Error message in BAPI call

I have imported RFC Interfaces from SAP system. Each interfaces doesn't  have fault message.
How to get error message in BAPI call when error occurs?
I can catch an exception in BPM but I need to get error message and send it to another system.

Hi Denis,
>>>I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
if you want to use fault messages
consider using ABAP Proxies
>>>>How to get error message in BAPI call when error occurs?
most bapis have return table in which they
return error messages (you can do it either
in a sync way or in an async way if the call is too long - with corrlelation of course)
Regards,
michal

Similar Messages

  • Passing Error message to BAPI Structure in RFC

    Hi Experts,
    I would like to know how we pass error message to BAPI structurre in RFC?
    Plz some one give the details about how we handle the errors.
    Thanks in advance.

    Like already mentioned before, every Standard SAP BAPI, has an export or tables parameter which is called something like RETURN with structure BAPIRET2. In here, you can store all the messages that are generated during the BAPI Call.
    However, if you also want to catch errors like system exceptions and communication errors, you will have to add these exceptions manually:
    EXCEPTIONS
         SYSTEM_FAILURE        = 1 MESSAGE RFC_MESS
         COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
    However, not sure if this addition works when calling BAPI from NON-sap application.
    Declaration:
    DATA: RFC_MESS(128).

  • Error message when I calling planning layout in the STS

    Dear
    I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10,  BW 3.5 SP14 ).
    But I got some error messages when I calling planning layout in the STS screen..
    I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.  
    I did
    1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
    2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
    3. Customizing STS
        - Create Sub Plan & Session
        - Asssign Hierarchy to Sub Plan
        - Determine attribute for created planning session ( Bottom-up, Auto mail )
        - Define Header characteristics for planning session to contains the planning package completely.
        - Determine Date, Person Responsible and Layout.
    4. Send Start mail
    5. Open STS Web Start Screen ( using B Unit responsible user .) 
    When he click "Open Planning" icon in the screen the following error messages were happened...
    I've no idea for that because I didn't use any variables or offset settings.        
    I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
    but I could not use lock processing in the STS.
    Could you tell me what's happening to me?
      [ Following error message ]
    Correct the data on variables and offset in character string "? 
    Message Number  UPC_FW092 
    Long Text  Diagnosis
    Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
    Procedure
    Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
    <VARIABLE_NAME> [{ + | - } OFFSET]
    Examples:
    VAR0
    VAR1+1
    VAR2 - 2.
    Also check whether the variable, that you want to use is available in the planning area.

    Hello,
    this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
    It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
    Regards
    Marc
    SAP NetWeaver RIG

  • Error messages for BAPI

    Hello,
    Is there any way to get list of all possible error messages in BAPI for BAPI_PO_CREATE1 and BAPI_SAG_CREATE?
    I need to prepare check list of all possible error messages BAPI can return while creating PO and Schedulling agreement using BAPI.
    Thanks in advance.
    Madhura

    Try checking the message class used inside BAPI_PO_Create and all the messages in ME21n .
    Then you will need to go to this message class and find out al the messages.
    But this can go for a long list from 'error for valid vendor numbers, materials , and all the fields etc
    Mathews

  • Error Message in BAPI ... 'BAPI_ACC_INVOICE_RECEIPT_POST'

    Hello,
    I recently used a BAPI called 'BAPI_ACC_INVOICE_RECEIPT_POST'. However an error message appeared in my return table stating "No currency line exists for line item ....".
    Is there a way to resolve this?
    Thank you all and good day.

    hi Chad,
    the BAPI has four important tables parameters:
    ACCOUNTPAYABLE
    ACCOUNTGL
    ACCOUNTTAX
    CURRENCYAMOUNT
    In CURRENCYAMOUNT there should be a corresponding line for each lines in the first three tables.
    hope this helps
    ec

  • Handling error messages in BAPI

    Hello,
       I am doing a replica of an SAP R3 std report in portal. I've converted the report pgm to a BAPI. My question is how to populate the BAPIRETURN table with the error messages raised from a std report? I mean how to capture these error messages? I am doing a SUBMIT to call this report from within the BAPI.
    Thanks in advance.
    Rgds,
    Nathan.

    Hi,
      Collect all the errors in an internal table..Lets say ITAB.
      At the end of the program export it to the memory.
      EXPORT T_ERRORS TO MEMORY ID 'BAPI_CALL'.
    In the Bapi after the program is completed..use the import statement to get it from the memory...
      SUBMIT 'ZREPORT' AND RETURN.
      IMPORT T_ERRORS FROM MEMORY ID 'BAPI_CALL'.
      Then pass the errors to the return parameter of the BAPI..
    Thanks,
    Naren

  • Suppress the Information message during BAPI Call

    Hi, I am getting the information message pop up during the BAPI Call "BAPI_BUS2054_CREATE_MULTI". Is there any possiblity to suppress the message?

    Hi,
    use call function with destination. Here is a short example:
    REPORT  zhabitest.
    DATA:
      et_return LIKE bapiret2 OCCURS 0.
      CALL FUNCTION 'ZTEST'
        DESTINATION 'NONE'
        TABLES
          et_return = et_return.
    DATA:
      ele_return LIKE bapiret2,
      rc LIKE sy-subrc.
    CLEAR rc.
    LOOP AT et_return INTO ele_return.
      IF ( ele_return-type = 'E' )     "error
         OR ( ele_return-type = 'A' ). "abort
        rc = 8.
        EXIT.
      ENDIF.
    ENDLOOP.
    IF rc IS INITIAL.
      WRITE: / 'Call OK'.
    ELSE.
      WRITE: / 'Call error'.
    ENDIF.
    And the function is here:
    FUNCTION ztest.
    *"*"Lokale Schnittstelle:
    *"  TABLES
    *"      ET_RETURN STRUCTURE  BAPIRET2 OPTIONAL
      MESSAGE i208(00) WITH 'Separate I/O and processing!'.
      GET TIME.
      DATA:
        ele_return TYPE bapiret2.
    * return error randomly
      IF sy-uzeit+5(1) CA '13579'.
        ele_return-type = 'E'.
        APPEND ele_return TO et_return.
      ENDIF.
    ENDFUNCTION.
    Pay attention to the documentation of call with destination (db commit).
    Regards
    Walter Habich

  • Error message invoked by Call

    Hi,
    I am trying to use the Call statement to invoke a function that displays information in a popup window. How can I avoid getting the error message
    'GuiXT Call RFC Error' with the description 'Screen output without connection to user'?
    Thanks,
    Rathul.

    Hi,
    Put a statement
    Call Function "SYSTEM_ATTACH_GUI".
    into your function module. This, by the way, also enables normal ABAP debugging of the called function (via a BREAK-POINT).
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • Getting error message Thru BAPI: BAPI_INCOMINGINVOICE_CREATE

    Hi All,
    Could anyone please investigate into this error and give me the possible answer.
    We're using ECC 6.0
    Getting error while doing Invoice Posting thru BAPI/Function Module: BAPI_INCOMINGINVOICE_CREATE
    Error Messages
    1. M8 376: Enter goods receipt data only when working with GR-based IV
    2. M8 375: Fill in mandatory field REF_DOC, REF_DOC_YEAR, REF_DOC_IT (table parameter ITEMDATA, row 000001)
    These above 1 & 2 been rectified by putting the GR/GI Slip No. of GR
    But still the 3rd error is facing it now
    3. M8 429: Enter a reference to a valid goods receipt (line 000001)
    FYI
    My PO: 4500017248 is having a Status/Control of GR, IR, GR-Based IV
    PO 1 Line- Qty: 10, Net Order Price: 10
    GR: 5000012041 for 1 Line- Qty: 10, Net Order Price: 10, Total: 100
    Regards
    Dinakar
    Edited by: Dinakar Nallavelli on Jan 19, 2009 1:17 PM
    Edited by: Dinakar Nallavelli on Jan 19, 2009 1:23 PM
    Self solved this issue by putting the REF_DOC as GR related- MIGO Doc number and the Year of the document and the line item in it
    No Reply required further for this issue
    Edited by: Dinakar Nallavelli on Jan 19, 2009 2:27 PM

    How did you resolve it?

  • Error message for BAPI BAPI_POEC_CREATE

    Hi All,
    I am using this function module BAPI_POEC_CREATE to create purchase order in srm system.
    I have executed this bapi i am getting below error messages...
    I   BBP_PD               184 Purchase order 0000000068-  has been created
    E  BBP_UI_PO            045 Output: No details for medium Printer in supplier master record
    E  BS                   013 System status INCM is active (Purchase Order 68)
    I am not able to see the PO 68 which is created above in SRM system.Neighter it is shown in BBP_PD.
    also it is asking for output details for supplier. I have maintained in Maintain bussiness partner the output medium for the vendor in contact Tab.where else i need to maintain these values.
    also the error message mentioning INCM is active, i am not getting what it means
    Any body worked on this BAPI befor pls. help me.
    Abdul Raheem

    Hi,
    System Status INCM is active implies that your document is "Incomplete". There is an error and hence you cannot validate it, only park it.
    System status prevents you from ordering/submitting/validating the document until you correct the error.
    So could you please check the error message in RZ20?
    Regards,
    Nikhil

  • Getting error message when i call newly created method from existing wcf service( System.ServiceModel.ActionNotSupportedException)

    I have existing wcf service which is working fine. I have created new operational method in the one of the servicecontract and I ref that dll into my client and calling that new operational method. when I call the new operational method, I am getting the
    following error message.  old operational method is working fine when I call that.
    Since my service is already there. all the binding information is present already in the config file of service and client. I didn't touch the config file since I just added new method into the servicecontract.
    I am using Tcp connection.
    Please help me regarding this.
    Error :
    {System.ServiceModel.ActionNotSupportedException: The message with Action 'http://tempuri.org/IAccountDetailService/Test' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract
    mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver.  Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport,
    None).
    Server stack trace:
       at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
       at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at SATT.ServiceContract.IAccountDetailService.Test()
       at SATT.Web.ServiceAgent.AccountDetails.Test() in d:\Gowsiya\Project\SATT\Dev\Src\SATT\SATT.Web\ServiceAgent\AccountDetails.cs:line 31
       at SATT.Web.Controllers.AccountDetailsController.GetPipelineDetails(Int64 mstpid, String pageNumber, String pageSize, String orderColumn, String orderType, DateTime timePeriod) in d:\Gowsiya\Project\SATT\Dev\Src\SATT\SATT.Web\Controllers\AccountDetailsController.cs:line
    57
       at lambda_method(Closure , ControllerBase , Object[] )
       at System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters)
       at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters)
       at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters)
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41()
       at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _)
       at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.End()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult)
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
       at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()}

    Hi Gowsiya,
    Maybe the WCF forum would be better for this issue, you know that this forum is to discuss the VS IDE.
    WCF forum link:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wcf
    Thanks for your understanding.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error message "SiteFile.getCRC called with no text or binary content" when trying to publish site to Business Catalyst

    I'm trying to publish my site to business catalyst, but keep getting a pop-up message and muse shuts down. The error message says "SiteFile.getCRC called with no text or binary content".
    No issues before, but I made a few font changes and now I won't upload. I've updated Air and uninstalled/reinstalled Muse. Not sure what the issue or where to start.
    Thanks for the help!

    Could you please share your .muse file with us to investigate? Please email it to [email protected] If your file is greater than 20MB you can use something like Adobe SendNow or SendThisFile or Dropbox. Please do not forget to mention the link to this forum thread in your e-mail so that we can identify the file.

  • Suppress an error message from BAPI

    Dear all,
    One of the BAPIs we are using issues messages like type I or E during background processing.
    I want these messages suppressed. I heard this can be customized in some where.
    Does anybody know how to do it?
    Regards,
    Kazuya

    HI
    GOOD
    GO THROUGH THE FOLLOWING LINKS,I HOPE THIS WILL HELP YOU TO SOLVE YOUR PROBLEM.
    http://www.realtech.com/wDeutsch/software/application_manager/Applications/SAP/APO_DC_WP_EN.pdf
    THANKS
    MRUTYUN

  • Error handling in bapi

    hi all,
          how to handle errors in bapis,and also can anyone send faqs on bapis.

    Hi
    A BAPI should be able to record and classify all possible errors that may occur a function Module BAPI_MESSAGE_GETDETAIL is used to Handle the Error Messages..
    You have to create a parameter named Return for every BAPI. This parameter returns exception messages or success messages to the calling program.
    BAPIs themselves must not trigger any messages (such as MESSAGE xnnn) in the coding. In particular they must not generate terminations or display dialog boxes. Instead, all messages must be intercepted internally and reported back to the calling program in the Return parameter. Otherwise the BAPI will not be processed correctly and control may not be given back to the calling program.
    All error messages or indeed any message that may be returned by the BAPI, must be defined in message table (Tools ® ABAP Workbench ® Development ® Programming environment ® Messages) and described in the documentation for the return parameter. This also applies to the most important or most likely error messages generated by other programs that can be indirectly passed via the BAPI to the application program.
    You must not use exceptions in BAPI interfaces.
    When a termination message (message type A) is triggered, a database rollback is executed in the standard programming model, that is, all tasks performed since the last COMMIT WORK are canceled. When you program BAPIs, we recommend that you also execute a database rollback in the return parameter for termination messages. You must describe this process in the documentation for the Return parameter. For messages of type E (error), the calling program performs the error handling.
    Application developers are provided with two service BAPIs to diagnose and process error messages from BAPI calls:
    BapiService.MessageGetDetail() displays the short and long texts of BAPI error messages.
    BapiService.ApplicationLogGetDetail(), with which information in application logs can be displayed.
    Features
    The export parameter Return can be implemented as follows:
    As a structure, whereby it must be defined in the function module as an export parameter, as well as in the method in the BOR.
    As a table, whereby it must be defined in the function module as a table parameter, as well as in the method in the BOR as an export parameter.
    Before filling the Return parameter you should either initialize the structure with CLEAR or the table with REFRESH and CLEAR.
    If the return parameter is not set or is set to an initial value this means that no error has occurred.
    The Return parameter may be based on the following reference structures:
    BAPIRET2
    You must use this reference structure when developing new BAPIS.
    BAPIRET1, BAPIRETURN
    These reference structures are still partly used in old BAPIs.
    Both structures must be filled in the logon language.
    Reward if Helpfull,
    Naresh.

  • LR4: error message on import : attempt to call field 'isNSImage' (a nil value)

    I have just installed LR4 on my mac and when I click on import I get the error message -
    : attempt to call field 'isNSImage' (a nil value)
    Can anyone give me any idea what this means or how to rectify it.
    I am new at all this and really don't have a clue
    Thanks

    Forgotten ... Windows 8 64Bit.
    Haven't tried the preferences yet, was thinking about it though. I'll try tonight.
    Thanks so far.

Maybe you are looking for