VAR Solman.
What confugration is missing in VAR Solman?
Thank you in advance
Marko

Hello Marko,
How did you define the value mapping? Automatically or manually?
Have you checked that Incoming and outgoing value mapping has been created in both systems?
Are you copying the values or taking an other action?
Could there be a rule that is setting the value to space?
I'd take a closer look at your value mapping and make sure incomming and outgoing have been defined properly on each system and make sure the rule is correct, and its not taking some unexpected action like set the value to blank when you wanted to copy it.
Regards,
Paul

Attributes are not displaying in Navigational Attributes area of DSO.

Hi Experts,
I have created a DSO and have included Info Objects 0SOLD_TO & 0SHIP_TO. In the Navigational Attributes area, its attributes are not getting displayed even though the attributes are in the info object.
What are the steps needed to perform for it to display there?
Waiting for your reply,
Thanks in advance,
With Kind Regards,
Shreeem

Hi Shreem,
If you want attributes of any master objects in navigational attributes section, you have make them navigational attributes while defining base info object.
Please follow the below steps.
1) goto RSA1, search for 0SOLD_TO & 0SHIP_TO info objects and open them
2) goto edit mode of info object and goto attributes section.
3) here you will find for every object "DIS" --- this means these attributes are display attributes.
4) If you want to change any attribute to NAV, then click on "Pencil Mark".
5) Now you can see text NAV instead of DIS for that attribute.
activate the info object and goto DSO, now you will see that attribute in navigational attribute folder.
Regards,
Venkatesh

My Custom repositories are not visible under content tab of ACC

Hi,
My Custom repositories are not visible under content tab of ACC ,eventhough i had appended my custom repository in /atg/registry/ContentRepositories.properties to the property
initialRepositories+=/myCustomRepository.PLEASE HELP ME.

Kindly make sure,
initialRepositories+=/com/training/club/tools/myCustomRepository
I assume you have config/com/training/club/tools/myCustomRepository.properties component. /com/training/club/tools/ is your path of component from config.
-RMisihra

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Error RSM006 "Attributes are not yet maintained"

Hello everyone, I have had a problem with two infopackages, one of them has the 0COORDER_TEXT datasource and the other 0COORDER_ATTR datasource. When I run the process chain with these infopackages, I have the error RSM006 "Attributes are not yet maintained", if I try to change these infopackages with the RSA1 I have the same error.
Do you have any suggestion to solve this problem?
Thank you very much.
Best Regards
Maximiliano Valin

Thank you, I check your recommendation and I found everything ok, the 0COORDER is ok and active, and the tranfer rules are ok and active too, I don't know what other thing could be the problem.
This is the help message that appear when the error happens.
Attributes are not yet maintained
Message no. RSM006
Diagnosis
The attributes have either not yet been created or activated.
The data cannot be taken from the source system without maintained attributes. Therefore, this data request is not possible.
Procedure
Maintain the attributes for this master data-InfoSource in the Administrator Workbench and then activate them.
Thank you for everything.

Process chain termination - Attributes are not yet maintained

Hi Experts ,
I am running a process chain in the production system , which is failed , however the below objects in the chain is completing successfully.
Please see the below msg descriptions
Attributes are not yet maintained
Entire chain now has status 'R'
Process Start Process, variant Technical InfoObjects Attribute Load has status Undefined
Process Execute InfoPackage, variant InfoPackage has status Undefined ...
Process Execute InfoPackage, variant BW Systems has status Undefined
Process Execute InfoPackage, variant InfoSource has status Undefined
Process Execute InfoPackage, variant InfoCube has status Undefined
Process Execute InfoPackage, variant Application Component has status Undefined
and many things which are undefined ..
Have nay one come across this issue , how to resolve this ?
Thanks

Hi,
Is there any changes done for the respective IP's/objects used in the chain recently. It might be the cause and before running jst test the chain using CHECK option and accordingly redesign, activate and schedule the process chain,
rgds,

My Customized Workflows are not triggering

Hi All,
I customized workflows.But in SWEL my all customized workflows are not triggering from the last two days..Before it was working..In SWE2 also done properly and SWU3 also fine.
Please give suggession whereis the Problem?
Regards,
Soni

If you look at the details of your event linkage entry (transaction SWE2) you will find that the "Check function module" field is not empty. The function module, when executed for the event you created, raised an exception - which is the standard way for a check function module to prevent a workflow from starting.
The check function module could be one set up for a workflow start condition, namely SWB_CHECK_FB_START_COND_EVAL. If so, check the workflow start conditions for your workflow (transaction SWB_COND).
Otherwise, examine the check function module's code to determine what it checks and why it prevents your workflow from starting.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b027453d11d189430000e829fbbd/content.htm">SAP documentation: Using (event) linkages</a>

Master data values(navigational attributes) are not turning up in the cubes

Hi all,
I have a cube, which contains 0cust_sales as master data and i have clicked on the navigational attributes of 0cust_sales like customer grp1, 2,3,4,5 etc
But then i have the 0cus_sales number 6100034 with all the navigational attributes turning up when i look up at the master data in the quality system.
But then for the same customer number i can see the customer number but no navigational attributes are turning up!!
I have activated master data and the master data contents are active!!
Can anyone pls update me on this!!
Thanks
Pooja

Hi
It is not part of dimension only 0CUST_SALES is part of dimension,
And ocust_sales-customer grp1, 2,3,4,5 are navigational attributes in the info cube. I have just included them as navigational attributes enabled in the info cube.
And when i loaded the data for customer say 6111035 from the ods to the cube. I can see the data for customer 6110035 but cant see the navigational attributes getting populated.
But when i look at the same in the master data for 0cust_sales i can see the values for the navigational attributes too!!
Thanks
Pooja

UWL : New tasks are not getting populated in the UWL

Hi Experts,
I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
When i am trying to configure the universal worklist system ,its givin me a caution message as <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
Sateesh

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

PO screen custom fields are not in correct order

Hi Experts,
After creating Shopping cart and purchase order successfully created.
Added my custom fields for PO structure INCL_EEW_PD_ITEM_CSD_PO fields are visible in PO screen automatically with out adding my custom fields in PO layout /SAPSRM/WDC_DODC_PO_I_BD
when i go to PO screen i can see my custom fields but all fields are not in correct order.How can my fields should be in order.
and i added two custom buttons in my PO layout for WD component /SAPSRM/WDC_DODC_PO_I_BD i am not able to see my buttons?
Could you please help me out in this issues its urgent.
Thanks,
Venkatesh G

I've had this problem. There may be a more elegant solution, but what I do is make a playlist of the album and put the movements in the correct order in the playlist. I've also put numbers (01, 02, etc.) in front of the name of the movements. Either one works.
Hope this helps.
Ben

ICR: customer postings are not imported in ledger if they come from SD

Hello,
For process '002' I have created a Special Ledger but postings that come from "SD" (Sales and Distribution) with those Ref. Procedure are not transferred to the ledger:
VBAK       Billing document
VBRK       Billing document
When creating the Special Ledger I have configured the following transactions to the Ledger:
COFI     Online-Posting from CO
GLA0     GL Act. Assessment:Integrative
GLD0     GL ActDistribution:Integrative
HRP1     HR Payroll
KOAE     Actual Settlement CO External
KZRI     Actual Imputed Interest
RFBU     FI Postings
RFRK     Reconciliation Posting CO->FI
RFT1     Travel Expenses
RMBL     MM Material Debit/Credit
RMM1     Material Ledger Settlement
RMM2     Initialization Material Ledger
RMPR     MM Material Price Change
RMRP     MM Incoming Invoice
RMRU     Goods Mvmnt fr Cmpltn Confrmtn
RMWA     MM Goods Movement
RMWE     MM Goods Receipt Purchase Ord.
RMWF     MM Goods Receipt Prod.Order
RMWI     MM Inventory Difference
RMWL     MM Goods Issue Delivery
RMWQ     Goods Movement Usage Decision
*SD00     SD billing Document*<-----
I expected that customer invoices posted from SD were transferred to the ledger but they do not.
Does anybody know how to get customer's invoices from SD transferred to the ledger?
Thanks in advance,
Rafael Barreda.

Dear Ralph,
Yes I did analyze this issue with GCD1. I did a special diagnosis for ledger I2.
Origin of original document: Sales (SD)
Activity: SD00 - SD billing Document
The results were:
Ledger I2 ICR 002 Ledger
General information
X Global ledger
Ledger table                     FBICRC002T
Valuation              0               Legal Valuation
Average balance ledger                 Export Ledger
X Line items                             Debits/credits indicator
X Set up balance c/f                     Summarize
Currencies and quantities
X Store transaction currency
    Second currency not defined          Currency key
    Third currency not defined           Currency key
    Store quantities                       Store additional quantities
Assignment information
Company code 1181                     Global company 1181
Fiscal year variant     K4             Chart of accounts PCGE
Activity SD00                          Field grouping code   Z001
    Required posting
Technical information
Fiscal year   2010                     Posting period 005
Period 005                            Maximum periods 016
Offset 005                             Blocking factor 016
Ledger selection conditions
&ZICR_002_I2
FALSE
I did not understand why selection coditions retuns "False". Rule ZICR_002_I2 is very simple and is as follows:
Acty Grouping Code - FI00            Ledger - I2
Trading partner not empty
And SD documents have got trading partner informed...
Thanks in advance.
Rafael Barreda

UWL custom attributes are not retreived

Similar Messages

Maybe you are looking for