Error while reading the Long text Using READ_TEXT

Hi friends,
Right now I am working with Smartforms.While I am reading the Long text of the material using function module READ_TEXT I am getting the following error if the text is not there.
OUT_PURCH_PO ID GRUN language EN not found.
I should not get this error Instead I should get the blank value.
OUT_PURCH_PO   - my material name.
Following is my code.
IF WA_EKPO-KNTTP = 'F' AND WA_MTART-MTART = 'ZMSC'.
   READ TABLE IT_SGTXT INTO WA_SGTXT WITH KEY MATNR = WA_EKPO-MATNR.
   WA_EKPO-TXZ01 = WA_SGTXT-SGTXT.
     NAME = WA_EKPO-MATNR.
    CALL FUNCTION 'READ_TEXT'
       EXPORTING
         CLIENT            = SY-MANDT
         ID                = ID
         LANGUAGE          = SY-LANGU
         NAME              = NAME
         OBJECT            = OBJECT
      IMPORTING
        HEADER            = THEAD
       TABLES
         LINES             = LTEXT.

Hi,
CALL FUNCTION 'READ_TEXT'
EXPORTING
    client                  = sy-mandt
    id                      = id
    language                = sy-langu
    name                    = name
    object                  = object
TABLES
    lines                   = ltext
EXCEPTIONS                           " --> have this
    id                      = 1
    language                = 2
    name                    = 3
    not_found               = 4
    object                  = 5
    reference_check         = 6
    wrong_access_to_archive = 7
    OTHERS                  = 8.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: Avinash Kodarapu on Jun 5, 2009 7:32 PM

Similar Messages

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

MDS-00521 - error while reading the document in Oracle ADF at Runtime

Hi All,
we are using Jdeveloper Version : Oracle JDeveloper 11g 11.1.1.5.0
we are getting below error message while opening the page at run time.
MDS-00521 : error while reading the document app1/screen1.jsff from metadata repository.
MDS-00569 : unable to read document app1/screen1.jsff from file "D:Oracle/Middleware11115_1/user_projects/domains/j2eeprd1/servers/app1j2eeprd1/.....
WEB-INF/Lib/ADFViewControllerapp1.jar!/app1/screen1.jsff
Note : we disable 1) Enable User Customizations and 2) Enable seeded customization in Project properties -> ADF View
can you please help us to resolve this issue.!
Thanks,

This seems issue with MDS schema. You can try two things:
- Restart everything again (database and admin server as well)
- If above doesn't solve you problem. then there must problem while creating schema using RCU. Run RCU utility again, drop and recreate schema and reconfigure OIM.
This is what I suspect. Other experts can jump in with better solution.
regards,
GP

BAPI_ALM_ORDER_MAINTAIN - Error while reading the standard sequence

Hi all,
I am using BAPI_ALM_ORDER_MAINTAIN to add the task list to the order without deleting the existing operations but BAPI_ALM_ORDER_MAINTAIN is giving the error - Error while reading the standard sequence from the document. Please help asap.
Thanks,
Ritu

I Solved this form.
Table I_N_METHODS
REFNUMBER   OBJECTTYPE   METHOD      OBJECTKEY
000001                                    SAVE          000001000069
000001           OPERATION     CREATE       0000010000690170
000002           OPERATION     CREATE       0000010000690180
000003           OPERATION     CREATE       0000010000690190
000004           OPERATION     CREATE       0000010000690200
000005           OPERATION     CREATE       0000010000690210
Edited by: Yonatan Edgardo Diaz on Apr 16, 2010 4:01 PM

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while running the Oracle Text optimize index procedure (even as a dba user too)

Hi Experts,
I am on Oracle on 11.2.0.2 on Linux. I have implemented Oracle Text. My Oracle Text indexes are fragmented but I am getting an error while running the optimize_index error. Following is the error:
begin
ctx_ddl.optimize_index(idx_name=>'ACCESS_T1',optlevel=>'FULL');
end;
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 941
ORA-06512: at line 1
Now I tried then to run this as DBA user too and it failed the same way!
begin
ctx_ddl.optimize_index(idx_name=>'BVSCH1.ACCESS_T1',optlevel=>'FULL');
end;
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 941
ORA-06512: at line 1
Now CTXAPP role is granted to my schema and still I am getting this error. I will be thankful for the suggestions.
Also one other important observation: We have this issue ONLY in one database and in the other two databases, I don't see any problem at all.
I am unable to figure out what the issue is with this one database!
Thanks,
OrauserN

How about check the following?
Bug 10626728 - CTX_DDL.optimize_index "full" fails with an empty ORA-20000 since 11.2.0.2 upgrade (DOCID 10626728.8)

Error while starting the managed server using nodemanager

HI ,
I am getting the below error while starting the managed server from the Admin console. All the serverstart and the node manager proeprties looks fine.
Below is the error in the managed server log,
startWebLogic.sh: grep: not found
startWebLogic.sh: uname: not found
startWebLogic.sh: test: argument expected
can you help me to solve the problem please. i am using weblogic 10.3.3
thanks
Arun

I think you've changed and added some lines into your startWebLogic.sh script. Can you put your script here?

Error while reading the PO in the Backend system   !

Hi all,
We are working on SRM 5.0(SP12) and Extended classic scenario.
The problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" .
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
In RZ20,i find the log:
The error ocurred by processing event SENT_AGAIN with GUID 490F3C0834351AC6E10000000AE48838 and object_id= 3000000307
The R/3 System Version is 4.6C.
Any help is highly appreciated.

Hi,
Thanks for the response.
This problem is hapeening for all PO's in the system.
The no range is smae in both the systems.In SPRO ,howevre we have not maintained the no range in SRM for R/3 system.
Here is the config details:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Range for Local Purchase Orders
EC     3000000000     3999999999     3000000320
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Ranges per Backend System for Follow-on Documents
SAPE02_050     EC            RS
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings-->
Define Transaction Types
ECDP     PO: Direct Material     03     02
ECPO     Purchase Order     EC
I have already gone thorugh note Note 1258634 - Certain events cannot be de-activated.
This note is however valid for SRM 6 and 7.
PO is not reaching R/3 system.
No error in sm58/sm12.
The status in BBP_PD for the PO is :
Stats:
           Status         Description                    Inact
HEADER     I1009          Held                           X
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1043          Ordered
HEADER     I1080          In Transfer to Execution Syst. X
HEADER     I1180          Document Completed
Awaiting your inputs.

Error while reading the analog data?

Hi,
I was trying to read the analog data from 4 voltage channels with -5,+5 voltages as minmum and maximum values.Iwas using 250khz as sampling rate and 2seconds as duration.When I try to read the analog data using DAQmxReadBinaryU16 method.I was getting the following error :
ADC conversion attempted before the prior conversion was completed.Increase the period between ADC conversions.I f you are using external clock check your signal for the presence of noise or glitches.Task Name _unnamed Task<0>.Status C.
I would appriciate if you could do this needful.
Thanks In Advance,
Meka

Meka,
The M Series devices have a specified maximum sampling rate for a single channel. Past a single channel, the maximum sampling rate is then divided down depending on the number of channels sampled. The reason for this is because each M Series device has one analog-to-digital converter (ADC). Every channel in a scan list must pass its data through this one ADC. To allow for this, the M Series devices also have a multiplexer (MUX). Because of settling time limitations with the MUX switching, the maximum sampling rate is the specified single channel sampling rate divided by the number of channels be scanned. In your case, because you are using 4 channels, the maximum sampling rate you can achieve with the 6221 is:
250 KS/s / 4 = 62.5 KS/s
If you need a sampling rate of 250 KS/s for each channel, you may be interested in our S-Series devices. These devices have a separate ADC for each channel, allowing all analog channels to run at the maximum sampling rate simultaneously. Take a look at the PCI-6143, which can sample at 250 KS/s on all of its 8 channels at the same time.
I hope this helps!
Justin M
National Instruments

How to read the long text in Transaction Code : VA02 at runtime??????

Hi,
I am undable to find the long text in TC: VA02 at runtime. Actulally my requirement is like how to compare between the item level long text at runtime and existing long text for that item.
If any body has soluntion, please provide me. I would really be greatfull if any body provide the solution.
Deepak Kumar
E-Mail: [email protected]

Hi Sudheer,
Actually my requirement is to read the text at runtime. Example: If saved text is 'ABC' and it is changed by '123'. Now before saving changed text '123', I need to capture it so that I can compare it with saved text 'ABC' whether it is changed or not?
Couuld you send me some sample code? I would appreciate if you reply at the earliest.
Deepak Kumar.

Getting error while reading the positional flat files

Hi,
I have a requirement to read a Positional Flat file and convert into XML through oracle B2B. I have created a positional flat file .ecs, XSD and parser .ecs file using the blog http://anuj-dwivedi.blogspot.in/2011/10/handling-positionaldelimited-flat-files.html and updated the same in the server.
I have created a agreemnt for inbound scenario But while testing the inbound scenario i am getting an error in B2B as :
Error Code     B2B-50083
Error Description     Machine Info: Description: Document protocol identification error.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Document protocol identification error.
I have tried all the possible ways but getting the same error.
Please guide me to overcome this.
Thanks,
Nishanth

Nishanth,
Have you followed the step#2 correctly -
Copying the parser ecs in the installation directory and adding an entry in XERegistry.xml (of all machines if domain is spanned across multiple machines)
Also make sure that you have provided Identification Value, Identification Start Position and Identification End Position correctly in Document Defintion. Please remember that start position starts from 1 (instead of 0)
Regards,
Anuj

Error While Importing the Attribute Groups using Import Config

Hi All,
I have succesfully exported attribute groups using export config but facing an issue while importing them after resetting the data store.Can any one help me out???
I am facing the follwing weird error and unable to debug it:
ERROR [WatchDog] - Node ENDECA_IMPORT_CONFIG0 finished with status: ERROR caused by: While importing config to Endeca Server: escaped absolute path not valid; nested exception is: org.apache.axis2.AxisFault: escaped absolute path not valid
ERROR [WatchDog] - Node ENDECA_IMPORT_CONFIG0 error details:
java.rmi.RemoteException: While importing config to Endeca Server: escaped absolute path not valid; nested exception is: org.apache.axis2.AxisFault: escaped absolute path not valid at com.endeca.clover.adapters.ImportConfigAdapter.logAndThrow(ImportConfigAdapter.java:208) at com.endeca.clover.adapters.ImportConfigAdapter.execute(ImportConfigAdapter.java:199) at org.jetel.graph.Node.run(Node.java:414) at java.lang.Thread.run(Thread.java:619)
ERROR [WatchDog] - Node ENDECA_IMPORT_CONFIG0 finished with status: ERROR caused by: While importing config to Endeca Server: escaped absolute path not valid; nested exception is:
org.apache.axis2.AxisFault: escaped absolute path not valid
ERROR [WatchDog] - Node ENDECA_IMPORT_CONFIG0 error details:
java.rmi.RemoteException: While importing config to Endeca Server: escaped absolute path not valid; nested exception is:
org.apache.axis2.AxisFault: escaped absolute path not valid
at com.endeca.clover.adapters.ImportConfigAdapter.logAndThrow(ImportConfigAdapter.java:208)
at com.endeca.clover.adapters.ImportConfigAdapter.execute(ImportConfigAdapter.java:199)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
Can you help me with this.
Thanks in Advance,
Kartik P.

When you say that you are trying to import the Attribute Groups using Import Config after resetting the data store, do you mean that you reset the data store, imported all atributes first and then are trying to import attribute groups? Or are you trying to import the entire output of Export Config back via Import Config? Also, can you import anything via Import Config?

Error while reading the Long text Using READ_TEXT

Similar Messages

Maybe you are looking for