Desperate needing help with HP Pavilion DV7-1450us HDMI audio output
I have tried a lot of different things to get audio output to my tv with no luck. I get video output fine. I notice when right-clicking the speaker on my taskbar there is no option to enable HDMI audio output any help is greatly appreciated as we are waiting to watch a movie <_< thanks.
Hi Sez,
Try using Recovery Manager to reinstall your AMD Graphics Driver package as this will also reinstall the AMD HDMI Audio driver- the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
I need help with my pavilion dv5 1101el
please i need help with this http://h30434.www3.hp.com/psg/board/message?board.id=Hardware&thread.id=14565 i dont know if i posted it in the wrong page
but the audio driver wont work and wont install, the high definitio audio controller
Message Edited by Chinio007 on 09-03-2009 10:14 AM
Message Edited by Chinio007 on 09-03-2009 10:15 AMat last no help, wow i cannot believe this, i'll throw this pc to the garbage and IDT audio sucks ..why hp is using that crap?
-
Need help with PreSonus Firebox, MIDI, and inputs and outputs
Hey everybody, I'm new, and I just recently got Logic Pro 8 and a PreSonus Firebox. I have had no trouble with recording MIDI in Logic, but I have had problems with recording audio devices, like a guitar or a bass.
When I record MIDI, I hear it perfectly through the speakers on the Mac, and it records just fine. But the guitar won't come through. I have tried changing the core audio device to "PreSonus Firebox," in which case I still can't hear the guitar, but it records. Once it's been changed to this device, I can't hear anything else I've recorded either, like the MIDI. Once I've changed it back to "Built in input," I can hear everything, including the recorded guitar.
So the problem is, why can't I make Firebox my input, and my computer the output, so I can play through the Firebox and hear it on the computer?
Here is how everything is laid out: I have a Casio keyboard connected by MIDI through the Firebox, which is connected to my Macbook Pro through FireWire. There is also a guitar plugged into the Firebox. Please help, I'm really excited to start recording!sorry I'm not getting a few things....
1) how do I create a midi object?
you create the midi object in the midi inst layer of your environment. at the top left under the menu that says "new" select the very 1st thing in the list, "instrument" (midi instrument)
2) where do I assign the midi output?
after you create the instrument the perameters box opens on the left. you assign the port and channel there
5) where are the audio outs?
to what? the roland? doesn't it have audio output?
I've been reading the manual and have tried various
forums.... been trying to get this since last
night.... my brain. I know it's gotta be simple...
not real simple but not real hard either -
Desperatly need Help with itunes and ipod argument!!1
Itunes will work, slowly, until i plug pod in and then it sync's for about 10 secs and then every program running freezes. Itunes refuses to respond, cant close or open additional applications, can move external windows but they leave a ghost accross the screen.
i have done all the 5 R's to Pod, reinstalled itunes 3 times and run a virus scan twice - im at witts end, i hope someone can help. I have over 2000 songs on itunes and i cant do anything with them or my pod.
If anyone can help please either reply or contact me on: [email protected]
cheersHello! no, you haven't stumped the pros. This is a user board. No pros here to stump, just volunteers.
Shuffles are only designed to sync with one PC. Connect it to your PC and restore it to factory settings. Eject it. When your wife connects it to her PC, it should get recognized. -
I'm having difficulty setting up a closed loop control system that reduces one of my voltage outputs (connected to a high voltage system) by 30% every time a measured voltage exceeds a certain threshold value. I'm using a USB 6229 DAQ. I've been trying to create a waveform that looks like a DC signal, but the only waveforms that I can seem to manipulate while my VI is running are the stock waveform types. Also, I've tried to use a formula node or conditional structure to update the output value every time the measured voltage exceeds a given value, but everything I do reinitializes the output value every time it runs or won't store the previous signal value. I'm using LabVIEW 8.6 and don't have the PID or similar express VI's. I've attached the mess I've got working right now. Can anyone help? I'm really stuck!
Thanks!
Attachments:
HiV step down.vi 40 KB
output control.vi 100 KBI'm sorry it's such a mess; I'm still pretty new at this. These are both little driver programs for a larger overall control program.
Output control is meant to send a flat signal to the DAQ whose value can be manipulated while the VI is running. I have the second activated segment merely to check the values being output. I didn't realize I attached a version with a meaningless control...I had a control where the user would put in the stating voltage (the high voltage source has a 1V-100V setting for external control). I've attached this slightly different but equally dysfunctional version. Ideally, I would have liked something like the analog signal generator vi to come with an input wiring for offset on the DC signal. Most of the code was diabled because it is copied from an example; it is largely rubbish. I initially used the DAQ Assistant, but when things weren't working out I switched to putting in each step manually to try to troubleshoot.
As far as HiV step down is concerned, I've tried something different with a nested case structure (if that's the right terminology?), and I've attached that file. I think this problem has been solved, but you never know!
Attachments:
output control slightly different.vi 100 KB
HiV step down w case structures.vi 44 KB -
Need help with PCI Express X-Fi Xtreme Audio - Vista
Hi, bought this card pci exprss x-fi xtreme audio and installed, had a lot of problems in vista 64. Using a logitech z5500 5. soundsystem and first tried using the optical spdif to get DTS etc working but to no joy... Started using the 3.5 kables but nothing there either. And I cant find options to set the treble and base? the sound is really medioker as it is now.
Using the latest drivers for the card issued in may 08, latest alchemy and console files. what to do?
Dave?To Collipa and Dudeface:
If you installed the support pack for the card but still have driver problems, have you used windowsudpate under Windows 7? Creative submitted a basic driver for the card that shows up in driver options under Windows Update. If you can let Windows Update install that driver, then you can update AFTER rebooting with the new one.
If that windowsupdate did not work, try this:
Download the newest driver for your card. Then, if you already have winace, winzip, winrar or even the free 7Zip, then you can right click that Creative executable file and then choose to........extract to......and do so to a temporary folder on your desktop or say, c:\Creative driver.
Then go to device manager and sound video and game controllers, and to your problem sound card, click driver, and update driver and browse my computer for software, and "let me pick"? and "have disk" and then browse to.......
C:\Creative driver\Install\wdm
Whereever you downlaoded the file to, the important directory is the INSTALL\WDM and choose OK and it should show Creative X-FI. Let it copy files, and it does take awhile, and then reboot and see if your sound card works.
here is the newest driver for your card:
http://ccftp.creative.com/manualdn/Drivers/AVP/0963/0xF7C73FBB/XFXA_PCDRV_LB__04_0090.exe -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911 -
Problem with a Pavilion dv7 - Not Booting
Hello,
I've a problem with a Pavilion dv7 wich is not booting.
When I turn on the PC the F12 key (Wireless) is fix and red and Capslock is blinking.
After search on the forum, I try several things, turn on PC without its battery, turn on without RAM module (2 module with no module, only on,...) but each time I obtain the same F12 red and Capslock Blinking continuously (1 per second).
If someone have any idea to help me I stay tuned.
Thanks In Advance,
CyrilleHi Visruth,
I've clean the laptop with a compressed air bomb, so i don't think it's a overheating problem.
When I take out the hard drive I obtain the same symptoms, F12 LED Orange fix and Caplock LED flashes continuously (every 2 or 3 secondes). I did not find this combination (F12 Red + Caplock Continusly blinking) ?
For the record, this is the laptop of my stepmother and I am sure she did not make BIOS update ...
Anything else to help you to make the good diag ? A tools to boot with ? A hardware test to do ?
Regards
Cyrille -
I desperately need help with Mail, specifically sending
For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.
-
Need help with JTextArea and Scrolling
import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020What's the problem you're having ???
PS. -
Need help with trim and null function
Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
ThanksHi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
, NVL ( AL1.user_data_text, 'XX' )
FROM Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
, 'XX'
FROM Table -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Need help with Airport Express and so on.
Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection. -
I need help with shooting in my flash game for University
Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
//declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
minesInGame = 15;
//create a timer fires every second
mineMaker = new Timer(6000, minesInGame);
//tell timer to listen for Timer event
mineMaker.addEventListener(TimerEvent.TIMER, createMine);
//start the timer
mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
evt.target.x -= Math.random()*5;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseMine();
//declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
atmInGame = 15;
//create a timer fires every second
atmMaker = new Timer(8000, minesInGame);
//tell timer to listen for Timer event
atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
//start the timer
atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
evt.target.x -= Math.random()*10;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
bg_mc.x -=10;
function moveBackward():void{
bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
//makes the tank move by 10 pixels right
if (evt.keyCode==Keyboard.D)
tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(tankMine_mc);
//var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
//Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
cTime ++;
} else {
//if it has, then allow the user to shoot
shootAllow = true;
//and reset cTime
cTime = 0;
function updateHealthBar():void
percentHP = currentHP / maxHP;
healthBar.barColor.scaleX = percentHP;
if(currentHP <= 0)
currentHP = 0;
trace("Game Over");
updateHealthBar();USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key
-
Need help with conditional query
guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
"FGL_GRNT_CODE" VARCHAR2(60),
"FGL_FUND_CODE" VARCHAR2(60),
"FGL_ACCT_CODE" VARCHAR2(60),
"FGL_ORGN_CODE" VARCHAR2(60),
"FGL_PROG_CODE" VARCHAR2(60),
"FGL_GRNT_YEAR" VARCHAR2(60),
"FGL_PERIOD" VARCHAR2(60),
"FGL_BUDGET" VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH got_greatest_year AS
SELECT fgl.* -- or whatever columns are needed
, MAX ( CASE
WHEN fgl_period = :given_period
THEN fgl_grnt_year
END
) OVER () AS greatest_year
FROM fgl
SELECT SUM (fgl_budget) AS total_budget -- or SELECT *
FROM got_greatest_year
WHERE ( fgl_grnt_year = greatest_year
AND fgl_period = :given_period
OR ( fgl_grnt_year = greatest_year - 1
AND fgl_period = 14
;MiguelHi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH got_greatest_year AS
SELECT TO_NUMBER (fgl_grnt_year) AS grnt_year
, fgl_period
, TO_NUMBER (fgl_budget) AS budget
, MAX ( CASE
WHEN fgl_period = :given_period
THEN TO_NUMBER (fgl_grnt_year)
END
) OVER () AS greatest_year
FROM fgl
, got_cnt_00 AS
SELECT grnt_year
, fgl_period
, budget
, greatest_year
, COUNT ( CASE
WHEN grnt_year = greatest_year
AND fgl_period = '00'
THEN 1
END
) OVER () AS cnt_00
FROM got_greatest_year
SELECT SUM ( CASE
WHEN grnt_year = greatest_year -- New
AND fgl_period = :given_period -- New
AND cnt_00 > 0 THEN budget * 2 -- New
WHEN grnt_year = greatest_year
AND fgl_period = :given_period THEN budget
WHEN grnt_year = greatest_year
AND fgl_period = '00' THEN -budget
WHEN grnt_year = greatest_year - 1
AND fgl_period = '14'
AND cnt_00 = 0 THEN budget
END
) AS total_budget
FROM got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New".
Maybe you are looking for
-
Executable for report in PDF format?
Hi All, I have my XML template and RTF template ready. Now I need to merge them using concurrent program so that I can see the output in PDF. I need an executable for the concurrent Program. Which one I need to register as the executable? Any pointer
-
Inconsistent datatypes: expected - got CLOB
hi guys, i am currently doing a select from my table and in one of my selects I am doing a max() so therfore in the group by clause i have to group by every column that was not being used with max. As a result i get the error stated in the title of t
-
Dowl load the adobe download assistant and am getting the message system error
is adobe no longer doing the trail verson of photoshop
-
I have an iphone 4S and it has been doing crazy things like typing on its own. IT's like someone is shadowing my phone. Also, the left side of the phone keys get frozen, any suggestions or help would be greatly appreciated. Nothng worst when you ne
-
The user exit EXIT_RFEBBU10_001 calls (the transaction FEBAN)
Hi, we are using FEBAN transaction. Some customization was required to modify FEBEP/FEBRE fields. While implementing this in EXIT_RFEBBU10_001 it was noticed that this exit is called for all unprocessed lines from the bank statement, NOT only for