Posting a message to JMS queue using B2B

Hi,
Could anyone suggest a solution for this scenario?
I have two trading partners say TP1 & TP2. Suppose TP1 is sending an xml message to TP2 using custom ebMS protocol, then at TP2, the message should be posted to a JMS Queue so that some other application can read it and process it.
The problem which I am facing is..
1) where to create that JMS Queue(I could not find any options for creating a JMS Queue neither in B2B console nor in enterprise manager console..!!)?
2) how to register TP2 to send msg to that JMS Queue(How that queue will be vissible to B2B)?
3) Should the endpoint be given as that JMS Queue while configuring the Delivery Channel for TP2?
Thanx in advance for your suggestions,
Regards,
Satya.

Hi Narayanan,
Thank you for your prompt reply. I understand that we need to create an external delivery channel to post the message to a JMS Queue from TP2. Currently I am using default AQ's (b2b.IP_IN_QUEUE & b2b.IP_OUT_QUEUE) at TP2 end to receive the message.
But, I want to post the message to JMS Queue. For this I need to create an external delivery channel and the corresponding end point should be the name of that JMS Queue. Is my assumption correct?
I have already gone through the thread that you have mentioned and the pdf as well. But, I am not able to find an option on how & where to create that JMS Queue?
Could you clarify on this?
Regards,
Satya.

Similar Messages

How to read Java Object message from JMS Queue using JMS Adapter .

Dear All,
In my scenario i have to read a java object message from JMS Queue . I tried by using the JMS Adaper ,but i am not getting any Payload . Can any one tell me is there any special settings for JMS Adapter to read the Java Object message .
I am able to read the Message successfully thru JMS Adapter but in SXMB_MONI it is not showing any payload .
I also went in Message monitoring but i am getting this type of message in Sender JMS Adapter in Audit Log.
JMS Message ID XXXXX Message Type Null unknown.Payload can not be read and will be empty.
JMS Message ID XXXXX Payload Empty can not read.
Please Help.
Lateef

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

Unable to send messag to JMS Queue using Java

Hi all,
I am trying to send a string to the JMS queue using java. I am unable to send the message. It is getting failed at the look up for connection factory. I am using the below code for this purpose.
public static void messageEnqueue(String payload) throws JMSException,
NamingException,
IOException {
Session session = null;
MessageProducer publisher = null;
TextMessage message = null;
Context context = new InitialContext();
QueueConnectionFactory connectionFactory =
(QueueConnectionFactory)context.lookup("*java:comp/env/XAConnectionFactoryJNDIName*");
Connection connection = connectionFactory.createConnection();
Queue Queue1 =
(Queue)context.lookup("*java:comp/env/QueueName*");
session = connection.createSession(true, Session.AUTO_ACKNOWLEDGE);
publisher = session.createProducer(Queue1);
message = session.createTextMessage(Payload);
connection.start();
publisher.send(message);
connection.stop();
connection.close();
kindly help on this.
Thanks
Edited by: 887737 on Jun 28, 2012 9:47 PM

887737 wrote:
Hi EJP,
This is the Exception I got when I ran the java class directly from Jdeveloper. Can't I run the standalone class directly from Jdeveloper to insert the message into remote queue?
Exception in thread "main" javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:645)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:325)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javamail.MessageEnqueue.messageEnqueue(MessageEnqueue.java:30)
     at javamail.MessageEnqueue.main(MessageEnqueue.java:51)Hmm. The stack trace doesn't involve any JMS code. Is javamail.MessageEnqueue.messageEnqueue your application? It seems to be doing a JNDI lookup, and you haven't configured JNDI properly. Exactly how to do this depends on what JNDI provider you are using. Earlier in the thread you mentioned you were using WebLogic, so the answer may lie in the WebLogic documentation.
Nigel

How to Read Message from JMS Queue using Business Service(ALSB3.0)

Hi,
My Project Set up is as follows(using ALSB3.0).
1>One Proxy Service with transport as HTTP.
2>The Proxy service is calling another Business Service.
3>The Business Service has transport layer as JMS.
So here the business service is posting Request Message into the JMS queue.
I want at the same time it(The Business Service) should listen to another queue and from there it should read Response Message and forward back to the caller proxy service.
Can any one help me regarding this...
Thanks in advance...
Deba

Hi ,
Problem in : Reading / writing messages to the JMS Queue -
I am stuck with the same problem and I am not able to proceed futher, Can you please help me out in sending an example of how to do right configurations in ALSB and on the server. I read the documentation but still I dont see messages in the queues.
please help me out. can you post a small sample example
thanks
adi

Push different type of messages to JMS Queue using JMS Adapter

Platform: Oracle SOA 11g. JMS Adapter.
I got to push different types of messages as string to same queue. JMS Adapter requires schema to push a message to a queue. Since messages are of different types, how can I push them into queue. I tried to use singleString schema. Result is that actual message gets wrapped into <singleString> root element which is not the required result.
Any hints or links shall be appreciated.

Thanks fo ryour reply and help. I appreciate that.
Wrapping of original message in <singleString> element is done by JMS Adapter as the very last activity/setting. I am not composing/transforming message into final shape with singleString through transformation.
Once message is with JMS adapted on one end, it is in Queue on the other end. No control.
Since consuming end is not in my control and requires the actual message in Text format, I need to have the message target queue in Text format.
If I select the Opaque schema, following error message is thrown.
<bpelFault><faultType>0</faultType><mismatchedAssignmentFailure xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"><part name="summary"><summary>Mismatch Assign. cannot set a nonmessage value to a message-based variable. An attempt to assign a nonmessage value to a message-based variable failed. Verify the BPEL source for invalid assign activities.< /summary></part></mismatchedAssignmentFailure></bpelFault>

Send data to JMS queue using CQL in Jdeveloper 11g CEP application

ALTER QUERY q_basic_event ADD DESTINATION
“<EndPointReference><Address>_file:///home/cep/test.txt</Add
ress></EndPointReference>" ---- CQL is being used to transfer data to an output file(test.txt).
How do we change the destination so that the data is sent to a JMS queue in Jdeveloper 11g where we are using a CEP application?

Hi Narayanan,
Thank you for your prompt reply. I understand that we need to create an external delivery channel to post the message to a JMS Queue from TP2. Currently I am using default AQ's (b2b.IP_IN_QUEUE & b2b.IP_OUT_QUEUE) at TP2 end to receive the message.
But, I want to post the message to JMS Queue. For this I need to create an external delivery channel and the corresponding end point should be the name of that JMS Queue. Is my assumption correct?
I have already gone through the thread that you have mentioned and the pdf as well. But, I am not able to find an option on how & where to create that JMS Queue?
Could you clarify on this?
Regards,
Satya.

Posting message to JMS queue from Proxy in OSB 10.3

I am posting a message to a JMS queue using a business service. Is there a way of getting a response from the business service to retrieve the newly generated JMSMessageID?

I am posting a message to a JMS queue using a business service. Is there a way of getting a response from the business service to retrieve the newly generated JMSMessageID?Yes JMS BS can be configured to get Response though from Different Q.
Request-JMSBS----->JMS Request Q------your logic outside of BS----->JMS Response Q----->JMSBS-Response. You can use JMSCorrelationID or JMSMessageID for the response correlation.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/interopjms/transport.html#wp1097863
Cheers
Manoj

How to read the messages in the JMS Queue using JMX

Hi,
          I want to read messages in the JMS queue using JMX. I was able to read using QueueBrowser but want to modify priority of the messages using JMX.
          I tried to use JMSDestinationRuntimeMBean but it does not allow us to read messages unless we pass the message Id. Is there any way that I can get all the messages in the queue.
          I am using Weblogic 8.1 SP4
          Can someone please help me in this regard.
          Thanks,
          Kiran.
          Edited by KGudipati at 10/22/2007 1:22 AM

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

Read message synchronously from JMS queue using OSB

Hi,
Is it possible to read message from the JMS queue using OSB based on the request invocation. I know messages can be read from the queue but it will be polling based.
The requirement is to have an OSB proxy service (HTTP service ) an an interface to the client application. Client application invokes the proxy service and the proxy service need to read message from the JMS queue and provide the message as response to the client.
Let me know if there are any pointers.
Thanks
Sandeep

Hi,
I spent some time trying to do this and apart from creating custom database tables etc. I was not able to achieve this.
We wanted to use in memory JMS queues in our situation.
In the end we developed a Java Web Service which preformed the on-demand read from the queue (using a particular message selector)
This is working for us without a problem
Robert

I want to use ODI to read XML messages from JMS queue and then process it..

I want to use oracle ODI (Oracle Data Integrator) to read XML messages from JMS queue and then process it.. i also want to process and validate the data in it....
Could anyone please tell me the steps to achieve the same. I tried some ways which i got on OTN, but not able to implement it exactly...
As i m very new to ODI, it will be great if you provide detailed steps..
Thanks in advance for your help....

Hi,
Were you able to do it? We are facing this same issue now and, despite the fact the docs say otherwise, it does not seem to be a trivial task.
TIA,
Tedi

How can I send and receive a message from a queue using standalone program

Hi,
I want to write a standalone Java program which has to post a message to a queue and receive a message from a queue thats specified as a replyto queue.I want to have my application to be completely standalone without the need of a Application server.What all the Jars do I need to include in the application.My aim is to have the application standalone and portable so that the application runs on any machine that has a JRE.
Thanks in advance,
Prathima

Hi,
You can get quite simple standalone MQ Java programs from this site http://www.capitalware.biz/mq_code_java.html.
Also regarding the jars required for your application depends on the API being used. If you use MQI API few jars are required and if you decide to use JMS API you'll require few other jars. But you got to either install Websphere MQ Java Client, which will copy the jars to the respective location, or you can choose to copy the jars from some other machine manually.
Eventually, all the jars related to MQI and JMS API will reside under /usr/mqm/java/lib/ or /var/mqm/java/lib/ UNIX Environment. And in case of WINTEL, you should find the jars under C:\Program Files\IBM\WebSphere MQ\Java\lib.
Trust it clarifies...
Naren

Error while sending the messages to JMS Queue

Hi ,
I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
Plz find below the error trace getting.
[Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
     at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
     at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
     at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
     at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
     at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
     at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
     at java.lang.Thread.run(Thread.java:662)
Please guide me in this regard..
Thanks,
sukumar

What have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1)

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

Publishing message to JMS Queue on Weblogic from OSB proxy service

Hi,
1. I have created a JMS module: testModule and a JMS queue: testQueue in the weblogic admin console.
2. Created a business service with the above queue as endpoint.
3. Created a proxy service which publishes the message to the queue using the business service. I have used Publish activity to publish the message to the business service.
When i run the proxy service with the request message, then, no error is coming but, in the admin console when i click on JMS module->testModule->testQueue->Monitoring tab, i see nothing. There are no entries in the table so, how can i check if the message is properly published to the queue or not.
The queue is not listened by any service for consuming the messages.
Kindly help me in figuring out this issue.
Thanks in advance.

If the destination was a topic, the behavior would be expected. Messages only stays on a topic and are delivered to consumers if there are consumers or durable subscribers.
Did you check the server logs and see if there are any exceptions or warnings?
You can also turn on jms debugging by adding the following to your server startup script.
-Dweblogic.debug.DebugJMSFrontEnd=true
-Dweblogic.debug.DebugJMSBackEnd=true
The debugging messages wiill show up in the server log.

QueueBrowser not scaning all messages in JMS queue (ie not showing inprogre

Hi all,
I am using JMS in jboss-3.2.3, when scaning for pending messages i am using QueueBrowser.
But QueueBrowser not scaning all messages in JMS queue (ie not showing inprogress message)
But i need to know all messages including ongoing messages..
Antone plz help me
I am using Queuesender and QueueReceiver ..But some Exception or Error causes my JMS server(QueueReceiver listening for onMessage()) hanged up..and not responding to remaining messages...So i need to find pending messags in JMS queue..How can find?
Now i am using QueueBrowser to get list of pending msgs in queue... But doesn't contains Message which passed for processing (called onMessage())
.. But i need to find this also..How can?
Thanks,
Thilsen

You're right in thinking that the behaviour you describe looks wrong.
Take a look at the QueueBrowser interface which can be used to inspect a queue. You get one using QueueSession.createBrowser(Queue). The QueueBrowser allows you to scan a queue without consuming the messages. However note that the state of the queue may change while you're observing it through the QueueBrowser so what you see might not always be a 100% accurate representation of the queue at any given time.
Other things to check:
- message selectors - are you setting a message selector on your queue receiver which is resulting in not all of the messages 'matching'.
- expired messages - are you setting a time-to-live on the messages that you publish.
Hope this helps,
David Ingham
http://www.arjuna.com

Posting a message to JMS queue using B2B

Similar Messages

Maybe you are looking for