Error while exporting ABAP programs for transport

Hi,
In the process of exporting my abap programs so that they can be transported, I released my work request.
However, during release, errors were encountered, and the status of the release was set to 'Release Started'.
The error encountered was
'[STOP ICON] ===> HALT: rscpi_init fails with rc = 1 (twconv. c:957) Please contact the SAP support.'
Can anyone help? Thanks.

check all the objects used  in ur report are in same package
Edited by: BrightSide on May 14, 2008 3:53 PM

Similar Messages

  • Error when exporting ABAP Programs and the Project

    Hi All,
    I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots).
    - Screenshot 1 shows an error when exporting a Project.
    - Screenshot 2 shows an error when exporting ABAP Program(s).
    These errors occur in the DEV environment.
    Please help.
    Thank you all.
    Kind regards,
    Roli

    Hi Ramakrishna,
    I will send the log file for when exporting a project. However, the issue of exporting ABAP Programs is nor resolved.
    In CMC we had to configure the system to Generate ABAP = True.
    Thank you.
    Kind regards,
    Roli

  • Error, while calling driver program for Smartforms

    Hi All,
    I am getting a error while running DRIVER PROGRAM of smart form.
    both driver program and smart form running successfully without any error while executing separately. But
    while calling Smart Form from driver program. it is giving error as :-
    *Events are already defined.*
    Description :- You tried to define events for a section, but a section with
    events is already active. You are not allowed to nest events.
    Regards,
    Pavan.M

    This is nothing to do with coding, this coz of error is from smartforms....
    Regards,
    Pavan.M

  • Error while exporting .epa file to transport request

    Hi Experts,
    I got a problem while exporting the transport package to transport request. In the last step of the export process, I am getting a status message as
    "Could not release BIPortalContent.epa to transport request ABCD900005; consult your system administrator."
    Can anyone help me in diagnosing this problem? I could not get a solution for this and due to this, the export process is stopped. I have tried with different transport requests and different authorizations, but result is the same.
    I would appreciate your help in resolving this issue.
    Thank You.
    Regards,
    Murthy J N.

    Hi Bala,
    Yes, I am using CTS
    and I have tried all possibilities but the export to the transport request is not successful.
    Regards,
    Murthy.

  • Error while calling ABAP program from Data Services

    Hi All,
    We have a ABAP program which accepts two parameters 1] a date 2] a string of comma separated ARTICLE numbers .
    We have used a ABAB transform in ABAP dataflow which refers this ABAP program.
    If I pass a string of 6 articles as second parameter the job executes successfully
    But if i pass 9 articles as follows
    $GV_ITEM_VALUES='3564785,1234789,1234509,1987654,1234567,2345678,3456789,4567890,5456759';
    i get the following error
    ABAP program syntax error: <Literals that take up more than one line are not permitted>.
    The error occurs immediately after ABAP dataflow starts, ie even before the ABAP job gets submitted to ECC
    I am using BODS 4.2 . The datatype of $GV_ITEM_VALUES is varchar(1000).
    The ABAP program that gets generated by the DS job has the following datatype for this parameter
    PARAMETER $PARAM2(1000) TYPE C
    Is there a different way to pass string characters to ABAP transform in data services?
    I have attached the screen shot of trace log and error
    Regards,
    Sharayu

    Hi Sharayu,
    The error your getting is because the  literals exceeds more than 72 characters.
    It seems that the length of the string is exceeding more than 72 character.
    Can you check the following in ECC GUI
    Go to Transaction SE38=>Utilities=>Settings=>ABAP Editor=>Editor=> Downwards -Comp.Line  Length(72).
    The checkbox which defines length 72 must be clicked so the error is coming. Can you uncheck the checkbox and then try passing the parameter $GV_ITEM_VALUES using the BODS job
    Regards
    Arun Sasi

  • Error while running saschinvoke program for running the ibots created.

    Hi Experts,
    I am trying to invoke an ibot job from the unix command line. But, it is erroring it out. Can any one please help why is this error.
    [oracle@ginza oracle]$ cd OracleBI
    [oracle@ginza OracleBI]$ cd server
    [oracle@ginza server]$ cd Bin
    [oracle@ginza Bin]$ ./saschinvoke -u Administrator/abc2008 -j 5
    ./saschinvoke: error while loading shared libraries: libnqschedulerobjects.so: cannot open shared object file: No such file or directory
    [oracle@ginza Bin]$ ls -l saschinvoke
    -rwxr-x--- 1 oracle oracle 511132 Jul 30 2008 saschinvoke
    [oracle@ginza Bin]$ pwd
    /sdb1/appl/oracle/OracleBI/server/Bin
    Thanx
    svr
    Edited by: user8699680 on Sep 1, 2009 5:38 PM

    Hi Experts,
    Thanks for all your valuable inputs.
    But still I have another problem in running my script. This time it is with the authentication. here is the log file
    [oracle@ginza svr]$ ./autocache.sh
    Oracle BI SASchInvoke
    Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
    Execution Error: [nQSError: 68019] Authentication Failed.job completed
    [oracle@ginza svr]$ id
    uid=501(oracle) gid=501(oracle) groups=501(oracle)
    I am here trying to run the script with Oracle unix user with which the OBIEE has been installed on linux server. I had checked that, all the files and script has necessary permissions, but missing some authentication. For further information, my instanceconfig.xml file has the following contents... ( where cryptools has run and passphare is mentioned in the instanceconfig.xml file)
    <CredentialStore>
    <CredentialStorage type="file" path="/sdb1/appl/oracle/OracleBIData/web/config/credentialstore.xml" passphrase="ppsecret"/>
    </CredentialStore>
    Pls let me know you valuable inputs to resolve this issue.
    Thanks
    svr

  • ERROR while checking standard program for SAP NOTE 175482(QM)

    HI,
    experts
    i am implementing sap note 175842 QM MODULE .
    My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY.
    but in se38 report comes like this
    REPORT  RQEVAC50.
    REPORT RQEVAC50 MESSAGE-ID QA.
    so while checking error comes boz 2 report hedaing is there .
    I WANT TO DELETE FIRST ONE BUT IT CANT.
    I chose activate anyway but while releasing request it gives error.
    THANKS
    AJAY.

    hi
    error is 'OBJECT REPS RQEVAC50 does not exit create it'**
    I CREATED PROGRAM USING ACCESS KEY SO IT DOES NOT ALLOW ME TO CHANGE OR DELETE ANY LINE IN THE PROGRAM.
    THATS THE MAIN PROBLEM.
    Whwn i created a program RQEVAC50 it is totally blank but while implementing sap note the code comes in my progarm
    so there are 2 report hedaing .
    THANKS
    AJAY.

  • Error while exporting GP transport request

    When I try to exporting GP content for transportation, I always get a error message:Error while exporting transport request, and I check the defaultTrace, it repeat same messages as the number of development object:
    null
    com.sap.caf.eu.gp.base.exception.InvocationException
         at com.sap.caf.eu.gp.model.fnd.transport.translation.impl.S2XWriter.export(S2XWriter.java:154)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportTranslationsPerResource(TransportFactory.java:1892)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportResourcesApplicationToDirectory(TransportFactory.java:1748)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportResourcesToDirectory(TransportFactory.java:1668)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportRequest(TransportFactory.java:618)
         at com.sap.caf.eu.gp.ui.admin.transport.CTransport.exportToLocalFile(CTransport.java:1187)
         at com.sap.caf.eu.gp.ui.admin.transport.CTransport.onExport(CTransport.java:310)
         at com.sap.caf.eu.gp.ui.admin.transport.wdp.InternalCTransport.onExport(InternalCTransport.java:243)
         at com.sap.caf.eu.gp.ui.admin.transport.VWizard.onActionExport(VWizard.java:203)
         at com.sap.caf.eu.gp.ui.admin.transport.wdp.InternalVWizard.wdInvokeEventHandler(InternalVWizard.java:189)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NullPointerException
         at com.sap.caf.eu.gp.model.fnd.transport.translation.impl.S2XWriter.export(S2XWriter.java:125)
         ... 38 more
    null
    java.lang.NullPointerException
         at com.sap.caf.eu.gp.model.fnd.transport.translation.impl.S2XWriter.export(S2XWriter.java:125)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportTranslationsPerResource(TransportFactory.java:1892)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportResourcesApplicationToDirectory(TransportFactory.java:1748)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportResourcesToDirectory(TransportFactory.java:1668)
         at com.sap.caf.eu.gp.model.fnd.transport.impl.TransportFactory.exportRequest(TransportFactory.java:618)
         at com.sap.caf.eu.gp.ui.admin.transport.CTransport.exportToLocalFile(CTransport.java:1187)
         at com.sap.caf.eu.gp.ui.admin.transport.CTransport.onExport(CTransport.java:310)
         at com.sap.caf.eu.gp.ui.admin.transport.wdp.InternalCTransport.onExport(InternalCTransport.java:243)
         at com.sap.caf.eu.gp.ui.admin.transport.VWizard.onActionExport(VWizard.java:203)
         at com.sap.caf.eu.gp.ui.admin.transport.wdp.InternalVWizard.wdInvokeEventHandler(InternalVWizard.java:189)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Can somebody help me about this?

    Hi ,
    Can u pls tell me where exactly you get the error ?
    cheers
    tJ

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

  • Error while exporting transport requests

    Dears,
    In our PI 7.1 server,configured with CTS +,We are getting below error while exporting transport requests:
    Caused by: com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details): EPS_OPEN_OUTPUT_FILE, (service=com.sap.tms)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:98)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.AbapEpsOutputStream.open(AbapEpsOutputStream.java:83)
    ... 40 more
    Caused by: com.sap.conn.jco.AbapException: (126) OPEN_FAILED: OPEN_FAILED
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.execute(MiddlewareJavaRfc.java:1492)
    at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:1065)
    at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:987)
    at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:977)
    at com.sap.conn.jco.rt.AbapFunction.execute(AbapFunction.java:300)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.JCoAdapter.executeFunction(JCoAdapter.java:103)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:78)
    In SE01 it show tp 12 while releasing request.
    Please suggest.
    Shivam
    Edited by: Shivam Mittal on Mar 16, 2010 1:04 PM

    File Permission Issue.

  • DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

    Hello Everyone,
    We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found."  We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
    Kindly help if anyone has faced the same problem with SAP BO 4.1.
    Thanks and Best Regards,
    Ghosal

    Hello Everybody,
    The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
    Thanks for your support.
    Best Regards,
    Ghosal

  • TS1424 error 1009 while downloading any program for ipad

    error 1009 while downloading any program for ipad

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • Error while exporting objects

    Hi friends,
           I am getting the below error while exporting the objects from quality system(xi).
    Error-->
    "Workspace was not defined for software component version xxxx,1.0 of xx.com. Assign the software component version in the Landscape configurator of the change management service to a track."
    Thanks,
    Bharath.

    https://forums.sdn.sap.com/click.jspa?searchID=16530537&messageID=4024393
    Transport using CMS Export Error on Integration Repository
    go thru these for it.

  • Getting Runtiime error while exporting to Excel 97-2000 format (URGENT)

    Post Author: net_us2001
    CA Forum: Exporting
    Hello Everyone,
    This is my first time in this forum.
    I am getting runtime error while exporting the report in EXCEL 97-2000, but exporting perfactly in MS-EXCEL (Data only) format.
    I found the reason is, using expression (formula) for formatting phone number as shown below.
    On table field "abPhone",
       used  "formula = PhoneFormat() " expression on format field -> common tab -> display string .
    Intead that i have used fumula e.g. test1 and used same expression, then it was exporting perfactly..
    Having above problem if i use expression to supress group header and report header. 
    So let me know if anyone can help, why it was giving error in first case.
    Thanks in advance
    Thanks,
    Nitin

    Hi,
    This is the Technical limitation of ABAP list export to local file.
    ALV grid greater than 1023 characters per line will be split into 2 lines.
    To prevent a line break occuring when you download the list as a local spreadsheet file, you must reduce the width of the list in ALV. You can do this either by hiding columns or by changing the column widths in the ALV. Take care that the column heading characters also dont exceed 1023 characters. This will work.
    Thanks
    LG

  • Error while configuring talent profile for ESS

    Dear Experts
    I am having following error while configuring talent profile for ESS:
    The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
    Note
    The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
    The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
    Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
    Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
    Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
    Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
    Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
    Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
    Method: GET_NEXT_UIBBS of program CL_FPM========================CP
    Method: PROCESS_EVENT of program CL_FPM========================CP
    Method: RUN_EVENT_LOOP of program CL_FPM========================CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Any suggestions on how to resolve the error?
    Regards
    Imran

    Imran,
    check this thread
    http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
    Thanks
    Bala Duvvuri

Maybe you are looking for