Displaying a prompt on report's initial load

Hi,
I know that in WebI I can set a prompt to be displayed when the data is refreshed but that's not what I wish to accomplish at the moment. What I want to do is to display a prompt when the report is first loaded.
Example: As soon as the user opens the report, he's prompted with something like "Filter report with year <operator> <year>"".
Thanks for the help,
Joaquim

Joaquim,
Kuldeep gave you the correct answer. You wrote:
Example: As soon as the user opens the report, he's prompted with something like "Filter report with year <operator> <year>"".
What you want is the local filter for the tab to apply a prompt based upon the data cached to that specific report (i.e. you want to save a report with the "refresh on open" off, but prompt on the static data). No can do. The prompt feature actually stages to construct an SQL statement, which in turns fires off a new query. There is no other prompt capability.
Thanks,
John

Similar Messages

Initial Load for marketing Attributes & Attribute sets in Cloud for customer 1405 version

Hi All,
I am working on Cloud for Customer Implementation with integration using Netweaver PI. SAP has just upgraded the CfC to 1405 version. In the latest integration guide & scenarios, there is provision to integrate marketing attributes & attribute sets as well.
I am following the latest integration guide (1405 version) but could not find any provision or template report for initial load of marketing attributes. Can anyone please assist in the initial load for marketing attributes?
Cheers.

Hello to all,
as the marketing attributes ar now supported in release 1502 i would like to ask you if there is now a way to perform an initila load for matketing attributes (Attribute Set, Attributes and Attribute assignemnt). This would be very helpful for all integration projects including marketing attributes.
Thnaks for your help and best regards,
Markus

How can we display the list of Report Names in Dashboard Prompt?

How can we display the list of Report Names in Dashboard Prompt?

Hi,
No its not possible to display list of reports in dashboard prompts.
Can do this using SQl results in prompt(we write query checking out report names manualy),but its not easy thing if you are having many report names to be displayed.
Assign points and close your threads if answered.
Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
Regards,
Srikanth

IE11 - Crystal Reports - PrintMode ActiveX now displaying PDF prompt (instead of printer prompt)

I asked this question over at stackoverflow and am now taking it here: http://stackoverflow.com/questions/20672254/ie11-crystal-reports-printmode-activex-now-displaying-pdf-prompt-instead-of
It's a simple straight-forward question. IE11 is breaking the ActiveX plug-in used for printing from the Crystal Report Viewer. All the pretty pictures are in the link I provided. But the jist is that for my ActiveX Print Mode reports, the PDF dialog is presented now instead of the normal Printer dialog (unless I use Compatibility Mode)
Other details:
I am using the Crystal Reports that comes with Microsoft Visual Studio 2008. For the life of me I can't remember how this got installed on one of my browser's (maybe an install from Visual Studio?) ... but I've been deploying the Crystal Print Control 10.5 (32-bit; version: 10.5.1.2285).
And as mentioned in the stackoverflow post I have all ActiveX settings enabled and ActiveX Filtering off.

Hi William,
Moved your post to the .NET SDK forum.
CR for VS 2008 was included in the installer of Visual Studio, you can remove it from Add/Remove Programs.
Unfortunately the CR Basic that comes with VS 2008 only had one patch released and that's it. IE 11 was not released when it came out so we could not support it.
Currently there are no versions of CR or our SDK packages that do support it.
Crystal Reports Developer for Visual Studio SP 9 will support IE 11. You can get it from the Overview Tab and then on the left side. But it requires VS 2010 or above and SP 9 will support VS 2013 and IE 11.
In VS you could select either ActiveX or PDF:
I don't have IE 11 but to change the PDF go into the Add-ins menu:
See this link for supported OS's and VS's:
http://wiki.sdn.sap.com/wiki/x/b4JiAw
Also, IE 11 is likely on Windows 2008 Server or possibly Window 8.x.
Best thing to do is upgrade VS and then download the CR installer into VS so it supports current OS's and Browsers.
Don

Control which Interactive Report is initially displayed.

Hi,
I have a page with an Interactive Report which has a default page and a saved public page called 'My Cases'. The interactive report is accessed from several different pages and I want to be able to display either the default page or the public page depending on where the user calls the page from.
For example, if the user accesses the page from Page 1, it displays the default interactive report, and if they access it from Page 2, it displays the saved public report.
I can see that the interactive report as an onchange="gReport.pull(this.value,'REPORT_CHANGED')" which is called when you change the Reports selection which is refreshing the report and displaying the relevant report. So I have tried to change the value when the page loads to the report I want by adding this
$('#apexir_SAVED_REPORTS').val('23219303448909609'); I realise the report id will change by session, but have hardcoded it just to see if I can get it to work.
I also tried adding apex.event.trigger('#report_id','apexrefresh') aswell but it doesn't seem to work
Any ideas on how I can achieve this?
Cheers
Paul

Hi ProfessorFudger,
According to your description, you want to create a report that the end user could enter the comment, then the comment could be sent to the report creator, right?
Reporting Services is used for rendering the report with data retrieved from datasource. In Reporting Services, we can retrieve data from the datasource then design a report, after the report processed, data is fixed on the report. So it’s not supported
to have the end users enter comment and fed back to report creator. For your requirement, it can’t be achieved currently.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Sub-reports displaying parameter prompt

I have a CR XI r2 application using the JRC that displays a list of reports and allows a user to select the desired report. I then programatically determine the paramaters needed and set the values required. This works fine except when I use a report containing a sub-report. Although I loop thru the report heirarchy including the sub report and set all the parameters it still prompts for the sub-report parameter in the viewer before displaying the report. I tried setting the enable prompting to false but that didn't help.

Hi,
It may help you.
Try to link the subreports with the main report Using Change Subreport Link.
And map the parameters to the main Report.
Thanks,
Saravanakumar..

Displaying prompts on reports

Is there a way of displaying the values that a user enters into report prompts when a report is run. Example would be date ranges so if the report is printed it is clear what the date range was for the report. I have logged this as a Service Request and it has been submitted as an Enhancement Request but curious if anyone has this worked out?

Thanks Mike, didnt realise that the active filters display also displayed the prompts. But was also wondering if there was a way to incorporate these prompt values into the report title in the header eg. 'Report XYZ for December 2008'. Thanks Gail

Powerview report initial loading time from Sharepoint bottle neck for almost 5 seconds

I would like to ask:
Beside the SQL Server CU10 patch update and sharepoint component update, is there some work around we can do to booze the initial load of 5 second performance bottle neck for Powerview connection?
e.g. run some schedule job to keep connection with power view service?

Hi Johnny,
If we render a Power View report that uses a PowerPivot workbook as its data source, slow performance might occur while the report is rendered. To work around this issue, we can refer to the following methods:
Reduce the complexity and number of sheets within the PowerPivot workbook.
Limit the number of Excel sheets and the complexity of what is located on them.
Limit the number of items on the Power View report.
Besides, I recommend you refer to the following article to troubleshoot Power View report performance issue:
http://blogs.msdn.com/b/psssql/archive/2013/07/29/tracking-down-power-view-performance-problems.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while Initial load

Hi Forum,
Iam doing Middleware setup for downloading customer master from R/3 to CRM.Iam trying to do initial load of customizing objects viz.,DNL_CUST_ACGRPB,DNL_CUST_ADDR,
DNL_CUST_KTOKD,DNL_CUST_TVKN,DNL_CUST_TVLS,DNL_CUST_TVPV... which are to be loaded before doing initial load of CUSTOMER_MAIN.
while doing initial load of customizing objects iam getting the below mentioned error
001 No generation performed. Call transaction GN_START.
002 Due to system errors the Load is prohibited (check transaction MW_CHECK)!
-when I do GN_START
"A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
Do you want to continue?" message is displayed
and I have sheduled it.
But in SMWP transaction I can see in
BDoc Types: Generation of other runtime objects
Not generated / generated with errors 2 entries
 31.08.2006 05:33:50
and the objects with errors are
POT_LISTWRITE
SPE_DDIC_WRITE
-In transaction MW_CHECK, system displays message as No generation performed. Call transaction GN_START.
when I regenerate these objects(generated with errors)from the context menu I find no difference.
I have also referred to the Note :637836 and 661067 which also suggests to run few reports and GN_START but inspite of doing all the corretion parameters in the note Iam still unable to come out of the situation.
Please Guide
Thanks in Advance
Shridhar.
Message was edited by: Shridhar Deshpande

Hi Rahul,
Thanks for the reply.I checked in transaction MW_CHECK and the system throws the message as
No generation performed. Call transaction GN_START.
In the long text the below message is available
No generation performed. Call transaction GN_START.
Message no. SMW_GEN_KERNEL005
Diagnosis
An upgrade was performed.
System response
The Middleware is stopped because MW objects must be generated.
Procedure
Excecute transaction GN_START.
If GN_START is executed,I dont find any change.
I also checked in smq2in CRM and I found the status of the queue as below
 CL Queue Name Entries Status Date
200 CSABUPA0000000042 5 SYSFAIL 31.08.2006 09:54:05 31.08.2006 09:54:11
Thanks
Shridhar
Message was edited by: Shridhar Deshpande

Horizontal Axis not showing when initial loading

Hi,
We are on Dashboard 4.1 SP3.
I have drilling down configured on the Dashboard report. The issue is when initial loading the dashboard. the horizontal text are not showing completly, untill I click the other column of the parent column, it shows the child horizontal text.
Could you please help.
Thanks,

Hi Dave,
There are some issues still in displaying the horizontal axis.
1844514 - Dashboard X axis labels are cutoff
As a workaround what you can do, use the range slider to make the date text to display vertically rather than horizontal or you can enlarge the size of the chart at the max to make them to display vertical.
Hope this helps!!!
--SumanT

Prompt to Report navigation - OBIEE 11g

Hello,
I've three tables (3 different requests) to be displayed in a page. Each of these tables has one identical column eg. project_name (but from different database tables).
My requirement :
1.I should have only one prompt to select the project_name at the first page
2.Only after selecting the project_name, the page should navigate to another page which displays all the three tables
Kindly let me know how can I get the prompt to report navigation done.
Thanks!
Dinesh

Hi ,
Only after selecting the prompt you have to show the reports means use the guided navigation.
Only after selectiing the Project_name , you can show your tables.
But this can be done on the same page not on other page as you needed.
Also check the below link may be helpful to you
OBIEE 11G - Navigation:How to open in New page/new tab.
Thanks,
Ananth

Display jpeg in abap report

Hi,
I would like to display a jpeg image in the initial screen of an abap report. I already have an image uploaded to SAP using the transaction SMW0 and I've also learnt from other threads in the SDN that I can refer to the sample program SAP_PICTURE_DEMO for reference.
However, I would like to have the picture to occupy the entire SAP window and would like the picture to resize automatically when the sap gui window is resized. Would anyone of you be kind enough to let me know if there are ways to do it.
Thanks,
Francis

Hi,
Please follow the links below
Re: Bar Code Generation in ABAP Report
Create Barcode in ABAP : conversion to PDF
also chk the link below, It also gives info about barcodes..
http://www.mecsw.com/info/appnote/app_024.html
hope it helps
Regards,
Manish

MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install

Hello everyone,
Long time Snow Leopard user here. I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010. Since installing Mavericks I've noticed two things:
1. Initial on boot load times seem much slower
2. The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again. But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait. This simply never happened in Snow Leopard.
I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time. However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time. Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded. It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard. It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense. Again - I'm not a computer science major so I'm largely just making things up
It also seems as if multitasking and switching between several open apps has seen a decrease in performance. Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around? Could it be as simple as Macs with only 4GB installed should not be allowed to even install Mavericks?
Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram? I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal? Does something seem off? Should I invest in a new SSD / RAM upgrade? I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
I've tried booting into OS X Recovery mode and using the Disk Utility. I've tried Safe Mode. I've included a "EtreCheck" report below. I'm open to any ideas / suggestions.
Thanks!!
Hardware Information:
 MacBook Pro (13-inch, Mid 2010)
 MacBook Pro - model: MacBookPro7,1
 1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
 4 GB RAM
Video Information:
 NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
 OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
Disk Information:
 Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
 EFI (disk0s1) <not mounted>: 209.7 MB
 Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
 MATSHITADVD-R UJ-898
USB Information:
 Apple Inc. Built-in iSight
 Apple, Inc. Keyboard Hub
 Logitech USB Receiver
 Apple Inc. Apple Keyboard
 Apple Internal Memory Card Reader
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Computer, Inc. IR Receiver
 Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Launch Daemons:
 [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
 [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
 [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
User Launch Agents:
 [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
 [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
 None
Internet Plug-ins:
 FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
 Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
 QuickTime Plugin: Version: 7.7.3
 JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
 AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
 Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
 AirPlay: Version: 1.9 - SDK 10.9
 AppleAVBAudio: Version: 2.0.0 - SDK 10.9
 iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
 Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
 Flash Player 3rd-Party support link
Old Applications:
 None
Time Machine:
 Time Machine not configured!
Top Processes by CPU:
 4% WindowServer
 1% EtreCheck
 0% mds
 0% mds_stores
 0% airportd
Top Processes by Memory:
 111 MB com.apple.IconServicesAgent
 94 MB Finder
 57 MB Dock
 53 MB SystemUIServer
 53 MB EtreCheck
Virtual Memory Information:
 1.64 GB Free RAM
 1.42 GB Active RAM
 314 MB Inactive RAM
 390 MB Wired RAM
 316 MB Page-ins
 0 B Page-outs

Wish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues.

Initial load failing between identical tables. DEFGEN skewed and fixable?

Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.

Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.

Initial Load of contract from ISU to CRM

Hi All,
We are working on the replication of contract from ISU to CRM.
We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc
When we are running initial load on SI_CONTRACT,only single BDOC is getting generated which is error free but still it contains no data.
Since its without an error ,we are not able to figure out whats the error is.
Regards
Nikhil

Hello Nikhill,
Could you resolve the problem?? I've a similar error, the BDoc is empty. The table everh is filed but the fields contractpos and contarcthead have value '0000000000000000' i think that is the problem. ANd the recport ECRM_CHECK_EVERH say that are misiing contracts.
Could you help me please!!!
Thnks!!

Displaying a prompt on report's initial load

Similar Messages

Maybe you are looking for