Disable / Hide a substep in GAF
Hi folks,
I have a requirement where I need to conditionally hide or atleast disable certain substeps in the runtime in my GAF application.
I cannot create static substep variants since the conditions that drive the visibility/enablement are not static. They are driven off a table (Implying a condition which states that I show a substep today could change tomorrow to hide the same substep). However, currently I don't seem to be having any option to hide / disable a substep. The only method seems to be there in IF_FPM_GAF to enable_mainstep, but this applicable only to the mainstep and not the substep.
Any pointers will be helpful.
Thanks,
Puja
Thanks for your reply. Yes, I did activate the substeps in runtime. However, I was unable to manipulate it in runtime.
Its a great idea to have the UIBB loaded dynamically in the substep based on the scenario as you have suggested. However, I am not very sure how would I handle the navigation in the substeps, since that too is also dynamic.
Hence currently I have implemented it as such:
- I have a GAF application with 3 main steps.
- It is in the second step that I needed to have a dynamic substep roadmap option. Since I was unable achieve the dynamicity in the substep, I wanted to explore the option of having a tabbed component within the main step. I was unable to do this either. All I got in the screen was a blue line within the main step. I think it is an issue with the SP level we are on. I did not find a not for this either. Hence, my last , but non elegant approach was to embed a UIBB within the Mainstep2. The UIBB has a tabstrip UI component in it which I am loading dynamically. Hence my goal has been achieved. However I would have been happier had I been able to implement it via a dynamic substep approach.
Thanks a lot for all you answers Bhaskaran. You are extremely helpful.
Similar Messages
-
Disable / Hide Portal PCD roles which we don't want to display in UME.
Hi Friends,
I have configured ESS/MSS setup in our Portal;
Step 1)
a) We downloaded ESS/MSS business packages from SAP Market place
b) Deployed into our Portal.
c) I have checked in Portal Content Administration; ESS/MSS PCD objects i.e. Roles,Worksets,Pages and iViews were created inside the SAP Standard folder.
Step 2) As per my client recommendations u2013
a) We donu2019t want to use PCD objects directly from SAP Standard folder and we will keep those PCD objects as backup. So,
b) We created Client folder ex: xxABC inside Portal Content.
c) I copied ESS/MSS PCD folder from SAP Standard Folder and Pasted inside folder xxABC; and then we customized Roles and worksets based on our requirements.
Step 3) Role assignment to Users
When I search for ESS/MSS roles like u201CEmployee Self-Serviceu201D and u201CManage Self-Serviceu201D I am able to see each role twice u2013 one is from SAP Standard folder and another from client folder which I was copied.
So,
1) I donu2019t want to display ESS/MSS role which is inside of SAP Standard folder in UME(role search).
2) I donu2019t want to delete the role from this folder.
I got an Idea that is u2013 disable/hide Portal PCD roles which we don't want to display in UME while role search.
Please advise me, Is there any feature to disable/hide PCD roles in SAP Portal?Hi,
You can try to set '''plugins.hide_infobar_for_outdated_plugin''' to true in [http://kb.mozillazine.org/About:config about:config].
[http://kb.mozillazine.org/About:config_entries about:config Entries] -
Disable/Hide Blog from Mysite in SharePoint 2013
Hi All,
Do we have any chance to Disable/Hide creating blog option in Mysite 2013? When user accessing Mysite for the first time a new site collection is creating, any chance to avoid this? Do we have any chance to restrict users to create a sub site under mysite
2013?
Your help will be appreciated.
Thanks,
NisanthHi Nishant,
Hope the below links helps you
https://social.technet.microsoft.com/Forums/sharepoint/en-US/73a81d79-6f90-4256-bbba-dbb107419a68/hide-blog-feature-from-mysite-in-sharepoint-2013?forum=sharepointdevelopment
http://wellytonian.com/2012/10/restricting-permissions-on-mysites-sharepoint-2013/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ceb9a2df-f029-4ac8-b225-7627d114d682/sharepoint-2013-prevent-mysite-users-from-creating-subsite-except-allow-blog-site?forum=sharepointgeneral
Please remember to click 'Mark as Answer' on the answer if it helps you -
Does any one know how to Disable/Hide "BCC" from outlook/owa in office 365?
Hi,
Does any one know how to Disable/Hide "BCC" from outlook/owa in office 365?
Thank You.Hi Kavin,
You can try the below steps on the OWA server box,
search for this file name in explorer
File name: "messageoptionsdialog.aspx"
open this file in notepad
search for "chkbcc" you'll find something like this "input type="checkbox" id="chkBcc"
you need to update the LINE BEFORE IT to <td style="visibility:hidden">
Try this and let me now if this worked
Although I've not tried this for the OUTLOOK client, you can try this and check if you need
But this has worked for OWA for one of my client
I'm also not very sure if this can be achieved on all of your outlook users from a server admin point of view, coz this is a client feature and not a user specific active directory attribute.
Thanks & Regards
John Chris -
Disable/hide accounting document button on tcode MB51.
<b>Hi Experts</b>!!how can I disable/hide <b>accounting document button</b> on tcode MB51.
Please I urgently need the answer.
Help me please....Thanks in advance.
Godspeed..Hi,
Iam not able to See Accounting Document Button in MB51 transaction, can you confirm the Trnasaction Code.
Thanks,
Anitha -
Disable/hide Command Field in T-iViews
Hi All,
I have ctreatd some transaction iviews. I am using SAP GUI type as SAP GUI for windows, I there any way to disable/hide the command field so that user user cannot enter any other T-Code and navigate to that transaction.
Waiting for your inputs...
Regards,
SrinivasHi,
I have done that. I created that as a local object.
Below are the params i maintained for the system created
Application Host : My R3 Host
Using SSO
WebAs Host : FQDN of R3:8000
WebAs Path :/sap/bc/gui/sap/its/webgui
Protocol: http
ITS Host : FQDN of R3:8000
ITS Path :/sap/bc/gui/sap/its/webgui
Protocol: http
After that If I do a Preview, I am getting the below error:
The URL http://MyPortal.Node1:8000/sap/bc/gui/sap/its/se37 was not called due to an error.
Note
The following error text was processed in the system ECD : Template interpretation cancelled, syntax error.
The error occurred on the application server devecc_ECD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSFUNCTION_BUILDER
Function: RS_FUNCTION_INITIAL_SCREEN of program SAPLSFUNCTION_BUILDER
Method: IF_WB_PROGRAM~PROCESS_WB_REQUEST of program CL_FB_FUNCTION_INITIAL_SCREEN=CP
Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR===============CP
Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR_VIS_AS_DYNPRO=CP
Method: PROCESS_WB_REQUEST of program CL_WB_MANAGER=================CP
Method: PROCESS_REQUEST_QUEUE of program CL_WB_MANAGER=================CP
Method: IF_WB_MANAGER~SET_WORKSPACE of program CL_WB_MANAGER=================CP
Method: START_INTERNAL of program CL_WB_STARTUP=================CP
Module: MANAGER_START of program SAPLWB_MANAGER
User with which I am trying this is having SAP_ALL permissions....
More over, If I delete the ITS Params from the system definition, I am getting a Portal RunTime Error.
0}#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1zZEFWZjVWU1JNazVBRlg0ZWdLblNBLS1STFBvNnZPUEdYSnJaZjZCZnU1cWdBLS0=)/bc/gui/sap/its/se37&\#39; is not valid! Please check the protocol and host entries for system &\#39;ECC_DEV&\#39;.
Please help me, am I missing any thing????
PS: I am using the same system for T-Code iViews and are working fine.
Regards,
Srinivas -
Disable/Hide Index Tab in WinHelp2000?
Hi folks,
Is there any way to disable/hide the Index tab in WinHelp
2000?
We built a project using RoboHelp for Word (RoboHelp Office
X5) and the team decided they didn't have time to bother with an
index AND they felt the index would be of little value, since there
were tons of duplicate topics (formerly field names) with the same
name (ex: Description, Address, etc). They also didn't feel they
had the time to carefully "scrub" an index built using SmartIndex.
I tried building one using SmartIndex, and it stopped after it got
part way through several hundred Word docs (total of 517) and
several thousand topics (total of 2,680).
With all of the Index keywords stripped out of the project, a
blank index pane looks pretty ugly.
Any help would be appreciated.
Thanks,
JimColum,
Thanks for getting back to me. I agree - a well done index is
worth it, probably worth more than the full-text search in this
case. Unfortunately, when the help was originally created for the
DOS version of the application, the programmers decided to create
field level help for EVERY field (2,680 total). Since none of these
topics provided any context for which field belonged to which
screen, it's now kind of confusing to go through an index and view
17 different "County" fields from 17 different fields, all with
different descriptions. If I had the chance, I would have
completely changed the goal of the help into something more useful.
Jim -
How to disable / hide vslider tooltip in as3 when being dynamicaly created
Hi all,
Iv been looking all over the internet and can not seem to find a way to disable / hide the vslider tooltip.
I know in mxml you can do it via toolTipHide="false"; but i need to do the same in as3.
I am creating this vslider control dynamicaly in as3 and this option is the only thing slowing me down.
Any help is gratefull
TFCHi Jason,
Cheers for that.
I was going nuts, i could have swore blind thats how i did it once before using that toolTipHide, grrrrr lol.
Thanks for putting me on the right path now, all working great.
TFC -
Disable/hide navigation Back button in particular overview page
Hi All,
I have to disable/hide navigational 'Back' button on Task overview page. I tried to achive this in WD_HISTORY mehtod but no luck.
Please suggest me how to do this.
Thanks,
NanajiHi Laxmana,
I did the same thing as you suggested, by commenting the super class method we can just stop to go to previous page but not all the pages which are stored in back button history.
My actual requirement is, back button should not be visible to user or should not function anything. User should not use back button to navigate away. user must use 'save and back' or 'save' buttons.
Thanks,
Nanaji -
Disable (Hide) scroll bar in galleries
Hi
I don't think I can disable (hide) scroll bar in a galleries when I want to use only navigation. Right?Hi Peter,
Correct, please see my
post here that discusses one possible option that may or may not apply to your scenario.
Thanks. -
Disable, hide or disappear 'Search' from Start on account
Here is my problem, I have a computer with two accounts, Teacher (administrator) and Kids (standard /child), both are local accounts and would like to Disable, hide or disappear ' Search' from the Start Screen on the Kids account only! Any ideas? I know
this is possible using Group Policy Editor, but this would affect both accounts, any help will be appreciated.
Thank you
Rafael
Forgot to mention that I'm also aware that it can be turn off on in Control Panel/Turn Windows Features On or OffHi,
Even we hide the search bar in the start screen, kid can still search in other locations like Windows explorer or Internet explorer, so what is your final purpose? Maybe we can find a alterative solution. BTW, how about Kiosk metioned by Robert?
Yolanda Zhu
TechNet Community Support -
How can we disable/Hide the buttons at items tab in header level Gen tab?
Hi,
How can i disable/Hide the buttons(Delete,insert...) in item details of general tab of Order Header?
I am not able to do it with screen varients.
Please let me know your views.
Points will be given.
Thanks,
Adi.Hi,
How can i disable/Hide the buttons(Delete,insert...) in item details of general tab of Order Header?
I am not able to do it with screen varients.
Please let me know your views.
Points will be given.
Thanks,
Adi. -
Disable/Hide 'Cancel Requisition' option in PO Summary
Hi Experts/Gurus,
We have Oracle EBS R12.1.3.
We want to disable/Hide 'Cancel Requisition' option from PO Summary Form.
Navigation Path : Purchasing Responsibility > PO Summary > Query with PO > Tools (M) > Control > Cancel Requisition.
Anyone can help me in this case ?
Regards & Thanks in advance
SanjayHow To Remove / Disable Cancel Functionality In Enter Purchase Order and Purchase Order Summary Forms (Doc ID 1316584.1)
-
How can i disable/hide the calling form from fnd_function.execute
Hi,
How can i disable/hide the calling form from fnd_function.execute.If so can any one give the syntax.
thanksHi Francesco,
Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
Regards
Laurent -
How do I hide multiple steps in GAF FPM
I have a GAF FPM that has five steps. Based on some data condition I want to hide steps 2 and 3. I have implemented the interface IF_FPM_GAF_CONF_EXIT to get the OVERRIDE_EVENT_GAF method. WIthin in that I am calling the HIDE_MAINSTEP two times, however, it appears that only the second HIDE_MAINSTEP is taken.
Is there some way to commit or update between calls.
My code is:
CALL METHOD IO_GAF->HIDE_MAINSTEP
EXPORTING
IV_VARIANT_ID = 'MAIN'
IV_MAINSTEP_ID = 'Account'
CALL METHOD IO_GAF->HIDE_MAINSTEP
EXPORTING
IV_VARIANT_ID = 'MAIN'
IV_MAINSTEP_ID = 'Profile'
When I test my application only the PROFILE step is hidden. What do I need to add to make sure that both steps are hidden? I know that I can create a variant with these steps removed but in the end I will need to conditionally hide one to main of the five steps which will end up being main variants. Ideally I do not want to maintain all possible combinations of 5 steps.
Thanks for the help...Hi ,
i have used the following code on the FPM_START event IN OVERRIDE METHOD to disable the steps.
TRY.
io_gaf->get_mainsteps( IMPORTING et_mainstep = lt_main_step ).
LOOP AT lt_main_step INTO ls_main_step.
io_gaf->enable_mainstep(
EXPORTING
iv_variant_id = ls_main_step-variant
iv_mainstep_id = ls_main_step-id
iv_enabled = abap_false ).
CATCH cx_fpm_floorplan INTO lx_fpm_floorplan.
ENDLOOP.
ENDTRY.
Maybe you are looking for
-
We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood Firefox doesn't know how to open this address, because one of the following protocols (connec
-
Hi, I am trying to add a new check box to a custom screen. This check box must be connected to a new custom field of KNA1 table. I have created a new z data element (CHAR) and a new z field on KNA1. I have created the check box on the custom screen u
-
How do I set up an image / link for users to download a pdf form
I'm creating my first website through iweb. I need to have a place where my clients can download a pdf file. How do I do this? I have already made the pdf file a zip file. Then what?
-
In Edit mode the image gets distorted as if a graphics card error...
When I enter edit mode, many times the image gets distorted and is unrecognizable. The image is covered in red or green lines like when a driver or graphic card is having problems. I can view the image if I use the shift key or exit edit mode. Have t
-
Error when execute a planning function on selected line
Hello together, we are using SAP BusinessObjects Analysis 1.4 SP9 (1.4.9.3241, Office 2013) and SAP BW 7.3 SP 11 (SAPKW73011). When executing a planning function on an selected line in the crosstab, the following error appears: The VBA Coding used i