Error #2035 i'm at a loss. Ready to give up.

So i bought a template from Flashmint.com, then made some changes, and went to go test it out..went to the URL and the first thing I'm hit with is the loading bar, and "error #2035" figured it was something small, contacted tech support of the template. Thinking it was a template issue, having them slowly help me figure it out, i got partly the template working.
I soon got it so it can load the whole thing, but I was getting another error loading some media files..Started with a #3xxx can't remember exactly.
The template works PERFECTLY fine in Internet Explore, and i have had a few friends test it out in chrome. In Fire Fox is where I'm having the issue, it will load one time, and then not the next time.
I'm beginning to think its my host, but that techsupport is saying its something with the flash, however, i uploaded it on a free host and the template works perfectly fine in firefox on the host.
This is the one that doesnt work in fire fox:
http://esfvisions.com/test/
OR
http://esfvisions.com/test2/
the one that DOES work in FireFox:
http://evanfphotos.x10.mx/Flash_website/
They all work 100% fine in Internet Explore, and Chrome. I'm having the issues in FireFox.
Just for the record, my website is hosted on Debia. From Fatcow.com
Message was edited by: 06fg2 - I have re-installed firefox, and it worked for some time. I have also deleted Cookies, and Cache. Works, then it goes back to the same thing.

I tired what you suggest..This is all i'm getting.
http://esfvisions.com/test2/ the same error, but it just loads off to the side. No other error suggestions or anything.
The steps all i did was: open Flash -> open main.fla -> File -> publish settings -> flash -> permit debugging -> publish -> re-upload -> and thats that. I changed main.html to index.html since i'm assuming thats what needed to be done.

Similar Messages

C4440 scan error Operation could not be completed (error 0x00000015). The device is not ready.

I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
When scanning I receive the following message:
Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
Please help!!

Hello, nylamama:
Follow the steps in this document, and you should find the help you need to resolve the error.
Let me know if this helps, and thank you for contacting HP!
Cheers,
SN_63 (Saint Nana): I work on behalf of HP.
Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

Scanner Operation could not be completed (error 0x00000015). The device is not ready.

When trying to scan I keep receiving an error message. Operation could not be completed (error 0x00000015). The device is not ready.
What does this mean? I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
Printer : HP PhotoSmart 2710
Computer: HP Pavilion zd8000 (originally XP)

Welcome to the Forum, losblanco,
I checked on this for you and I think your answer is here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
If you don't find the solution there,
or if you need help for any other reason,
please come back and we'll take another shot at it!
Good Luck!
I hope this helps.
Click The Kudos Star to say Thanks!
Set in Reply “Accept as Solution” if it’s fixed!
Kudos are Earned!
Kind Regards,
Dragon-Fur

Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.

I get this error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
Here is my code:
import fl.transitions.*;
import fl.transitions.easing.*;
//Assign CLICK listeners for each menu button
Home.addEventListener (MouseEvent.CLICK, buttonClicked);
Big_Square_Baling.addEventListener (MouseEvent.CLICK, buttonClicked);
Wrapping.addEventListener (MouseEvent.CLICK, buttonClicked);
Chopping.addEventListener (MouseEvent.CLICK, buttonClicked);
Tillage.addEventListener (MouseEvent.CLICK, buttonClicked);
Raking.addEventListener (MouseEvent.CLICK, buttonClicked);
//Make the buttons look like buttons
Home.buttonMode = true;
Big_Square_Baling.buttonMode = true;
Wrapping.buttonMode = true;
Chopping.buttonMode = true;
Tillage.buttonMode = true;
Raking.buttonMode = true;
//This loader is used to load the external swf files
var loader:Loader;
//URLRequest stores the path to the file to be loaded
var urlRequest:URLRequest;
//This array holds all the tweens, so they
//don't get garbage collected
var tweens:Array = new Array();
//Stores the current page we are displaying
var currentPage:MovieClip = null;
//Stores the next page that we are going to display
var nextPage:MovieClip = null;
//This function is called when a menu button is clicked
function buttonClicked (e:Event):void {
//Create a new loader instance
loader = new Loader();
//If we clicked the first button, we load the the Home page
if (e.target == Home) {
urlRequest = new URLRequest("Home.swf");
loader.load (urlRequest);
//If we clicked the second button, we load the Big Square Baling page
else if (e.target == Big_Square_Baling) {
urlRequest = new URLRequest("Big_Square_Baling.swf");
loader.load (urlRequest);
//We load the Big Square Bale Wrapping page since we know that the home page or the Big Square Baling page
//is not clicked
else if (e.target == Wrapping) {
urlRequest = new URLRequest("Wrapping.swf");
loader.load (urlRequest);
//We load the Chopping page since we know that the home page, the Big Square Baling page, or the
//Big Square Bale Wrapping page is not clicked
else if (e.target == Chopping) {
urlRequest = new URLRequest("Chopping.swf");
loader.load (urlRequest);
//We load the Tillage page since we know that that the home page, the Big Square Baling page, the
//Big Square Bale Wrapping page, and the Chopping page is not clicked
else if (e.target == Tillage) {
urlRequest = new URLRequest("Tillage.swf");
loader.load (urlRequest);
//We load the Raking page since we know that the home page, the Big Square Baling page, the
//Big Square Bale Wrapping page the Chopping page, and the Tillage page is not clicked
else {
urlRequest = new URLRequest("Raking.swf");
loader.load (urlRequest);
//We want to know when the next page is finished loading
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, fileLoaded);
//This function is called, when we have finished loading a content page
function fileLoaded(e:Event):void {
//The loader contains the page we are going to display.
nextPage = e.target.content;
//Let's animate the current page away from the stage.
//First, we need to make sure there is a current page on the stage.
if(currentPage != null) {
//Tween the current page from left to the right
var tweenX:Tween = new Tween(currentPage, "x", Regular.easeOut,
      currentPage.x, 500, 1, true);
//Decrease the alpha to zero
var tweenAlpha:Tween = new Tween(currentPage, "alpha", Regular.easeOut,
      1, 0, 1, true);
//Push the tweens into an array
tweens.push(tweenX);
tweens.push(tweenAlpha);
//currentPageGone will be called when the tween is finished
tweenX.addEventListener(TweenEvent.MOTION_FINISH, currentPageGone);
//There is no current page, so we can animate the next
//page to the stage. The animation is done in
//the showNextPage function.
else {
showNextPage();
//This function animates and displayes the next page
function showNextPage():void {
//Tween the next page from left to the center
var tweenX:Tween = new Tween(nextPage, "x", Regular.easeOut,
      -200, 0, 1, true);
//Tween the alpha to from 0 to 1
var tweenAlpha:Tween = new Tween(nextPage, "alpha", Regular.easeOut,
      0, 1, 1, true);
//Push the tweens into an array
tweens.push(tweenX);
tweens.push(tweenAlpha);
//Add the next page to the stage
addChild(nextPage);
//Next page is now our current page
currentPage = nextPage;
//This function is called when the current page has been animated away
function currentPageGone(e:Event):void {
//Remove the current page completely
removeChild(currentPage);
//Let's show the next page
showNextPage();

To help figure out what's wrong, you can use an absolute path to your SWF files. (Such as "C:/Program Files/My Project/MySWF.swf") If the error goes away, then the filename is correct and there is simply some confusion as to where the local path is. Remember that the parent project (your main.swf) should be in the exact same directory as the SWFs being loaded)
~Plystire

Error #2035 please help me

hello,
i searched on google but i didn't find any solutions
sorry for my english, i am french
My code is :
var myLoader:Loader = new Loader()
var imgURL:URLRequest = new URLRequest("image1.jpg")
myLoader.load(imgURL)
addChild(myLoader)
but i have an error : Error #2044: IOErrorEvent Unhandled :
text=Error #2035: L'URL not found
I really don't understand the probleme because my image path
is good!!
Please Help Me
Thanks

Hey Tazzy77290,
Your image and your swf probably arn't in the same folder.
Otherwise that link would load your image.
If you're sure they are, then make sure the file is image.jpg
and not image.JPG,
because that would mess it up too.
Hope that helps!
John

Help with this ! Error #2044: Unhandled ioError:. text=Error #2035:

Okay,
I'm green and new to Flash and making a website so this may not be a huge issue to some.
I'm trying to make a simple image gallery with the UI Loader.( 9 thumbnail images with main image above it)
I'm following a Lynda.com CS3 video tutorial if that helps. It seems straightforward enough.
I have everything properly assigned (buttons, the loader) and this is the basic actionscript code to get the first two images to appear:
btn1.addEventListener(MouseEvent.CLICK, ldr1)
function ldr1(e:Event){
ldr.source = "Images01.jpg";
btn2.addEventListener(MouseEvent.CLICK,ldr2)
function ldr2(e:Event){
ldr.source = "Images02.jpg";
When I test the movie I get this error :
Error #2044: Unhandled ioError:. text=Error #2035: URL Not Found.
I have the flash file and the swf file saved in the same folder as the images (as the video instructs) but it seems Flash cannot read or find my external hard drive. I also remade the file and resaved everything on my computers main hard drive and it still cannot find my folder.
Please help. I know this is probably an easy issue but again, I'm new and any help would be great.
Thanks,
Mike

I'm not familiar with the way you're loading images (what class is "ldr" an instance of?), but the error is straightforward. You somehow misspelled the image name (caps, maybe in the extension?) or you're referring to a folder that doesn't contain that image.
I usually debug these kind of errors with Tamper Data, an addon for Firefox. Run it, then run your sfw (in a browser) and see what the location is of the called images. That should give you an idea on what's going wrong.
Oh and btw, e is not an Event but a MouseEvent. Though I don't think that produced the error in this case.

Pc bringt beim start fehlermeldung: no disk or disk error replace and strik any key when ready.

Beim Start meines hp compaq dc7100usd mit XP Professionel kommt folgende Fehlermeldung: no disk or disk error replace and strik any key when ready. Auch ein Start im abgesicherten Modus ist nicht möglich.
DasProblem trat auf nachdem der PC beim Bearbeiten einer Powerpoint präsentation abgestürtzt ist und die Stromzufuhr unterbrochen wurde.
Eine Startdisk besitzt ich nicht.

Hallo:
Setzen Sie das CMOS.
Finden Sie unter Problembehandlung Handbuch auf unten stehenden Link, Seiten B-3 und B-4.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00189283/c00189283.pdf
Wenn das nicht funktioniert, musst du sehen, ob Sie noch bestellen-Startdisketten für Ihren PC.
HP unter dieser Telefonnummer anrufen: + 49 (0) 69-6680-5551
Sie müssen die Modellnummer und die Seriennummer zu bieten.
Paul
Hi:
Try resetting the CMOS.
See the troubleshooting manual at the link below, pages B-3 and B-4.
If that doesn't work, you will need to see if you can still order recovery disks for your PC.
Call HP at this phone number: +49 (0) 69 6680 5551
You will need to provide the model number and serial number.
Paul

I am ready to give up on the Iphone RE: emails

I have a few more days left in my return window, and I am seriously considering it. I wasn't able to send emails, but receive them, so I took the iphone back to AT&T and he redid my settings, tested it while I was there and was able to get the phone to send an email. I emailed a test email to my friend and almost immediately got a response from her that she had received it. I was able to reply with no problem. Now, a couple of hours later, I am at home and I can't get it to send an email. It seems to get hung up on sending it and takes forever for it to finally give me an error message which usually says something to the effect of a failed server or something. I have wanted this phone for so long and want to love it, but honestly, I am ready to give up on it and get something else. Can anyone help me figure out what I am doing wrong????
Heather

Ok, that CWMX.COM bit is proof now to me it is because BellSouth blocks you from sending unless on their network. that is a free server (workaround) to send. It is needed when on Edge. But now that you are home and on WiFi (which is a prefered connection as it is MUCH faster) now while on WiFi, you ARE on their network and they don't like you using the free server. You need to have it set to what your network (ISP) wants (which is what you computer has setup on it if you look at those settings, odds are same as incoming).
So here is the issue you have.
The guy set it up that you can send email anytime you are on Edge (which will be when you are not home on your WiFi network).
When at home, you cannot send email while on wifi unless you temp. turn off WiFi (where you just said you saw where). If you turn it off, you can send. Then you can turn WiFi back on to get fast speed with internet again.
So all in all not too bad. When not at home, you can send. When at home...well you have your computer for email....but if you need to send via phone, you have to turn off wifi.
Once again, this is BellSouth stopping you not the iPhone. You may consider getting a free email account elsewhere (gmail for example) and telling all your friends to email you there from now on and just use bellsouth for junk mail, shopping, etc.

Absolutely Stumped and Ready to Give Up

Hi all...
I've been searching and searching through the forums and the help articles to find out how to fix this problem, and I absolutely cannot figure it out. It makes no sense to me.
I cannot get the binding navigator to save changes to the database. I've created a new project, tried on different computers and still does not work no matter what I do.
Here's what I've done so far. I've added a new form to my project, completely blank and new. I've taken a Table from an SQL database and dragged it from the Data Sources Window onto the form, just like I should do. As usual, the bindingnavigator, bindingsource,
tableadapter all show up. When I check to see what is in the SAVE button, the following code is present, which all seems fine to me:
Me.Validate()
Me.Table2BindingSource.EndEdit()Me.TableAdapterManager.UpdateAll(Me.Database1_Data_Set)
When I run it, I can of course add rows, delete rows, change data in rows with the binding navigator, but anything I do does not show up in the database after having clicked the save button.
I've checked to see if the binding source is recognizing that there is changes to be made (.haschanges) and it indeed knows that there's changes to made. I've verified this a couple ways, one way is by doing this:
MsgBox("hi")
Me.Validate()
MsgBox(Me.Database1_Data_Set.HasChanges)
Me.Table2BindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.Database1_Data_Set)
MsgBox(Me.Database1_Data_Set.HasChanges)
The first messagebox I used to make sure that the clicking on the save button was actually fired. Indeed it is. I have it messagebox me before the .updateall and after...which comes up as it should, which is haschanges=true before the update and haschanges=false
after the update. I have even tried adding the acceptchanges command after updating all. None of this works. It never saves to the database. I've trapped the code in a TRY and catch with a messagebox if there are any errors, and no errors come up.
I've tried the infamous changing of the .xsd and .mdf property CopytoOutputDirectory to if newer and even tried do not copy, and none of these fix the problem, it still persists on not saving to the database. The database I am using is a very simple database,
literally one column with generic words like 'red' 'blue' green' frank', etc. I made it simple on purpose so I could see if it was a table issue, but still no saving to database.
This is a local database. I'm completely stumped and ready to give up. No matter what I do, it does not work. I need help on this if you're willing.
One thing I have noticed is that after I click the save button, if I then close the form but stay in runtime, then re-open the form, the data that I changed is still showing on the binding navigator. I also put a button on the form and had it refill the
data to see and when I click it, the data on the binding navigator reflects the changes I made.. HOWEVER, as soon as I end the program, hit stop on the build and then re-play it, go into the the form the data is back to where it was from the start, and nothing
is changed. So it seems like it is showing the changes during run-time, but never actually updating the root database file, and when it's shut down it loses all the changes that it shows (not that it matters, because it's not even updating the database).
The database and its table have no special settings, just a plain old database created through the wizard, and one column of simple data of about 5 rows or so.
Can anyone help at all? If I can't save changes to the database, then it's over.
BTW i'm using Visual Studio 2013.

Thanks both for your replies. I really appreciate your help. I'm not sure what you mean by keeping SQL studio manager open, make change in the physical database then refresh in server manager...I messed around and tried to figure that out, but I don't think
I was even in the right place (SQL server object explorer?)...
The tool I use to see if the database is updated, is by viewing the data in the SERVER EXPLORER. I hit refresh first then right click the table and choose show data.
I ran this code on a button press:
Dim sqlConnection1 As New System.Data.SqlClient.SqlConnection("Data Source=(LocalDB)\v11.0;AttachDbFilename=C:\Users\STyler\Desktop\vs10\Database1.mdf;Integrated Security=True")
Dim cmd As New System.Data.SqlClient.SqlCommand
cmd.CommandType = System.Data.CommandType.Text
cmd.CommandText = "UPDATE Table2 SET [Depth] = @Depth WHERE [ID] = 2"
cmd.Parameters.AddWithValue("@Depth", "gfakjld")
cmd.Connection = sqlConnection1
sqlConnection1.Open()
cmd.ExecuteNonQuery()
sqlConnection1.Close()
...and the change was made in the database. It's just not updating through the binding navigator.
Can you further explain how I would go about using your suggestion about:
If the database is SQL-Server then keep SQL Studio Manager open, make a change in the physical (thinking not on the server) database then refresh in SQL-Server Manager?
Thanks both...

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

It takes an enormous amount of patience and time to get through to a qualified person.
My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
You may be interested in my journey to a very good technical support person.
First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.

I want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

Hi
i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

Hello there ypda75,
I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899.
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
All the very best,
Sterling

Ready to give up

I am truly ready to give up on Photoshop Elements. I just purchased version 10 and had problems from the beginning. I asked several questions about why all my photos will not appear in my folders in Folder View in Organizer. I have followed all instructions I could find, but Organizer just spins and spins and takes forever to show anything, And then it only shows partial contents out of order or now, nothing in any folder at all. If I tell it to import again, it tells me the photos are already in the catalog. I have uninstalled PSE completely, removing ALL folders which were missed in the uninstall. I have done this twice. Also, I told it I did not want to back up/sync online and discovered it had already backed up 1.6g. I could not find how to access this online backup to clear it. So, before I jump up and down on the disks, any help or link to real-time help would be appreciated. Thanks for listening to me vent, but after 5 days of struggling I am desperate!

The folder location view shows all the images of the folder selected in tree hierarchy. So if you want to see all the images present in catalog you need to switch to thumbnail view or import batch view. You can access your online backup by signing to photoshop.com with credentials. On Photoshop.com, under libraries you will find all your backed up data.

Errors in LabVIEW because Max is not ready

I'm having an unusual problem with Max and LabVIEW.
I need to have a LabVIEW program launch auotmatically on startup and run unattended. I put a shortcut in the Startup folder, use automatic logon, and generally things work. However, I have had some issues doing this with 8186 and 8187 PXI controllers. The 8186 was running WXP. When it started up and launched my program, often times LabVIEW could not talk to various NI hardware in the PXI chassis. I would get errors doing D/A, A/D, DIO, reading Max settings, whatever. If I quit the program, exit LabVIEW, then launch the program again without rebooting, everything usually works.
The 8187 is similar, but the problems aren't as severe. Most of the time, the program works right away when it boots up and runs. However, once in a while, the digital output doesn't work. It doesn't return an error, but the DO bits don't work. It's as if the DIO mapping is wrong, and it's setting a different DIO port or something. If I quit LabVIEW and restart it, it is fine. So I'm guessing that it has to do with MAX. I believe LV reads the Max database when it launches. If Max isn't ready or something goes wrong, it won't work until LabVIEW is restarted and rereads Max. I'm using traditional Daq, by the way. Also, I'm configuring the DO channels in LabVIEW, not in Max, so all that Max should be doing for the DO is registering which Device is which.
I' playing with putting a delay in the startup before launching LabVIEW. That seems to help. A 10 second delay reduced the chance of the DO error somewhat. So far, a 20 second delay seems to have eliminated the error. But that is a poor kludge.
Summary: PXI-8187, PXI E-series multifunction card, LV 7.1, Max 3.1, Traditional NI-Daq, W2K, DO. Has anyone seen a situation wherein Max does not appear to be ready by the time LabVIEW has launched and started? If so, is there a fix? Has anyone seen a situation wherein Max does not appear to be ready by the time LabVIEW has launched and started? If so, is there a fix?
Thanks,
Dave
David Thomson Original Code Consulting
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Architect
There are 10 kinds of people: those who understand binary, and those who don't.

Nick,
Thanks for the idea. I had considered trying this, but haven't gotten around to it yet. I've done this before with other systems. The reason I did it then is that it loads faster. In this case, I was going to try it just because it was something different, but I wasn't expecting much. In fact, loading the LV software faster would, according to my current theory, just make things worse. It seems that the LV program is starting before the low-level drivers are really ready. So how would making the LV program (in .exe form) load faster help?
David Thomson Original Code Consulting
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Architect
There are 10 kinds of people: those who understand binary, and those who don't.

FR query ready export gives error

Hi
We are exporting a FR report in Query ready mode to Excel but its giving javascript error as Permission Denied.
Any idea.
Thanks

You could check this IE settings :
1. From the Tools menu, click Internet Options.
2. Click Advanced.
A. Scroll to "Disable script debugging". Check the option.
B. Scroll to "Display a notification about every script error". Un-check the option.
3. Click the Security tab.
4. Click Internet, and then click Custom Level.
5. In the Security Settings list, scroll to Miscellaneous.
6. Set "Access data sources across domains" to "Enable" or "Prompt".
Thanks...

Error #2035 i'm at a loss. Ready to give up.

Similar Messages

Maybe you are looking for