Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Similar Messages

  • Need help with Airport Extreme and my new Verizon Fios Internet connection

    I just got the Fios install, and the tech and I couldn't figure out how to use my Airport Extreme as my wireless connection. I'm not real tech savvy (and I've only been a Mac guy for about 18 months). My current arrangement is the basic Verizon setup with the Airport out of the loop. How can I go about moving from here back to using my Airport Extreme? I need the range! Thanks in advance for your help.

    Have you tried resetting and reconfiguring the AirPort Extreme base station (AEBS)?
    Are you using OS 10.5 or OS 10.4 or earlier?
    Are you using the round 802.11b/g AEBS or the square 802.11b/g/n AEBS?
    If you are using OS10.5 OR the square 802.11b/g/n AEBS you should refer to "Designing AirPort Networks Using AirPort Utility" (direct PDF link).
    Otherwise you should refer to "Designing AirPort Extreme Networks" (direct PDF link).

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • How to extend wireless with airport express and time capsule

    So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
    I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
    TWO ADDITIONAL Qs:
    Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
    Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away ....   HELP!
    thanks so much (when did apple phone support start to be closed on Sundays?)
    cheers.

    Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
    Open AirPort Utility, select the Time Capsule and click Manual Setup
    Click the Wireless tab below the row of icons
    Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
    Click Update to save your settings and close AirPort Utility
    Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
    Click the Wireless tab
    Settings should look like this:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Same name as the Time Capsule network
    Check mark entered next to "Allow wireless clients"
    Wireless Security = Same setting as the Time Capsule
    Wireless Password = Same password as the Time Capsule network
    Confirm Password
    Update to save settings and close AirPort Utility
    Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
    Post back on your results.

  • Conflicts with Airport Express and Time Capsule

    I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
    Time machine back up doesn't work properly.
    Is there anybody able to help me?
    Regards

    What broadband type do you have?
    It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
    If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
    You may need to wait until Sat.
    Get in a big supply of home videos or something and try and starve off your addiction.

  • Problem with Airport Express and HP PSC 1410

    Please I really need help. I just bought a HP PSC 1410 (all in one) and I connected on Airport Express and I can't print trought it. I tried to connect it by USB and it work perfectly. When you want to had the printer in printer utility you can find the right driver for the printer. Rendez-vous can find it but you can not install it...
    I tried many different way but it never worked.
    please help me ???

    I suggest you return the PSC1410 for refund, or for credit towards the purchase of another printer. This printer will not work when connected via an Airport Express. When you purchase your next printer, chose one found on the unofficial compatibility list at http://www.efelix.co.uk/tech/1013.html
    In general, all-in-one printers are poor choices for connecting via an Airport Express. Even if you do get them to work, you can only make use of their printing function.

  • Hi-fi separates with Airport Express and Airtunes

    Hi, please could you tell me whether it is possible to use a hi-fi separates system with airport express? it doesnt seem possible to me but i thought i would ask.
    regards
    ste bond

    Ah. Much clearer to this antipodian now
    If you have a look at page 15 of the Setup Guide for Airport Express, available at http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf - it shows the connections it can be made to plug into.
    Every hi-fi system I've seen has stereo RCA jacks (red and white plugs) on the back for accepting auxiliary inputs. You'll just need to get the appropriate cable from your supplier of choice. If you system is more modern, using fibre optic cabling may be a better option (avoids ground loops, avoids multiple analog/digital conversions, etc).
    You can only use iTunes to send sound to the Airport Express, unless you get a third party application like AirFoil (from http://www.rogueamoeba.com/airfoil/ ), so technically "what I like" would need to be restricted to that which you had in iTunes, but basically, yes.

  • WDS setup with Airport Express and other(non-Apple) wireless router

    Hi,
    I am trying to configure a wireless network with one airport express and one Planex Wireless access point. Can anyone please point me to the settings to be made for such a scenario? I can use either of them as the main WDS device, and have a (wired)router provided by the ISP in the network.(so total 3 devices : airport, planex a/p , ISP router)
    Thanks.

    I'm having the same problem, both with a Linksys WRVS4400Nv2, and a WRT54G. I've not put much effort into the WRT, but the WRVS was such a pain that I don't think I can get it to work at all.
    The WRT doesn't have a section on WDS, but I've read that it's supported anyways, and nothing needs to be enabled on it. Is there a good step-by-step available here or elsewhere that uses close to the same router and Airport Express units, on the latest Airport setup software?
    Basically, I'm trying to set this up for a guy in an ~8000 sq. foot house so he has wireless throughout it, and he wants itunes streaming from the AX. Has anyone done this?
    Message was edited by: manderso

  • 3 powerline adaptors with airport express and extreme

    Hi all,
    I am currently using two airport express and 2 TP-LINK powerline adaptors to create a "roaming" network, however i would like to add another powerline adaptor and an airport extreme to my network.
    Modem -> Airport Extreme in the living room with an ethernet cable plugged into the powerline
    1st Airport Express plugged into the 2nd powerline adaptor
    3rd Airport Express plugged into the 3rd powerline adaptor
    so my question is will the above setup work? or do i need to connect another powerline adaptor into the main Airport Extreme making the whole network use a total of 4 powerline adaptors? however if only a total of 3 powerline adaptors are required, would the network be confused and render the whole network useless?

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Need help with Page Layout and Background Scaling

    hello, everyone.
    I am in the process of designing a new website for myself,
    and while I was researching nicely designed pages to use as
    inspiration, I stumbled upon this site:
    http://www.jeffsarmiento.com/
    obviously, the design is very impressive, but it also
    incorporates a lot of web mechanics that I have been trying to
    figure out, so I will use this page as an example.
    one thing I need help with is backgrounds. as you can see in
    the posted website, the creator used a seamlessly tiled paper
    texture to display the bulk of his content on. also make not of the
    pattern that is located to the left of the paper texture. how do I
    create seamless backgrounds like this that will scale to fit any
    amount of content or any resolution? I can't imagine that the guy
    that made that site created a new size background every time he
    made an update, so there has to be an easier way.
    the second thing that I am having trouble with is general
    site layout. I have read that most sites used series of invisible
    tables to organize there content, but when I open the source of
    this page in dreamweaver, he was using something different. div
    tags? should I be using these? who do I use them? are there any
    general layout tips that someone could pass on to me? perhaps a
    link to a good tutorial?
    please help me. i am very confused.
    thanks so much.

    IMO not a good site to emulate. To wit:
    Top background image:
    http://www.jeffsarmiento.com/images/bg-top.jpg;
    745px
    x 350px 137K
    Main background image:
    http://www.jeffsarmiento.com/images/bg-tile.jpg;
    745px x 950px 130K
    Total page size: 454K (Check here:
    www.websiteoptimization.com)
    Website usability experts routinely recommend a maximum page
    size of ~80K
    Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
    they suggest,
    "You speak about yourself approximately 0,003 times as often
    as you speak
    about your customers. Might that have an impact on your
    effectiveness?"
    That is 100% consistent with the #1 Web Design mistake:
    "Believing people
    care about you and your web site." or to phrase more
    expansively, "Our site
    tries to tell you how wonderful we are as a company, but not
    how we're going
    to solve your problems."
    www.sitepoint.com has some excellent books on making a
    website actually
    attractive and usable at the same time.
    Walt
    "beWILLdered_" <[email protected]> wrote in
    message
    news:[email protected]...
    > hello, everyone.
    > I am in the process of designing a new website for
    myself, and while I was
    > researching nicely designed pages to use as inspiration,
    I stumbled upon
    > this
    > site:
    >
    http://www.jeffsarmiento.com/
    > obviously, the design is very impressive, but it also
    incorporates a lot
    > of
    > web mechanics that I have been trying to figure out, so
    I will use this
    > page as
    > an example.
    > one thing I need help with is backgrounds. as you can
    see in the posted
    > website, the creator used a seamlessly tiled paper
    texture to display the
    > bulk
    > of his content on. also make not of the pattern that is
    located to the
    > left of
    > the paper texture. how do I create seamless backgrounds
    like this that
    > will
    > scale to fit any amount of content or any resolution? I
    can't imagine that
    > the
    > guy that made that site created a new size background
    every time he made
    > an
    > update, so there has to be an easier way.
    > the second thing that I am having trouble with is
    general site layout. I
    > have
    > read that most sites used series of invisible tables to
    organize there
    > content,
    > but when I open the source of this page in dreamweaver,
    he was using
    > something
    > different. div tags? should I be using these? who do I
    use them? are there
    > any
    > general layout tips that someone could pass on to me?
    perhaps a link to a
    > good
    > tutorial?
    > please help me. i am very confused.
    >
    > thanks so much.
    >

  • Need help with saving data and keeping table history for one BP

    Hi all
    I need help with this one ,
    Scenario:
    When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
    So i need to know how to have SBO fullfil this requirement ?
    Hope it's clear .
    Thanks
    Bongani

    Hi
    I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
    I'm using South African localization.
    Thanks

  • Airplay error with airport express and apple tv

    I receive this message "An unknown error (-15006) occurred while connecting to the AirPlay device" when trying to play audio from iTunes on Macbook Pro to my airport express and/or apple tv. Both airport express and apple tv work fine with my iphone and ipad as well as streaming video from itunes library to apple tv from the Macbook. I have tried the previously posted solutions, but nothing has worked yet.

    http://www.cultofmac.com/178460/the-real-reason-why-macs-before-2011-cant-use-ai rplay-mirroring-in-mountain-lion-feature/

  • Extending network with Airport Express and Airport Extreme (latest models) causes chaos on network

    Today I upgraded from my several year old Airport Extreme (3rd gen) and 2nd gen Airport Express to a new (what you'd buy on the shelf today) Airport Extreme and Airport Express.  All airports are updated with the latest firmware and I'm using windows 7 for configuration.
    The intention is to use the Airport Extreme as the main router, also serving wifi. And extend the network using the express. As such, the following has been done:
    The Airport Extreme is configured for automatic channel, and automatic radio mode. I tried to select 802.11n 5 ghz and 802.11 n 2.4 ghz only, but it won't take the changes. Additionally, it wont' accept me using only channel 6. Not sure why, but I digress. The airport extreme is not set to broadcast a separate name for the 5ghz network.
    The Airport Express is configured to use bridge mode, use an existing wireless network and is connected to my network on it's WAN port (the circle icon on the back) with ethernet. The password and wireless name used in configuration is the same as created initially on the Airport Extreme.
    Initially I did the configuration of both airports on my computer, connected by ethernet to ensure stable connectivity while I inputted settings. During this, they appeared to accept the changes fine. However, when I moved the airport express to it's destination (other side of my house), the entire network went crazy.
    Internet became slow, and often wouldn't load pages. This was on wired and wireless connections. When I attempted to administer the Airport in the Utility, they would not load, an error would occur. Also, at one point the Airport Extreme had renamed it self with a (2) at the end. Which was super odd. So far, the only solution has been to unplug the Airport Express and attempt to devise a solution.
    Anyone have any ideas? Of course, I will continue to tinker with this, but it seems realllly strange. The previous setup was also extended (granted, using wireless only, not ethernet > wireless) and worked fine, granted it was a smidge slow, but it worked.

    I wanted to add this.. I followed the guide here: http://support.apple.com/kb/HT4260 to extend using ethernet, and the above is the result.
    I just tried re configuring in OS X Mavericks and got the same, odd, result.

  • Need help with show/hide and layers moving

    I'm more of a designer, so I don't know code or CSS well at
    all. I'm doing an online portfolio for a class and need help with
    layers not staying in place in different browsers. The portfolio is
    created with a table, but I wanted to use the show/hide function
    for thumbnails of work. Are layers the only way you can use this
    function? I read layers don't work well with tables, so how else
    can I make it so when you mouse over a thumbnail, the larger image
    appears in another cell?

    > I don't know code or CSS well at all.
    That's unfortunate.
    > layers not staying in place in different browsers.
    Layers don't move. But the rest of your page does.
    Before you get too wrapped up in layers, though, please read
    this -
    http://www.great-web-sights.com/g_layerlaws.asp
    They are not good when be used as a primary layout method.
    > I read layers don't work well with tables
    They work fine with tables - but you have to understand both
    tables and
    layers to use them.
    Why not show us your page, so we can see what you are
    struggling with?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Bobbi67" <[email protected]> wrote in
    message
    news:ertd9h$h3m$[email protected]..
    > I'm more of a designer, so I don't know code or CSS well
    at all. I'm doing
    > an
    > online portfolio for a class and need help with layers
    not staying in
    > place in
    > different browsers. The portfolio is created with a
    table, but I wanted to
    > use
    > the show/hide function for thumbnails of work. Are
    layers the only way you
    > can
    > use this function? I read layers don't work well with
    tables, so how else
    > can I
    > make it so when you mouse over a thumbnail, the larger
    image appears in
    > another
    > cell?
    >

  • Is Printer HP Laserjet 1018 compatible with Airport Express and windows

    I am using HP Laserjet 1018 which is connected directly to the PC.
    As it is a USB printer but not a wifi one, can I connect it to Airport Express and will it be recognised ?
    Thank you for your answers.

    Hello TigerParis75,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    AirPort Utility 6.x: Use a USB printer on your Wi-Fi network
    http://support.apple.com/kb/PH5114
    Just make sure you have all the updated version of the drivers.
    Best of luck,
    Mario

Maybe you are looking for