"Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated.

I have one big wav file of segued tracks as a mixdown and inserted CD markers where I want marked tracks. "Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated. Why can't I export these marked portions as separate files?

the markers durations need to be configured, there is an easy way to do this using your existing markers.  click the start time of marker 2, this should change to edit mode to type in a new number, just copy the numbers cmd/ctrl+c. then click the end time of marker 1 and paste, cmd/ctrl+v.  now repeat for the rest of the markers, and on the last one enter a value for the end time or click and drag on the duration to manually extend it. once all the markers have a duration, the button should be active to export.

Similar Messages

  • TS4009 I have followed the steps above but when I get to the screen to select a downgraded option, the  Done button is grayed out and won't let me select a new option. I see a lock up in top right-hand corner, but not sure how to unlock it.

    I have followed the steps above for downgrading iCloud storage options, but when I get to the screen to select a downgraded option, the  Done button is grayed out and won't let me select a new option. I see a lock in top right-hand corner, but not sure where to go to unlock it.

    Choose Apple () menu > System Preferences, then click the iCloud icon.
    Click the Manage button.
    Click Change Storage Plan.
    Click Downgrade Options.
    Enter your Apple ID password, then click Manage.
    Choose your current plan, then click Done.
    (from http://support.apple.com/kb/HT5527 )

  • Exporting multiple clips from one sequence as separate files.

    Hello fellow editors!
    I have about 100+ video files that I want to cut into shorter clips, edit a bit and then export in a Final Cut friendly format (currently they are AVCHD mts files) to send it to my friend, who is putting the whole movie together.
    I dont want to use Final Cut for this ( I cannot, I have a windows machine) and I was hoping to work with premier CC and media encoder CC.
    There is a way of putting all clips in one sequence and then nesting each one, then you can send them to Encoder CC and it will render them as separate files - thats is just not very productive, nesting clips one by one and it takes forever for Encoder to import sequences.         
    I was wondering if there is a better workflow? I heard that Final Cut has shortcuts to do this very easily, you just click on all those clips in sequence and "batch export" them, which puts them in some place as separate, already cut files.?
    Anything? I love premier, let my feelings be justified!)

    Kevin Monahan ...
    Lucid George is right ... select one trimmed clip, File->Export->Media, you can choose whether in-out or entire clip.
    Select MORE than one clip, you get a completely different export box ...
    These two selections were "exported" from that bin created by dragging the trimmed clips from the timeline to a new bin ... I don't know what else one is supposed to do. You can't even select multiples clips and batch sub-clipping, which would at least cut the steps down.

  • Syncing "selected groups" of contacts via iTunes to iPad grayed out

    I'm trying to sync only selected groups of contacts and selected calendars to my iPad 2 (iOS 8.1.2) from my MacBook Pro (OSX 10.10.1 Yosemite). I am syncing over wifi, but NOT over iCloud. However, when I go into iTunes, go to "Info", and try to select sync "Selected Groups" under Contacts or "Selected Calendars" under Calendars, both of these options are grayed out. Why??

    I've had this issue myself and it was annoying. The only way I could get it to work again was Reset my iPad and start it as new.  Full discussion here:
    iTunes shows deleted videos/songs etc on iPad when connected
    I think you'll find the screenshots match what you see pretty much perfectly.

  • I got a new iPhone 5 and my itunes music will not sync properly. it will show up on the phone but it is light gray wording and they are not selected only a few songs work. The grayed out music just takes up space. Someone please help.

    My itunes music is grayed out and unplayable on my new iphone 5. only a few songs work and the rest just take up space. They will play correctly in my itunes on the computer but not the phone. Please help.

    I am so relieved to hear that I am not the only one experiencing this! However, I am sorry to hear you are going through this as well. Lucky for me I am upgrading to a 5s which will be sent to me on Wednesday. I did stumble upon an article with tips on how to downgrade back to iOS 7, but I am EXTREMELY apprehensive about doing that myself. Here's the article link if you want to give it a go:

  • 2 weeks ago, Firefox changed. It will not print graphics in a web page or show them in print preview. It also does not provide the ability to select options in "print forms". they are now grayed out.

    I am using www.investools.com
    It prints the graphics in the normal page fine
    but when I switch to prophetcharts, which loads javascript, the graphs do not display or print.
    The text on the left side of the display show but graphs do not, even when I reduce printing size to 30%.
    I am using an HP 8500 Pro Officejet.
    Everything works in IE fine (but I don't want to use IE).

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • TS3992 The option to select iCloud Backup under iCloud-Settings-Backup is "grayed out."  Why is that and what does this mean?

    So I cannot tell if my ipad is backing up to iCloud or not.  Forgive me, but I am just figuring all this out!

    Are you saying that when you go to Settings>iCloud>Storage & Backup, "iCloud Backup" is grayed out at the bottom?  If so, is this an iPad from your employer or do you have your employer's exchange email account on it?  If you do, your employer may have installed a profile on it that prevents you from backing up to iCloud.  If that's the case you would see a setting called "Profile" in Settings>General near the bottom.

  • No audio. sound icon suddenly grayed out

    A week or so after installing the Yosemite update, my macbook air went totally silent. The sound icon grayed out and the sound buttons show up a cross sign and there is basically no sound. Went to sound preferences and there is nothing in the output and input sections and the mute box is ticked and grey(can't be changed). What to do? this is ridiculous!

    If there's a red light visible in the headphone socket, it indicates that the leaf switch is stuck. The leaf is pushed aside by the headphone jack as it's inserted and cuts off sound to the internal speakers.
    Try inserting and removing the headphone plug a few (dozen) times.
    If that doesn't work, you can attempt to tease the switch back with a non-conducting probe (plastic toothpick or similar).
    And be careful; the leaf is fragile and it's an expensive bit to get to and replace, in fact on some models it's directly on the logic board.
    Not sure how true it is, but at least one correspondent claims to have fixed it by cleaning the red laser with a Q-tip, on the theory that dirt on the end may fool the system into thinking a jack is inserted. Not convinced myself, but no harm trying it if you can't sort it the other way.

  • Exporting audio with markers button is greyed out.... ANY HELP MUCH APPRECIATED!

    so, background to the story. Now peak pro is defunkt on OSX I am trying to use Audition to create cdmasters. The idea being I will compile the album in audition, export wav files of each track including gaps and compile DDPi master in Sonoris DDP creator. Should be fine but quite a few limitations I've found already in audition.
    1)Main question is this. Exporting tracks. I have compiled and added all the markers in to a 30+ track cd. I've exported whole thing to a single mixdown that includes marker but the 'EXPORT AUDIO OF SELECTED RANGE MARKERS TO SEPERATE FILES IS GREYED OUT' even if i select everything....
    2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
    3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
    2) & 3) are very annoying when you only want to move one clip by a few frames or seconds.
    Any ideas folks ? Like i say uestion 1 is most pressing!
    Thanks in advance

    thanks guys, all makes sense, really appreciate it.
    I will try the merging out. I was in a hurry to get a CDREF out so ended up just exporting the compiled album out as one wav from audition and adding PQ points in Sonoris. Not ideal especially as running order etc is bound to change. 
    I can't recomened Sonoris DDP creator enough, fantastic program and very reasnably priced. I have Soundblade LE as well but find it too clunky to bother learning, its one of the least intuitive audio programs I've ever come across.
    Maybe Audition and Sonoris should team up, if you could add PQ points into audition it could become the best OSX option for compiling cd masters.
    Did you have any thoughts on questions 2)&3)
    2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
    3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...

  • Bounce or Export Audio with Send-EFX

    can somebody tell me, if there is a time-saving solution to export audio with the sends, automation and inserts? Of course I can bounce a solo-track step by step, but if you have to do it with 100 Songs...
    Tanks for every note

    Use the Bounce button on the Stereo Out. Exports audio with sends, automation and inserts. The whole shebang.
    100 songs ? That's ten albums right there. Are you related to Frank Zappa ?

  • Can't export audio from FCP to Soundtrack Pro

    I'm running FCP 5.0.2 and have Soundtrack Pro 1.0. I'm trying to export audio tracks from a long FCP project I'm working on to ST Pro to clean them up. As shown in Apple's online demo videos, I want to export an audio track and then remove 'pops' and do noise reduction, etc. In FCP I right click the audio track I want and go down to 'Send To' but the option for "Soundtrack Pro Audio File Project" is grayed out and I can't click it.
    If I unlink the tracks and then right click the audio track and 'Send To', the "Soundtrack Pro Audio File Project" isn't grayed out and looks like it would work. But that is only highlighting one audio track, not the other stereo track and not the video track. In the demo video all three were highlighted but when I relink all tracks and try to 'Send To' I get the grayed out "Soundtrack Pro Audio File Project" again.
    Is there something I need to do or a step I'm missing.

    You might be onto something Randy. I noticed in the Timeline if I tried to send an imported .AIF music clip to 'Soundtrack Pro Audio Project' it would allow it and the option wasn't grayed out. So I looked in my Browser window and checked out the file attributes to every clip which are listed to the right of the names. Sure enough, under the AUDIO column the .AIF music files are listed as '1 Stereo' and the rest of my captured video clips are listed in the AUDIO column as '2 Mono'.
    So was there a setting for me to choose during Log and Capture that would have made them '1 Stereo' as opposed to '2 Mono'? Or is this a preference setting somewhere to change that for next time? They were recorded on my camera in stereo I'm pretty sure.
    Now in terms of the massive project I've already captured and edited, should I be able to export these mono tracks individualy and fix them as needed? When I click the 'Send to' 'Soundtrack Pro Audio Project File' for these single mono tracks it asks me to 'Save' the file somewhere, is there a proper place to do this or just anywhere on the HD?

  • PSE4: save layers to separate files?

    Is it possible to save layers to separate files on Photoshop Elements 4? I want to create an animation, but I want each slide to have a different time. When I Save for Web and select Animation, all layers have the same timing.

    No, the only way to do this with PSE is to duplicate layers so that the same one appears longer. So for instance, let's say you have three real frames and you want the first and last ones to appear for 2 seconds and the middle one for four: make a four framed image by duping the middle frame so it's in view for twice as long.
    For anything more elaborate than that, you need a different program, I'm afraid.

  • Can I separate the pages of one PDF file into separate files

    Is there a quick way to separate the pages of a PDF?
    For example, I want to take a 10 page PDF, separate the pages and save them as 10 separate files.
    I know I can go through and extract each page, but I need to do this with multiple documents that can be over 100 pages and to extract each page one-by-one would be extremely time consuming.

    See Thom Parker's latest http://www.acrobatusers.com/tech_corners/javascript_corner/index.php JavaScript Corner http://www.acrobatusers.com/tutorials/2008/04/js_extracting_pages/ Extracting pages from a PDF with Acrobat JavaScript for an example of JavaScript that can extract every 4 pages and place them in an email or new file. This code can easily be modified to extract every page.
    Or you can download http://abracadabrapdf.net/articles.php?lng=en&pg=15 AbracadabraTOOLS 2.5 to add new menu options to your copy of Acrobat that include splitting a PDF by x pages.

  • How do I export detached audio files as separate files, for Pro Tools processing?

    My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
    My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
    I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
    As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
    How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
    Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?

    Michael Holmes1 wrote:
    I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
    You need to explore Compound Clips. This workflow may or may not be of help.
    Select an Event with clips in it and press Option+G to make a (blank) compound clip.
    Select the Event Browser, create a new Event and call it 'Effects'.
    Drag the Compound Clip into this Event.
    Right-click the clip and select 'Open in Timeline'.
    Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
    Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
    Now open a project and select and copy one of the clips with effects etc.
    Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
    This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
    It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.

  • Edit & export audio segments as separate files?

    I'm cutting up recordings of PowerPoint presentations into separate clips, one per slide.  I am wondering how I can edit on the timeline, then mark each slide, master the audio, and export one clip per marker.  Is that segmenting done from Premiere, or is it an option to export one file per marker within Media Encoder? How?
    Or, do I need to use subclips instead? Please don't say I need to do a sequence for each slide (or would that be less messy than it sounds?).
    Or should I do this editing in Soundbooth instead, since the editing is basically audio-driven? How's segmenting done there?

    Hi Kevin -
    It's funny...  We are doing the exact same thing that you are.  We are recording webinars, chunking up the audio into individual files according to PPT slides, and putting the audio back into the PPT presentation so they can be played back as the presentation initially aired.  We're also exporting the reconstituted presentations as standalone webcasts that people watch online.
    Okay - here's how we're doing it...  I record the webinar's audio and video (Camtasia for audio and GoToWebinar's built-in .WMV recorder for video).  I make a new project in Premiere and import both the video and audio.  I only use the .wmv for visual reference (to know exactly where to split the long audio clip).  I go through the audio clip and do an Alt + [ to mark the left side of the work area (essentially the In point) and Alt + ] to mark the right slide of the work area (essentially the Out point).  I then split the clip at the out point (Control + K) in case I have to go back and re-edit or re-export later.  Once I have my slide's audio marked with a work area, I go to file, export, media.  This launches Adobe Media Encoder.  In AME, I make .mp3s of each slide's audio.  I then reinsert the .mp3s in the PPT presentation.
    What I would LIKE to do is put chapter or Flash markers at the end of each slide's audio and then have it chunk up the clips for me based on the markers.  The quest to do that led me to this post.  I'll let you know if I find out any info on how to do that, but for now, the process is pretty manual and time-consuming.  I am a long-time Avid editor, and that offers no solution either.  What have you found with Final Cut?
    Something also that may work for you (but not for us for various reasons) is iSpring Presenter's sync function.  This allows you to bring in the entire audio clip and put it on the first PPT slide.  Then you click a stopwatch icon when the audio is supposed to go to a different slide.  This syncs up your audio and PPT for you.  No more Premiere.  Here is specific info on how to do that.  It works great.  We don't use it because we have to cut back into the presentation with live audio.  But it may work great for what you're doing.

Maybe you are looking for

  • Payment Wizard without payments (on account)

    Hello, maybe I misunderstood the payment wizard but if I add manually a payment (incoming/outgoing), why does it then appear in the recommendation report (as the payment is already DONE)? I don't want to transfer the payment on account back to my sup

  • Which iPad Retina should I buy in the US so it will work in the UK?

    I am going to the States next month and want to buy the new iPad there.  Which iPad Retina should I buy in the US so it will work in the UK, the AT&T or Verizon model? I'm probably staying with O2, but can't tell if different models are sold in the U

  • [Solved] Wireless + pacman = bad

    The university I'm at has wired and wireless internet. For some reason, the wired is down for most of the day, but I managed to download wireless tools and the firmware for my wireless card before it went down again. Obviously the wireless works, see

  • Brand new Nokia N900 ceases just after half a day ...

    I recieved the new Nokia N900 as an upgrade. It crashed few time opening emails, however restarted automatically. Later on it crashed on ovi map (pre installed). I tried rebooting after taking the taking the battery out and putting it back in - no jo

  • Can't link to DB on Testing Server

    I am trying to develop dynamic pages including a login page, but have contunual problems trying to test my setup on my local testing server. I am using MS Access, Vista, IIS7 and .asp pages When I test using the local DSN the connection is fine and t