Finding a PKGBUILD for the 2.6.21.4 kernel (for Asus EEE )

I'm trying to build a kernel that will support the Asus Eee's non-source drivers out of the box without ndiswrapper. I also would like to install the whole thing using my pacman. Is there any way to get a complete PKGBUILD for this kernel? If possible, I'd also like to get the associated patches, etc if possible.
I'm basing my hack on some things listed here:
http://cliffhacks.blogspot.com
I played with the CVS for awhile, but couldn't find a way to get the kernel 2.6.21.4 PKGBUILD, and I'm not sure if CVS would even do this.
After this, I'll have to compare the PKGBUILD with the config that Asus used on their kernel. We'll see how it goes. Thanks for any help or tips.

lilsirecho wrote:
beniro;
Normally PKGBUILDS for kernels are not provided in arch.
However, one has been inserted into the aur mix by raymano and it is for kernel 2.6.23.9-1.
What are you talking about - I thought the PKGBUILDs were publicly available. Atleast I can see them - and you could certainly create your own although with a little difficulty for such an early kernel - but It should be possible

Similar Messages

"The Finder can't complete the operation because some data in "For Desta 008 SUR-BPBO-00019.tif" can't be read or written. (Error code -36)

i'm trying to backup MacBook white 10.6.3 manually to my external HD but it gives me this error,"The Finder can’t complete the operation because some data in “For Desta 008 SUR-BPBO-00019.tif” can’t be read or written. (Error code -36). i tried taking the HD out, but it gives me the same error, so pls tell me what to do, i need the backup fast.

Aint you quick to jump to conslusions? So becasue one thing isn't working of the hundreds of things I donwloaded doesnt work, my drivers are broken?
Ok then, let me download some other things to make sure
Minecraft: it worked ✓
Firefox: it worked✓
Synthesia: it worked✓
iExplorer: it worked✓
Pencil: it worked✓
Flash: it worked✓
Synfig was made in 2006, so it's not unlikely that it might not work for some people. By 'some people', I mean me. I was just asking if it was something on my side, but if that's all you got, I think it's highly unlikely that it's my fault. I don't even want it anymore, I got Flash Professional. I was just wondering. I could have sworn you used to write more detailed answers before jumping striaght to conclusions. 'Did this happen to you on anything else?' or maybe even 'Why don't you complain to them?' would have been fine.

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
Pauline

Amasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

I subscribe. Pay monthly. Today, for the first time, I am asked for a serial number? So, where is this thing called a serial number?

Help with finding my serial number. I subscribe. Pay monthly. Today, for the first time, I am asked for a serial number? So, where is this thing called a serial number?

sign out and then back in to your cc desktop app.

On my Macbook pro 15 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive. Is that true?

On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive. Is that true?

That is correct. The tech specs indicate:
Hard Drive Interface
6.0 Gbps Serial ATA (SATA)
Optical Drive Interface
3.0 or 6.0 Gbps Serial ATA (SATA)

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

Depreciation for the Dep Area 03 is positive for the month of december

Dear All,
My client has run the Deprecation for the month of Dec 2011 and for only one asset the value in the depreciation area 03 is become positive. Eg; for 11 months value is credit 1000 and in the month of December it has posted as Debit 1000. And the value of the asset has in the deprication 03 is same as 2011 value because dep. is zero.
Please assit me in this case as I its financial year close.
Regards,
Jayraj

Hi Jayraj,
I assume that the DEP KEY might have been changed for the Area 31 to 0000 after running the dep update run for NOV period but before running the DEC dep update run in AFAB/AFABN.
This could be the only reason, where the whole Dep for the year will get reversed.
Ex: You might have created an addtional DEPRECIATION INTERVAL for Dep area 31, where the starting date for the the same could have set to FY start date.
Regards,
Srinu

Time machine makes 30 backups for the last two days, no backups for any earlier times: is there a way to control it?

I've been running Time Machine in the background for as long as I've owned my current Mac--- a few months. It is a completely generic set-up: it's a desktop (rarely shut off or asleep) connected to an external hard drive that is much larger (1 TB) than my internal hard drive (0.5 TB), and Time Machine is configured to save backups of my whole internal drive to the external drive. The external is half-full, and the internal is a little more than half-full. I often hear my external crunching away, working on something.
I recently needed to access an old file, so I went into Time Machine mode on the folder where it had been deleted a few weeks ago. While I'm not upset that it isn't available (it's my own fault for deleting it), I didn't expect the Time Machine to have such a bad distribution of saved backups. There are 30 backup snapshots of the past two days, and nothing earlier. I was expecting something more like a few from today, a few from this week, a few from this month, and a few going all the way back in time--- a broader distribution.
I don't see any way to control this in the Time Machine Preferences (in fact, very little control at all). Is there a secret way to control it, or some tip to ensure a more useful distribution of saved snapshots?
Thanks,
-- Jim

Thanks, but it doesn't exactly address my question. TimeMachineEditor allows me to set the intervals or times when backups occur, but it doesn't control the algorithm that decides which snapshots should be deleted. My problem was that Time Machine chose to delete all of the old snapshots and keep only the most recent ones: I'd like it to keep more of the recent ones than the old ones, but still keep some old ones.
In fact, the (unmodifyable) text on the Time Machine control panel says that it keeps:
hourly backups for the past 24 hours
daily backups for the past month
weekly backups for all previous months
That would be perfect if it were true.
Perhaps the algorithm did the wrong thing because the size of my internal hard drive varied quite a lot a few days ago: a process got out of control and used up all of my internal disk space. I killed the process and deleted its output (several times), so my internal disk eventually went back down to normal. Perhaps in the intervening hours, Time Machine made a backup, once an hour, and used up all of the external drive space. When it had to choose between keeping "weekly backups of previous months" and "hourly backups of the past 24 hours", it chose to keep hourly backups of the past 24 hours. This was the wrong choice in my case (it was the unwanted output) and is probably the wrong choice in most cases.
Is there a way to control the algorithm that decides which backups to keep and which to delete? I would have it delete the hourly, daily, and weekly backups in a way that preserves their relative distribution.
By the way, while I have made it sound like my problem was a runaway log file (something that would be easy to put in an excluded directory with Time Machine's "Options" button), it was a VirtualBox snapshot merge. The data in question are precious, but were unnecessarily copied many times while VirtualBox failed to merge them properly. I can't simply exclude a directory: I'm talking about a more general problem.
Thanks!
-- Jim

Just updated my mac from Tiger to Mountain Lion. Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help.

I just updated my mac from Tiger to Mountain Lion. wiped the computer clean and started fresh Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help. in Looking for help I was directed here. what do I do?

I don't know enough to not follow directions. I bought the software brand new in a sealed from factory box. Had it sitting around until - last week when I deleted flash on my computer and had to upgrade to the new OSX. Mountain Lion doesn't use iPhoto - so I had to go with something else. Since I already had this new - unopened package I opened it up. Shut down all running programs - inserted the disk and followed all the directions for installation. Still it didn't work.
I have now uninstalled it (the proper way) and am going to try again.
I appreciate your responses.
Thank you!
If this doesn't work - I am going to just buy Lightroom.

If I rent a movie and I later I decide that I want to buy it, Am I going to need to download it once for the rental and a second time for the purchase?

I just wanted to know if I rent a movie and I later I decide that I want to buy it, Am I going to need to download it once for the rental and a second time for the purchase?

You will need to redownload it - rentals expire and are deleted, either 30 days after renting it, or 48 hours (24 hours if you are in the US) after starting to watch it, whichever is the soonest.

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

This is not a question just an observation. happy birthday ipod. thank you for the fantastic 10 years, thank you for changing the way we think about music.

this is not a question just an observation. happy birthday ipod. thank you for the fantastic 10 years, thank you for changing the way we think about music.

frank,
every negative experience is an opportinity to learn. deleting or moderating these experiences would be turning away the chance to learn. as long as users follow the participation rules, we allow even the most negative posts to remain.
as you said, forums are inherently negative by nature as users typically come here to solve a problem. those of us who try to solve the problems are in the minority. we certainly appreciate users such as yourself who voluntarily return to the forum to help out, especially those who initially came here to solve a problem themselves.
thank you as well.
-erik
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

HT201272 click the tab for the content type you're looking for (Music, Movies, TV Shows, Apps, or Books). No. a lie

"From your Purchased page, click the tab for the content type you're looking for (Music, Movies, TV Shows, Apps, or Books)."
Ok, Movies only in US.. that is fine.. BUT I only have Apps and Books to select. Where is my option to download my music again? I can see my purchases under my account but from the store trying to follow the described method - impossible!
I don't care about apps or books.. music.. I want my paid music. No wonder people pirate music?!

Zesty.Zooma wrote:
But will I be able to keep the data stored in the applications, photos, books and also the sorting and the folder arrangements the same way they were, after erasing all the data and synchornizing with the new library?
That is the aim of the process set out here: Recover your iTunes library from your iPod or iOS device.
tt2

Finding a PKGBUILD for the 2.6.21.4 kernel (for Asus EEE )

Similar Messages

Maybe you are looking for