Error while employee accessing the rejected leave request workitem in UWL

Hi
I am getting this following error while employee accessing his rejected leave request workitem in UWL.
Leave application is working properly to place the leave request and to approve the request, But am getting this below error when employee try to open the rejected leave request workitem through UWL.
Application error occurred during request processing.
  Details:   com.sap.tc.webdynpro.services.sal.core.DispatcherException: Wrong WebDynpro-URL: no application name specified
Exception id: [CA42F00060020059000017BD000630E2000492E154FAEE4C]
Thanks
Ram

Resolved self.
Applied Note 779075.

Similar Messages

  • Error while running leave request Workitem from UWL

    HI,
    While running the workitem from UWL in MSS we are getting the following error
    URL http://sapdev.rediffsap.net:8000/webdynpro/dispatcher/sap.com/ess~lea/LeaveRequestApprover call was terminated because the corresponding service is not available
    i.e its is not launching the Web Dynpro application.
    As result I have checked the following :-
    1) Maintained entries as per SAP note 779075.
    2) Alias for the portal system has been set to SAP_WebDynpro_XSS and UWL has been registered with this alias.
    3) check entried for Task - TS31000007  APPLICATION - CatManagerApprove and PACKAGE - sap.com/msscatapproval which are set in T-code SWFVISU.
    Plus I have also tried the following changes.
    1) All the services in SICF are activated.
    2) I have tried setting the WEBASPATH to blank and set it to /webdynpro/dispatcher and /webdynpr/dispatcher/sap.com but it does not test the WAS connection as correct, but running the Workitem still results in the same error.
    I am running out of ideas now to correct this. Please help.
    Regards
    Shakti

    >
    Shakti Parwanda wrote:
    > Problem has been resolved and I have added alias as SAP_ECC_HumanResources in system alias in UWL and Webdynpro Launch system as SAP_WebDynpro_XSS.
    >
    > And, it solved my problem
    Hi Mr. Shakti
    i too have the same problem ,how did u resolved it.
    i applied the note 779075 still same error is comming
    created three system SAP_R3,sap_its_xss, andsap_webdynpro_xss
    through which system i have to register the system
    Regards
    K Naveen Kishore.

  • Leave request workitem in UWL status update issue

    Hello,
    Once manager receives a workitem in their UWL for leave request, the status is NEW.
    Now when manager click on that workitem..opens it and closes it without taking any action.
    The status must change to "IN PROGRESS".
    This does not happen.
    Status remain as NEW.
    We do not have any issue once Leave is approved or rejected. Workitem gets disappeared appropriately.
    Please help me in resolving this issue.

    Hello Lukas,
    We are on EHP4.
    And it uses Java based applications.
    Now can you please check in you machine the very same scenario.
    Instead of looking at the senders UWL, have a look at the managers UWL.
    Where status is displayed as "New".
    Open the workitem and close it withpout taking any action.
    Then manually refresh your UWL and observe the status. Is it "New" or "In progress".
    However we have just recieved a reply from SAP that it is a standard behaviour. And status would remain as New if no action is taken.
    But still I am not convinced. As if you open that workitem from Backend Inbox. The status in UWL in portal changes to "In Progress" !
    Strange.

  • Error while reading access data (URL, user,password) for the Adapter Engine

    Hi,
    Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.pi1.piserver1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks
    Balaji

    It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
    Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
    Enter the appropriate values for:
    SLD.selfregistration.hostname (Use fully qualified hostname)
    SLD.selfregistration.httpPort
    SLD.selfregistration.httpsPort
    Sandro

  • Error while reading access data (URL, user, password) for the Adapter Engin

    Hi all,
    I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
    Error while reading access data (URL, user, password) for the Adapter Engine
    Is there any way I can resolve this? thanks all
    Regards,
    IX

    Possible reason is Adapter engine is not registered on SLD. Check in SLD.
    You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
    Lauch Visual admin go to Server > services > SAP AF CPA Cache
    Enter the appropriate values for:
    SLD.selfregistration.hostname (Use fully qualified hostname)
    SLD.selfregistration.httpPort
    SLD.selfregistration.httpsPort
    Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

  • Error while writing to the database (PTRV_HEAD/PTRV_PERIO/Cluster TE)

    Hi All,
    At the time of creating a travel request, I am getting the following error :
    Error while writing to the database (PTRV_HEAD/PTRV_PERIO/Cluster TE)
    Please advise how to resolve this issue.
    Regards,
    Rahul

    such problem occor when u have not defined the number range
    Set Up Trip Number Ranges
    if the problems remaines after defining number range...keep check all transaction there may two three more numbers ranges has to define..
    this prblem is only due to number ranges not defined by you.

  • Message failing in SXMB_moni----Error while reading from the secure store

    Hi,
    The scenario is as below
    A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
    The message is failing in sxmb_moni while trying to write the file in the folder.
    The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
    Below is the error seen in moni.:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Call Adapter --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
    Below is Trace log:
    <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->
    <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
    <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace><!-- ************************************ -->
    <Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry  changed:  / (SECSTORE,031) </Trace>
    <Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine  </Trace>
    </Trace>
    </Trace>
    <Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
    Is this because  PI system is a system copy of another system ?
    Regards,
    Sneha

    Error while reading access data (URL, user, password) for the Adapter Engine
    Check out Michal's reply:
    Re: URL for Central Adapter Engine
    As you said there was a system copy it may be the case that some things were not configured properly

  • Error - Could not complete the music store request, the store may be busy .

    I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
      Windows XP Pro  

    I found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
    "C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
    This file contains several very large keys:
    Preferences:129= (41,826 characters in length)
    Music Store= (1,722 Characters in length)
    Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
    In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
    Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
    Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
    Paul

  • Content generation [Error: Unable to access the output directory. The directory is not writable, so

    Content generation
    [Error: Unable to access the output directory. The directory is not writable, so the folio cannot be saved.]
    This means?
    This is fun BTW. Two days and two different silly errors applying themselves arbitrarily. Yesterday was the network, today its this.

    heres the fix i used for on a Mac
    1. While in the Finder, select the menu command Finder > Preferences.
    2. In the General panel, ensure the option "Connected Servers" is selected under the heading "Show these items on the desktop:", then close the preferences dialog box.
    3. Choose the menu command Finder > Hide Others.
    4. Close all open Finder windows to ensure you can see all items on your desktop.
    5. If you locate what appears to be a mounted volume with the name "Users", Control + Click on its icon and choose the contextual menu command Eject "Users".
    6.  Add or update your article(s).
    7.  Cross fingers
    8. If doesn't work ask for a refund

  • Error Message SCCM 2012 ERROR: Unable to access target machine for request

    Should I be concerned with this message, or will it resolve on its own?
    ---> ERROR: Unable to access target machine for request: "2097153953", machine name: "MININT-NAEAFL",  access denied or invalid network path. SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
    Execute query exec [sp_CP_SetLastErrorCode] 2097153953, 53 SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
    This machine is nowhere in my AD or SCCM...It was at one time, But I have deleted it. It still appears in the Logs. The CCM.LOG to be Precise
    Bryan

    No, this is nothing to be concerned with. Assuming you have auto-client push enabled, it will try to push the client agent to a resource without the agent every hour for 7 days. Thus, after the 7 day period expires from the last time it was discovered,
    it won't try to push to this system anymore.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Error while logging in the BPC

    Hi All
    We are using BPC MS version.
    We have encountered the following error, while Logging into the server :
    ' Cannot insert duplicate key row in object ' dbo.TBLDEFAULTS' with unique index ' IX_tbldefaults'. The statement has been terminated.
    I have also seen note no. 1326648 but we are alredy on SP005
    If anybody, has solution for this, please let us know.
    Thanks & Regards
    Rushabh Doshi
    Edited by: R201184 on Nov 19, 2009 3:38 AM

    Usually this happen when you have a bad restore of an appset.
    Or it can happen when you are doing a reimage of one computer into another computer.
    Into tbldefault from appset where you try to connect it seems you have some duplicate records and this is causing the issue.
    You have to find these duplicate records and to leave just a single record.
    Regards
    Sorin Radulescu

  • Object failed to run due to an error while processing on the Job Server

    when i am scheduling a report ith email notification i am getting  below error
    error msg: Object failed to run due to an error while processing on the Job Server
    i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

    hi prithvi,
    i am able to schedule reports to other destinations and reports are delivered as per the requirement.
    i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
    have to check errors on log file....
    @ COULD YOU  PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER  IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE  IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY  AFTER RUNNING REPORT.

  • Error while connecting to the database from a JSP Page

    Hi,
    I am using a simple JSP page which is based on the sample JSP pages from OTN.
    When I try to connect to my database using the following code:
    InitialContext ic = new InitialContext();
    OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
    m_connection = ds.getConnection();
    I get the following error:
    Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
    Does anybody know wht this is happening?
    Any help would be appreciated
    FRank

    Hi Frank,
    Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
    If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
    Ensure the case of the JNDI lookup string, since, it is case sensitive.
    Hope this helps.
    Abhijeet

Maybe you are looking for