Global vs local attributes
Hi Folks,
How does one go about making attributes - local and global ?
Regards,
Vinay
Hi Vinay,
Attribute is global or local will depend on at which level you are adding the attributes in your taxonomy mode. If you are adding your attribute at root then it will be global as it is applicable to whole tree beneath and if you are adding them at a particular node in a tree it will be applicable to all its descendents.
Note: However attribute that is global should be modeled as a field as it is appicable to all the records.
Hope this helps.
Regards,
Pooja
Similar Messages
-
Local attributes - global attributes tradeoff
Hi, MDM experts.
Can you, please, share your experience on business partners repository modeling.
I build custom business partners repository. While creating it I came to a question - whether local system attributes of business partner should be modelled in that repository?
Intrinsic attributes like Full Name, State Identity Number and so on should be definitely modeled. Attributes specific to our organization but those that span many of our systems should also be modeled I think.
But what's about some specific attributes that are relevant only for one of the systems being integrated? To be concrete, imagine we have SAP ERP system as one of the systems in landscape and such attribute of our business partner as 'Purchasing organization'. In our case this table is SAP ERP specific and none of our other systems have such entity in their data model.
<b>The question is - is it reasonable to have local system attributes and lookup tables implemented in central MDM repository?</b>
If yes then isn't our repository going to be overloaded with all that local attributes and lookup tables of every client system?
If no, then how should process of central creation of business partner look like? The problem is in this case Creator won't be be able to assign all attributes he would like to and he will have to login to each of local system and assign these values after central creation. Moreover, client systems can refuse to create new record automatically in case some of attributes are missing. For example such situation is typical for Idoc inbound processing .
Have you any suggestions on streamlining the data model and BP central creation process ?
Regards,
Vadim KalabinHi vadim,
These are my thoughts on your issue.
I feel both the attributes should find place in the same repository.
This is not going to overload the system. In some typical MDM Implementation the volume of Main table records will very huge and the Local and global attributes will only occupy a less share only on the total records.
Also the practice is that MDM DB Server and the core server runs separately.
Pl find if this Article is use for you.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0d8aa53-b11d-2a10-aca2-ff2bd42a8692">MDM Data modelling do's and dont's</a>
Regards,
Vijay -
Help! .TMIB service not returning local attributes
I've the following src to create a an FML request buffer with TA_FLAGS set to MIB_LOCAL...
FBFR32* buf = (FBFR32*)tpalloc("FML32", NULL, 1024);
Finit32(buf, Fsizeof32(buf));
long flags = MIB_LOCAL;
Fchg32(buf, TA_OPERATION, 0, "GET", 0);
Fchg32(buf, TA_CLASS, 0, "T_QUEUE", 0);
Fchg32(buf, TA_FLAGS, 0, (char*)&flags, 0);
Fchg32(buf, TA_RQADDR, 0, qaddr, 0);
FILE* f = fopen(dumpfile, "a");
Ffprint32(buf, f);
long len;
tpcall(".TMIB", (char*)buf, (long)0, (char**)&buf, &len, 0);
Ffprint32(buf, f);
fclose(f);
Which produces the following output in the dumpfile...
TA_FLAGS 65536
TA_CLASS T_QUEUE
TA_OPERATION GET
TA_RQADDR LMQ
TA_ERROR 0
TA_MORE 0
TA_OCCURS 1
TA_GRACE 60
TA_MAXGEN 3
TA_MSG_CBYTES 0
TA_MSG_QBYTES 65536
TA_MSG_QNUM 0
TA_RQID 52527126
TA_SERVERCNT 1
TA_WKQUEUED 0
TA_CLASS T_QUEUE
TA_STATE ACTIVE
TA_CONV N
TA_RCMD
TA_RESTART Y
TA_RQADDR LMQ
TA_SERVERNAME <ommitted>
TA_SOURCE <ommitted>
TA_LMID slc00caq
Note the lack of local attributes. I have analogous src to query local attrs of the T_SERVER class which works fine. Any ideas on why I'm not getting T_QUEUE local attrs?Michael,
The local attributes in the T_QUEUE class aer TA_TOTNQUEUED, TA_TOTWKQUEUED, TA_SOURCE, TA_NQUEUED, and TA_WKQUEUED.
TA_WKQUEUED and TA_SOURCE are being returned as part of the result.
For TA_TOTNQUEUED the TM_MIB(5) manual page T_QUEUE class definition lists the following limitation:
Limitation: If the T_DOMAIN:TA_LDBAL attribute is "N" or the T_DOMAIN:TA_MODEL attribute is "MP", TA_TOTNQUEUED is not returned. In the same configuration, updates to this attribute are ignored. Consequently, when this attribute is returned TA_LMID and TA_SOURCE have the same value.
There is a similar limitation listed for TA_TOTWKQUEUED and TA_NQUEUED. That is why you are not seeing those 3 attributes in the result.
Regards,
Ed -
Local Attributes of the T_SERVER Class
What's the secret to getting the attributes listed as "local" in the MIB doc? I have some simple code to do GETs and then dump the contents of the receive buffer. Everything works nicely except I can't seem to get any of the "local" T_SERVER Attributes. I have tried setting the MIB_LOCAL flag. I have tried specifying the local attributes in a filter. All to no avail.
This snippet...
FBFR32* fmlbuf;
if ((fmlbuf = (FBFR32*)tpalloc("FML32", NULL, 10000)) == NULL)
cerr<<"ERROR: mibget: tpalloc: "<<tpstrerror(tperrno)<<endl;
return;
if (Finit32(fmlbuf, Fsizeof32(fmlbuf)) == -1)
cerr<<"ERROR: mibget: Finit32: "<<Fstrerror32(Ferror32)<<endl;
tpfree((char*)fmlbuf);
return;
Fchg32(fmlbuf, TA_OPERATION, 0, "GET", 0);
Fchg32(fmlbuf , TA_FLAGS, 0, (char*)MIB_LOCAL, 0);
Fchg32(fmlbuf, TA_CLASS, 0, (char*)tclass.c_str(), 0);
long len = -1;
if (tpcall(".TMIB", (char*)fmlbuf, (long)0, (char**)&fmlbuf, (long*)&len, (long)0) == -1)
cerr<<"ERROR: "<<tclass.c_str()<<": tpcall: Error "<<tperrno<<" "<<tpstrerror(tperrno)<<endl;
tpfree((char*)fmlbuf);
return;
string path = "c:\\temp\\";
path.append(tclass);
path.append(".log");
FILE* f = fopen(path.c_str(), "a");
Ffprint32(fmlbuf, f);
fclose(f);
tpfree((char*)fmlbuf);
Prints the following 38 fields for each server occurrence when tclass=T_SERVER...
TA_BASESRVID 1
TA_GRPNO 30002
TA_MAX 1
TA_MAXGEN 0
TA_MIN 1
TA_PID 6256
TA_RPID 1537
TA_RPPERM 432
TA_RQID 1537
TA_RQPERM 432
TA_SEQUENCE 0
TA_TIMERESTART 1322356429
TA_TIMESTART 1322356429
TA_MINDISPATCHTHREADS 0
TA_THREADSTACKSIZE 0
TA_MAXQUEUELEN -1
TA_SRVID 0
TA_MAXEJBCACHE 0
TA_EJBCACHE_FLUSH 0
TA_CLASS T_SERVER
TA_STATE ACTIVE
TA_CLOPT
TA_CONV N
TA_ENVFILE
TA_RCMD
TA_REPLYQ N
TA_RESTART Y
TA_RQADDR 43349
TA_SERVERNAME c:\\Oracle\\tuxedo11gR1_VS2010\\bin\\BBL.exe
TA_SYSTEM_ACCESS FASTPATH
TA_SEC_PRINCIPAL_NAME
TA_SEC_PRINCIPAL_LOCATION
TA_SEC_PRINCIPAL_PASSVAR
TA_SICACHEENTRIESMAX 0
TA_LMID SLC00FDG
TA_SRVGRP
TA_SRVTYPE
TA_CONCURR_STRATEGY
Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level (none) running on Microsoft Windows Server 2008 R2 Enterprise 6.1.7601 Service Pack 1 Build 7601.
What am I missing?Answering my own post. What I was missing was the '&' in front of MIB_LOCAL. Chalk that one up to a stupid typo.
-
Map LDAP/eDir "Language" and Vibe "Locale" attributes ?
Hello,
We can map a lot of LDAP/eDir user attributes with the Novell Vibe user attributes.
Now, I would like to know if it is possible to map the "language" attributes ?
The idea is to get the user "language" attribute from eDir and, based on it, to configure the Vibe "Locale" attribute ....
Tx for your help ...
Stephanspauwels,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Shall I use global or local variables for my program?
Hello,
1) I am using 2 while loops in parallele. One 50 ms timed and the other one 1000 ms. The 50 ms one gets data from a sensor. I want to display that data every 1000ms in the 1000 ms loop. I have used global variables to do that. Should I better use local variables?
2) This question deals with the VI I have attached
a) Shall I initialise the " Quitter programme " global variable in the main VI aswell ? Or is what I have done enough?
b)
I want the sequence to continue ( finishes the last sequence and goes back to the first one without any delay if possible ) until the user presses Quit. I am concerned about the " wait until " icon of the exterior main while loop ( set to be 250 ms at the moment ). This time, 250 ms, is the time it takes between the end of the last sequence and the beginning of the first sequence? Is that right? Once u start the first sequence, the while loop doesn’t do anything until the end of the last sequence ( my 3 sequences can take several minutes ) ?
Hope I am clear… lol
Don’t hesitate to ask any questions if not clear enough
thanks a lot,
David
Attachments:
Example1.zip 28 KBBonjour Marc. You will definitely have a race condition because you are writing to the global in a parallel loop. You could click the stop button in the quitter program, then before it is read in the main loop, the lower loop writes a false to it, and your click is lost. Why do you want a separate quitter program? You may have a good reason but it isn't clear here. I would not use globals or locals for this, just put your stop button on the main vi. You already have one, so why do you want another one in another vi? If you must do it this way, eliminate both lower loops. They are not necessary. The global default is set to false, so when you run the vi, it is false. The button mechanical action is set to latch when released, so after clicking it will turn true until the main vi reads it, then it will automatically turn false. So you don't need the lower loops to keep writing false to it. If you just eliminate both lower loops, it will work fine. The only purpose I could see for the quitter vi is to have one button cause several vi's to stop. Instead of doing it this way, put one stop button in your main vi, create a reference (right click - create - reference), and wire this reference into all subvi's that the main calls. The subvi's must be changed to accept the reference and use it. This would be a much better method to close all vi's with one button.
You could also get rid of the sequence structure (it hides code and makes it more difficult to read). Just put all your code side by side. The error in/out wire will ensure that the execution order will be fixed, just like in your first sequence with the open file and write file functions. Just wire the error out of the write vi to the second write vi, and then the error out of the second write vi to the close vi. No sequence structure needed, and all your code is viewable on one screen.
- tbob
Inventor of the WORM Global -
Hi Gurus, I was unable to see where I can define local and global variables? I see that help.sap.com documentation but where do I create. All variables that I create, are global because, they are visible to all and they all can use it? Any help would be greatly appreciated.
As far as I know, Variables are re-usable objects that are not dependent upon InfoProvider. When I look at this link
http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db07d555411d189660000e829fbbd/frameset.htm
it talks about Global and Local variable? Is this different than what we use in Query Designer? -
Hello everyone.
I have a problem that has to do with all types of ELF files, not only drivers:
If I load a kernel module (in my case a misc module that is referred by other modules) all global symbols of my module become global kernel symbols. As I do not want to become all symbols global kernel symbols I look for a possibility to change global symbols into local ones.
As the module is made from different object files I cannot just make all functions "static" in the C compiler; the symbols need to be global until the final "ld -r" step.
Example:
- "a.o" contains a symbols which are used by "b.o". Therefore the symbols must be global.
- The kernel module is made by "ld -r a.o b.o .... -o output.o".
- As the symbols should not be used outside "output.o" I want to change them to local symbols.
I thaught about writing a program that:
- Makes all global symbols local but "undefined" (extern) symbols and symbols I want to be global (e.g. _init).
- Modify relocations (relocations to local symbols may cause problems)
- Rearrange the symbol table (global symbols must follow local ones)
- Update the relocations again (due to new symbol table order)
Is there a program that can make global symbols local or do I have to write such a program myself ?
Thank you very much.
Martin D. J. RosenauModify relocations (relocations to local symbols may cause problems)I found out that Sun variant of "ld" as well as "modload" accept relocations to local symbols.
This made writing the program very easy as the three other steps (making global symbols local, rearranging the symbol table and changing the symbol numbers in the relocation tables) are quite simple compared with modifying the relocations. -
Change Location to Global from Local
Hi
I am using R12 and have this issue:
I need to change a location which is local to Global. I am unable to do do this using HR manager responsibility. It shows that field is protected against update.
Is there any wayout to achieve this? Can we also change a location from Global to Local?
Please help.
Regards
SangeetaHi,
Please see these docs.
Is It Possible To Update the Address Style Field on the Location Screen (PERWSLOC) Once the Location Is Saved? [ID 549448.1]
Understanding Employee Address and Location Address within Oracle Human Resources (HRMS) [ID 469674.1]
Thanks,
Hussein -
SPED PIS/COFINS - Plano de contas Global e Local.
Olá Pessoal,
Após aplicar todas as notas referentes ao SPED PIS/COFINS começei rodas os arquivos e validá-los, porém uma das primeiras coisas que encontrei foi aqui estamos utilizando o plano de contas Brasil(ACBR) e temos o plano de contas global(PCOA), pela legislação brasileira para o envio do arquivo pelo menos para o SPED ECD tivemos que mandar as contas do plano de conta local(ACBR) com as contas alternativas, ou seja, apenas contas sem letras. Porém hoje quando rodo o SPED PIS/COFINS hoje nos registros 0500 e F100 as contas que estão sendo carregadas são as contas do plano de contas global e não as contas alternativas.
No SPED ECD existe um flag que podemos usar para as contas alternativas, nesse SPED PIS/COFINS não deveriamos ter também ???
Obrigado,
Michael PerettoBom dia Vini,
Não está usando o report standard, está?
O módulo de formatação no standard cuida disso independente do usuário:
WHEN 'P'.
* --- Change decimal separator and delete spaces
REPLACE '.' WITH ',' INTO lv_field.
CONDENSE lv_field NO-GAPS.
Atenciosamente, Fernando Da Ró -
Hello Friends,
I need to store some additional information in the DFF of OE_ORDER_HEADERS_ALL.
The problem is that, all the columns from attribute1 to attribute20 have already been used. It has been observed that, there are some TPATTRIBUTES 1 to 15 as well as Global attributes.
Only thing which I understood is, TP and Global attributes are used for country specific and localizaiton purposes, however since we are not using Trading partner, and these columns are free.. Is it feasible (without any impact) to use them? and in that case, Will the form of Sales Order show these additional DFFs?
I tried to check, however Global attribute DFF was not found on the form , for TP attributes, it was found but was covered by field Order Source .. Any suggestions?
Best RegardsHi
Extended attribute :-
Group of attribute value hold this values .
from 001 to 10000 - product category . you can mention
otherwise PRCAT = 001 ,002......10,000 you have to make one by one single entry.
hope you understand now the use of extended attributes.
br
muthu -
How to change Variant in Code inspector from Global to local.
Hi,
I have created my own variant,object set and inspection through T-code SCI and this has been created only for my id.
Now when i go to SE38 and run Code Inspector i want the CI to use my variant instead of the Global DEFAULT variant.
Kindly tell me how can i change from DEFAULt to my Local Variant.
Many Thanks.Hi,
abap_learner_das wrote:
> Now when i go to SE38 and run Code Inspector i want the CI to use my variant instead of the Global DEFAULT variant.
in that case you have to create a variant called "DEFAULT" as your local one. That variant will be used in SE38.
In SE38 you can only use the DEFAULT variant. either the global one (if your user does not have a local one named DEFAULT) or the local one of your user.
HTH,
Hermann -
CSS11000 global v. local and remote load balancing?
I understand the practice of local LB on the CSS. I do not understand the same for remote LB. I have two mutually exclusive DMZs, but with the same content at each site. How does the CSS at site A know if content at site B? Site B's CSS tells it via the app session, right? Why can't I see that in the summary of service at site A's CLI?
Houston side:
!Active version: ap0502003
!*************************** GLOBAL ***************************
bridge spanning-tree disabled
dns-server zone 1 tier1 "zone1" roundrobin
dns-server
dns-record a www.midcon.com 12.155.32.98
app session 208.246.87.241 14 authChallenge ************ encryptMd5hash
app
host HOUCSSDMZ 10.43.239.241
ip route 0.0.0.0 0.0.0.0 10.43.236.1 1
!************************** SERVICE **************************
service houauth
ip address 10.43.232.98
active
service houweb3
ip address 10.43.232.99
keepalive type http
active
service houweb4
ip address 10.43.232.100
keepalive type http
active
service lkw_midcon_sorry
ip address 208.246.87.98
keepalive type none
active
!*************************** OWNER ***************************
owner midcon.com
dns both
dnsbalance preferlocal
content dns
protocol udp
port 53
add service houauth
vip address 10.43.236.98
balance leastconn
add dns www.midcon.com
active
content www
vip address 10.43.236.98
balance weightedrr
add service houweb3
add service houweb4 weight 2
protocol tcp
port 80
url "/*"
primarySorryServer lkw_midcon_sorry
active
Lakewood side:
!Active version: ap0502003
!*************************** GLOBAL ***************************
bridge spanning-tree disabled
dns-server
app session 12.155.32.241 14 authChallenge ************ encryptMd5hash
app
host LKWCSSDMZ 208.246.87.241
ip route 0.0.0.0 0.0.0.0 208.246.87.1 1
service hou_midcon_sorry
ip address 12.155.32.98
keepalive type none
active
service lkwauth
ip address 10.34.232.98
active
service lkwweb4
ip address 10.34.232.99
keepalive type http
active
!*************************** OWNER ***************************
owner midcon.com
dns both
dnsbalance preferlocal
content dns
protocol udp
port 53
add service lkwauth
vip address 208.246.87.98
balance leastconn
add dns www.midcon.com
active
content www
balance leastconn
add service lkwweb4
vip address 208.246.87.98
protocol tcp
port 80
url "/*"
primarySorryServer hou_midcon_sorry
active
HOUCSSDMZ# sh app
APP CONFIGURATION:
Enabled PortNumber: 3699 MaxFrameSize: 10240
HOUCSSDMZ# sh app sess
App Session Information 'no hostname':
Session ID: 83c381a0 IP Address: 208.246.87.241 State: APP_SESSION_UP
HOUCSSDMZ# sh serv summary
Service Name State Conn Weight Avg State
Load Transitions
houweb3 Alive 0 1 2 12
houweb4 Down 0 1 255 15
houauth Alive 0 1 2 0
lkw_midcon_sorry Alive 0 1 2 0
[email protected] Alive 0 1 2 0
LKWCSSDMZ# sh app
APP CONFIGURATION:
Enabled PortNumber: 3699 MaxFrameSize: 10240
LKWCSSDMZ# sh app sess
App Session Information 'no hostname':
Session ID: 859f39f0 IP Address: 12.155.32.241 State: APP_SESSION_UP
LKWCSSDMZ# sh serv summary
Service Name State Conn Weight Avg State
Load Transitions
lkwauth Alive 0 1 2 8
lkwweb4 Alive 1 1 2 30
hou_midcon_sorry Alive 0 1 2 0
[email protected] Alive 0 1 2 0
As you can see the DNS service is peering. I don't understand why the HTTP is not. Hopefully I haven't deleted too much information. I setup the sorryservices recently per the suggestion of TAC, but I don't agree with that recommended solution. -
Converting from global to local filesystem
Hi all, I have a 2-node cluster running Sun Cluster 3.2 in which multiple file systems are currently marked as global file systems (ie the file systems are visible from both nodes and they all have the "global" keyword in /etc/vfstab). I've been requested to turn these (global) file systems into "local" file systems.
Is this done by removing the keyword "global" from /etc/vfstab for each file system on both nodes and then rebooting each node?
Thanks in advance,
StewartHello,
yes, by removing the global flag until the next mount of that vfstab entry.
You can check it in the output of the mount command for that FS.
HTH,
jono -
Is This a Global Versus Local Variable Problem?
I intend to use a variable (myselector) with a text value (e.g. roses, Big Sur, Pacific Grove, night, etc.) for the sort criteria of my photography list. Selection of a tab from a Tabbed Panel will appropriately define the variable and the selected thumbnails will display in the Content Panel.
The variable "myselector" is defined in the head section; a function for each tab of the Tabbed Panel will redefine the variable per the selected tab. Within the function, I am not using "var" to call the variable. Though the variable "myselector" should be global, the changes to its value are discarded when the function closes. This indicates that it is functioning like a local variable in the function. After a bit of reading, I've not found the cause of the global/local discrepancy or a fix for it.
Diagnosis History - I generated a simplified code. Variable "myselector" is defined as "abcd"; function "myfilter" is called by onclick of the text "button" and changes "myselector" to "efgh". At the end of the file, I used "document.write (myselector) to output the "myselector" value. The script follows.
The end value of "myselector" does not change. However, when I add "document.write (myselector)" to the function, then the changed value is displayed.
I ask someone to explain what I am doing incorrectly or, at least, guide me to a solution. I thank you for your assistance.
Scott
<script type="text/javascript">
var myselector="abcd";
function MM_callJS(jsStr) { //v2.0
return eval(jsStr)
</script>
</head>
<body>
<div id=text>
<p onclick="MM_callJS('myfilter();')">Button</p>
<script type="text/javascript">
function myfilter() {myselector="efgh"; }
</script>
<script type="text/javascript">
document.write (myselector);
</script>
</div>Dear Ben:
I thank youfor your patience. This includes the script using Insert - Syntax Highlighting - Java.
The coding needs a lot of clean up but I want it to work, first.
Scott
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<script type="text/javascript">
var dsphotodata = new Spry.Data.XMLDataSet("EM_photo.xml", "/gallery");
</script>
<script type = "text/javascript">
function MM_callJS(jsStr) { //v2.0
return eval(jsStr)
</script>
<script type="text/javascript">
var dsphoto = new Spry.Data.XMLDataSet("EM_photo.xml", "/gallery/photos/photo");
dsphoto.filter(subjectfilter);
var myselector;
</script>
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
</head>
<body>
This is a test of Scott's efforts to program his website.
<br />
<br />
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
<li class="TabbedPanelsTab" tabindex="0" onclick="MM_callJS('{myselector=\'animal\'}; subjectfilter(); dsphoto.filter(subjectfilter); ')">Tab 1</li>
<li class="TabbedPanelsTab" tabindex="0" onfocus="MM_callJS('myselector=\"pgbeach\" subjectfilter(); dsphoto.filter(subjectfilter); ')">Tab 2</li>
<li class="TabbedPanelsTab" tabindex="0">Blank</li>
</ul>
<div class="TabbedPanelsContentGroup">
<div class="TabbedPanelsContent" >Content 1
<br />
<br />
<script> {document.write (myselector)} </script>
<br />
<div spry:region="dsphoto dsphotodata"> <img src="{dsphotodata::thumbnail/@base}{@thumbpath}" width = {@thumbwidth}px height = {@thumbheight}px spry:repeat="dsphoto" onclick="dsphoto.setCurrentRow('{ds_RowID}');" /></div>
</div>
<div class="TabbedPanelsContent">Content 2
<script> {document.write (myselector)} </script>
<br />
<div spry:region="dsphoto dsphotodata"> <img src="{dsphotodata::thumbnail/@base}{@thumbpath}" width = {@thumbwidth}px height = {@thumbheight}px spry:repeat="dsphoto" onclick="dsphoto.setCurrentRow('{ds_RowID}');" /></div>
</div>
<div class="TabbedPanelsContent">Content 3 <script> {document.write (myselector)} </script><br />
<div spry:region="dsphoto dsphotodata"> <img src="{dsphotodata::thumbnail/@base}{@thumbpath}" width = {@thumbwidth}px height = {@thumbheight}px spry:repeat="dsphoto" onclick="dsphoto.setCurrentRow('{ds_RowID}');" /></div>
</div>
</div>
</div>
<div id="Selected_Photo" spry:detailregion = "dsphoto dsphotodata" >
<img src="Photo-Thumbnails/{@thumbpath}" width = {@thumbwidth}px height = {@thumbheight}px /><br />
<img src="Photo-Email/{@path}" width = {@width}px height = {@height}px />
</div>
<script type="text/javascript">
var subjectfilter = function(dataSet, row, rowNumber, criteria) { if (row["@subject"].search (myselector) != -1) return row; return null; };
<!--
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab:2});
//-->
</script>
Maybe you are looking for
-
How to boot always from a firewire disk?
Hello, I hope someone can help me on this. My HD is almost dead and it's making a lot of noise. I have managed to create a boot disk on an external disk connected through Firewire. What shall I do now to have the HD definetly unmounted and have the b
-
Why does my finder restart each time i try to open a folder ?
Hi, Since today, everytime I click on a folder or try using the Finder, the color wheel appears, takes a few seconds, then relaunches the finder. However, I can't access any of my files through Finder. I can access them using any program, but not wit
-
Connection authentication error occured
Hi, i'm using netbeans 6.8 and java DB ClientDriver.I want to insert data into database table, so after inserting data into required fields and by clicking on submit button it is displaying the message as :Connection authentication failure occurred.
-
Hello all , I have a problem that i have a master detail page , the master have 4 LOV fields which based on the same VO with 4 where conditions , so i have implemented the view object impl class to change the where clause upon the source of the LOV.
-
***NEED HELP. ERROR CODE -1450***
iTunes wont save any of the songs i import!!! i have made a back up disk of the music library and when i restore all the songs a screen pops up with n error code-1450. what can i do to fix the problem???? i alreary downloaded the new version of iTune