DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

Similar Messages

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

Query Problem - Exclude operation is not supported for this characteristic

Hello all
I have a little issue with a report problem i have been given and wondered if anyone had any knowledge of this.
We have a report witn two heriarchy variables for profit centre. One is a authorisation variable and the other a custmer exit.
When we are in the report and try and drag out some profit centres or exclude some) it will not allow it and we get the following message: -
'Exclude operation is not supported for this characteristic'
Does anyone know why this is happening. I
Any ideas?

Hi Andrew,
if you have a chance confirm this with SAP Support, but I think excluding hierarchy nodes is not supported. The reason for this is the fact that it is not quite clear what should happen to the hierarchy structure when nodes are excluded. For example, what should happen to the value of the parent? Should it still contain the value of the excluded node under it?! or not?! One might want it one way, others might find the other more convenient.
Hope this helps.
Regards,
Maxim

ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture.

Hi,
I face a ERROR:MapLib:973 problem with inout port in a pcore component.
I need ton instantiate an inout port at the top level to communicate wih my peripherical.
This inout port is driven by an XPS IP core (pcore).
The .mpd is :
PORT fdata = "", DIR = INOUT , VEC = [31:0], ENABLE=SINGLE, THREE_STATE = TRUE,TRI_I = fdata_I, TRI_O = fdata_O, TRI_T = fdata_T
PORT fdata_I = "", DIR = I , VEC = [31:0]
PORT fdata_O = "", DIR = O , VEC = [31:0]
PORT fdata_T = "", DIR = O
The .vhd is :
fdata_o : out std_logic_vector(31 downto 0);
fdata_i : in std_logic_vector(31 downto 0);
fdata_t : out std_logic ;
I got ERROR:MapLib:973 - Tri-state buffers are not supported in this architecture messages for each
signals of my fdata PORT, while mapping !
Thanks for you help.

What device are you targeting, and what version of the software are you using?
I target a xc7k325t-fbg676-2.
I use ISE 14.3 form platgen to xst and 14.7 from map to bitgen.
What does your top level HDL (verilog or VHDL) file look like (where the IO must be instantiated)?
It is a .vhd in whitch i wrapp my top XPS core, described by .mhs
The problematic IO port is instantiated into the mb_core.vhd (generated by XPS).
If i open it, i could see that the tool correctly infer the corresponding IOBUF's :
component mapping :
fdata_I => FX3_DQ_I,
fdata_O => FX3_DQ_O,
fdata_T => FX3_DQ_T,
One IOBUF infered:
iobuf_1 : IOBUF
port map (
I => FX3_DQ_O(31),
IO => FX3_DQ(31),
O => FX3_DQ_I(31),
T => FX3_DQ_T
Top level port :
FX3_DQ : inout std_logic_vector(31 downto 0);
THEN FX3_DQ signal is dirrectly branched in my upper level (top level) vhd file, with the same name.
What do your constraints file look like (where the pin number and names get declared)?
The port is only constrained in .ucf, like that:
NET FX3_DQ[0] LOC = "B24"| IOSTANDARD = LVCMOS33 ;
NET FX3_DQ[31] LOC = "G26"| IOSTANDARD = LVCMOS33 ;#Bank 14

IOS AIR3.6 runtime error 3747 Multiple application domains are not supported on this operating syst

3747
Multiple application domains are not supported on this operating system.
I'm getting this error from an IOS app compiled with air 3.6.
No code has changed from Air 3.5 which is error free. Web app / android versions of the same codebase do not error.
See the stackTrace below ( well done Adobe for providing this since air 3.5 !! )
I use swfloaders for loading embedded swf vector art graphics. This has not caused any issue until now. Should I load all art into the main app's application domain ?
The error does not crash the app and I could suppress it easily but is could the tip of the iceberg because application domains are scary stuff.
Error: Error #3747
        at flash.display::Loader/loadBytes()
        at mx.core::MovieClipLoaderAsset()
        at mx.controls::SWFLoader/loadContent()
        at mx.controls::SWFLoader/load()
        at mx.controls::SWFLoader/initializeHandler()
        at flash.events::EventDispatcher/dispatchEvent()
        at mx.core::UIComponent/dispatchEvent()
        at mx.core::UIComponent/set processedDescriptors()
        at mx.core::UIComponent/initialize()
        at com.komodomath.app::ImageSWFloader/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/setMXMLContent()
        at spark.components::Group/set mxmlContent()
        at spark.components::SkinnableContainer/set mxmlContent()
        at spark.components::SkinnableContainer/createDeferredContent()
        at spark.components::SkinnableContainer/createContentIfNeeded()
        at spark.components::SkinnableContainer/createChildren()
        at mx.core::UIComponent/initialize()
        at com.komodomath.lesson::SaveStatusCheck/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/addElementAt()
        at mx.states::AddItems/addItemsToContentHolder()
        at mx.states::AddItems/apply()
        at mx.core::UIComponent/applyState()
        at mx.core::UIComponent/commitCurrentState()
        at mx.core::UIComponent/setCurrentState()
        at mx.core::UIComponent/set currentState()
        at com.komodomath.maingroups::LessonGroup/handleNewLessonClick()
        at com.komodomath.maingroups::LessonGroup/___LessonGroup_KButton1_click_lessonOver()

same issue as http://forums.adobe.com/message/4736711

MetaData operations are not supported when

Dear Experts
I am facing below error when trying to run my add-on in Windows Server 2008 R2 and SQL Server 2008 service pack 2.
Error: MetaData operations are not supported when a user transaction is active
It runs fine in Sql Server 2005.
Kindly tell me a solution to sort this out.
Regards
Shibin

Can we see your code, it looks to me like the error is quite descriptive - its saying you can't do any metadata operation (creating/updating user fields, user tables using userfieldsMD or usertablesMD objects) while in a transaction.
Previous SDK examples have shown that you can do it, but they it is not possible - it may be that SQL 2008 has a tighter control over this. (Did you also do a B1 upgrade, or just change SQL version?)
Are you running a transaction?

CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product

I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!

We only support ESXi
Sent from Cisco Technical Support iPad App

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

Mapping Error: Mappings are not required for this Integrator

Hi,
when I created my upload integrator with the Desktop Integrator Manager (12.1.2) I am not able to attach a mapping to it. I get the following error:
Mapping Error: Mappings are not required for this Integrator because the ability to download information has not been enabled.
Does anyone know what I've missed?
cheers
Jeroen

Hi ,
Without creating the content if you are trying to do mapping this error will come.
Solution:
Create the content and then do mapping..
Regards,
Sreekanth.S
Edited by: user12045904 on Dec 9, 2010 10:55 PM

Error in Installing Netweaver--domain controllers are not supported

When i make the pre-requisite check for installing Netweawer 2004s
I am getting the follwoing error
<b>installation to domain controllers are not supported</b>
Pls help me how to resolve this
Thanks in Advance

hi balaji,
FYI,
You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the DNS service is installed.
so try to log with a user, who has administrator rights. and check whtr all the services are up & running. then try to re-install.
for more on this refer the installation manual.
hope this will help you.
with regards,
Rajesh.
<i> plz, award with suitable points </i>

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

"error: thread-local storage not supported for this target"

I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this target
xs@gamera% gcc -v -D_REENTRANT -c -o func_stack.o func_stack.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
/usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
xz@gamera% cc -V -# -D_REENTRANT -c -o func_stack.o func_stack.c
cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -c -D_REENTRANT -V func_stack.c -o func_stack.o
/pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

Not able to create database even with a subscription. (The operation is not supported for your subscription offer type)

Hi,
I am trying to create a SQL server database, but are not able to. I get this message: The operation is not supported for your subscription offer type.
I have to azure accounts and this is only happening in one of them.
I have created a subscription, but I can see that I have 1250 NOK in credit that is expiring in 29 days.
Regards
Christian
ChristianLLoyd

Hi Christian,
The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
http://azure.microsoft.com/en-us/support/options/
You can check the following links for similar issues.
The operation is not supported for your subscription offer type
Could not submit the request to create database
DBNAME. The operation is not supported for your subscription offer type
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

Reg msg "Payment method(s) are not allowed for this program".

Hi...
I am copying a standard program RFFOES_T (Print program for bank transfer) into a custom program. When i try to execute the custom program it gives me a msg saying
"Payment method(s) are not allowed for this program".
Can you please Provide a solution for this problem.
Regards,
Indira.

Indira,
1.RFFOES_T is using Logical database PYF.Seems you have copied it as it is without changing the attributes of the program.
2.As it is using logical database PYF it needs to be tagged to the respective payment methods in FBZP settings as below
FBZP
>>Payment methods in Country
>> in the next screen click on position and give the company code and payment method
>> in the next screen select the corresponding payment method and click on the details(ctrlshiftf2) ie magnifying glass icon
>>in the next screen within Payment Medium you will get to see two radio buttons as Payment medium workbench(uses DMEE tree structure) and payment medium programs (uses the standard prog).Here in Payment medium Program either the standard prog or your zprogram should be tagged otherwise you will get the error message as you mentioned.
3.Once you tag the program in the FBZP setting to the respective payment methods,after the payment run you will be able to run the program.
4.If you don't want the program to be linked to FBZP settings then as far as my knowledge is concerned you need to avoid using logical database PYF and change the entire code using the regular database tables like reguh,regup,bkpf,bseg etc.(I think this should be the best approach)
Thanks,
K.Kiran.

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Similar Messages

Maybe you are looking for