Error when installing SDK on BW platform

We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

Hi,
it could be that the depending extension was unpacked while installing the extension pack.
please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
uninstall the extension pack in your Design Studio (client side),
go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
if it is checked please unckeck it,
export your extension pack to zip-file,
install your extenion pack again on client side,
now the jar-file should be available.
You sholud deploy your extension on Server without any errors.
kind regards
Patrick

Similar Messages

Error when starting Java(TM) ME Platform SDK 3.0

hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
System Info: Product Version         = Java(TM) ME Platform SDK 3.0
Operating System        = Windows Vista version 6.0 running on x86
Java; VM; Vendor        = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
Runtime                 = Java(TM) SE Runtime Environment 1.6.0_23-b05
Java Home               = C:\Program Files\Java\jdk1.6.0_23\jre
System Locale; Encoding = en_GB (cdctoolbar); Cp1252
Home Directory          = C:\Users\Molten Ice
Current Directory       = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
User Directory          = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
Installation            = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
                            C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
                            C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
                            C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
                            C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
                            C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
Boot & Ext. Classpath   = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
Application Classpath   = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
Startup Classpath       = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
[      0]   INFO - ootstrap.PropertyEditorManager - Registering custom property editors
[    117]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[    217]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[    317]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[    417]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
[    523]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[    627]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[    732]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[    832]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[    932]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[   1032]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[   2166]   WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[   2268]   INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[   3384]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[   5476]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[   7576]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[   9677]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 11777]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 13877]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 15977]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 18077]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 20177]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 22277]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 23379] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
     at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
     at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
     at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
     at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
     at org.netbeans.core.startup.Main.start(Main.java:312)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
     ... 24 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
     at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
     ... 27 more
Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
     ... 32 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:189)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
     ... 37 more
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:189)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
     at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
Caused: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
     at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
     at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
     at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
     at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
     at org.netbeans.core.startup.Main.start(Main.java:312)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
     at java.lang.Thread.run(Thread.java:662)
[ 23598]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 23698]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 23798]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 23898]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 23998]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 24098]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 24198]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 24298]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 24398]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 24498]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 24600]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 24700]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 24800]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 24900]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 25000]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 25100]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 25202]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 25302]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 25402]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 25502]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 25602]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26699]   WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26799]   INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 27914]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 30005]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 32106]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 34206]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 36306]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 38406]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 40506]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 42607]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 44706]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 46806]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:189)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
     at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
     at org.netbeans.core.startup.Main.start(Main.java:312)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
     at java.lang.Thread.run(Thread.java:662)
[ 48018]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 48118]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 48218]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 48318]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 48418]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 48518]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 48618]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 48718]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 48818]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 48918]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 49018]   INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
But nothing worked.
Any help appreciated!
Thanks.

Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

ISScript error when installing Palm Desktop

I am recieving the following error when installing palm desktop for a z22:
"1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
some other info:
Platform: Windows XP Pro
Thanks in advance.
Paul
Post relates to: Zire

follow the steps provided. this is related to your problem.
Error - 1607: Unable to Install InstallShield Scripting Run Time
Update to the Latest InstallShield Installation Engines
http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
What to do?
Follow the Troubleshooting steps below:
Determine if the installation is compressed or uncompressed.
Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer.
Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc.
If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2.
When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
Start the single installation file, but do not continue or cancel the installation dialogs.
Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
Right-click on the installation file that you are trying to install and select Properties.
In the Properties dialog, click on the Version tab.
Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
If the file version number is 2.0x or less:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 6:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 7:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine.
Download ISScript7.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
If No:
If the file version is less the 7.01
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine.
Download InstallShieldEngineUpdate700.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 7.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine.
Download InstallShieldEngineUpdate701.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 8:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine.
Download ISScript8.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 9:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine.
Download ISScript9.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine.
Download InstallShieldEngineUpdate900.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine.
Download InstallShieldEngineUpdate901.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 9.5:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 10:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine.
Download InstallShieldEngineUpdate1000.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine.
Download InstallShieldEngineUpdate1001.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 10.5:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine.
Download ISScript1050.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine.
Download InstallShieldEngineUpdate1050.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 11:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine.
Download ISScript11.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine.
Download InstallShieldEngineUpdate1100.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
Post relates to: Treo 680 (Unlocked GSM)

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

Error when installing "contents of this disk cannot be changed".

I'm getting this error when installing Snow Leopard, 'The contents of this disk cannot be changed'.
Any ideas?

Install 10.5.8 COMBO update, then try SL.

Error when installing app

I keep getting an error when installing some apps - unknown error (0xE8000013)
Anyone know what this is or why this is happening???
any help apreciated

leefilmer,
Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
Hope this helps,
Raleigh

Error when installing applications

I am getting a error when installing a few different application.
I get this error installing the Citrix Receiver, I get similar errors when installing the Cisco VPN software as well. These are two very important aps for us and need to work on 8.1 if we are to move forward with upgrades.
Product: Citrix Receiver(USB) -- Error 1406. Could not write value GUID to key \SYSTEM\CurrentControlSet\Control\Citrix\Tracing\Modules\IcaClient_GenericUsb_Vdgusb. System error . Verify that you have sufficient access to that key, or contact your support
personnel.
It seams like it is not creating the key in the registry, even though I am a local admin on the system. I have tried running it as a domain admin with the same error. I have also verified I can create keys in the registry
I am currently running Windows 8.1 Enterprise eval on my laptop, we are testing this in our environment.
Thanks in advanced for any help, this one has stumped me a little.

Ask Cisco support/forum for help. This seems to be vendor/product specific
https://supportforums.cisco.com/discussion/12191531/cisco-vpn-client-wont-install-error-1406
http://community.spiceworks.com/topic/492304-cisco-vpn-client-installtion-error-code-1406
http://vootwerk.wordpress.com/2008/06/05/fix-error-1406-during-cisco-vpn-client-installation-or-upgrade/
HTH
Milos

Mount error when installing xcode 3 and iOS 4

Hi,
I ran into mount error when installing xcode 3.2.6 and iOS 4.3 downloaded from https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcod e_3.2.6_and_ios_sdk_4.3__final/xcode_3.2.6_and_ios_sdk_4.3.dmg.
I work on Mac mini with Mac OS X 10.6.
Could anyone help? Thanks!
Regards,
Emily

Hi Ken,
Thanks for your advice! I would try to clean up for more free space. I just downloaded one dmg from another website linking to apple. I could successfully install that one, but very often the content in gdb window is empty. Even if the gdb works for some time initially, after loading some specific project, the gdb doesn't provide info any longer :-( Any idea?
It might be the best season in Shenzhen now. It is sunny, but not hot, with temperature from 25 degree centigrade to 30.
Regards,
Emily

Error when installing SDK on BW platform

Similar Messages

Maybe you are looking for