Error when exporting ABAP Programs and the Project

Hi All,
I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots).
- Screenshot 1 shows an error when exporting a Project.
- Screenshot 2 shows an error when exporting ABAP Program(s).
These errors occur in the DEV environment.
Please help.
Thank you all.
Kind regards,
Roli

Hi Ramakrishna,
I will send the log file for when exporting a project. However, the issue of exporting ABAP Programs is nor resolved.
In CMC we had to configure the system to Generate ABAP = True.
Thank you.
Kind regards,
Roli

Similar Messages

PWA 2010 error when i try to open the project name in Project Center

Hi, this is my first post.
Im having a trouble with our Project Server, when i try to open the project name in Project Center it gives me an error like this:
ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information
Stack Trace:
[SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information]
Microsoft.Office.Project.Server.WebServiceProxy.PWA.WorkflowGetProjectDrilldownInformation(Guid projectUid, String userPropToClear, Boolean bCheckOutProject) +401
Microsoft.Office.Project.PWA.ApplicationPages.ProjectDrillDownPage.OnLoad(EventArgs e) +822
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
And also when i try to open the document that associated with the project in project center it gives me an error like this :
Exception Details: System.Web.Services.Protocols.SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore
to access all error information
Source Error:
Line 12: bool LoadLinkItemsPage = (Request.QueryString["Task"] != null);
Line 13:
Line 14: ProjectWSSInfoDataSet ds = PJContext.Current.PSI.WssInteropWebService.ReadWssData(ProjectGuid);
Line 15: if (ds != null && ds.ProjWssInfo.Rows.Count > 0)
Line 16: {
Source File: c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\PWA\COMMON\wssnav.aspx Line: 14
Stack Trace:
[SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information]
Microsoft.Office.Project.Server.WebServiceProxy.WssInterop.ReadWssData(Guid projectUID) +377
ASP._layouts_pwa_common_wssnav_aspx.PJWebPage_OnLoad(EventArgs e) in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\PWA\COMMON\wssnav.aspx:14
Microsoft.Office.Project.PWA.PJWebPage.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
has anyone experienced this
before and might be able to help? Thank you!

For what it's worth, given the age of this question, I've found that stopping and starting the Project Application Service on each server via Central Admin is less disruptive to the rest of your farm when using Project Server in a larger SharePoint
farm.
IISRESET will cause active user sessions to be disconnected and could result in lost data.
I also found that recycling the app pool associated with my Project Server web application in IIS and restarting the web site did not resolve this situation so the IISRESET is not a guaranteed fix.
Targeting only the Project Application Service from Central Admin removes this minor risk and actually restored access to our Project Sites.
N03L.

Error while exporting ABAP programs for transport

Hi,
In the process of exporting my abap programs so that they can be transported, I released my work request.
However, during release, errors were encountered, and the status of the release was set to 'Release Started'.
The error encountered was
'[STOP ICON] ===> HALT: rscpi_init fails with rc = 1 (twconv. c:957) Please contact the SAP support.'
Can anyone help? Thanks.

check all the objects used in ur report are in same package
Edited by: BrightSide on May 14, 2008 3:53 PM

Error when exporting a pdf in SAP

She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex image

See your other thread.

Error in executing ABAP program. Error occurred when creating dataset

hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for help

r u able to figure it out..........i got the same error .......can someone help me fix this issue

Mapping Workbench error when exporting project XML

The following error pops up when trying to export the project deployment xml file.
"The following descriptors do not have corresponding class files. Please check your class path."
The window then lists all of my descriptors.
I have the Oracle 10g database configured and I have created 3 java classes from it. The source code was generated with out any problems.
TopLink version is 10.1.2 on Windows.
Thanks.

I had the same problem, but had already exported source, compiled and put the entry in the classpath in MWB. My problem was caused by some conflict caused by using Java 1.5 to compile the model source but Java 1.4.1 (by default) supplied with MWB. I changed the JRE_HOME and the project deployment file is created and looks OK.
Hope that helps anyone else as silly as I
Mike

RoboHelp 11 - When previewing topics from within the project, a script error displays: 'HHComponent Activator' is undefined. How do you get rid of this script error?

RoboHelp 11
When previewing topics from within the project, a script error diplays: 'HHComponent Activator' is undefined.
How do you get rid of this script error?

Hi there
Have you tried clicking Help > Updates and applying the service release?
If not, I'd start with that.
Cheers... Rick

I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown." Any advice? Thanks!

I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown." Any advice? Thanks!

have you tried doing a save as to a different location? If that doesn't work, do a search here. I seem to remember people having the same problem.
You could also try doing an xml export (I think 5.1 has that capability).

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

TS1702 ?Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions

Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions?

You can only use apps downloaded from the App store, not via a browser. There is no Flash for any iOS device including the iPod.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software.

I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software. after about 50% of the way, it just crashes.
Thank you,
JTF

I am having the same problem - the install crashes around 40%.
I am using MAC OS 10.10.2 and purchased Acrobat Pro monthly subscription. The error message is:
'Acrobat installer has encountered an unexpected failure. Please try again. If it continues to fail, contact Adobe support.'
I have tried several times but keep getting the same error message. Any ideas?
Thanks,
Cindy

I can't open any of my Word documents on my Apple Mac. The error code is EXC_CRASH (SIGABRT) and the blame module name is WordArt. The documents are still there, and I can open them on my iPad when I email them there. Any ideas?

I can't open any of my Word documents on my Apple Mac. The error code is EXC_CRASH (SIGABRT) and the blame module name is WordArt. The documents are still there, and I can open them on my iPad when I email them there. Any ideas?

Uhhhhh... Thank GOD... Got all of my files.
Spent some time on the phone with Apple Care... who was great to deal with but actually... not as helpful as I was hoping. It was suggested that I try DiskWarrior 4 to try to recover the files. $108 later, I had no files.
More calls with Apple Care and they were pretty sure that everything was gone since once the External drive was installed, like a moron, I let TimeMachine go ahead and back up my new MacBook... so it overwrote who knows how many gig that was my entire MacBook.
I wasn't giving up so I called Maxtor, the manufacturer of the external drive itself. They suggested file recovery software from I365... which is also a Seagate company (the makers of the drive). The suggested I simply use their demo because the demo version would find the files. If it found them, I could buy the software to restore them.
It found them! Another $129 after and I was able to restore all of them back to my old PC laptop.
NOW, I just need to figure out how to get the 50gig of HD video files off of my old laptop now and into my Mac and IMovie so I can actually make some DVDs out of them!
I get that Macs and PCs are different formats but I think it is ridiculous that formatting still means basically just wiping out or at least treating massive lots of old data as if it isn't there. There's gotta be a better way to do that.

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. Help!

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!

You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts.

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

Error when exporting ABAP Programs and the Project

Similar Messages

Maybe you are looking for