Enable JMS - Queue/Topic Trace on console

Hi everyone,
I want to enable weblogic QUEUE/Topic trace enable so i could view the messages on the console can anyone please help!
i already have logging enable for queues in the weblogic admin console but all the logs are going to jms.logging file which is not that helpful!
IN MQ i use to add additional parameter trace=true in front of each queue defined, please tell how i can enable it in weblogic!
TIA
sall0

To manage a queue's messages:
1. If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit (see Use the Change Center).
2. In the Administration Console, navigate to the queue resource that you want to configure:
* Navigate to JMS Resources in System Modules
* Navigate to JMS resources in an application module
3. Click the Monitoring tab.
4. Select the check box next to the queue, and then click Show Messages to access the queue's JMS Messages table. You can then
perform the following administrative procedures on a specific message or selected messages:
Click a message in the queue to open the View Contents page, where you can view the contents of a JMS message. For more information :-
Link : [http://download.oracle.com/docs/cd/E12840_01/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ManageQueues.html]

Similar Messages

Accessing JMS Queue/Topic located in different Managed server on same domai

Our use-case is as follows.
In our weblogic domain we have SOA_Cluster and a stand alone managed server. All the custom JMS resources belong to a JMS server that is targeted to stand alone JMS server. We are trying to access JMS Queues/Topics located in the stand alone managed server from JMS adapter (part of SOA Cluster).
I am wondering what should be our adapter configuration in this scenario. In going through JMS adapter use-cases (below is the link), there is a mention of how to access resources located in Remote weblogic Domain. I am wondering if the same applies to us OR if there is better way to access JMS resources for our use case.
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_jms.htm#CJAHAFGF
Appreciate your feedback.

Yes, the same applies for your case but no need to enable trust. Rest of the things will remain same.
Better you post weblogic related questions in Weblogic forum.
Regards,
Anuj

Regarding JMS-Queue/Topic in Proxy and Business service in OSB

Hi
I have one query regarding to the JMS-Queue/Topic.
I am published the message to the JMS-Queue/Topic.
----My Business-service configuration is---
General----Any xml
Tranport--jms://localhost:7001/MyConnectionFactory/RequestQueue
Response--None
I call this Business-service in proxy-service of Routing message was published successfully to thee Queue.
I try to dequeue the message from that queue for this
--- I take another proxy with---
General----Any xml
Tranport--jms://localhost:7001/MyConnectionFactory/RequestQueue
In meassage flow
Routing--second busines-service)
--- Second business-service configuration is---
General----Any xml
Tranport-File (C://temp)
Issue is when I publish the message to Queue,the message is also found in the file i.e C:temp. I don't now why this come to the file.*
Any suggestions
Thanks
Mani

Either I did not get an idea, but in your JMS proxy you are routing to File :)
If you don't want file, why route to 2nd BS ?

JMS,Queues/Topics,Weblogic8.1

Hi
Im newbie to JMS, and I would like to get start with
JMS,Queues/Topics on Weblogic8.1 .
Can anybody provide me urls which are easy to
understand as well as run the sample applications.
thnks..

Maybe its worth starting with a library that wraps up JMS for you so you can focus on POJOs and your application objects - like Lingo
http://lingo.codehaus.org/
James
http://logicblaze.com/

How to send BusinessEvent from oracle EBS 12 to an external JMS Queue/Topic

Hello Sir:
How to send BusinessEvent from oracle EBS 12 to an external JMS Queue/Topic??
How to receive BusinessEvent from an external JMS Queue/Topic to oracle EBS 12 ??
It is a Third Party JMS Server, it has queue and topic etc??
which module should be used??
what is the basic steps to do??
Thanks

swapnil_yeole wrote:
Hello,
We want to install Oracle EBS 12.1.1.
Our internet speed is very poor so it would not be feasible for us to download the software from E-delivery site.
Can you please let me know how & where to obtain Oracle EBS 12.1.1 DVD's.
Do we need to raise an SR with Oracle for same.
Thanks in advance.
Yes -- https://blogs.oracle.com/stevenChan/entry/how_to_obtain_media_packs
Thanks,
Hussein

Cleanup JMS queue/topic messages

          how do I clean up all messages left on a queue/topic ? thx.


There is no purge command.
          In 8.1, delete and recreate the destination via the console,
          JMX, or extensions.JMSHelper, the JMS
          server doesn't even need to be booted. A timestamp
          in the destination configuration is automatically set to
          let JMS detect that the destination is a new version.
          In 7.0, delete the queue, shutdown the JMS server,
          reboot the JMS server, and then recreate the destination.
          In any version, shutting down the JMS server will delete
          non-persistent messages.
          You can delete topic subscriptions via the console.
          You can write a simple JMS client to drain the destination
          by consuming messages. (Multi-thread multiple consumers to
          speed this up considerably.)
          Queen Tsao wrote:
          > how do I clean up all messages left on a queue/topic ? thx.

JMS Queue/Topic MDB

Es posible crear Queue/Topic diamicamente
Es posible crear los MDB dinamicamente.
de que manera se puede implementar.
gracias.

Hi Rolper
La capacidad de crear din�micamente un queue/topic depende de su abastecedor de JMS. La mayor�a de los abastecedores de JMS tienen un "API administrativo" para hacer esto - por ejemplo ArjunaMS (http://www.arjuna.com) proporciona un API comprensivo para crear queue y topics en runtime.
Hope this helps,
Tom Jenkinson

Web service which listens/replies over JMS Queues/Topics - HOW?

Hi all,
I need help - I have to implement the following Web Service for Weblogic 8.1:
- Simple Helloworld operation
- The Web service should listen on a Queue(or Topic) - say Queue1
- The response of the service should be put in another queue - predefined - say Queue2(or taken as propetry of the request "ReplyTO")
I looked for such an implementation in the available examples and forum topics, but without luck.
Please, give an example or a guide how to implement such a service if possible!
Thanks,
Ivo

Hi,
I have a work around to this problem please see if it suits you or you might already be knowing it.
Workaround is
1. Create a Simple Webservice as needed which puts a message in a Queue.
2. Create an MDB which listens to you Queue / Topic and call the created webserivce in the onMessage function of the MDB.
Vivek

Accessing JMS Queue located in stand alone managed server on same domain

Our use-case is as follows.
In our weblogic domain we have SOA_Cluster and a stand alone managed server. All the custom JMS resources belong to a JMS server that is targeted to stand alone JMS server. We are trying to access JMS Queues/Topics located in the stand alone managed server from JMS adapter (part of SOA Cluster).
I am wondering what should be our adapter configuration in this scenario. In going through JMS adapter use-cases (below is the link), there is a mention of how to access resources located in Remote weblogic Domain. I am wondering if the same applies to us OR if there is better way to access JMS resources for our use case.
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_jms.htm#CJAHAFGF
Appreciate your feedback.

Accessing JMS Queue/Topic located in different Managed server on same domai
Regards,
Anuj

Posting a message to JMS queue using B2B

Hi,
Could anyone suggest a solution for this scenario?
I have two trading partners say TP1 & TP2. Suppose TP1 is sending an xml message to TP2 using custom ebMS protocol, then at TP2, the message should be posted to a JMS Queue so that some other application can read it and process it.
The problem which I am facing is..
1) where to create that JMS Queue(I could not find any options for creating a JMS Queue neither in B2B console nor in enterprise manager console..!!)?
2) how to register TP2 to send msg to that JMS Queue(How that queue will be vissible to B2B)?
3) Should the endpoint be given as that JMS Queue while configuring the Delivery Channel for TP2?
Thanx in advance for your suggestions,
Regards,
Satya.

Hi Narayanan,
Thank you for your prompt reply. I understand that we need to create an external delivery channel to post the message to a JMS Queue from TP2. Currently I am using default AQ's (b2b.IP_IN_QUEUE & b2b.IP_OUT_QUEUE) at TP2 end to receive the message.
But, I want to post the message to JMS Queue. For this I need to create an external delivery channel and the corresponding end point should be the name of that JMS Queue. Is my assumption correct?
I have already gone through the thread that you have mentioned and the pdf as well. But, I am not able to find an option on how & where to create that JMS Queue?
Could you clarify on this?
Regards,
Satya.

Multiple Apps and Multiple Queues/Topics

          In WL7, is it possible to have two applications both do the same JNDI lookup and get
          different queues? This is possible with EJB's because Weblogic has its own local
          JNDI lookup that the java:comp/env/ejb/XXX references, however you cannot do the
          local lookup with JMS queues/topics. My situation is that I may have more than one
          client on a given box, and the messages going into a queue are destined for specific
          clients, but the programs are both looking up the same queue (e.g., jms/UpdateCache).
          Is the only way to do this through using filters? I don't want to make any code changes
          from one client app to the next.


You can configure same queue/topic on multiple servers by using
          JNDINameReplicated=false on the queue/topic so each queue/topic is only
          known locally. Then you can use dedicated connection Factory for each
          server and you can use different url to connect to different server.
          e.g.
          # two connection factories deployed on two different WLS servers
          # myserver1 has url like this: 192.0.0.1:7001
          # myserver2 has url like this: 192.0.0.2:7001
          # two JMS Servers deployed on two different WLS servers
          # each JMS server has an identical queue
          # you do not need to specify JNDIName for the queue if you can use
          createQueue
          # queueSession.createQueue("./exampleQueue1");
          # client (sender/consumer) using 192.0.0.1:7001 to get initialContext
          will use "cf1" and
          # lookup queue on myserver1
          # client (sender/consumer) using 192.0.0.2:7002 to get initialContext
          will use "cf2" and
          # lookup queue on myserver2
          # port of config.xml
          <JMSConnectionFactory
          JNDIName="jms.connection.exampleFactoryFormyServer1"
          Name="cf1" Targets="myserver1"/>
          <JMSConnectionFactory
          JNDIName="jms.connection.exampleFactoryFormyServer2"
          Name="cf2" Targets="myserver2"/>
          <JMSServer Name="exampleJMSServer1" Targets="myserver1">
          <JMSQueue
          JNDIName="jms.queue.exampleQueue1"
          JNDINameReplicated="false"
          Name="exampleQueue1"/>
          </JMSServer>
          <JMSServer Name="exampleJMSServer2" Targets="myserver2">
          <JMSQueue
          JNDIName="jms.queue.exampleQueue1"
          JNDINameReplicated="false"
          Name="exampleQueue1"/>
          </JMSServer>
          "David Cherryhomes" <[email protected]> wrote in message
          news:[email protected]...
          >
          > In WL7, is it possible to have two applications both do the same JNDI
          lookup and get
          > different queues? This is possible with EJB's because Weblogic has its own
          local
          > JNDI lookup that the java:comp/env/ejb/XXX references, however you cannot
          do the
          > local lookup with JMS queues/topics. My situation is that I may have more
          than one
          > client on a given box, and the messages going into a queue are destined
          for specific
          > clients, but the programs are both looking up the same queue (e.g.,
          jms/UpdateCache).
          > Is the only way to do this through using filters? I don't want to make any
          code changes
          > from one client app to the next.

Error JMS queue cannot be multi-conumer enabled

Hi
I wanted to enqueue using IPmessage type in java but I ended up getting the error
Exception: oracle.jms.AQjmsException: JMS-130: JMS queue cannot be multi-conumer enabled
Below is my java code. Anyone has any ideas.
public static void main (String args [])
throws java.sql.SQLException, ClassNotFoundException, JMSException
try
String ora_sid = "QA620";
String host = "localhost";
String schema = "OSA";
String password = "OSA";
String queueName = "IP_OUT_QUEUE";
int port = 1521;
Enqueue(ora_sid, host, schema, password, queueName, port);
System.out.println("You should see messages in IP_OUT_QUEUE. Should be buffered but they are persistent instead");
catch (Exception ex)
System.out.println("Exception: " + ex);
public static void Enqueue(String ora_sid, String host,
String schema, String password, String queueName, int port) throws Exception
String s5 = generateIdAsString();
String s6 = "";
String s7 = "Acme";
String s8 = "GlobalChips";
String s9 = "ProcessORDERS";
String s10 = null;
String s11 = null;
int i = 1;
String s12 = null;
if(!isNullString(s12))
i = Integer.parseInt(s12);
String s13="D:\\sas.xml";
if(isNullString(s13))
throw new Exception("No payload uri");
String s14 = readFile(s13);
byte abyte0[] = null;
String s15 = "";
if(!isNullString(s15))
abyte0 = readFileInByte(s15);
QueueConnectionFactory qc_fact = null;
QueueConnection q_conn = null;
QueueSession q_sess = null;
java.sql.Connection db_conn = null;
Queue queue = null;
AdtMessage adt_msg = null;
QueueSender q_sender = null;
oracle.xdb.XMLType xtype = null;
String data = null;
try
qc_fact = AQjmsFactory.getQueueConnectionFactory(host,
ora_sid, port, "thin");
q_conn = qc_fact.createQueueConnection(schema, password);
q_sess = q_conn.createQueueSession(true, Session.CLIENT_ACKNOWLEDGE);
q_conn.start();
db_conn = ((AQjmsSession)q_sess).getDBConnection();
queue = ((AQjmsSession)q_sess).getQueue(schema, queueName);
q_sender = q_sess.createSender(queue);
adt_msg = ((AQjmsSession)q_sess).createAdtMessage();
data = "<bolek>olek</bolek>";
///xtype = oracle.xdb.XMLType.createXML(db_conn, data);
//=====================================
//AdtMessage adtmessage = aqjmssession.createAdtMessage();
IPMessageOld ipmessageold = new IPMessageOld(s5, s6, s8, s7, s9, s10, s11, i, s14.toCharArray(), abyte0);
ipmessageold.setPayload(CLOB.empty_lob());
ipmessageold.setAttachment(BLOB.empty_lob());
//=====================================
//adtmessage.setAdtPayload(ipmessageold);
adt_msg.setAdtPayload(ipmessageold); //xtype
//try sending a buffered message, different ways, none of them works!
((AQjmsQueueSender)q_sender).send(queue, adt_msg,
DeliveryMode.PERSISTENT, 1,
AQjmsConstants.EXPIRATION_NEVER);
q_sender.setDeliveryMode(DeliveryMode.PERSISTENT);
((AQjmsQueueSender)q_sender).send(queue, adt_msg,
DeliveryMode.PERSISTENT, 1,
AQjmsConstants.EXPIRATION_NEVER);
adt_msg.setJMSDeliveryMode(DeliveryMode.PERSISTENT);
((AQjmsQueueSender)q_sender).send(queue, adt_msg,
DeliveryMode.PERSISTENT, 1,
AQjmsConstants.EXPIRATION_NEVER);
q_sess.commit();
q_sess.close();
q_conn.close();
catch (Exception e)
System.out.println("Exception: " + e);
}

Hi.. i'm trying to put an ADT message created using an ORA Message in the Topic. but i'm getting the conversion error!
below is the code.
* Preparing request Message
try {
                    requestMessage.setOsmOrderid("OSMOrderID12345");
                    requestMessage.setOsmEventVersion("OSMEventVersion1.0");
                    requestMessage.setEventType("SendOrder");
                    CLOB payload = CLOB.createTemporary(conn, true, CLOB.DURATION_SESSION);
                    Writer w= payload.setCharacterStream(1);
                    w.write(xml);
                    w.flush();
                    w.close();
                    //payload.setString(1, xml);
                    requestMessage.setEventPayload(payload);
               } catch (SQLException se) {
                    System.out.println("SQL Exception Occured :" + se.getMessage());
                    se.printStackTrace();
               } catch (IOException e) {
                    System.out.println("IO Exception!");
                    e.printStackTrace();
               AdtMessage request=((AQjmsSession)session).createORAMessage(requestMessage);
               System.out.println("ORA Message Created.");
               request.setJMSCorrelationID("ABG");
               request.setJMSMessageID("324324435435");
               request.setJMSDeliveryMode(AdtMessage.DEFAULT_DELIVERY_MODE);
* Creating Sender and sending message.
TopicConnection topicConn= AQjmsTopicConnectionFactory.createTopicConnection(conn);
               topicConn.start();
               TopicSession topicSess= topicConn.createTopicSession(true, TopicSession.CLIENT_ACKNOWLEDGE);
               Topic requestopic = ((AQjmsSession)topicSess).getTopic("BG_AQ_USER","BG_REQUEST_Q");
               MessageProducer t_sender= topicSess.createProducer(requestopic);
               t_sender.send(request, DeliveryMode.PERSISTENT, 1,600000);
and the error is:
java.lang.AbstractMethodError: oracle.jms.AQjmsSession.createProducer(Ljavax/jms/Destination;)Ljavax/jms/MessageProducer;
Instead of a topic connection, I tried using a AQjmsSession and instead of MessageProducer I've tried using AQjmsProducer as well... but the error persists... please help...

Sensors - Configuring JMS queue properties at runtime through console

Hi,
Kindly guide me with configuring of the JMS queue name at runtime for a JMS sensor configured on an activity in Jdeveloper's BPEL process. I have created a JMS sensor but i want to change the queue name at runtime without rebuilding i.e if possible through console. Does oracle 10g SOA suite gives ant such facility where by we can configure sensor related properties from console ??
NOTE: i m creating NON-BAM JMS and custom sensors

Hi,
This is not supported at the moment but planned to be added soon.
So right now, you have to redeploy the process in case of a sensor/
sensor action modification.
Regards,
Ralf

J2EE client mapping in WL6 - continued : jms queues and topics

How can one use "generic" (i.e. "java:comp/env/jms/myQueue") names in client
code for jms queues and topics,
since neither application-client.xml nor WL's myjarname.runtime.xml
have elements for them ?
I mean, jms managed objects are not env-entries (application-client.dtd
specifies that only primitive wrapper types can be valid env-entry-value)
nor resources (which I understand are all connection factories, for jdbc,
jms or mail ...).
In my ejb-jar.xml I use the resource-env-ref element :
<resource-env-ref>
<resource-env-ref-name>jms/CreationErrorQueue</resource-env-ref-name>
<resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
</resource-env-ref>
which can be mapped in weblogic-ejb-jar.xml
<resource-env-description>
<res-env-ref-name>jms/CreationErrorQueue</res-env-ref-name>
<jndi-name>jms.aregon.CreationErrorQueue</jndi-name>
</resource-env-description>
but I don't know how to map the jndi of such objects in a client
application.
Edo

Hi Sachin --
In the 10.1.3.1 release, a set of new commands have been added to admin_client.jar to support the command line creation of JMS resources:
-addJMSConnectionFactory -domain <domain> -jndiLocation <jndiLocation> [options]
-removeJMSConnectionFactory -jndiLocation <jndiLocation>
-getJMSConnectionFactories
-addDestination -domain <domain> -name <name> -jndiLocation <jndiLocation> [options]
-removeDestination -name <name> [options]
-getDestinations
You can read about it in the doc:
http://download-west.oracle.com/docs/cd/B31017_01/web.1013/b28950/adminclient.htm#CHDDFJJA
cheers
-steve-

How to create JMS Queues and Topics - OAS 10.1.3?

Hi,
Is there a way to create JMS Queues and Topics via the command line for OAS 10.1.3, say through admin-client.jar ?
I have read the "Managing Adminitered Objects" chapter from the "Oracle Containers for J2EE Resource Adapter" book and could not find the information I am looking for.
Thanks.
-Sachin

Hi Sachin --
In the 10.1.3.1 release, a set of new commands have been added to admin_client.jar to support the command line creation of JMS resources:
-addJMSConnectionFactory -domain <domain> -jndiLocation <jndiLocation> [options]
-removeJMSConnectionFactory -jndiLocation <jndiLocation>
-getJMSConnectionFactories
-addDestination -domain <domain> -name <name> -jndiLocation <jndiLocation> [options]
-removeDestination -name <name> [options]
-getDestinations
You can read about it in the doc:
http://download-west.oracle.com/docs/cd/B31017_01/web.1013/b28950/adminclient.htm#CHDDFJJA
cheers
-steve-

Enable JMS - Queue/Topic Trace on console

Similar Messages

Maybe you are looking for