Suppress an error message from BAPI

Dear all,
One of the BAPIs we are using issues messages like type I or E during background processing.
I want these messages suppressed. I heard this can be customized in some where.
Does anybody know how to do it?
Regards,
Kazuya

HI
GOOD
GO THROUGH THE FOLLOWING LINKS,I HOPE THIS WILL HELP YOU TO SOLVE YOUR PROBLEM.
http://www.realtech.com/wDeutsch/software/application_manager/Applications/SAP/APO_DC_WP_EN.pdf
THANKS
MRUTYUN

Similar Messages

Suppress LT03 Error Messages from VL06P?

Hi
We are running VL06P and create TO in Background. The program runs LT03 to do this. But in some cases we have a material locking error or a system cannot find source storage bin error. I looked for notes to suppress the Error messages, but there are no new ones. Note 391972 is already in our ECC 6 system.
We don't mind the errors, but the problem is that the users print the Groups without always making sure that the TO create was 100% finished. That means they have to complete the TO create process and do a Reprint of the Group outstanding. This is actually the first print for the newly created TOs.
Please tell me how can we suppress the Error Messages? SAP already call the transaction with MODE 'N' and we push a button called Create TO in Background. But now it breaks in foreground/dialog causing big hassles for our users.
Thank you and best regards,
Adrian

In VL06P:
Settings -> Subsequent Functions -> Background
Subsequent Functions -> Create Transfer Order
That stops the error messages, just a pity it doesn't do it with the click of one button.

How ro send error message from BADI to BAPI

i have a BADI which is triggered from a BAPI.This BADI has only importing and changing parameters.How can i send error message to BAPI.Please reply at the earliest.
High points can be expected.

Hi Arshi,
Please check whether the following link is of any use to you,
how to capture the error message from bapi
Best Regards.
Reward points if it is helpful.

How do I suppress error messages from displaying in GPIB calls?

I use GPIB Read and GPIB Write to access instruments on the bus. Both vi's supply status on error out.
I sometimes call these routines in situations where I do NOT want to reap error status, so I leave the error out terminal unconnected.
Here's the problem: I get error popups that display the GPIB errors (when there are some) even though I don't connect the error out terminals to simple error or general error.
How can I suppress the error messages??? I do NOT want them to display...
As always, thanks in advance for the assist!!!

PROBLEM SOLVED.
Thanks gentlemen. But... now I have to defend myself!
1. I have both old non-488.2 and newer 488.2 instruments on the same bus. When I send *IDN? to the old instruments, they generate errors. When I send model-specific (non 488.2) commands to the newer stuff, they sometimes error. I have to 'search' the bus and identify specific instruments (by mfg/model) that I'm looking for; I don't know what address they're at. So I go thru a loop (the index is the GPIB address) and for each address I try the old-style probe; if it fails, the new style; if neither succeeds, no one is home at that address. The problem is that in cases where I try the wrong probe for the device first, it frequent gets 'trapped' in the input buffer of that device causing it to incorrectly respond to its correct probe when I finally get to it. So I have to clear the device before sending it the probe to make sure its listening. Can't use *CLR since many devices don't recognize it; and since I can't send a command (yet) because the device is screwed up. So.... I figured out what I have to do to get the devices listening. The NEAT-3xx controllers are happy *after* they receive a null command with a LF (EOS) character - but they generate errors while processing the digital enema just described. The HP spectrum analyzers I use work fine when they get *IDN?, but generate an error on the bus when they receive the probe designed to get the NEAT controller to respond. So what I do is always send an EOS character first to each address before each probe - and then issue a GPIB read. I ignore the errors generated, and the data returned. Then when I probe, I always get a good response (if the probe type matches the device!) instead of an artifact from the garbage the instrument had to listen to. It's like drinking a beer after your wife calls you and nags - it clears your head and makes you ready to move forward. So now you know why sometimes I wanna ignore errors, but thanks for asking.
2. Why don't I use VISA? Well, find me a VISA driver for the NEAT-3xx family of controllers, and I will... I use raw GPIB reads/writes (and nothing else) in my 'scan the bus and probe each address' loop described above. I use raw GPIB commands for the NEAT controllers, and VISA for the HP. You guys designed this stuff, not me... What I don't know (and what you might help me with) is whether there's a 'raw' interface that allows you to talk to instruments using VISA calls when there is NOT a VISA driver for the device... kinda like "I wanna use the GPIB read/write, but use the VISA interface so all my code looks the same" deal...
Thanks again!

Suppress Flash Player Error Messages from Browser?

I'm well aware of try catch functions, but in general is
there a simple setting to suppress browsers from displaying
stackTraces on errors?

I have searched through every book, forum, and found nothing
on suppressing Flash Player error messages from the browser. If
it's really not possible, this is terrible news. It's nice to think
that we'd encapsulate everything in try catch methods, but come
on....

Error message in BAPI call

I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
How to get error message in BAPI call when error occurs?
I can catch an exception in BPM but I need to get error message and send it to another system.

Hi Denis,
>>>I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
if you want to use fault messages
consider using ABAP Proxies
>>>>How to get error message in BAPI call when error occurs?
most bapis have return table in which they
return error messages (you can do it either
in a sync way or in an async way if the call is too long - with corrlelation of course)
Regards,
michal

Passing Error message to BAPI Structure in RFC

Hi Experts,
I would like to know how we pass error message to BAPI structurre in RFC?
Plz some one give the details about how we handle the errors.
Thanks in advance.

Like already mentioned before, every Standard SAP BAPI, has an export or tables parameter which is called something like RETURN with structure BAPIRET2. In here, you can store all the messages that are generated during the BAPI Call.
However, if you also want to catch errors like system exceptions and communication errors, you will have to add these exceptions manually:
EXCEPTIONS
SYSTEM_FAILURE = 1 MESSAGE RFC_MESS
COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
However, not sure if this addition works when calling BAPI from NON-sap application.
Declaration:
DATA: RFC_MESS(128).

Error messages for BAPI

Hello,
Is there any way to get list of all possible error messages in BAPI for BAPI_PO_CREATE1 and BAPI_SAG_CREATE?
I need to prepare check list of all possible error messages BAPI can return while creating PO and Schedulling agreement using BAPI.
Thanks in advance.
Madhura

Try checking the message class used inside BAPI_PO_Create and all the messages in ME21n .
Then you will need to go to this message class and find out al the messages.
But this can go for a long list from 'error for valid vendor numbers, materials , and all the fields etc
Mathews

Flash Player error messages from browser?

Hello.
So a client I'm building assorted things for gets these annoying error dialog boxes popping up in web pages that I never see myself. But they are akin to those I would see if I were running a SWF locally from my hard drive in my Flash Player. I've tested for these errors repeatedly on different servers and different computers and am coming to the conclusion that there is something peculiar about the way their Flash Player in their browser(s) is configured. Have they somehow installed a debug mode of Flash Player? Have they turned on some annoying verbose mode? If so how do I tell them how to turn it off so that they can realize that the way things look in their office are not remotely representative of the way Flash is rendering things on 95% of the computers in the world (and 100% of the computers I have tested things on)?
Thanks for your time.

I have searched through every book, forum, and found nothing
on suppressing Flash Player error messages from the browser. If
it's really not possible, this is terrible news. It's nice to think
that we'd encapsulate everything in try catch methods, but come
on....

Suppress default error messages.

Hi Friends
I have one query that
I had a .jspx page which contains the label textbox and button.
I have made the inputText 's property showRequired="true" and now when i submit the clear button i donot want to display the error message (suppress the error message) for the mandatory fields must contain value.What neccessary changes i should do to achieve this?
          <td class="formLabel">
              <af:outputText value="username"
                             styleClass="AFFieldText" escape="false" id="ot13"/>
              <af:outputLabel inlineStyle="color:Red;" value="*" id="ol3"/>
             </td>
             <td>
              <af:inputText columns="30" value=""
                            required="true" simple="true"
                            label="username"
                            showRequired="true" id="it1">
                           </af:inputText>
             </td>
<td>
<af:commandButton text="clear"
                                action="as" rendered="true"
                                id="cb2">
                                </af:commandButton>
</td>

Look like you are looking for a mechanism to reset the contents from model
You may need to try adding <af:resetActionListener/> as a child of the button whose immediate=true .More details - http://jobinesh.blogspot.com/2009/10/reset-content-of-web-page.html

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error message from source system

Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
AP

Hi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar

Error Message from SAP GUI

Hi,
I have designed a Custom screen for one of my requirements. However when the screen is displayed, I am facing an error message from SAP Front End Server that says " Erroneous data received from server. Application may not work correctly".
What could be the reason ?
Thanks & Regards,
Venkatesh.

Hi,
Please check the belos SAP notes
1453114 Maximum string length
1161022 Dialog box "Erroneous data received from server"
1524462 - Erroneous Data received from server. Application may not work correctly.
Regards,
Naveen.

Suppress an error message from BAPI

Similar Messages

Maybe you are looking for