Flat File: no data load into Info Cube

Hi there,
i try to load a flat file. When I simulate the upload its works well. But no Data was load in my Info Cube. When I try define a query there are no available.
Can someone provide me with a solution for this problem?
With rgds
Oktay Demir

Hi Oktay,
in addition to A.H.P.'s marks, check if
- Data is posted not only into PSA but also into datatarget,
- updaterules are active.
- Check Monitor-Status in Cube-Administration
- Check availabilitiy for reporting of the request wthin Cube-Administration.
Cheers
Sven

Similar Messages

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Data is not loaded into info cube

Hi All,
I have a custom defined info cube and full load is running every month and It's hardly taking 1 hour to finish the same.
But this month data came to PSA successfully from there to data target process stopped at update rules, non of the records are getting added to info cube. We haven't done any changes on update rules also.
Can anybody let me know what might be the reason behind it. Thanks.
Regards,
Ashok
Message was edited by: Ashok kaipu

Hi Ashok,
You can do the following:
1. In the Monitor Status tab, turn the request Red.
2. In the Details tab right click this data package and choose Manual Update.
3. After the processing is done, the datapackage will be green but the overall request will still be red.
4. In the Monitor Status tab, turn the request back to original status (this will make it green)
Hope this helps...

Flat file transactional data load error

I am trying to load a flat into a BPC model. I am using a DM " Import transational data load from flat file" to load the data. The transformation file and data file are validated correctly.
However,when i am running the DM package, i am hitting the below message.
Task Name : Load
Cannot perform Read.
Model : Package Status : Error.
We have two secure dimension in the model. I have tried different combinations even with PRimary admin role and i am still getting the same error message.
Is this a secirity related error ? The model has been transported from DEV . In DEV, i am not facing any errors.
Any advise/ help?

Hi King,
I think in the back end you need check the option real time load behavior, Is it in planning mode or loading mode. If possible share your error message screen.
Goto RSA1 ---> select your cube--> Right click---> change real time load behavior--> Change it in to planning mode
Regards,
Saida Reddy Gogireddy

Output in flat file master data loading

Hi gurus,
iam loading master data to an info object from a flat file. In the output the headers ( info objects) names i was seeing only long descriptions, but not technical names given by me. How to see the technical names of the info objects in the output.

Hi Ram,
I am not getting clearly your question.
What i got is
You are able to see the description in the preview in External Data tab. But you are not able to get the corrosponding values after loading. (The same problem i gone thr.)
Soln :
Check the language field. Put it to English ( E ). and try to load the package again.
Note Please check the Preview and simulated preview also.
Let me know if problem persists.
Regards
Vinay

Problem in Flat file transaction data loading to BI7

Hi Experts,
I am new to BI7, got problem in activating data source for transaction data and create transfer routine to calculate sales revenue which is not there in flat file but flat file has got price per unit and quantity sold.
Flat file fields are:
Cust id SrepID Mat ID Price per unit Unit measure Quantity TR. Date
cu100 dr01 mat01 50 CS 5 19991001
created info objects are
IO_CUID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
When i created IO_QTY, unit/curency was given as 0UNIT. In creation of DS, under fields tab, extra field CS was shown I did confuse to which object should i map it. and at the same time when i enter IO_QTY its prompting one dailogbox with 0UNIT, so i said ok. Now i can't map CS to unit as system created automatic ally 0UNIT when i enter IO_QTY. Could you please give me solution for this and procedure to enter formulae for calculating Sales revenue at this level instead of query level. Your solutions will be more appreciated with points.
Await for ur solutions
Thanks
Shrinu

Hi Sunil,
Thanks for your quick response. I tried to assign the infoobjects under the fields tab in creation of DS. I have not reached to data target yet.
Could you please answer to my total question.
Will you be able to send some screen shots to my email id [email protected]
Thanks
Shri

Essbase Studio Performance Issue : Data load into BSO cube

Hello,
Having succesfully built my outline by member loading through Essbase Studio, I have tried to load data into my application again with Studio. However I was never able to complete the data load because it is taking forever. Each time I tried to work with Studio in streaming mode (hoping to increase the query speed), the load gets terminated due to the following error : Socket read timed out.
In the Studio properties file, I typed in, oracle.jdbc.ReadTimeout=1000000000, but the result has not changed. Even if it did work out, I am also not sure the streaming mode is gonna provide a much faster alternative to working in non-streaming mode. What I'd like to know is, which Essbase settings I can change (either in Essbase or Studio server) in order to speed up my data load. I am loading into a Block Storage database with 3 Dense, 8 Sparse and 2 attribute dimensions. I filtered some dimensions and tried to load data to see exactly how long it takes to create a certain number of blocks. With ODBC setting in Essbase Studio, it took me 2.15 hours to load data into my application where only 153 blocks were created with the block size of 24B. Assuming that in my real application the number of Blocks created are going to be at least 1000 times more than this , I need to make some changes in settings. I am transferring the data from Oracle Database, with 5 tables joined to a fact table (view) from the same data source. All the cache settings in Essbase are in default mode. Would changing cache settings, buffer size or multiple threads help to increase the performance? Or what would you suggest that I should do?
Thank you very much.

Hello user13695196 ,
(sorry I no longer remember my system number here)
Before it comes to any optimisation attemps in the essbase (also Studio) environment you should definitily make clear that your source data query performs well at the oracle db.
I would recommand:
1. to create in your db source schema a View from your sql statement (these behind your data load rule)
2. query against this view with any GUI (Sql Developer, TOAD etc.) to fetch all rows and measure the time it takes to complete. Also count the effected (returned) number of rows for your information and for future comparing of results.
If your query runs longer then you think is acceptable then
a) check DB statistiks,
b) check and/or consider creating indexes
c) if you are unsure then kindliy ask your DBA for help. Usually they can help you very fast.
(Don't be shy - a DBa is a human being like you and me :-) )
Only when your sql runs fast (enough for you; or your DBA says is the best you can achieve) at the database move your effort over to essbase.
One hint in addition:
We had often problems when using views for dataload (not only performance but rather other strange behavior) . Thats the reaons why I like more directly to set up on (persistence) tables.
Just to keep in mind: If nothing helps create a table from your view and then query your data from this table for your essbase data load. Normaly however this should be your last option.
Best Regards
(also to you Torben :-) )
Andre
Edited by: andreml on Mar 17, 2012 4:31 AM

Error regarding data load into Essbase cube for Measures using ODI

Hi Experts,
I am able to load metadata for dimensions into Essbase cube using ODI but when we are trying same for loading data for Measures encountring following errrors:
Time,Item,Location,Quantity,Price,Error_Reason
'07_JAN_97','0011500100','0000001001~1000~12~00','20','12200','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
'28_JAN_97','0011500100','0000001300~1000~12~00','30','667700','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
'28_JAN_97','0011500100','0000001300~1000~12~00','500','667700','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
Can anyone look into this and reply quickly as it's urgent requiremet.
Regards,
Rohan

We are having a similar problem. We're using the IKM SQL to Hyperion Essbase (DATA) knowledge module. We are mapping the actual data to the field called 'Data' in the model. But it kicks everything out saying 'Unknown Member [Data] in Data Load', as if it's trying to read that field as a dimension member. We can't see what we missed in building the interface. I would think the knowledge module would just know that the Data field is, um, data; not a dimension member. Has anyone else encountered this?
Sabrina

Data Load into the Cube based on Fiscal Year

Hi All,
I was told to load the data into the cube coming from 3 different datasources, but based on fiscal year. I was told to load the data for 2010, 2009 and so on.
Any suggestions please...

Hi Dear,
            Write the following code in start Routine of Update Rule:-
In BI 3.x
               Delete DATA_Package where calday lt '20090101' and calday gt '20091231'.
           to load data onlyfor 2009.
          same thing for 2010.
In BI 7.0
           Start Routine of Transformation:-
          delete source_package where calday lt '20090101' and calday gt '20091231'.
Regards
Obaid

Data load into SAP ECC from Non SAP system

Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
Monil

Hi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu

Can transaction data be loade into info object

Hi Gurus
Can a Transaction data be loaded into info objects. Appreciate if some one give a simple Definition of transaction data.
GSR

Hi,
You can probably do that but why would you want to do it? Transaction data is generally required for querying purposes and queries run best on multidimensional cube structure, not a flat structure.

How is data loaded into the BCS cubes?

We are on SEM-BW 4.0 package level 13. I'm totally new to BCS from the BW view point. I'm not the SEM person but I support the BW side.
Can anyone explain to me or point me to documentation that explains how the data gets loaded into cube 0BCS_C11 Consolidation (Company/Cons Profit Center? I installed the delivered content and I can see various export data sources that were generated. However I do not see the traditional update rules, infosources etc.
The SEM person has test loaded some data to this cube and I can see the request under 'manage' and even display the content. However the status light remains yellow and data is not available for reporting unless I manually set the status to green.
Also, I see on the manage tab under Info-Package this note: Request loaded using the APO interface without monitor log.
Any and all assistance is greatly appreciated.
Thanks
Denny

Hi Dennis,
For reporting the virtual cube 0BCS_VC11 which is fed by 0BCS_C11 is used.
You don't need to concern about the yellow status. The request is closed automatically after reaching 50000 records.
About datastream - you right - the BW cube is used.
And if your BW has some cubes with information for BCS on a monthly basis, you may arrange a load from a data stream.
This BW cube I make as much similar to 0BCS_C11 by structure as possible -- for a smooth data load. The cube might be fed by another cube which contains information in another format. In update rules of the first cube you may transform the data for compatibility of the cubes structure.
Best regards,
Eugene

How to make data loaded into cube NOT ready for reporting

Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
Please suggest. <removed>
Thanks

See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
Hope this helps...

AWM Newbie Question: How to filter data loaded into cubes/dimensions?

Hi,
I am trying to filter the amount of data loaded into my dimensions in AWM (e.g., I only want to load like 1-2 years worth of data for development purposes). I can't seem to find a place in AWM where you can specify a WHERE clause...is there something else I must do to filter data?
Thanks

Hi there,
Which release of Oracle OLAP are you using? 10g? 11g?
You can use database views to filter your dimension and cube data and then map these in AWM
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Uploading data in to info cube.

Hi
I am new to APO. I was able to create infocube and all that stuff. but was not able to upload data in to info cube,
Can some one explain me the process of uploading data in to info cube.
Regards
Deepu

HI Deepu
There could a lot of reasons why the data is not getting loaded in the info cube. It all depeds what type of data source is being used to load the data. That is are you trying to load the data through a flat file or you are using another info provider (info cube, ODS, etc) to load the data in your info cube.
For example, if it is a flat file, you may want to check if the format of the file is correct or you could preview the data before you upload the entire file, etc
If you are loading it from an another info provider, then you could first try and load the same in the PSA and see if the data is loaded in the PSA properly.
So if you can describe the error that you are getting while you upload data, it wil be more clearer. Also if you can add a little bit of architecture of what are trying to build, it will be better to give pointers.
In the meantime, the process of uploading data into the info cube is that first you have to create a data source depending upon your source system. Then you may create a info source, transfer structure and communicattion structure. Then you create the info provider (in your case the info cube), then create the update rules and then the info package finally to load the data.
I hope this helps.
Rgds, Sandeep

Flat File: no data load into Info Cube

Similar Messages

Maybe you are looking for