Getting error while Archiving the IDOCS

Hello,
i am using the archiving object IDOC.
I am getting an error "Infostructure SAP_IDOC_001 contains error. When running the production Mode.
I tried to run the same in Test mode there was no error.
The error is occurring in the delete program.
I tried to debug it and figured out that while selecting the Archive file to delete it is giving the error.
The IDOC has been written successfully to the archive file path.
Not able to figure out as to why it is giving error when running in Production Mode
Thanks
Nishant

if SAP gives an error "Infostructure SAP_IDOC_001 contains error", then I would focus on this.
Of course this error can only happen in production mode, as SAP will only then update the infostructure, it does not update infostructures in test mode.
use SARI, click customizing, enter Infostructure SAP_IDOC_001 and check if you can activate the info structure without errors.
check if OSS note 1358690 is of some help. Otherwise open a message at SAP directly.

Similar Messages

Error while archiving the repository

Hi all
We are facing error while archiving the repository. It is giving following error while archiving:
Error reading blob from A2i_CM_XMLschema table
Operation ended in ERROR : 84020008H : Database binary object error.
Can anybody help me on this.
I am not getting error while working with repository. Its working fine but only while archiving its giving this error.
Thanks in advance.

I tried doing that . Now after compacting i am not getting warning while verifying but while archiving i am getting following error :
*Error reading blob from A2i_CM_XMLSchema table*
*$$$ Operation ended in ERROR : 84020008H : Database binary object error.*
Also I tried unarchiving from earlier archived file but for unarchiving also its giving me following Error:
MDM Repository data is out of date or locked by another MDM Server. Refresh the data and try the operation again.
I checked. There is no another MDM server accessing the repository. What does it mean by Refresh Data.
Do above two problems inter-related.
Can anybody help me on this.
Thanks in advance

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Error while posting the IDoc for Customer Invoice.

hi,
I m posting Customer Invoice through LSMW using IDocs.
Basic type is FIDCCP02 and message is FIDCC2.
While posting the Idoc I m getting error as:
'Document or line item does not exist for invoice reference'.
I m not getting the error why it is asking for invoice reference because
in FB01 it is not asking for any reference or anything.
Even in f-22 also it is not asking for the same.
In Idoc all the item level values are coming prorperly.
If anybody worked on such issues then please reply.
-Thanx.
-Umesh

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Getting error while exporting the report

Hi,
I am facing error while exporting the report. Getting below error.
"No data can be exported because there are no rows.Operation failed."
how come this error is coming even though my report contains data.
please do the needful.
i am using the version discoverer 10g.
Thanks,
RC.

I am having the same problem. I found this article in which the user was exporting 100,000 plus records and had the same issue exporting (Discoverer workbook exported to excel error - No dta can be exported and they were able to fix it by adjusting two memory settings in their pref.txt file. However, in my report there are only 1,100 records with eleven columns being returned. I export much larger reports on a daily basis.
Originally, the report was returning records and when I would go to retrieve all records it would tell me that all the rows could not be returned and the data may be incomplete. After scrubbing my SQL I no longer get that message, but the report still will not export and I get the same error as you.
I have not tried the pref.txt settings fix but may try it today to see if that is a workaround. I will then have to evaluate whether it is a good fix or just a band-aid.

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Getting error while Importing the Application

Hi,
I am Getting Problem While Importing the Application
We are moving the Application from Test enivorment to Production Environment, Both are Oracle 10g with HTTP server and Application Express 3.2.1.
While Importing i am getting Error like.
Error report:
ORA-06550: line 3627, column 1:
PLS-00123: program too large (Diana nodes)
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
Please Help Me its Urgent

Hi joel,
Even tried for the Copy of the same application in the same Application but its giving the same error.
and I tried with the SQL Developer It shows the error like
Set Application ID...
...authorization schemes
Rollback
Error starting at line 200 in command:
begin
--application/shared_components/security/authorization/des_mstr_delete
wwv_flow_api.create_security_scheme(
p_id => 7573129300337441 + wwv_flow_api.g_id_offset
in the line 200 the above code starts.
at end This will be displayed
Error report:
ORA-06550: line 3652, column 13:
PLS-00123: program too large (Diana nodes)
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action

Getting Error While deploying the BPEL process

Hi All,
I am getting the following error while deploying the BPELProcess. The BPEL process is simple one which is having a Recieve from client and another Recieve from FTPAdapterfor Recieve Operation.
Help me in resolving this. Thankyou.
Process "BPELProcess3" (revision "v2009_02_02__34994") successfully compiled.
<2009-02-02 09:51:06,356> <INFO> <default.collaxa.cube.engine.deployment> Process "BPELProcess3" (revision "v2009_02_02__34994") successfully loaded.
<2009-02-02 09:51:18,088> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube delivery": Correlation definition not registered.
The correlation set definition for operation "Get", process "BPELProcess3", has not been registered with the process domain.
Please try to redeploy your process to the process domain.
ORABPEL-03802
Correlation definition not registered.
The correlation set definition for operation "Get", process "BPELProcess3", has not been registered with the process domain.
Please try to redeploy your process to the process domain.
at com.collaxa.cube.engine.delivery.CorrelationRegistry.resolve(CorrelationRegistry.java:91)
at com.collaxa.cube.engine.delivery.DeliveryHelper.createCorrelationSet(DeliveryHelper.java:94)
at com.collaxa.cube.engine.delivery.SOAPProtocolHandler.calculateCorrelations(SOAPProtocolHandler.java:751)
at com.collaxa.cube.engine.delivery.SOAPProtocolHandler.receiveCallback(SOAPProtocolHandler.java:167)
at com.collaxa.cube.engine.delivery.DeliveryService.receiveCallback(DeliveryService.java:446)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.receiveCallback(CubeDeliveryBean.java:99)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.receiveCallback(Unknown Source)
at com.collaxa.cube.engine.delivery.DeliveryHandler.continuePostAnyType(DeliveryHandler.java:416)
at com.collaxa.cube.engine.delivery.DeliveryHandler.continuePost(DeliveryHandler.java:370)
at com.collaxa.cube.engine.delivery.DeliveryHandler.post(DeliveryHandler.java:88)
at com.collaxa.cube.ejb.impl.DeliveryBean.post(DeliveryBean.java:201)
at com.collaxa.cube.ejb.impl.DeliveryBean.post(DeliveryBean.java:156)
at sun.reflect.GeneratedMethodAccessor214.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DeliveryBean_RemoteProxy_4bin6i8.post(Unknown Source)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.java:195)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase$DeliveryServiceMonitor.send(AdapterFrameworkListenerBase.java:2543)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase.executeDeliveryServiceSend(AdapterFrameworkListenerBase.java:569)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase.deliveryServiceSend(AdapterFrameworkListenerBase.java:625)
at oracle.tip.adapter.fw.jca.AdapterFrameworkListenerImpl.performSingleActivation(AdapterFrameworkListenerImpl.java:952)
at oracle.tip.adapter.fw.jca.AdapterFrameworkListenerImpl.onMessage(AdapterFrameworkListenerImpl.java:799)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281)
at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:826)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:228)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
at java.lang.Thread.run(Thread.java:595)

Yes you are right. I do have two recieves and I think I need to set the Correlation set is it so ?
here is the code from my bpel file

<receive name="receiveInput" partnerLink="client"
portType="client:BPELProcess3" operation="initiate"
variable="inputVariable" createInstance="yes">
</receive>

<receive name="Poll_For_Zip_File" partnerLink="FileBinaryRead"
portType="ns1:Get_ptt" operation="Get"
variable="Poll_For_Zip_File_Get_InputVariable"
createInstance="no" bpelx:headerVariable="MyInBoundHeader">
</receive>
Please let me know how can I add the correlation If I had to add in my bepl process.

Getting error while opening the workbook

Hi,
I am getting one error while opening the workbook.
Error: The Dependency "Join condition" is not found in EUL.
Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
Please advice.
Where i can get the dependency information in EUL?
Thanks, rajesh

This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
Russ

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Getting error while starting the server.

I am getting the following error while starting the server. Please help
trc file: "C:\SAP\JP1\JC00\work\dev_jstart", trc level: 1, release: "710"
sysno      00
sid        JP1
systemid   560 (PC with Windows NT)
relno      7100
patchlevel 0
patchno    0
intno      20063500
make       multithreaded, Unicode, optimized
profile    C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
pid        2240
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, JM
arguments :
arg[ 0] : C:\SAP\JP1\SYS\exe\run\jstart.exe
arg[ 1] : pf=C:\SAP\JP1\SYS\profile\JP1_JC00_EmpMXMobile
F
F [Thr 3540] Tue Sep 04 20:55:33 2007
F [Thr 3540] SfCJdkConfig::get: JDK home directory is set by profile
F [Thr 3540]      Java home: C:\SAP\JP1\SYS\exe\run\sapjvm_5
F [Thr 3540] SfCJdkConfig::get: Java VM type is set by profile
F [Thr 3540]      Java VM type: server
F ********************************************************************************
F Java SDK properties (C:\SAP\JP1\JC00\work\jstart.jdk)
F    root directory    : C:\SAP\JP1\SYS\exe\run\sapjvm_5
F    vendor            : SAP AG
F    version           : 1.5.0_07-b00
F    cpu               : x86
F    java vm type      : server
F    jvm library name : jvm.dll
F    library path      : C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin\server;C:\SAP\JP1\SYS\exe\run\sapjvm_5\jre\bin
F    executable path   : C:\SAP\JP1\SYS\exe\run\sapjvm_5\bin
F ********************************************************************************
I [Thr 3540] MtxInit: 30002 0 2
F [Thr 3540] JsfCreateShm: ShmCreate(79, 4096, ATTACH) failed (rc = 3 SHM segment doesn't exist)...
F [Thr 3540] SfCInstanceManager::newState: starting run level 1.
F [Thr 3540] *** ERROR => SfICreateFiElem: FiInit(JSF-FI-BRSESS, 1, 32) failed (rc = 6 invalid argument) [jsfxxshm.c   1909]
F [Thr 3540] *** ERROR => SfEInternalError: SfCInstanceManager::createDynShm: JsfCreateDynShm failed (rc = 1 general error) [sfxxinst.hpp 349]
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : jstart.exe (pid=2240)
When      : 9/4/2007 20:55:34.296
Threads   : 2
Computer Name       : EMPMXMOBILE
User Name           : SYSTEM
Number of Processors: 2
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version     : 5.1 Current Build: 2600
Stack Dump for Thread Id dd4
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0006f784 00000000 7c8025cb 00000000 00000604 00000000 ntdll!KiFastSystemCallRet
0006f7fc 00000000 004385ac 00000000 00000604 00000000 kernel32!WaitForSingleObject
0006f820 00000000 0044aeee 00000000 0044af27 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
0006fa40 00000000 7c9106eb 00000000 78134d85 00000000 jstart!_STL::basic_ostream<wchar_t,_STL::char_traits<wchar_t> >::operator<<
005b36b8 00000000 00000000 00000000 00000029 00000000 ntdll!RtlAllocateHeap
Stack Dump for Thread Id dd8
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0172feac 00000000 7c8314a6 00000000 00000674 00000000 ntdll!KiFastSystemCallRet
0172ff74 00000000 781329b9 00000000 00000000 00000000 jstart!FcaConnection_fcaCloseOutput
0172ffac 00000000 78132a45 00000000 7c910738 00000000 MSVCR80!endthreadex
0172ffec 00000000 00000000 00000000 781329df 00000000 MSVCR80!endthreadex
F
F [Thr 3540] Tue Sep 04 20:55:34 2007
F [Thr 3540] SfCOptions::doExit: goodbye... (exitcode 1, retcode 1)

Hi Viji,
            It seem's some memory(RAM) problem is strucking, can you try to shut down the OS and try to start the server?
Regards,
Hari.

Get Error while update the User defined row table through DSK Code

Hi experts,
I have got an error while updating the user row defined table.
Error is - "Invalid row"
I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
Following Code used for updating the user defined child table.
SAPbobsCOM.GeneralService oGeneralService1 = null;
                                SAPbobsCOM.GeneralData oGeneralData1 = null;
                                SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
                                SAPbobsCOM.CompanyService sCmp1 = null;
                                SAPbobsCOM.GeneralData oChild1 = null;
                                SAPbobsCOM.GeneralDataCollection oChildren1 = null;
                                sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
                                oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
                                // Get UDO record
                                oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
                                oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
                                oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
                                // Add lines on UDO Child Table
                                oChildren1 = oGeneralData1.Child("CBF_FAR1");
                                // Create data for rows in the child table
                                SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
                                oCombo = oItem.Specific;
                                string ShedCode = oCombo.Selected.Value;
                                ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                                string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
                                ldna_Rec.DoQuery(strQuery1);
                                oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
                                oChild1.SetProperty("U_Status", "Ready For Schedule");
                                //Update the UDO Record
                                oGeneralService1.Update(oGeneralData1);
Please Help me it is an urgent requirement,
-Regards
Vikas

hi.
Error is - "Invalid row"
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
As per my knowledge
What i understood is you have 5 lines and you are going to be update 5th line
am i correct..
while u are updating the line in child table
you have to consider like this..
line number         u have to update like
1                                        0
2                                        1
3                                        2
4                                        3
5                                        4
which means in child table treat
line 1 as 0
line 2 as 1
line 5 as 4
If you want to update the line 5 u have to mention 4 th line

Getting Error While creating the iViews in EP.

Dear Experts,
I am getting the below error while creating the new iViews in the EP.
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/pb.
Exception id: [00142A4FD4AA006400000B0F00005BA80004CAFF2F033C5E]
Please help me to resolve this error.
Thanks & Regards,
Sachin Sable

Hi ,
Check the possible causes of error
http://help.sap.com/saphelp_nw70/helpdata/en/f4/1a1041a0f6f16fe10000000a1550b0/content.htm
and check the logs related to that exceptionid.
Koti Reddy

Getting error while Archiving the IDOCS

Similar Messages

Maybe you are looking for