Dreamweaver and visual editing of ColdFusion Flash Forms

Does anyone nows how to
Visual edit ColfFusion Flash Forms in Dreamweaver CS3
??

The second part of your question doesn't make sense or you
are not explaining correctly. You have a grid which spawns a popup,
user selects company name and binds to text field. Ok. But you
should then submit that info to a query, no?
Also look into this:
http://www.asfusion.com/blog/entry/filtering-a-cfgrid-as-you-type--revisited-

Similar Messages

Custom 404 cfm pages, and ColdFusion flash forms not working together

Hi,
I've recently ran into an issue that I was hoping I could have a little help with. My company has been using custom 404 pages for awhile that we set up in iis however we had never set up this custom 404 page to display on .cfm pages, only missing folders. Ie; www.website.com/asdasdasdsd/ would display a custom 404 error But www.website.com/asdasdasdsd.cfm would not. I recently set this up by going in the iis properties for our site, went to the home directory tab click on configuration and selected edit from the mappings tab. From here I checked the verify that file exists open. This enabled the file.cfm custom error to appear however for some reason it disabled all of my ColdFusion flash forms. None of them appear now. If I undo the iis setting that I changed earlier they all re-appear. I got these settings from http://kb2.adobe.com/cps/000/95ee04fb.html and they do the job, they just disable my flash forms. Is there any way to do this without them disabling my flash forms from working?
Thanks!
Paul Alkema

Hi Paul,
Did you ever receive an answer to this (old) post? I'm having the same problem myself.
Thanks,
Michael

Convert Coldfusion Flash form to PDF?

Is it possible to convert a Coldfusion flash based form to a PDF form? I've tried it using Coldfusion 8 and Adobe Professional 8, but all I end up with is a blank PDF. It works just fine for a basic HTML based form. Is there some technical reason this doesn't work?... Because it seems rather stupid that ADOBE Coldfusion and ADOBE Acrobat don't work together properly.

It's an internal form, so i don't have any link. But the form is constructed using the standard flash form tags... example: <cfform name="form" action="exampleform.cfm" format="Flash"> <cfformitem> <cfformgroup> <cfinput> <cfselect> The entire form is mostly just a mix of those tags. Pretty standard stuff, but Adobe 8 Professional simply won't convert the form to PDF. Or, actually, it does but the form is blank. I'm usually just left with the graphic from the top of the page which likes outside the <cfform> tags.

Reset One field Only in Coldfusion Flash Form

I have a flash form with a fair amount date fields. I use the code
<cfinput type="datefield" name="DATE1" label="Diagnosis Date:" width="100" value="#now()#"/>
This is the master date field. It populates about 10 other date fields by using the following code for the other 10 fields.
<cfinput type="datefield" name="DATE2" label="Diagnosis Date:" width="100" bind={DATE1.txt}/>
There are certain cases where date fields 7-10 are not used. Unfortuantely, fields 7-10 in those cases are prepopulated because of the bind. I want to put a reset/clear button besides each of those date fields (7-10). Is there a way to code the reset/clear button to only clear the corresponding date field? Right now, I have the users choosing the same date as DATE1 to clear out the field. That is 2 clilcks. I would prefer the users just to click on a reset/clear button.
TIA!

Put this in your pipe. Does it smoke?
<cfform format="flash">
<cfformgroup type="horizontal">
<cfinput type="datefield" name="DATE1" label="Diagnosis Date 1:" width="100" value="#now()#"/>
</cfformgroup>
<cfformgroup type="horizontal">
<cfinput type="datefield" name="DATE2" label="Diagnosis Date 2:" width="100" bind="{DATE1.text}"/>
<cfinput type="button" name="date2button" onclick="{DATE2.text=''}" value="Reset Date 2">
</cfformgroup>
<cfformgroup type="horizontal">
<cfinput type="datefield" name="DATE3" label="Diagnosis Date 3:" width="100" bind="{DATE1.text}"/>
<cfinput type="button" name="date3button" onclick="{DATE3.text=''}" value="Reset Date 3">
</cfformgroup>
</cfform>

Using Dreamweaver MX to edit pages with Flash 9 Actionscript 3

I designed a site using CS3 and used Actionscript 3 and Flash
9 for a banner on the site.
The site pages will now be edited and updated by the owners
who have Dreamweaver MX 2004.
Is there going to be any problems or errors that can be
expected regarding the Flash banner/Actionscript? The owner will
not be editing the banner just updating some page content.
Thanks for your help

zuy377 wrote:
> I designed a site using CS3 and used Actionscript 3 and
Flash 9 for a banner on
> the site.
>
> The site pages will now be edited and updated by the
owners who have
> Dreamweaver MX 2004.
>
> Is there going to be any problems or errors that can be
expected regarding the
> Flash banner/Actionscript? The owner will not be editing
the banner just
> updating some page content.
No problem.
If they aren't updating that part of the page then nothing
will be
altered in terms of the code so it will continue to work.
A page is only html and can be edited in any html editor or
text editor.
I don't know how the owners are going to update the pages but
of course
by giving them access to all of the code they can ruin
everything if
they don't know what their doing........theres nothing you
can do about
that unless you create some sort of Content Management
System, which
only allows them to alter specific parts of the code.

Student and Teacher Edition Licensing Questions?

Hello! Are you allowed to use the Student and Teacher Edition of Adobe Flash Professional CS5 for commerical reasons (profit-seeking.) I haven't seen anywhere where it said you couldn't but someone said you weren't allowed to. Also, does "your private computer" mean you can't switch computers? If I were to purchase a new computer would I be unable to transfer to that one?

You can use student and teacher edition for profit it is licensed just the same as commercial. I can't find a link for the student version eula anywhere but I know I've read before from adobe that you can.
TheMonkeyTree wrote:
Also, does "your private computer" mean you can't switch computers? If I were to purchase a new computer would I be unable to transfer to that one?
No, that just means you can't install it on organization, educational , commercial or government computers. only your personal computer.

Flash Forms Stopped Working In ColdFusion 9

We moved our websites, many of which use Flash Forms, from a server running ColdFusion 7 to a server running ColdFusion 9.
At first all the Flash Forms in the various websites worked fine.
However, on the same day all the Flash Forms stopped working on the ColdFusion 9 server. No changes were made to the websites, to IIS 6, or to ColdFusion. We've restarted ColdFusion, IIS 6, and the server.
The error we get when loading a page that includes a Flash Form is:
412 Unknown
Here is the output reported by FireBug when loading a page (for example http://www.futurefamilydocs.org/test/testflashforms/index.cfm) that includes a Flash Form
The same page with the same flash form works fine in our ColdFusion 7 server (for example see: http://test.futurefamilydocs.org/test/testflashforms/index.cfm)
We cannot figure out what the issue is. Both servers are setup exactly the same Windows 2003, IIS 6, same ColdFusion settings, same access rights for internet users.
We'd appreciate any help as it will be significant work for use to change all the Flash Forms to normal forms. We're a small non-profit company and this is having a big impact on our members until we get it fixed or replace all the Flash Forms.
Thank You
Bruce Phillips

We have found the error message coldfusion is generating when we try to access a page that has a flash form:
C:\ColdFusion9\runtime\logs\coldfusion-event.log
03/29 13:02:45 user CFSwfServlet: Error: The class 'mx.rpc.RemoteClassRelayResponder' could not be loaded.
03/29 13:02:45 user CFSwfServlet: at C:\Inetpub\wwwroot\futurefamilydocs\test\testflashforms\inde.mxml:393
I researched that error and found suggestions to redo the IIS configuration for ColdFusion. I did that but still get the same error.

Dreamweaver and flash combined?

hey everyone, i'm new at both dreamweaver/flash and currently have a project combining the two together and i really cant work it out (i'm even using html instead of css haha) :/
Anyway, what i want to do is have a zipper (as in a zipper on ones clothes) on my main page and when someone puts their mouse over the zip, it zips down and reveals the text for that page.
I have gone into photoshop and started editing a zipper at different stages of being pulled down, but am stuck as to how i'd
a) link it together on flash/what type of file to save it as?
b) put the actual code into dreamweaver
c) have it actually working functionally to reveal my text underneath.
thanks in advance for any help, i'd be very appreciative of anyone who could give me some advice

Sorry what you wish to do would involve creating your entire page in flash (there is another way but unless you are competent in JavaScript!),
In flash create the first and last image then a transition between them.
As this is a dreamweaver forum, You would be better off visiting the flash forum if you are uncertain on how to do this.
Flash forum:
http://forums.adobe.com/community/flash
Once you have made your flash video, you can insert this into dreamweaver by selecting (from main menu in dreamweaver) insert -> Media -> swf.
Just as a by-note to realize the effect you wish (if you do not wish an entirely flash site, which I would not recommend), remove your flash code once it has played (or reset the z-index in css), using JavaScript.
Once you have made your flash (swf file), visit the DHTML section (for the javascript help), then return here for more info.
PZ

Coldfusion does not recognize IE11 - Flash forms not working.

This is a problem that has me banging my head on my desk. We have a web application that still uses Flash based web forms. (Before anyone says it, I know we need to get away from the flash forms, but we cannot do this overnight.) The problem is that because IE11 no longer passes MSIE in the USER AGENT string, ColdFusion is placing an <Embed> tag instead of an <Object> tag to load the flash. I know that we could add our site to the Compatibility List, however we have too many users to guide this through. We need a solution that we can perform on our side, either modifying code, ColdFusion, or IIS. First has anyone else run into this problem? Does anyone have any potential solutions?
Thanks in advance for your help.

We did find a stable work around that "tells" coldfusion to render flash forms for IE 10 even though the server call is coming from IE 11. I don't believe Adobe would necessarily want the method that we were forced to use advertised. It involved adding 10 lines of CF code to the top of each page that used flash forms. It was very unorthodox and we are simply using this to buy time to get our forms off the flash platform. I would be willing to email the solution to anyone interested.

Can ColdFusion.Ajax.submitForm be used with a CF Flash Form ?

Hello,
Adobe has provided a great example of how
ColdFusion.Ajax.submitForm can be used to submit forms without
refreshing or redirecting the page (
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=JavaScriptFcns_01.html),
but does anyone know whether it can be used with flash forms ?
The attached code from the example compiles and runs
perfectly when the form has not been defined as flash, but when you
change <cfform name="myform"> to <cfform name="myform"
format="flash">, submitting produces the following error, likely
because it no longer recognizes the form name/ID:
Error!!! -1: ColdFusion.Ajax.submitForm: Form not found, form
id: myform
Does anyone know how to integrate this feature into a flash
form ?
Thanks !
Lucien

Obviously it looks like you can not have <cfsetting
enablecfoutputonly="yes"> set in a cfm page that has Bind values
to a CFC, the behavior is unpredictable. I had to create an action
page to do the Asynch submit now it is returning a blank popup OK
form. The problem is still there and not returning any value
atall.

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

I installed CS3 Design premium upgrade yesterday onto my new mac OS X Yosemite 10.10.1. You gave me a new serial no (Case 0186381031). I have been able to open Photoshop, Bridge, Dreamweaver and Flash. The Illustrator, Indesign and Acrobat applications ar

I installed CS3 Design premium upgrade yesterday onto my new mac OS X Yosemite 10.10.1. You gave me a new serial number. I have been able to open Photoshop, Bridge, Dreamweaver and Flash. The Illustrator, Indesign and Acrobat applications are not in my applications folder although there are folders in there with those names containing associated items. How can this have happened and what can I do?

Janetc72338130 what happens if you try to reinstall Illustrator CS3, InDesign CS3, and Acrobat? What version of Acrobat are you installing?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Flash Forms and Checkboxes

I'm creating a Flash Form and I have a group of 4 checkboxes,
and the value part of the input statement is as follows:
<cfif
Isdefined('Form.whatever1')>1<cfelse>1</cfif>
<cfif
Isdefined('Form.whatever2')>1<cfelse>1</cfif>
<cfif
Isdefined('Form.whatever3')>1<cfelse>1</cfif>
<cfif
Isdefined('Form.whatever4')>1<cfelse>1</cfif>
But when I submit the record, all of the checkboxes are
recorded as "1", even if none of them or some of them are checked.
Has anyone developed a flash form with checkboxes and experienced
similar issues?
Thanks...

Oh, forgot to mention that I used the same code in a
"regular" form, and it worked. Just curious as to if this is a
known Flash Form problem

Flash Forms and Eolas Fix

Has anyone seen a workable fix with regard to the Eolas
problem. For those unfamiliar, I'm referring to the box around all
Flash content requiring the user to click before they can interact
with the form.
I'm particularly interested in the fix for Flash Forms in
ColdFusion. I have MX7 installed. I have a JS script for
movies...but to date, nothing works for Flash Forms.

Have you tried CFMX 702 updater? That has a fix for EOLAS
issue.
More details at:
http://www.asfusion.com/blog/entry/eolas-fix-for-coldfusion-flash-forms

Dreamweaver and visual editing of ColdFusion Flash Forms

Similar Messages

Maybe you are looking for