Date Filter Error

Hi,
I create a report (columnar) with date filter, but when i try use the filter this error ocurrs:
ADC Server exception in OpenViewset().
ADC Server exception in OpenViewset(). [ErrorSource="ActiveDataCache", ErrorID="ADCServerException"] ERROR [42000] [Microsoft][ODBC driver for Oracle][Oracle]ORA-00911: invalid character [ErrorSource="msorcl32.dll"]
The filter is "FIELD_DT is greater than 10/1/2009 12:00:00 AM".
The DO is vinculated a External Data Source, and the field used is datetime type.
I use BAM 10.1.3.3.0.
Please, help-me.

Hi,
It is difficult to say from error message whether the problem is due to filter or some other condition in the report. If you suspect it is filter, can you please create a simple Updating Ordered List on the dataobject you are using to see if works and when you find it working, add the exact filter on it and then we would know if filter has issues?
Thanks,
Vishal

Similar Messages

VERY STRANGE Interactive Report Filter Error

I have a very interesting problem happening with an interactive report in my APEX application. The report runs just fine and has been in use for about 6 months. Just recently, the users have begun to run into problems when using the filter capability within the report. There is a specific column heading (RH Analyst) that they typically click on and select a specific analyst name (the list contains 10 entries). Most selections from the filter list work fine. However, when one specific name is chosen, they get the dreaded ORA-06502: PL/SQL: numeric or value error: character string buffer too small+* error.
I have been working to narrow the problem down and have found the following:
1. The filter error is related to the content of one specific column (not the one I am filtering on)
2. The column that is causing the error is a CLOB datatype
3. The data in the CLOB column was inserted into the database from a form utilizing an "HTML Editor Standard" type of item
4. The data in the CLOB column was copied and pasted from an email that was being viewed using Outlook 2007
5. If I try to recreate the problem with exactly the same information, but copied and pasted from Outlook 2003, I don't experience the problem.
6. The only people experiencing this problem are people who have upgraded their system from Microsoft Office 2003 to Microsoft Office 2007
7. When I try to load the form with the data that was stored in the database, I get a 404 page not found error. This is the same error that I get if more than 32k of data was saved into the CLOB.
The data pasted into the HTML editor from Outlook 2007 (_this is the data that causes problems_) and saved to the CLOB looks like this when I extract it in SQL Developer
(CLOB) <meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<meta content="Word.Document" name="ProgId" />
<meta content="Microsoft Word 12" name="Generator" />
<meta content="Microsoft Word 12" name="Originator" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_filelist.xml" rel="File-List" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_themedata.thmx" rel="themeData" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_colorschememapping.xml" rel="colorSchemeMapping" /><!--[if gte mso 9]><xml>
<w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true"
DefSemiHidden="true" DefQFormat="false" DefPriority="99"
LatentStyleCount="267">
<w:LsdException Locked="false" Priority="0" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Normal" />
<w:LsdException Locked="false" Priority="9" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="heading 1" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9" />
<w:LsdException Locked="false" Priority="39" Name="toc 1" />
<w:LsdException Locked="false" Priority="39" Name="toc 2" />
<w:LsdException Locked="false" Priority="39" Name="toc 3" />
<w:LsdException Locked="false" Priority="39" Name="toc 4" />
<w:LsdException Locked="false" Priority="39" Name="toc 5" />
<w:LsdException Locked="false" Priority="39" Name="toc 6" />
<w:LsdException Locked="false" Priority="39" Name="toc 7" />
<w:LsdException Locked="false" Priority="39" Name="toc 8" />
<w:LsdException Locked="false" Priority="39" Name="toc 9" />
<w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption" />
<w:LsdException Locked="false" Priority="10" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Title" />
<w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font" />
<w:LsdException Locked="false" Priority="11" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Subtitle" />
<w:LsdException Locked="false" Priority="22" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Stro..."The data pasted into the HTML editor from Outlook 2003 and saved to the CLOB looks like this when I extract it in SQL Developer
(CLOB) “Implementation and Compliance Update #2” addresses a concern that clearinghouses may be in some cases inappropriately charging providers for the use of a standard transaction. <o:p></o:p>
<ul type="disc">
 <li style="" class="MsoNormal"> In particular, we cite MN Statutes 62J.536, Subd. 1f, which states that: Group purchasers may not impose any fee on providers for the use of the transactions prescribed in this subdivision. The update explains that “payers (or their agents) may not charge for receiving a standard transaction” and provides additional information. The update is accompanied by a joint cover memo from MDH, the Minnesota Department of Commerce, and the Minnesota Department of Labor and Industry. Note: The Minnesota Department of Health (MDH) is charged with implementing and enforcing Minnesota Statutes, section 62J.536. In addition, the Minnesota Department of Commerce and the Department of Labor and Industry administer additional statutory requirements for electronic claims submission, consistent with MS § 62J.536. <o:p></o:p></li>
</ul>
“Implementation and Compliance Update #3” provides a reminder of the upcoming Dec. 15, 2009 effective date for rules for the standard, electronic exchange of health care remittance advices. It also clarifies that: <o:p></o:p>
<ul type="disc">
 <li style="" class="MsoNormal">Statutory requirements for standard, electronic remittance advices do not include requirements for electronic payment (electronic funds transfer – EFT) <o:p></o:p></li>
</ul>
<ul type="disc">
 <li style="" class="MsoNormal">Consistent with MDH’s enforcement policies and plans described in Update #1 (posted 6/5/09): <o:p></o:p></li>
</ul>
o Starting Dec. 15, 2009, group purchasers (payers) must be able to transmit – and providers must be able to accept - standard, electronic RAs via computer-computer electronic data interchange (EDI). So long as payers and providers are able to exchange the remittance advice standard transaction electronically, the Department does not take issue with payers making available additional mechanisms for communicating RAs to providers, such as access to portable document format (.pdf) files, or provider electronic mailboxes. <o:p></o:p>
<ul type="disc">
 <li style="" class="MsoNormal">The Department’s determinations of whether payers and providers are complying with the regulations will take into account several factors. However, we have determined that it is not realistic to require electronic remittance advices when claims ar..." I am using APEX version 3.2
Any help would be greatly appreciated. For now, my short term solution for them is to copy the information from Outlook 2007, paste it into a Wordpad, then copy it from wordpad and paste it into the HTML editor control. That seems to work fine but it is not a very nice solution for the users!
Thanks,
Dale

Roel,
Hey there! Hope you enjoyed your time off ;) Thanks for having a look...
Yes, of course I "could" update the functions, but this is NOT something I want to do. I'm one of those people that subscribes to Coding by Contract and the assertion routines at the beginning and end of my subprograms are an important part of that.
This may be a lack of understanding on my part with regards to the order in which Oracle does it's thing - or a bug in Apex... I'm able to duplicate the problem on apex.oracle.com: dmcghan/test/test.
Log into the demo app with admin/dmcghan. The home page has an interactive report, filter the name and you should get the error. When you look at the query you'll see a filter in the where clause that goes against the apex_collections table. This is populated from the post-authentication procedure. Let me know if you have questions.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur

Facing data type error when changing the order of fields in a query

Hello Experts
I am working on E sourcing 5.1.
I have a query with some filters . I want to change the position of a particular filter.
Basically I want to move a filter of type date to the top , so that it is the 1st parameter.
I was able to do this by reorder option.
However at runtime it gives me an error saying that "error u201CORA-00932: inconsistent datatypes: expected NUMBER got date."
Later I reverted back my changes so that the date filed is at its original position and faced no issues.
Query worked fine.
Is the order of filters important when executing a query.
Please suggest how can I move the date filter to the top of the query's filter list.
Regards
Vikas

Hello Vikas,
Its not the SELECT statements that you need to change. You have to change the WHERE caluse.
In the WHERE clause, some of the conditions will have some table column equated to a '?' symbol. This symbol is a place-holder for a filter prompt. There is a one-to-one correspondence between the '?' symbols and the filter prompts created in the query(under the Filter Prompt tab). This means that the first '?' corresponds to the first filter prompt, second '?' to the second filter prompt and so on.
Keeping the above information in mind, you can attempt to make changes to your query. You can duplicate your existing query and try your hands at it.
One more point worth mentioning : It is evident that if you need to use the same filter prompt at more than once place in the query definition, you have to create more than one instance of that query prompt.(Here by another instance I mean that the two filter prompts should have same values in their fields when you define them.) But even when you create more than one instance of a filter prompt, on the UI it will appear just as a single instance.
If things have become more confusing than before (of which there is a high probability ) then please go through the online help for Queries. It has got an extensive documenation and will be surely be of some help to you.
Good luck!!
Devesh

Report data binding error unknown column name

Hi,
I am having a problem with the new 7.02 update of Report
Builder. The issue is it's not finding my SQL query.
I have wrote my query initally in the advance mode, and it
doesn't seem to reconize it. Is there an issue with this?
I did manage to fix one of my reports by using the basic mode
and selecting all my tables and seting my linkage and criteria.
I have other computers that i have not updated to 7.02 and
they do not have this issue. Below is the error:
Error Occurred While Processing Request
Report data binding error Unknown column name : work_phone.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0;
.NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 127.0.0.1
Referrer
Date/Time 13-Jul-06 02:33 PM
Stack Trace (click to expand)
coldfusion.runtime.report.Report$ReportDataBindingException:
Report data binding error Unknown column name : work_phone.
at
coldfusion.runtime.report.Report.runReport(Report.java:420)
at
coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:96)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:106)
at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:157)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at
org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
This report works in 7.01. So all query variables match with
a variable in the SQL select statement.
Anyone have any Ideas??
Thanks,
Daniel

Thank you very much for help.
The "Unknown column name " is a field still used in my
report, so I can't remove it.
After I clear the query in the report and reopen the report
and apply the same query back to it, I get different error message:
Element TASKNUM is undefined in QUERY.
The error occurred in : line 1
-1 : Unable to display error's location in a CFML template.
I know for sure this "Element TASKNUM is undefined in QUERY."
is defined in query. each time it complains something different. I
get really confused.
Thanks again.
Yueming

Date Filter uses unknown property by default, doesnt work

Created a filterable and sortable table by dragging and dropping in VO from a AM. While it automatically sets the appropriate properties for filtering, and for non-date fields it works fine, for dates always "no row are found," even if I specifically choose a valid date where rows should return.
I noticed in the property inspector, the inputdate value in the column's facet filter is set to an invalid value (by default when dragged and dropped!). In the property inspector, the value is outlined in orange (value=#{vs.filterCriteria.trSentOnDate}, populated by default), and the tooltip states "filterCriteria is an unknown property."
Here's a snippet of the table def
 <af:table value="#{bindings.RequisitionsAllVO11.collectionModel}"
 var="row"
 rows="#{bindings.RequisitionsAllVO11.rangeSize}"
 emptyText="#{bindings.RequisitionsAllVO11.viewable ? 'No data to display.' : 'Access Denied.'}"
 fetchSize="#{bindings.RequisitionsAllVO11.rangeSize}"
 rowBandingInterval="0"
 filterModel="#{bindings.PoRequisitionHeadersAllVO1Query.queryDescriptor}"
 queryListener="#{bindings.PoRequisitionHeadersAllVO1Query.processQuery}"
 filterVisible="true" varStatus="vs"
 selectedRowKeys="#{bindings.RequisitionsAllVO11.collectionModel.selectedRow}"
 selectionListener="#{bindings.RequisitionsAllVO11.collectionModel.makeCurrent}"
 rowSelection="single"
 binding="#{backingBeanScope.backing_browseReqsPOs.t3}"
 id="t3">
 <af:column sortProperty="SentOnDate" filterable="true"
 sortable="true"
 headerText="#{bindings.RequisitionsAllVO11.hints.SentOnDate.label}"
 id="c26">
 <f:facet name="filter">
 <af:inputDate value="#{vs.filterCriteria.SentOnDate}"
 id="id2"/>
 </f:facet>
 <af:outputText value="#{row.SentOnDate}" id="ot20">
 <af:convertDateTime pattern="#{bindings.RequisitionsAllVO11.hints.SentOnDate.format}"/>
 </af:outputText>
 </af:column>BTW, I looked at the ADF RC Demos, and I noticed that for the filterable table demos, the date filter isn't enabled.

We're getting there.
New error now. I neglected to set the attribute Format and Format Type. I set those in the VO (Simple Date and MM/dd/yyyy, respectively), and now I get a nullPointerException.
I hit enter after entering a date, and a popup shows the following:
java.lang.NullPointerException
For more information, please see the server's error log for an entry beginning with: Server Exception during PPR, #2with the following in the DefaultServer log
Aug 13, 2009 11:14:35 AM oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
SEVERE: Server Exception during PPR, #2
javax.servlet.ServletException
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
...

Date filter in preview

Hi there,
Can anyone help me to see the error of my ways with date filters when using Preview and Designer to create reports.
If I create a Excel 2013 workbook with date filter on Power View they appear as they do in Excel and the current version of Power BI (O365 Add on)... see first Pic below.
If I use the Power BI Designer, or create a Report in the Preview the only filter 'structure' applied to dates is the checkbox structure for each date, and it's not functional either as the list of dates only shows approximately 30 instead of each day for
the last 5 years (which is the content of the data)... see second pic below
I was expecting any date filters to show as per the first Pic in all cases.
Is this just a bug??
Expected to see (uploaded Excel 2013 Workbook):-
but we see this (using the same model from the uploaded workbook):
The Power Query has the column 'added' defined as a date.
Thanks,
Tim
Thank you for you time folks!

Hi Bruno, thanks for the reply to the post.
The issue here is the way in which the UI works with this amount of data. So there are 1600 dates I'm the model and the UI only shows a small list of the dates. And you can't change the filter 'type' to allow rhea selection for a range of dates
like you can in the Excel 2013 Power View. This is odd because when you upload the Excel created Power View the functionality exists in the Power BI UI.
The issue is when using a date as a filter you can't appear to select the type of filter to allow the entry of a date range. This just appears odd, or a bug?? i'm going to use the good old date dimension table to allow the selection but most end users
of Power BI won't have rhe knowledge or the skills to build star or snow flakes... therefore this seriously restricts functionality in my view...
Hope MS resolves soon...
Thanks again. tim
Thank you for you time folks!

IDOC: Problem with data filter for IDOC extension field

Hallo!
I've created an idoc extension for the basic type DEBMAS06 that works fine. Now I want to use a data filter for one field ( company code ) of my segment. Every segment with a company code different from 100 should be filtered and not send to the other client. But what happend is that for all customers that have at least one company code different from 100, all segments including the one with cc 100 were deleted and a error "Segment ... does not exist for message type DEBMAS" appeared on the screen.
Does anyone have any ideas about this problem?

Not sure about changes to be made at the filtering options.
An alternative would be sending the data to XI as it is and perform the mapping to remove the unnecessary segments.
Disadvantage: Unnecessary processing of segment would be done at XI.
Advantage: The integration logic would be completely handled by XI.
Regards,
Prateek

Date Filter in 11g

Hi All
I Just upgraded my catalog and repository from 10g to 11g
Many of my answers where using a date filter CURRENT_DATE -1
In 11g this doesn't appear to work.
Formula syntax is invalid.
[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22023] An arithmetic operation is being carried out on a non-numeric type. (HY000)
SQL Issued: SELECT CURRENT_DATE-1 FROM "LDW"
OK (Ignore Error)
If i just use CURRENT_DATE it works fine.
Any idea why? Is there another way to get this in 11g?
Thanks

Hi Experts,
i think this issue not at solved because we are in OBIEE 11.1.1.6.6 we are facing same issue CURRENT_DATE-1 This is a bug or what?.
10g why its not saying non-numeric type (10g working fine ) CURRENT_DATE-1.
any help appreciated...
Regrds
Raju.

Data Filter on CSV file using Data Synchronization

gOT error When i used Data Filter on CSV file in Data Synchronization task, Filter condition : BILLINGSTATE LIKE 'CA'
TE_7002 Transformation stopped due to a fatal error in the mapping. The expression [(BILLINGSTATE LIKE 'CA')] contains the following errors [<<PM Parse Error>> missing operator ... (BILLINGSTATE>>>> <<<<LIKE 'CA')].

Hi,
Yes,This can be done through BEx Broadcaster.
Please follow the below stes...
1.Open your query in BEx Analyzer
2.Go to BEx Analysis Toolbar->Tools->BEx Broadcaster...
3.Click "Create New Settings"->Select the "Distribution Type" as "Broadcast Email" and "Output Format" as "CSV"
4.Enter the Recipients Email Address under "Recipients" tab
5.Enter the Subject and Body of the mail under "Texts" tab
6.Save the Setting and Execute it.
Now the Query data will be attached as a CSV file and sent to the recipents through Email.
Hope this helps you.
Rgds,
Murali

Data Filter issue with

Hi,
We have created a document from an Essbase ASO cube.
A data filter have been created in Essbase ASO Cube. The data filter is 'all Europe Region'. When this data filter is applied to the user and user logs in WA and accesses the document, the below error is produced.
========================================================
Loading this document produced errors.
Unknown members or dimensions have been removed from the document in an attempt to fix the problem.
Saving this document now will prevent these errors when the document is loaded again.
[1033] Native: 1001005 [Fri Mar 06 16:59:20 2009]uxsy9dbt.cos.agilent.com/vip_main/vip_main//Error(1001005) Unknown Member [Americas] in Report
==============================================
With no data filter assigned to the user, the report is fine...
Tested the same data filter in Excel-addin and there are no issues/error. Is there any setting that needs to be changed in WebAnalysis?

Following up even thought his is an old issue. Out of the blue my users began complaining their security in Web Analysis had gone awry. Their security in Excel add-in was fine though.
Most users use a WA Shared Preferences File here. However one user, unbeknownst to me, was able to hard code their userID/password in the "database" connection for the Shared Preference. So anytime another user logged in to Web Analysis, if you open the View Pane to see all the details, the Database user was John Doe - which was wrong, but the WebAnalysis user was John Smith - which was correct. The John Doe user like I said somehow managed to "save" his userID/pwd as the default, which caused all other users to "pass through" to Essbase as John Doe instead of as themselves, which means they were getting HIS filter not their own.
I wasn't able to figure out how he did that but to fix it I deleted his profile then Edited the Shared Preferences File | Databases tab | highlight database in question and choose Edit | change "Default logon" back to "Use User's ID and Password" instead of "Enter User ID and Password...John Doe|Pwd".
It works fine now. Users get their same, correct security filters applied whether they go in to Web Analysis or Excel add-in. (In Web Analysis we have it set up to open a report at a certain location depending on their security filters, so this was causing us quite a headache until we figured out what the problem was).
I opened a case with Tech Support to try and shed light on how the user was able to hard-code their login credentials in to the Shared Preference. Everyone only has Read access to that file, so. ?
HTH,
Karen S.

BI Composer - Date filter is not working

Hi,
Bi Composer -
=========
1)
Date filter selection is not working in BI Composer? is anybody faced such issue?
error message: "java.lang.nullpointerexception"
2) BI Composer not working with https link (SSL)
error message "Invalid BIPS Connection"
I am using obiee11.1.1.6.0, IE8 ,windows
Thanks
Deva
Edited by: Devarasu on Aug 31, 2012 1:23 AM

Hi,
1) Raised SR with MOS team and created bug it's fixed feature 11.1.1.7 version
Bug 14635134 - BI COMPOSER - CAN'T BUILD FILTERS ON DATE COLUMNS
From bug 14205672 it looks like this may already be resolved in 11.1.1.7.
2) for error "Invalid BIPS Connection" we need to configure composer via FWM - EM then save it and then commit that changes. after tested it's working fine.
SR reference
SR 3-6209577211 : BI Composer - can't build filters on date columns
Thanks
Deva
Edited by: Devarasu on Oct 22, 2012 11:22 AM
Edited by: Devarasu on Oct 22, 2012 11:27 AM

Create prompt with date-filter and initialize it with current date

Oracle BI 11 g
Hi!
I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
After that I tied to use Presentation Variable in Prompt, but also without success ((
Please, help me.

I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

Date filter issue

Hi all,
I want to filter my report with two date , one is coming from dashboard prompt as presentation variable and other i'm subtracting 7 days from the input date .
Here i'm using filter in advance sql like
"Alerts View".STATUS_DT <= '@{SDate}'
"Alerts View".STATUS_DT >= timestampadd(sql_tsi_day ,-7 ,Date'@{SDate}')
i'm getting date format error , below is the log
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 5/26/2009 does not match the specified format. (HY000)
SQL Issued: {call NQSGetLevelDrillability('SELECT "Alerts View".REVIEW_ID saw_0, "Alerts View".LAST_ACTVY_TYPE_CD saw_1, "Alerts View".STATUS_DT saw_2, "Alerts View".STATUS_DT saw_3, case when 1=0 then "Alerts View".STATUS_CD else ''Week'' end saw_4 FROM "Common Productivity Reports for Alerts" WHERE ("Alerts View".STATUS_DT <= timestampadd(sql_tsi_day ,0 ,Date''5/26/2009'')) AND ("Alerts View".STATUS_DT >= timestampadd(sql_tsi_day ,-7 ,Date''5/26/2009'')) AND (case when 1=0 then "Alerts View".STATUS_CD else ''Week'' end = ''Week'')')}Please help me if anyone knows.

my bad luck ........ still it did not work . but in that link Goran has written the below msg
Let's change now dateSeparator and dateOrder entries in localedefiniitions.xml to see what will happen. I want to see date in my user friendly format dd.mm.yyyy, with or without leading zeros (01.01.2008 or 1.1.2008), so I changed dateOrder to dmy and dateSeparator to zero (.).
so I changed dateOrder to dmy and dateSeparator to zero (.).
what is the meaning of --> dateSeparator to zero (.).
exactly what to put in dateSeparator tag.
he has clearly written for leading zero , we have to change dateSeparator.

Top Count in SmartView Data Filter

I'm trying to do a Top Count data filter in SmartView. I can get it to work in MDX no problem but I get the following error when I do it in SmartView:
"Cannot query members by name. Analytic Server Error(1007116): No dimension is tagged as Time dimension for virtual time series."
Do I have to have a dimension tagged as Time in order to use this function in SmartView?
Thanks,
Tim

You can try this code:
USE tempdb
GO
CREATE TABLE dbo.Car
(CarMake NVARCHAR(100),
CarModel NVARCHAR(20),
RedColorCount INT,
BalckColorCount INT ) ;
GO
INSERT dbo.Car
VALUES
( N'Maruti' , N'VXI' , 10 , 25 ),
( N'Maruti' , N'LXI' , 50 , 45 ),
( N'Maruti' , N'ZXI ' , 17 , 28 ),
( N'Maruti' , N'VDI' , 18 , 8 ),
( N'Maruti' , N'ZDI' , 25, 96 );
GO
CREATE FUNCTION dbo.GetTopCar( @NRows INT )
RETURNS TABLE AS RETURN
SELECT
CarMake ,
CarModel ,
RedColorCount ,
BalckColorCount
FROM dbo.Car
ORDER BY RedColorCount DESC
OFFSET 0 ROW FETCH NEXT @NRows ROW ONLY
GO
SELECT *
FROM dbo.GetTopCar(3);
SELECT *
FROM dbo.GetTopCar(5);
DROP TABLE dbo.Car ;
GO
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
 </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
 <connection-properties>
 <properties>
 <property>
 <name>xADataSourceName</name>
 <value>jdbc/SOADataSource</value>
 </property>
 <property>
 <name>dataSourceName</name>
 <value></value>
 </property>
 <property>
 <name>platformClassName</name>
 <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
 </property>
 </properties>
 </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Date Filter Error

Similar Messages

Maybe you are looking for