The user exit EXIT_RFEBBU10_001 calls (the transaction FEBAN)

Hi,
we are using FEBAN transaction. Some customization was required to modify FEBEP/FEBRE fields.
While implementing this in EXIT_RFEBBU10_001 it was noticed that this exit is called for all unprocessed lines from the bank statement, NOT only for the item we have chosen to post.
e.g.
the bank statement has unprocessed 20 lines and we would like to post only one of them. this exit is called 20 times in spite of the fact that we have choose posting only 1 line in the FEBAN.
I was not able to identify in this user exit the items we are actually posting with FEBAN and ignoring all other unprocessed items from the same bank statement.
the R_KUKEY is being passed to rfebbu00 and to the exit but I couldn't find where to get ESNUM of the item being posted?
Is it actually possible to do?
thanks
victor

Thanks, Martin!
but I am afraid I was not clear in my question.the EXIT_RFEBBU10_001 works less or more fine for us when called from the FEBAN. (the 2nd step, i.e. postprocessing after uploading) .
while doing unit testing I was only concerned that when a user is trying to post one line from the statement with FEBAN this exit is called for all unprocessed lines from the same statement and I was not able to identify the line the user is actually posting (which, in my opinion, may prevent posting the whole bank statement if the data in one line is not consistent with the logic programmed in the exit ).

Similar Messages

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

Finding the user-exits of a SAP transaction code

Hi All,
Can any one tell me how to find the user exits related to particular transaction code?
Regards,
Prem

Dear PremKumar,
*Please Search SDN Before posting any thread the question you have asked is already available since you are new to SDN and for your reference iam pasting the code copy paste the same code and execute and give the TCODE then it will list out all the exits.
*REPORT ZUSEREXIT.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
Can you closse the thread if your problem got fixed !!!!
Cheers
fareed

User-Exit/BADI/BTE for transaction /COCKPIT/1

Hi everybody,
I need to send and Idoc when a MM invoice enters the system from transaction /COCKPIT/1.
I already made a function to send the idoc but now I'm having trouble to find a place to fire it.
Any help would be very much appreciated.
Thanks.
Fábio Galvã

Hi ,
I dont know if replying on such an old link will help.
Did you find the user exit /Badi for this transaction?
Regards,
Kushmeen

User-exit for call new customize screen of another new program

Hello, I'm very appreciate for all who read this topic and give me some advice.
Anyone has an experience about customize standard program to create new screen
and add new screen to pop-up when user click some standard button to do something
for support business requirement and then continue to working the old step (such next old screen).
In QA11 (Manual UD), For posting stock quantity (After click button "Stock for inspection lot")
Business requirement need to avoid user to input stock quantity for unrestriced used (UR) and block
by after click button "Stock for inspection lot". Need to customize to pop-up new created screen for user
to choose sub-set of this inspection lot to post for UR or block by check box (Just overview)
Then after finish to select, Need to go back old screen ("Record UD : Stock" Screen) and default sum
of UR and block into screen (Automatic) for post to mvt.type 321, 350 later.
After checked, Not have any screen-exit after clicked button "Stock for inspection lot".
but i found 1 user-exit which was called after click above button.
So, Can i use user-exit to call new customize screen?
If need to go back from new customize screen to main screen, May have any problem? How to do it?
If finish to do in new customzie screen and need to continue display next old screen. How to do it in PAI of new customize screen.
Thank in advance

Can anyone provide the documentation for this BADI? Also, I'm concerned about the layout of the screen. Can this BADI do the necessary changes on the layout of the screen?
Thanks!

User exit/ badi for fb02 transaction

Hi,
what are the appropriate user exit/ badi for fb02 transaction for a disabling(graying out) a
payment block field for particular users..?
Regards,
Avi

Following are the exits available for FB02
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)

User exit or BADI in transaction code WAK2

Hi All,
I have a requirement to implement a user exit or badi on transaction code WAK2 or WAK1. On click of SAVE button after entring sales price in price planning tab . I need user exit or badi's after clicking save. I got three user exits 1. call customer-function '001' 2. Call customer-function '002' 3. Form badi_matnr_check_init 4. call method g_badi_matnr_input_002 but none of them deel with sales price field.
Thanks and Regards,
Asif

Hi friend,
Try this ampliation at CMOD:
WCOUP001
Try this BADI:
RDM_PROMOTION_WAK1
Regards,
Welinton Rocha

User exit or badi for transaction IW32

Hi all,
I am searching for user exit or badi for Transaction IW32 but not finding as per my requirement.here in transaction IW32 if field system status(STTXT) key value is 'Released', all line item components should get displayed in display mode.it should not allow to edit or change line item components.can anyone give user exit or BADI to achieve this.
Thanks in advance.
Regards,
Harshada

Hi,
Try to use this exit:
Enhancement     EXIT_SAPLBSVA_001     STATTEXT     Modification exit for formatting status text lines
Sample code:
IF ( sy-tcode = 'IW32') .
DATA: lv_str1   TYPE string.
FIELD-SYMBOLS : <fs_qmart> TYPE ANY.
lv_str1 = '(SAPLIQS0)VIQMEL-objnr'.
ASSIGN (lv_str1) TO <fs_objnr>.
SELECT SINGLE inact INTO lv_inact FROM jest WHERE objnr = viqmel-objnr
                                                 AND   stat = c_stat
                                                 AND inact = space.
    IF sy-subrc = 0.
      LOOP AT SCREEN.
          screen-input = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDIF.
Alternativ badi:
BADI     SAPLIQS0          IQS0_STATUS_MAINTAIN     Control of Changeability of User Status
I hope this may helpfull.
Thanks,
AMS

To determine the user exit name from teh transaction code (va02)

hi folks,
when i change teh partner number of ship to party and if i press teh SAVE button a user exit is getting triggered , i want to find out teh name of that user exit thats getting triggered as soon as i press that SAVE button .........the transaction code is va02
thanks in advance,
rajeev

hi rajeev,
try this link.
http://www.erpgenie.com/abap/code/abap26.htm
Regards...
Arun.
Reward points if useful.

To determine the user exit name from teh transaction code

hi folks,
when i change teh partner number of ship to party and if i press teh SAVE button a user exit is getting triggered , i want to find out teh name of that user exit thats getting triggered as soon as i press that SAVE button .........
thanks in advance,
rajeev

hi rajeev,
try this link.
http://www.erpgenie.com/abap/code/abap26.htm
Regards...
Arun.
Reward points if useful.

GL Account User Exit for all FI transactions

Hi Experts,
We have to create a Ztable and it stores GL bank account principal amount.
Ex: 130121 (SCB Bank) - Rs.10,00,000.00
In SAP , for the same GL account closing balances will available in FS10N of each month.
Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
Now, the requirement is..
I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
Hope u understood else pls let me know by your replies.
Pls advise.
thanks & regards
sankar.

Hi..
In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
Here u can write the code u want.
Regards,
Vishwa.

BADI / User Exit for APO Order transaction /SAPAPO/SNPTLB

Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
Vijaya

Hello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam

User exit or BADI for transaction QA11

Hi,
I need to find a user exit or a BADI that's triggered when saving in transaction QA11 in orden to change the value of the field "Quality Score".
I've already put breakpoints in all the user exits i could find but non of them is working.
Any advice will be appreciated.
Regards,
Roberto

Hi Roberto,
One of the following user-exits should be useful in your case:
QEVA0004 Exit for changing information line in usage decision header
QEVA0005 User subscreen for displaying add. data for usage decision
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetting
QEVA0008 Usage decision: Customer function key (e.g. to cancel UD)
QEVA0009 UD: Predefinition of quantity to be posted to sample stock
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print report
Or
Use the BADI INSPECTIONLOT_UPDATE ,there u find different methods,go for documentation and choose the appropriate method which is applicable for ur requirment .
I hope this will be helpful for u .
Thanks,
Sanjit
Edited by: Sanjit Dey on Mar 5, 2009 8:54 AM

User-exits or BAdI for transaction VL10B

Hello everybody,
I have to modify an outbound order during its creation from a purchase order in transaction VL10B. The modification is to update the serial numbers and the batch.
As the process is in background it is quite difficult to debug the process plus the problem that in this project I cannot modify the user-exits / badi just for testing. (they have implemented 'special' rules for these kind of modifications)
Does anybody know any user-exit or BAdI where I can update these serial numbers in this transaction VL10B?
Thanks in advance

Hi,
Check [ABAP Ninja|http://www.abapninja.org/] it may help you will the search.
Regards
Marcin

User Exit to call program to create IDocs.

Hi All,
For any creation/changes of material master using MM01/MM02 (after save ) one of the user exit will trigger.
From the user exit, I have to call the custom program to create MATMAS IDOCs.
if any failures in changes/creation of material master. It has to roll back eveything created by program.
Please let me know how to achieve this with out calling an event.
Thanks - Vinay

There are a number of standard methods to automatically create the IDOC. You can activate the change pointers and depending on need, use BD64 to create a distribution model, and create the necessary WE20 setups to create the outbound IDOC.
If you have to process the IDOC using custom logic, you can define that as well - although it's not clear why you need a custom generating program. You can insert code into one of the IDOC user-exits to manipulate the content if needed. Also, don't overlook the pre-delivered stuff from SAP that provides filtering out of segments and the like.
There are a few good SAP PRess books about doing ALE distribution -- if this is an unfamiliar area, it's worth the cost to buy one -- if you spend any time around IDOCS, you'll appreciate it.

The user exit EXIT_RFEBBU10_001 calls (the transaction FEBAN)

Similar Messages

Maybe you are looking for