Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Similar Messages

  • The page with the code for my printer has expired and I need to print a new one but can't figure out

    How do I print out a new sheet with code for wireless setup?

    Are you talking about the IP address or the Mac Address of the printer? If you go into the setup menu you can go to reports or the network for the wireless information depending on what code you are looking for......
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Has anyone one else had problems redeeming the code for the free onetime download of Star Trek 2009 Movie?

    Has anyone one else had problems redeeming the code for the free onetime download of the Star Trek 2009 Movie?

    dawnfromcabot wrote:
    ITUNES HAS CHARGED MY DEBIT CARD $99.99 FOR GLOBAL WAR RIOT-SOME GAME I DID NOT KNOW WAS LOADED ON MY OTHER PHONE; HOWEVER, WHEN I PULLED UP THIS APP TO SEE EXACTLY WHAT IT WAS WAS I SURPRISED TO SEE I COULD DOWNLOAD IT FOR 'FREE'. I HAVE CONTACTED ITUNES THROUGH THIS REDICULOUSLY CHICKEN SH_T SYSTEM THEY USE SO THEY DO NOT ACTUALLY HAVE TO HEAR HOW UPSET A PERSON IS NOW THAT THEY CANNOT BUY FOOD FOR THEIR CHILDREN BECAUSE OF A MISTAKE MADE ON ITUNES PART.  I DID RECEIVE AN EMAILED RESPONSE FROM STEPHANIE WHO ADVISED THIS WAS PUCHARED ON A PHONE THAT HAS PURCHASED DOWNLOADS IN THE PAST. I WONDER IF SHE THOUGHT TO LOOK AT MY ENTIRE DOWNLOAD HISTORY AND DISCOVER THAT NOTHING HAS EVER BEEN PURCHASED ON MY ITUNE ACCOUNT IN THE AMOUNT REMOTELY CLOSE TO WHAT THEY ARE CHARGING ME NOW.  THAT IS BECAUSE I DO TRY TO MONITOR THIS ACCOUNT AND OBVIOUSLY THIS LAST PURCHASE WAS DONE WITHOUT MY KNOWLEDGE UNTIL I CHECKED MY ONLINE BANKING ACCOUNT, WHICH I DO EVERY DAY.  TO MAKE MATTERS WORSE THE APP STATES IT IS FREE TO INSTALL WHEN YOU PULL IT UP SO NO ONE HAS CLARIFIED TO MY WHERE THE $99.99 COMES INTO PLAY.  I WILL NOT DROP THIS UNTIL MY BACK ACCOUNT HAS BEEN PROPERERLY CREDITED IN THE SAME TIME FRAME IT TOOK YOU TO TAKE MY MONEY. I WILL LAUNCH A COMPLAINT WITH EVERY POSSIBLE ENTITY IN THE ITUNES COMPANY AND BUSINESSES OUTSIDE THAT REGULATE THEIR BUSINESS UNTIL THIS HAS RESOLVED IN MY FAVOR AS I AM THE ONE WHO HAS BEEN VICTIMIZED BY A COMPANY I INVITED INTO MY TELEPHONE NETWORK IN GOOD FAITH!!!!!!!!!!!!
    Reading that is giving me a headache, how about normal type.

  • Sending a binary attachment via email, looking for a more clean way

    Hi experts.
    I finally managed to send a binary attachment via email. Why "finally"? Never done before!
    Also I got to manage the "not standard" .SAP file extension, because the attachment is a transaction link.
    So let me explain how i did it:
    take SO_NEW_DOCUMENT_ATT_SEND_API1, filling following input data:
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = st_docdata
          commit_work                = 'X'
        TABLES
          packing_list               = lt_packlist
          contents_hex               = lt_hex
          contents_txt               = lt_content
          receivers                  = lt_recv
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    But how to fill lt_hex? Well I did not found a way to transfer text data into raw data structure (lt_hex is type SOLIX).
    So, here is the trick:
    fill another table, lt_bin type SOLISTI1, with attachment content (text data);
    dump lt_bin content to a file on application server, having care to specify TEXT MODE and UTF-8 encoding;
    now reopen the same file in BINARY MODE and transfer content to lt_hex.
    Why I did not use parameter
    content_bin
    ? Because SAP ECC 6 is unicode enabled (I think UTF-16) and file has got to be UTF-8 or ASCII. Also, packing_list for attachment must specify binary tranfer mode. And doing so each UTF-16 character (2 bytes) is split into 2 characters (1 char + 1 NUL byte). Attachment is now unusable.
    What is the question? Here it is: how to fill lt_hex data directly from text (UTF-16) data, avoiding conversion errors?
    Thank you in advance.

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

  • Having a few problems with the codes for this program.

    i type in the code. in notepad, then compile it to java, but i always seem to get 3 errors. if anyone can help, id really appreciate it.
    using java:
    Calculate the salary at the end of two weeks. You know that:
    ? For the first 40 hours worked in a week the pay rate is $10/hour and after that
    initial 40 hours the pay rate is $15/hour.
    ? If the total salary (week1+week2) is less than $500, the employee will receive 10%
    bonus. If the salary is between $500 and $1000, the employee will receive 5%
    bonus. If the salary is between $1000 and $2000, the employee will receive 1%
    bonus.

    Well, maybe if you showed your code and the complete and exact "messages", we could help you.

  • Problem in the code for detecting the components on the PCB image.

    I am working on a code to detect whether all the trained components are present on the PCB or not.
    I am using the quantum camera and vision acquisition software in labview to capture the image of the PCB to be tested. Then the image is compared with the original PCB image which is having all components.
    I had written the code and it is working only at some instances. I can't understand what the problem really was. Please help to know what the problem was and also help me by specifying the requirements like camera pixel, surrounding effects when the image was being captured, camera options like ZOOM, distance of the object from the camera.
    Thank you

    Hello,
    for starters I suggest reading:
    http://zone.ni.com/reference/en-XX/help/372916M-01​/nivisionconcepts/setting_up_your_imaging_system/
    And in my opinion, you should (in the future) describe the problem more thoroughly and in detail. There is not enough information in your explanation.
    Best regards,
    K
    https://decibel.ni.com/content/blogs/kl3m3n
    "Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

  • Need help with LabVIEW code for motor control.

    Hi,
    My name is Sasi. I am a BME grad student working on my thesis topic of evaluating spine implants for low back pain. For this I am building a test machine that would apply pure moments to a spine specimen. I am using LabVIEW 8.5 to implement control of a brushless AC servo motor. My requirement is,
    Step 1: Initialize the motor.
    Step 2: Start moving it at a uniform RPM to the right (This RPM value too user can enter).
    Step
    3: While doin Step 2; simultaneously read torque cell data (Using DAQ
    asst.). DAQ o/p is from 0 V to 10 V; 0 V being -10 Nm n
                10 V being  +10 Nm
    Step 4: When Torque value reaches +10 Nm, i.e 10 V, the motor stops.
    Step
    5: From the position where motor stopped (i.e no need to reset to
    initial position) Start moving in the opposite direction at the same
                uniform RPM as in Step 2 while reading torque cell data.
    Step 6: Once again when torque reaches -10 Nm, i.e. 0 V, the motor should stop.
    Step 7: Repeat 'Step 2' to 'Step 6' 3 times.
    Step 8: Reset motor postion.
    Till now I have managed to get the motor to move forward n backward @ a desired vel, accl, n deceleration for 3 cycles. I am attaching my code. I am having problem inserting the code for reading DAQmx amidst all this. Can anyone help me out.
    Thnks,
    Sasi.
    Solved!
    Go to Solution.
    Attachments:
    Test_012609.vi ‏35 KB

    Hi Sasidhar,
    I took a look at your problem and I think I have a workable solution for you.  I definitely agree with Lynn's suggestion of using parallel loops.  This will allow the DAQmx portion to run uninhibited by the motion portion, and vice versa.  Plus, you only need to iterate the motion loop whenever the voltage level crosses a threshold.  So, by iterating on the motion code in the same loop that you are iterating on DAQmx code, you are essentially wasting processor.
    I created a VI that should do what you are wanting.  I tested it out myself and it works great.  You might have a tweak a few things to apply to your system (like motion board ID and DAQmx physical channel, etc.).  I used two parallel loops and event-based programming.  Basically the motion loop starts the motor spinning at the specified velocity.  Once the motor is spinning, it waits for the DAQmx loop to tell it that the voltage value has crossed the threshold.  When the voltage value exceeds the maximum threshold (which I set to a value slightly less than 10 to allow for jitter and saturation), the DAQmx loop signals the motion loop that it can finish its iteration.  The motion loop stops the motion, reverses the direction, and starts the motion again.  Once motion has started, it again waits for the DAQmx loop to tell it that a threshold has occurred, but this time, it is looking for a minimum threshold.  I used "Occurrences" to implement the event-based programming in LabVIEW.
    I have commented the code rather thouroughly, so hopefully the comments will answer any remaining questions.  The benefit of using event-based programming for this is that you save processor time, and your motion is more closely synchonized with the DAQmx.  Instead of iterating the motion loop as fast as you can, checking for updates each time, you just pause it, and wait for the other loop to tell you when to start up again.  In the mean time, the processor doesn't have to worry about iterating that loop over and over again.  Also, when the occurrence does occur, you catch it immediately, instead of having to wait until the next iteration.  Thus, you are more closely synchronized with the DAQmx portion of the code.
    I hope this will help you.  Please post back if you have any questions about the code or its implementation.  Good Luck!
    Message Edited by Wes P on 02-03-2009 05:18 PM
    Wes P
    Certified LabVIEW Developer
    Attachments:
    Motion and DAQ.vi ‏59 KB
    DAQmx Loop.png ‏24 KB
    Motion Loop.png ‏17 KB

  • I don't get SMS messages with the code from Apple with two factor authentication

    As soon as Apple enabled two factor authentication in Mexico, I activated the feature. For some time everything worked well. When iOS 8 was launched, I started updating my devices. I was able to update an iPad Air as well as my iPhone 5 (which is the device used for verification). However, when I tried to update my iPad mini, I couldn't. I stopped receiving SMS messages from Apple with the code for verification. Now I am stuck with an iPad mini that I cannot use with my Apple ID and I cannot use iCloud on my brand new iPhone 6 (anticipating the problem, I backed up my iPhone 5 with iTunes and I am up and running, but with no iTunes match and no iCloud backup).
    I have spent time on the phone with Apple support, who promised to return my call with a solution, but they never called back.
    Just a final note. I do not have the recovery key. I trusted Apple and never thought I would need it. The fact is I still think it is Apple's problem because the SMS messages should get to my phone, and they don't. I do not really care losing my iCloud Backups or my photos (I have them all backed up elsewhere) but I don't want to lose my e-mail address (a .mac domain) nor my purchases.

    I sent a message to that person. He replied, but I didn't get anything. To make it even more puzzling, I asked him to cc to my wife and she got his message. Then I asked her to forward it to me, and again I didn't get anything. Next, I  found an old message from that guy and forwarded it to myself. Same effect - the message disappears, although the "sent" folder has a copy!

  • Help with writing code for button

    Hi!
    Can someone help me with the code for a button that sends my menu back to 0?
    This is the code current code, and I've created a button called sistapilen that I want to insert where the regular button "arrow" is not visible. I want sistapilen to navigate me back to 0. (Or if I can get "arrow" to do it and delete "sistapilen"). 
    /Jen
    // File downloaded from www.riacodes.com
    import com.greensock.*;
    var arrayX :Array = [0,-800,-1600,-2400,-3200,-4000,-4800];
    var currentIndex:Number=6;
    left_mc.addEventListener(MouseEvent.CLICK,navigate);
    right_mc.addEventListener(MouseEvent.CLICK,navigate);
    left_mc.buttonMode = true;
    right_mc.buttonMode = true;
    checkArrows();
    function navigate(e:MouseEvent):void{
    if(e.currentTarget == left_mc) currentIndex --;
    else currentIndex ++;
    checkArrows();
    TweenLite.to(content_mc,.5 ,{x:arrayX[currentIndex]});
    function checkArrows():void{
    if(currentIndex == 0) left_mc.visible=false;
    else if (currentIndex == arrayX.length - 1) right_mc.visible = false;
    else{
    left_mc.visible = true;
    right_mc.visible= true;

    Add a listemer for whichever other button you plan to use...
    sistapilen.addEventListener(MouseEvent.CLICK,navigate);
    And try changing your navigate function as follows...
    function navigate(e:MouseEvent):void{
         if(e.currentTarget == left_mc) {
              currentIndex--;
         } else if(e.currentTarget == right_mc){
              currentIndex ++;
         } else {
              currentIndex = 0;
         checkArrows();
         TweenLite.to(content_mc,.5 ,{x:arrayX[currentIndex]});

  • I been using viber for a long with no problems until today it's restarting on its own and once I enter the code it try's to sync contact it restarts again.  I tried reinstalling but it's still the same. Please replay ASAP

    I been using viber for a long with no problems until today it's restarting on its own and once I enter the code it try's to sync contact it restarts again.  I tried reinstalling but it's still the same. Please replay ASAP

    Contact Viber customer or technical support regarding a problem with their iOS app.

  • Problem in fetching the code for the line item

    Hi,
    I am working on a report in which to display the values corresponding to the line item of a PO.
    For, ex, if there are 3 line items 10,140,150 and their condition values such zing,zgrd,zbrd are the condition types consist of different values depending on the line item i.e. 10,140,150.
    My problem is when i execute the code the data of 1st line item is correctly fetched but the rest 2 line item data is pasted as it is. only the main pricre changes and the code for zing,zbrd,zgrd remains same as it is in the first line item 10.
    plzz proivde me guide lines how to solve this problem.
    Here's d code:-
    DATA : vspl LIKE konv-kbetr.
    DATA : vspl1 LIKE konv-kbetr.
    DATA : vkwert LIKE konv-kwert.
    DATA: VSPL2 LIKE KONV-kbetr.    "ZING COST
    DATA: VSPL3 LIKE KONV-kbetr.    "ZGRD COST
    DATA: VSPL4 LIKE KONV-kbetr.    "ZBDL COST
    LOOP AT item.
        SELECT kbetr FROM konv INTO item-rate  WHERE knumv = header-knumv AND kposn = item-ebelp
         AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
          MODIFY item.
       ENDSELECT.
      ENDLOOP.
      LOOP AT item.
        SELECT kwert FROM konv INTO vkwert  WHERE knumv = header-knumv AND kposn = item-ebelp
        AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
        ENDSELECT.
      ENDLOOP.
    CLEAR : vspl , vspl1 , vspl2 , vspl3 , vspl4.
      LOOP AT item.
        SELECT kbetr FROM konv INTO vspl  WHERE knumv = header-knumv AND kposn = item-ebelp  
       AND  kschl = 'ZCOM'.
        ENDSELECT.
        SELECT kbetr FROM konv INTO vspl1 WHERE knumv = header-knumv AND kposn = item-ebelp
        AND  kschl = 'ZBR1'.
        ENDSELECT.
    *******************Begin - new code added on 14.01.2009******************
        SELECT kbetr FROM konv INTO vspl2 WHERE knumv = header-knumv AND kposn = item-ebelp
        AND  kschl = 'ZING'.
        ENDSELECT.
       SELECT kbetr FROM konv INTO vspl3 WHERE knumv = header-knumv AND kposn = item-ebelp
       AND  kschl = 'ZGRD'.
        ENDSELECT.
       SELECT kbetr FROM konv INTO vspl4 WHERE knumv = header-knumv AND kposn = item-ebelp
       AND  kschl = 'ZBRL'.
       ENDSELECT.
    *******************End - new code added on 14.01.2009******************
      ENDLOOP.
      LOOP AT item.
        item-rate  = item-rate + vspl + vspl1.
    *******************Begin - new code added on 14.01.2009******************
        item-rate1 = item-rate1 + vspl2.
        item-rate2 = item-rate2 + vspl3.
        item-rate3 = item-rate3 + vspl4.
    ********************End - new code added on 14.01.2009*******************
        MODIFY item INDEX sy-tabix TRANSPORTING rate.
    *******************Begin -11`` new code added on 14.01.2009******************
        MODIFY item INDEX sy-tabix TRANSPORTING rate1.
        MODIFY item INDEX sy-tabix TRANSPORTING rate2.
        MODIFY item INDEX sy-tabix TRANSPORTING rate3.
    *********************End - new code added on 14.01.2009******************
      ENDLOOP.
    PLZ PROIVDE ME GUIDLINES HOW TO SOLVE THIS PROBLEM .
    Edited by: ricx .s on Jan 19, 2009 10:16 AM
    Edited by: Vijay Babu Dudla on Jan 19, 2009 5:22 AM

    Hello,
    Why are you looping at the same internal table so many times, you could probably perform everything within one loop instead.
    DATA : vspl LIKE konv-kbetr.
    DATA : vspl1 LIKE konv-kbetr.
    DATA : vkwert LIKE konv-kwert.
    DATA: VSPL2 LIKE KONV-kbetr. "ZING COST
    DATA: VSPL3 LIKE KONV-kbetr. "ZGRD COST
    DATA: VSPL4 LIKE KONV-kbetr. "ZBDL COST
    field-symbols <fs>.
    LOOP AT item assigning <fs>.
    SELECT kbetr FROM konv INTO <fs>-rate WHERE knumv = header-knumv AND kposn = item-ebelp
    AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
    MODIFY item.
    ENDSELECT.
    SELECT kwert FROM konv INTO vkwert WHERE knumv = header-knumv AND kposn = item-ebelp
    AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
    ENDSELECT.
    ENDLOOP.
    CLEAR : vspl , vspl1 , vspl2 , vspl3 , vspl4.
    SELECT kbetr FROM konv INTO vspl WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZCOM'.
    ENDSELECT.
    SELECT kbetr FROM konv INTO vspl1 WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZBR1'.
    ENDSELECT.
    *******************Begin - new code added on 14.01.2009******************
    SELECT kbetr FROM konv INTO vspl2 WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZING'.
    ENDSELECT.
    SELECT kbetr FROM konv INTO vspl3 WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZGRD'.
    ENDSELECT.
    SELECT kbetr FROM konv INTO vspl4 WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZBRL'.
    ENDSELECT.
    *******************End - new code added on 14.01.2009******************
    <fs>-rate = <fs>-rate + vspl + vspl1.
    *******************Begin - new code added on 14.01.2009******************
    <fs>-rate1 = item-rate1 + vspl2.
    <fs>-rate2 = item-rate2 + vspl3.
    <fs>-rate3 = item-rate3 + vspl4.
    ENDLOOP.
    Also, use field-symbols and use loop at itab assigning addition so that you can directly change the contents of the table without using modify statment.
    regards,
    Advait

  • I'm having a problem sending a word doc via email. I have Mac for Office 08, when I save the document as a .doc or .docx, and send it to someone, they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon. How do I fix?

    I'm having a problem sending a word doc via email. I have Mac for Office 08, and I'm using Mavericks OS. When I save the document as a .doc or .docx, and send it to someone, (doesn't matter if its safari, chrome or firefox or on my yahoo or gmail accounts) they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon and I can read it. How do I fix?

    I suggest you post on the Microsoft Mac forums since it's their software you're having issues with.
    http://answers.microsoft.com/en-us/mac

  • Problem in triggering the code for CO02 User Exit

    Hi,
    I am using the code for the Tcode CO02 (User Exit) and i am facing a problem that when i am using the code as a normal program it is executing fine and displaying the pop up window and showing the data in it.
    But when i am using that code in the USER EXIT code it is not trigerring that pop up window.
    I am using the enhancement:-
    *PPCO0007 * - Exit when saving production order
    And the include in which i am writing the code is :-
    INCLUDE ZXCO1U06
    plzz provide me guidelines for solving this problem.

    hi ,
    i am using the following: -
    Enhancement No.  ->  PPCO0007 (Exit when saving production order)
    When i click on the enhancement the following is displayed:-
    Function exit  ->   *EXIT_SAPLCOZV_001 *
    When i double click the function exit  the code i had written in the following include:-
    INCLUDE ZXCO1U06
    plzz tell me whether i am doing it right or worng?

  • Streamlining the code for the button group with individual links and rollover imgs

    I am looking for a solution to streamline the code for the array of 20+  buttons located inside the scroll pane.
    I know I can make an array if all the buttons would have a unified code executable change, i.e. they would become larger and brighter.
    My problem is that each button represents an product image in the lights off stage, then of rollover it is a lights on stage so I have to import two images in the on and off stage and play around with the opacity.
    Additional problem is that each button has to ling to a different label.
    My question is: is it possible to unify the code if buttons have that much individuality or I have to make each one of them as in the example below.
    // makes a hand cursor appear over a mc acting as a button for all the buttons inside the scrollpnaeBckgrnd_mc.scrollpaneBckgrnd_btns_mc.
    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.buttonMode = true;
    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.useHandCursor = true;
    ///////////////INDIVIDUAL BUTTONS
              MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLyte _btn.FloraLyte_ON.alpha = 0;
                        var  FloraLyte_btn_Tween:TweenLite = TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.F loraLyte_btn.FloraLyte_ON, .5, {alpha:1, paused:true});
                        MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLyte_btn.addEventListener(MouseEvent.ROLL_OVER, overHandler_FloraLyte_btn);
                        MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLyte_btn.addEventListener(MouseEvent.ROLL_OUT, outHandler_FloraLyte_btn);
            MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLyte_btn. addEventListener(MouseEvent.CLICK, onClick_floralytePopUp);
                      function onClick_floralytePopUp(event:MouseEvent) :void {
                                            gotoAndPlay("floralytepp");
    function overHandler_FloraLyte_btn(e:MouseEvent):void{
             FloraLyte_btn_Tween.play();
             trace("you rolled over me");
    function outHandler_FloraLyte_btn(e:MouseEvent):void{
             FloraLyte_btn_Tween.reverse();
             trace("you rolled off me");
    MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLytell_btn .FloraLytell_ON.alpha = 0;
                        var  myTween:TweenLite = TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.F loraLytell_btn.FloraLytell_ON, .5, {alpha:1, paused:true});
                        MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLytell_btn.addEventListener(MouseEvent.ROLL_OVER, overHandler);
                        MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLytell_btn.addEventListener(MouseEvent.ROLL_OUT, outHandler);
            MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLytell_bt n.addEventListener(MouseEvent.CLICK, onClick_floralytellPopUp);
                      function onClick_floralytellPopUp(event:MouseEvent) :void {
                                            gotoAndPlay("floralyte2pp");
              function overHandler(e:MouseEvent):void{
             myTween.play();
             trace("you rolled over me");
              function outHandler(e:MouseEvent):void{
             myTween.reverse();
             trace("you rolled off me");

    as ned suggested, plan your flow and code into it. here is one example:
    var buttonArray = [someButton, someOtherButton, aDifferentButton];
    for(var i = 0; i < buttonArray.length; i++){
         //get reference to county movieclip
         var mc = buttonArray[i];
         //then add listeners
         mc.addEventListener(MouseEvent.ROLL_OVER, overMe);
    function overMe(e:MouseEvent){
         var mc = e.target;
         switch(mc){
              case: someButton:
                       someOtherButton:   doThis();
                                                     break;
              case: aDifferentButton:     doThat();
                                                     break;
              default:                            //do nothing;
                                                     break;
    function doThis(){
         trace("do this")
    function doThat(){
         trace("do that")

  • I have a problem with the indicator for power on the side of my HP DV6-1341el.

    I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
    Where is the problem?
    I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
    If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

    Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the  ACPI-Compliant Battery Control Method device. 
    Post your results whether they are negative or positive to keep us posted.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • Vista 64 bit and new MacBook Pro 17"

    Any idea where to get Boot Camp drivers for the new 17" MBPro? When trying to install Vista 64 bit the system claims there are no drivers available from the OS X disk or when trying to run the 2.1 update. Thanks!

  • WLC 5508 WPA Authentication Problems

    Hello, We have a WLC 5508 with 7.4.100.0 Firmware. We are using 1141 and 1142 APs and we are having authentication problems with clients that are connecting to our WLAN with WPA+AES autentication. The clients receive in her laptop a password error, a

  • Need to upload Cxml file to HTTPS Server- cannot use SFTP

    WE have a need to use SSIS to first watch for the creation of the CXML file ( I'll use File Watcher) then use some web services to upload this to a secure HTTPS Server. What I am reading from these posts is that the built in web services task in SSIS

  • Setting the minimum anonymous privileged port

    Hello, I am running into problems with a firewall blocking rsh connections on ports below 600. I solved it on solaris 8 & 9 by setting the "tcp_min_anonpriv_port" variable as per the document: http://sunsolve.sun.com/search/document.do?assetkey=1-25-

  • PAPI WS: Calling a Global Activity with instance Access

    Hi, I have a global activity, which has instance access, and want to call it via PAPI WS. How is this possible? Usually you would use activityExecuteApplication call, but this does not seem to work for activities having instance access. Regards Matth