Error while doing BAPI extract using tcode  RSCRM_BAPI

Hi,
  I am trying to extract a OLAP Bex query into a table.  However, I am getting the error message that
Error: Metadata for extract /BIC/0CZCARRYOVR is inconsistent
Error: Error 0 when generating from extract /BIC/0CZCARRYOVR
Where ZCARRYOVR is my extract table.  What could be the reason?
What had happened is that I created this extract table before and then deleted it from SE11.  But now I cannot create the table while extracting.  If I give a brand new table name then it works fine.  Is there any place where table metadata is stores.  I checked TADIR table and there was no extry.  I should have used SE14 and delete the table from database but cant use it now since the dictionary table doesnt exist.
thanks

Hi ,
I have the same issues. If you have solved the issues can you please let me know the solution for this.
Regards,
Varma

Similar Messages

  • Geeting error while doing Mass UD using t code QA41

    Hi
    While doing mass UD using t code QA41 I am getting below error messages:
    1. You can not make the UD because of 0001 non-valuated physical samples,
    2. You can not make the UD because of 0002 non-valuated physical samples,
    My objection is to do mass UD for all INPROCESS inspection lots where results are recorded but no UD given.
    Request a solution where I am doing wrong and a solution to it.
    Thanks in advance.
    Pradipta Sahoo

    Hi Craig
    Thanks a lot for all your answers.
    Last query:  I will not able to do MASS UD if all samples are not valuated means I have to record results in all 3 physical samples.
    1. In QA11 I am able to UD for each inspection lot (where result is recorded in 2 physical sample & 3rd one is not valuated). Why it is so? Why I am not getting the same error that 3rd sample is not valuated.
    2. In QA41 mass UD is not possible if 3rd sample is not valuated. Why I am not getting all inspection lots and getting few in the output screen? Is there any other way where I can valuate all open inspection lots in mass operation?
    3. In QA16, also I am not getting all inspection lots in the output screen. Why?
    Requesting yo clarify my queries to make me undrstand the process better. So that I can convince my higher management to reduce physical sample generation in auto.
    Thanks in advance for your help.
    Pradipta Sahoo
    +91 9909994216

  • Error while restoring an Appset using TCODE:UJBR

    Hi,
    I am trying to restore an Appset (which I took backup)using TCODE:UJBR. But evry time it throws me an error: Error Occured while creating Application RATE via admin API.
    Please suggest how to approach.
    Thanks

    Hi Deepti,
    Thanks for your response. I'm still getting errror even if I take the appset offline.
    every time I'm getting this error with different application names.
    I have also checked program UJA_DATA_CHECKER to check the data structure,evrything looks good.
    Please suggest where do I look..
    Thanks

  • Error while doing usage decison using moment type 321

    Hi,
    I have created a batch by confirming process order
    (t code COR6). But when I do usage decision for this batch using transaction QA11, material stock from batch created by order gets transferred to new batch.
    When I checked material document, there is complimentory movement for batch created with process order.
    For ex.
    I have created batch 000400 by confirmation of process order.
    Batch stock is in quality stock. Now I want to move this stock to unrestricted, for this I did usage decision using transaction code QA11. After usage decision when I checked material documents then I found that there is only one movement for 321 movement for batch 000400 i.e. for debit no credit (that means there is no complimentary moment) & credit movement exists for new batch 000401 which is created by sytem itself.
    My requirement is that system should not create new batch for material posting while using moment type 321, it shoud post material stock to same batch after usage decision.
    It is urgent issue.

    In the SAP IMG configuration,
    Material Management ->Inventory Management and Physical Inventory -->Movement types --> Copy and Change Movement type(OMJJ)
    In the field screen, select movement type and then "321" and getinto the definition.
    Please verify the field "Create new batch" is empty.
    Other reason could be user-exit or custom code which during material movement does the new batch creation.
    Thanks,
    Srinivas Karri

  • ERROR while getting BAPI list using JCo Action

    Hi,
    We are using MII 14. I have created JCo connection and also configured connection alias.
    I am using this two in JCo interface action just to test whether the connection is working fine.
    But I am getting "No RFC authorization for function module RFC_GET_FUNCTION_INTERFACE" when i search for BAPI_*.
    Can you please guide on , what priviliges user which we will use to connect ERP from MII , should have ?
    Thanks

    I do not know the specific Role or Permission required.  It might be in the help documentation,b ut the security folks should be able to figure it out from the error message.  Someone else may know the exact Role or Roles needed.
    The ID you are using does not have external access to the RFC pool, but you should also provide which RFCs you are planning to use as some have additional permissions required.
    Regards, Mike
    SAP Customer Experience Group - CEG

  • Error while doing DELTA Extraction

    Hi BW Experts,
    In my R/3, I have a generic data source ZBUT_VW.
    It receives data from a View which is created based on couple tables.
    When I do full load to the corresponding ODS, it is successful.
    But after that I delete the ODS and created CUBE with DELTA
    I have Initialized delta.
    When I do DELTA extraction, it fails.
    The error
    “The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.”
    I delete the initialization load and trying to do DELTA extraction again and it Fails With the same error
    Please let me know how can I resolve this problem.
    URGENT
    gaurav

    I dont think it is possible to have to additive delta with creation date.
    Try a full load to cube to check if the extractor is working.

  • Error while doing DELTA Extraction (generic data source)

    Hi BW Experts,
    In my R/3, I have a generic data source ZBUT_VW.
    It receives data from a View which is created based on couple tables.
    When I do full load to the corresponding ODS, it is successful.
    But after that I delete the ODS and created CUBE with DELTA
    I have Initialized delta.
    When I do DELTA extraction, it fails.
    The error “The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.”
    I delete the initialization load and trying to do DELTA extraction again and it Fails.
    With the same error
    Please let me know how can I resolve this problem.
    URGENT
    gaurav

    I dont think it is possible to have to additive delta with creation date.
    Try a full load to cube to check if the extractor is working.

  • Weblogic 9.1 with JDK1.6 giving error ( while doing weblogic.appc )

    hi,
    I am trying to build my ear using jdk1.6 with weblogic 9.1.
    I am getting this error while doing weblogic.appc using my ant scripts. Could some one pls let me know the solution for this problem.
    [java] Created working directory: c:\windows\TEMP\appcgen_gdoasis.jar
    [java] <02-Aug-2007 14:54:22 o'clock BST> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile yo
    ur application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
    [java] javax.xml.stream.FactoryConfigurationError: Provider javax.xml.stream.XMLInputFactory could not be
    instantiated: java.lang.InstantiationException
    [java] at javax.xml.stream.XMLInputFactory.newInstance(XMLInputFactory.java:158)
    [java] at weblogic.ejb.container.dd.xml.DDUtils.<clinit>(DDUtils.java:85)
    [java] at weblogic.ejb.container.ejbc.EJBCompiler.parseDescriptors(EJBCompiler.java:1345)
    [java] at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:431)
    [java] at weblogic.application.compiler.AppcUtils.compileEJB(AppcUtils.java:292)
    [java] at weblogic.application.compiler.EJBCompiler.compile(EJBCompiler.java:95)
    [java] at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:113)
    [java] at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:43)
    [java] at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:55)
    [java] at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    [java] at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:24)
    [java] at weblogic.application.compiler.Appc.runBody(Appc.java:151)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:158)
    [java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
    [java] at weblogic.application.compiler.Appc.main(Appc.java:162)
    [java] at weblogic.appc.main(appc.java:14)
    [java] Provider javax.xml.stream.XMLInputFactory could not be instantiated: java.lang.InstantiationExcept
    ion
    Thanks

    Hi,
    First thing, I am not sure this will work :-)
    The main issue is that there is no StAX provider to parse I-not-know-what XML file.
    You may try to execute appc with the parameter
    -Djavax.xml.stream.XMLInputFactory=com.bea.xml.stream.MXParserFactory
    Anyhow, you may still have some issues given that Java 6 is not a supported Java version for WL 9.1.
    Regards,
    lg

  • Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

    Hi All,
    I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
    Goods movement not possible with mvmt type 601
    Can anyone suggest me what will be the solution for it?
    Regards,
    Raghuraman.k

    I tried with the above BAPI but it is not working.
    In my case a delivery has one line item with batch split and other line item without batch split.
    Below is my code :
    DATA : gwa_header_data TYPE bapiobdlvhdrcon,
           gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
           lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
           git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
           gwa_item_data TYPE bapiobdlvitemcon,
           git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
           gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
           git_return    TYPE STANDARD TABLE OF bapiret2,
           gwa_return    TYPE bapiret2.
    *Header data
    gwa_header_data-deliv_numb = '0808000002'.
    *Header Control data
    gwa_header_ctrl-deliv_numb = '0808000002'.
    gwa_header_ctrl-post_gi_flg = 'X'.
    *Delivery Number
    lv_delivery = '0808000002'.
    *Item data and its corresponding control data
    gwa_item_data-deliv_numb      = '0808000002'.
    gwa_item_data-deliv_item      = '900002'.
    gwa_item_data-dlv_qty         = 4.
    gwa_item_data-dlv_qty_imunit  = 4.
    gwa_item_data-fact_unit_nom   = 1.
    gwa_item_data-fact_unit_denom = 1.
    APPEND gwa_item_data TO git_item_data.
    gwa_item_ctrl-deliv_numb      = '0808000002'.
    gwa_item_ctrl-deliv_item      = '900002'.
    gwa_item_ctrl-chg_delqty      = 'X'.
    APPEND gwa_item_ctrl TO git_item_ctrl.
    gwa_item_data-deliv_numb      = '0808000002'.
    gwa_item_data-deliv_item      = '900003'.
    gwa_item_data-dlv_qty         = 6.
    gwa_item_data-dlv_qty_imunit  = 6.
    gwa_item_data-fact_unit_nom   = 1.
    gwa_item_data-fact_unit_denom = 1.
    APPEND gwa_item_data TO git_item_data.
    gwa_item_ctrl-deliv_numb      = '0808000002'.
    gwa_item_ctrl-deliv_item      = '900003'.
    gwa_item_ctrl-chg_delqty      = 'X'.
    APPEND gwa_item_ctrl TO git_item_ctrl.
    gwa_item_data-deliv_numb      = '0808000002'.
    gwa_item_data-deliv_item      = '000020'.
    gwa_item_data-dlv_qty         = 10.
    gwa_item_data-dlv_qty_imunit  = 10.
    gwa_item_data-fact_unit_nom   = 1.
    gwa_item_data-fact_unit_denom = 1.
    APPEND gwa_item_data TO git_item_data.
    gwa_item_ctrl-deliv_numb      = '0808000002'.
    gwa_item_ctrl-deliv_item      = '000020'.
    gwa_item_ctrl-chg_delqty      = 'X'.
    APPEND gwa_item_ctrl TO git_item_ctrl.
    BREAK-POINT.
    CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
      EXPORTING
        header_data    = gwa_header_data
        header_control = gwa_header_ctrl
        delivery       = lv_delivery
      TABLES
        item_data      = git_item_data
        item_control   = git_item_ctrl
        return         = git_return.
    BREAK-POINT.
    IF git_return IS INITIAL.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    ENDIF.

  • Using TCOde rscrm_bapi and a query result in a error

    Hi All,
    When using tcode RSCRM_BAPI the query execution results in a error Query Meta data is Incomplete
    Please suggest me the solution for this ASAP.
    Regards,
    Varma

    Hi Varma,
    is the query working fine?? Otherwise use transaction RSRT2 and "generate a new report"! This should fix problems with query.
    Regards,
    Adem

  • Error while doing ABGL Asset Credit Memo

    Hi Friends,
    I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
    Balance for transaction type group 10 negative for the area 01
    Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
    Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
    If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
    Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
    Thanks
    Sunil

    Hi,
    If the asset has been capitalized during earlier years, use ABGF to post credit memo.  ABGL is meant for assets capitalized during the year.
    Best Regards,
    Madhu

  • Error while uploading the data using FM"upload"

    Hi,
    I encountering an error while uploading the data using text file with FM " UPLOAD"
    The error is "File does not exist or cannot be opened "
    But there is a file with name and extenstion right.
    Regards
    Vishnu

    You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
    DATA: new_mark TYPE bdcdata-fnam.
    CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
    PERFORM bdc_field USING new_mark W_BOM-QTY

  • Error  While doing ABT1N transaction

    Hi,
    I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
    Error Message -No depreciation area for receiving the revenue
    Message no.AAPO149
    Diagnosis
    You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
    You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
    In  both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
    Proceedure
    Check the transfer variant  and check your entry
    please do the needful
    Thanks
    Supriya

    Hello,
    You will have a check box for the same.
    Double click on transaction type, you will see the check box for revenue.
    Otherwise, tomorrow I will get back to you once I am in front of the system.
    Regards,
    Ravi
    Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM

  • Error while doing AIAB Settlement

    Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
    Data for determination of capitalization not managed in area 01
    Message no. AW507
    Diagnosis
    You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
    Procedure
    Choose a different depreciation area.
    Thanks
    KC

    Hi,
    This message could be helpful:
    Error AW507
    Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
    In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
    regards Bernhard

  • Error while doing AUC Settlement in KO88

    Hi
    I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
    Define a settlement cost element for receiver type FXA
    Message no. KD506
    Diagnosis
    In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
    Procedure
    Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
    Please help me
    Thanks
    Kishore

    Please check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
    regards
    Ranjan

Maybe you are looking for

  • Very confused Mini DVI to Video Converter - please help!

    I have a iBook G4 that I use as my home ents hub, I purchased a DVI to Video converter which worked well for about a week until one day my Mac started recognising it as a VGA adapter. When the adapter's plugged in the only options in the displays pre

  • What is the best way to add and use custom fonts with Eloqua?

    We have a custom font that we'd like to use with Eloqua and were wondering how others might have successfully approached this.

  • Problem Installing Final Cut Studio Upgrade

    I recently purchased the Final Cut Studio Upgrade. When I went to input my SN for FCP 6 to install the upgrade, it rejects it as invalid. Have FCP 6 on my computer operating just fine. what gives?

  • Default Sales Order type settings

    Where do I set the default Sales Order type for transaction VA01. trying to avoid employees choosing the wrong order type. Thank you.

  • Movie taking up more space than the size

    Hello. I published a movie in imovie to the media gallery in HD. It is a long video, so I knew it would take up a lot of space. It is listed as 5 GB in my imovie project folder. However, when I "show package contents" of the movie, the actual size of