Windows 7, 64 bit, dowloaded the itunes 10 upgrade.  Everything looked fine, seemed to install perfectly.  But it will not run.  The program opens, and within 2-3 seconds an error message pops up, "iTunes has stopped working."  tried reinstall. No luck.

Read other posts and answers about codecs.  But When I followed the Apple Support procedures for reinstall I first uninstalled all Apple software from the PC including QuickTime, and have not reinstalled QuickTime. 
Any help will be much appreciated!

Hi sahgin,
The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

Similar Messages

  • I have just upgraded from Windows XP to Windows 7 then reinstalled the CS4 I had previously paid for (including the unique code number).  Now I get an error message that says "Licencing has stopped working".

    I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number.  Now I get an error msg that says "Licencing has stopped working".  What do I need to do?

    Hello Carole,
    Please try the steps mentioned in the link below:
    Error "Licensing has stopped working" | Windows
    Thanks
    Alisha

  • New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working,  I have looked into sharing tab and my only option is Adobe email settings.  I do have outlook set up to work on computer run

    New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working,  I have looked into sharing tab and my only option is Adobe email settings.  I do have outlook set up to work on computer running windows 8.1  Please help, Mainly use to share pictures.  Thanks!

    One thing puzzles me:
    RedClayFarmer wrote:
    I then found one suggestion that the problem might involve permissions. The suggestion was to right click PhotoshopElementsOrganizer.exe in its installation folder (which on my computer is at at D:\Photo\Elements 11 Organizer) and run Organizer as an administrator. This also failed.
    I don't understand why running the exe from the installation folder would have worked.
    I would have simply tried to run that exe from its real location :
    Sorry, I can't help you more about permissions...

  • Error message - photoshop elements editor has stopped working

    Hi - I've installed photoshop elements 8 twice, and I still get the error message "photoshop elements editor has stopped working" .  I can't seem to get beyond this point.  My system is Windows Vista.  Any help is appreciated.  Thanks

    I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
    This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
    Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again.

  • TS4062 I keep getting the error message "apple outlook DAV has stopped working"

    My phone and I pad all of the sudden just stopped syncing with my desktop.  I have had my phone for over a year when 4s first came out and everything was syncing fine.  Then all the sudden it stopped.  I keep getting the error message "apple outlook DAV has stopped working".  I have rebooted, checked for duplicates, signed in and out of the cloud and still nothing.  Has anyone had this problem and know of a good way to handle it.  Also, now my phone and Ipad don't sync with the cloud either.  Please help.

    Windows 7 Professional.  I meant that when I open a word doc and want to turn it into a PDF, i get the same error message.  In the mean time I paid the $40.00 and spoke to Adobe and after 40 minutes, they re-installed Reader X instead of XI so now it works but I am not overly thrilled that I had to pay for it.

  • Error Message: Unfortunately Xperia Home has stopped working

    I have had my Z3 for nearly 3 weeks now and until this morning all was working well - loved the phone! 
    2 things happened this morning (may be connected).
    On first trying to use the phone (from it being asleep overnight) the screen froze and it would do nothing.  I left it a few minutes (so it went back to sleep again) and all appeared then to be fine.  I did a restart.
    A little later (no more than 90mins) I found the phone to be showing an error message - Unfortunately Xperia Home has stopped working - (OK).   On clicking OK, message appeared again, and again and again. I tried rebooting the phone and hoped this would clear the error. It didn't.  I was, however, by a very round about route able to get on-line. 
    Swipe down to quick settings
    Settings
    Change home screen to simple
    Error message still came up but would go once I clicked OK. I managed to get online and did a search for the error - found this thread:
    http://talk.sonymobile.com/t5/Xperia-J/Unfortunately-Xperia-Home-has-stopped-Working/td-p/720607 
    I had a system update that had downloaded and was ready to install, so before trying to clear all the data on xperia home (as suggested in the thread - Apps - All - Xperia Home - clear data) I ran the update.  This didn't clear the error - Xperia home has stopped working. 
    So, I followed the instructions on the thread above ie, all apps, xperia home, clear data. (It doesn't actually clear all the data, your accounts, passwords etc are all left intact. However, it does clear your home screens of all settings and personalisation (although it didn't change my background).  
    Touch wood, the phone now seems to be OK (having reset my home screens.
    Having been an xperia user for a number of years (I loved my Z and had no problems with it and actually delayed upgrading) I am extremely disappointed that this flagship phone should start giving error messages such as this, particularly after only 3 weeks of use.  I only hope that this is the last time I see this message!
    At least am tech savvy enough to have been able to circumvent the error, get online, find a solution quickly and sort the problem out - all done in the space of 40mins on the way to work!!   
    Has anyone else had this problem?
    Does Sony have any answers as to why this has occurred?
    Hope this all makes sense!!

    Repair your phone with SUS 
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Have a error message "canvas database sync has stopped working"?

    Have a error message "canvas database sync has stopped working"? My computer is a HP touchsmart 300, windows 7 64 bit OS? Need help in fixing it.

    Does it work in a new file? If it does, see Remove minor corruption by exporting. If not, see Replace Your Preferences

  • When I try to load a film, I get an error message "Premier Eliments 12 has stopped working"

    when I try to load a film, I get an error message "Premier Elements 12 has stopped working"

    You'll need to get the specs for these videos and set up your Premiere Elements project accordingly. (MOV is just the package for the files. It tells you nothing of the video specs.)
    Open the video files in the free download G Spot or Media Info and post to this forum the dimensions, frame rate and audio and video codecs listed.

  • Itunes has stopped working. Windows is checking for a solution, Itunes has stopped working. Windows is checking for a solution

    Itunes has stopped working

    This is the simplest fix, if you're still having a problem with it.  I had the same problem, am running Windows 8.1.  Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    Let me know if you have a problem.

  • When i load i tunes, it comes up with error message stating "i tunes has stopped working.A problem caused the program to stop working correctly. Windows will clode the program and notify you if a solution is available". I have no idea to fix

    New laptop, load itunes to find a error message that states, "i tunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". It has me stuffed on such a problem that should be easy to load. Please help!!!!

    Hey there Rodney274,
    It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Continuous Error Message: Dell Support Center Has Stopped Working

    I have Windows V8ista on an Inspiron530s. Through out any operation I continue to get the following massage:
    "Dell Support Center Has Stopped Working                                                                                                                                                  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."  For several weeks I have tried to find the reason for getting the error message. It will appear in a little box several times an hour during any operation. (internet or document) I can find no answers in any forum. I have an HP all-in one printer that I uninstalled & reinstalled the software for at the suggestion of another, but that did not solve the problem.
     AT THE SAME TIME: I have Trend Micro Internet Security,(aka PC-Cillion) and though the firewall & defenses are up, I can not get it to scan the computer for virusus. I have talked with Trend Mico Tech Support 4 times on the phone and various adjustments have been made, but thhas been no fix. They seem to think the problem is connected to this error message.  I am at wits end. Can someone help??  :?/

    Ivy,
    You never did tell us what version of Windows you're using. If it's XP, look in Windows Scheduled Tasks. If Dell Support Center is listed there, delete it.
    Are you really sure you removed Support Center in Add/Remove Programs control panel?
    According to Alexandra, one of the forum VIPs:
    "The newest DSC 3.0 makes things complicated becomes it comes in 2 parts.  There's a 1+MB program called aulauncher.exe that apparently checks for compatibility, plus any current/old versions to be overwritten or uninstalled.  Only if the PC passes the aulauncher "test" do you get the full 40+MB DSC install program.  That's possibly the reason for "you already have the latest version".   Aulauncher also adds a "run once" key to the registry.    If the aulauncher doesn't get it right, you're stuck in a loop."    
    And see if there's anything helpful here, though the links in Dell-Telson's post might be out of date.
    Ron

  • Error message: adobe mediacore CS6 has stopped working --????

    I am trying to run premiere elements 10 on a high=end pc with 8gb of memory, Win 7 Pro4-bit, massive hard drives and no conflicting software (that I can see....).
    Can open up the program and use the manage module. It shows me three files that I have ready to work on. When I go to edit one of those files I get: 'adobe prem elem 10 has stopped working' and then 'adob media core CS6 has stopped working'. I can see from googling that other people have had this problme with no solution from Adobe yet. Any ideas?  And no, running some defragmenter and system check thing on my PC is not in the cards. Don't need to buy any of those guys. Really.....

    After an uninstall of InDesign and the antivirus software, no solution to the problem.  I went into the startup menu and started doing selected start ups.  I was able to narrow down the conflict to the "windows management instrumentation" program.  When this is not running, I get the message that my ID has reached its activation limit and I need a new number or it needs to be deauthorized on at least one computer.  There are a couple of other programs that need WMI to run as well.  I did go in and delete the preferences since nothing I had was hard to recreate.  Can the other files in the cache be deleted as well?  Will ID look for them and recreate them such as the one in the recovery folder?  Anyway, I had one document that I have been working on be rescaled-very strange.  Everything else was unchanged.  One other thing, when I would get the error message, I would close and then reopen the document without any problem.  However, when I closed it again, even if all i did was view it without changing anything, I would get the prompt if I wanted to save the changes.
    So does that help at all in narrowing down the problem?  I have reinstalled the antivirus, and it did not affect anything.  As long as I don't run WMI, I don't get the error message.
    thanks,
    Clark

  • Occasional error message saying "Labview.exe has stopped working"

    Hi,
    I am using Labview 8.0 on a Windows Vista operating system to communicate with lab instruments through GPIB. Occasionally, when one of my programs finishes running, an error message appears saying "Labview.exe has stopped working". The error window gives me the option to close the program or debug. After clicking debug, Windows cannot find the source of the error and the all labview applications get closed. Any ideas? Thanks.

    The code that I have been having an issue with is attached. The main program is called "Frequency Sweep Real Time2". The other two attachments are subVI's used within the main program. I am a young programmer and I have never had any official training with Labview so sorry if my Labview programming is unconventional or just plain bad. Thanks to whoever looks this over.
    -Ryan
    Attachments:
    Frequency Sweep Real Time2.vi ‏443 KB
    Read multiple values.vi ‏26 KB
    Save_data2.vi ‏22 KB

  • ITunes has stopped working (trying to sync)

    I posted this the other day on the iphone 3gs but now that i have the 4 and still same problems, here is my issue.
    So i updated iTunes to the latest and updated my 3gs to iOS4, i tried to sync some music and all i get is crash after crash.
    I have tried:
    1) Uninstalling iTunes and all apple software, reboot, reinstall, reboot.
    2) Replacing the 2 .dll's (libeay32.dll, and ssleay32.dll) in the c:\windows\system32 and the syswow64 folder, the dll's did not exist to begin with.
    3) Rebooted several times.
    4) Checked to make sure i have no podcasts to sync.
    5) Called apple support through my appcare overpriced plan.
    6) DeAuthorized and Authorized under iTunes>store.
    7) Enabled and disabled Genius .
    8) Only synced 1 music folder, then 3 successfully then a few more and it then crashes so that's why i think it has something to do with the music. Almost as if it takes a while to complete a sync it kills iTunes.
    9) Tried a different USB Cable.
    10) Tried a different powered USB hub and directly hoooking it to my computer.
    11) Syncing without music (which works) then re-enabling sync of music and it crashes again.
    I am running Windows 7 64bit
    4 GB Ram
    AMD Athlon 64 X2 Dual Core Processor 6000+ 3.00 GHz Processor
    Problem Details From the Error Message:
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 9.2.0.61
    Application Timestamp: 4c18061b
    Fault Module Name: iTunes.dll
    Fault Module Version: 9.2.0.61
    Fault Module Timestamp: 4c1805f8
    Exception Offset: 0004be7e
    Exception Code: c0000409
    Exception Data: 00000000
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 1033
    Additional Information 1: aa6f
    Additional Information 2: aa6f7ff37cc83e62dd19c7f74480fe80
    Additional Information 3: 8801
    Additional Information 4: 88012a8754f4edce372af04f7fa7bbf3
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    Thanks
    -Onyxius

    love paying a lot of money for something that doesn't work right, thanks apple

  • Error message:  Adobe InDesign CS5 has stopped working

    Hi,
    I am having a strange problem.  When I open an InDesign file, I get the error message above.  Then windows is looking for a solution.  I close the window and reopen the file and it opens right up.  This problem does not occur if I open InDesign first then open the file.  Only when I try to open the file and InDesign starts to run.  I am running Windows 7 64bit.  Any ideas out there?

    After an uninstall of InDesign and the antivirus software, no solution to the problem.  I went into the startup menu and started doing selected start ups.  I was able to narrow down the conflict to the "windows management instrumentation" program.  When this is not running, I get the message that my ID has reached its activation limit and I need a new number or it needs to be deauthorized on at least one computer.  There are a couple of other programs that need WMI to run as well.  I did go in and delete the preferences since nothing I had was hard to recreate.  Can the other files in the cache be deleted as well?  Will ID look for them and recreate them such as the one in the recovery folder?  Anyway, I had one document that I have been working on be rescaled-very strange.  Everything else was unchanged.  One other thing, when I would get the error message, I would close and then reopen the document without any problem.  However, when I closed it again, even if all i did was view it without changing anything, I would get the prompt if I wanted to save the changes.
    So does that help at all in narrowing down the problem?  I have reinstalled the antivirus, and it did not affect anything.  As long as I don't run WMI, I don't get the error message.
    thanks,
    Clark

Maybe you are looking for