Graphics problem mac book pro late 2011 model

I have a mac book pro late 2011 model.my screen gets grey after the apple logo pops up and freezes and it becomes extremly hot.as my mac was out of warranty i gave it for repair but it didnt resolve as it was a graphics problem.later on i came to know that a lot of mac book pro late 2011 model users have the same problem.will apple change the logic board for me as its just two years old and i paid around  Rs.120000 for that mac and now i am not able to use it.i saw the logic bard price and its like Rs.45000 which is like too expensive.i dont know what to do? i came across a forum saying apple will replace the logic board for free if its graphics related issues for mac book pro late 2010 model if its within 3 years from the date of purchase. here is the link .
http://support.apple.com/kb/TS4088?viewlocale=en_US
I am a student and it took much time and money to buy that mac.please let me know if someone can help me replacing the logic board.its just two years old and as new as i bought. pls help

You're having the problems as discussed in this -> https://discussions.apple.com/thread/4766577?tstart=0 - thread. There is no scheme to replace the logic boards as there was for the 15" mid-2010 model. Depending on where you are and what consumer rights you may have under the laws of your country, Apple will likely want to replace the logic board (at a substantial cost). The best 'fix' for the problem at this time is to have the GPU BGA reballed back onto the logic board.
Take a look at the thread and see if you've the same problems - it only affects 15" and 17" 2011 models, not the 13" model. If you've the 13" model, you have a different problem.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

Similar Messages

  • HT201364 Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machin

    Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
    Brian

    Welcome to Apple Support Communities
    You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
    You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
    Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

  • Printer proxy quit unexpectely message on mac book pro late 2011  os 10.8.2

    I cannot print from my computer,I have always this message: Printer proxy quitted unexpectely message.I can print from my ipad,my iphone wireless but not with my mac book pro late 2011 vers. 10.8.2.Also I have VMWAre software with windows 7 and not possible anymore.
    It was working and now nothing
    Thank you

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter the name of the crashed application or process (PrinterProxy) in the Filter text field. Select the messages from the time of the last crash, if any. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Can mountain lion be installed on mac book pro late 2011 4gb memory?

    can mountain lion be installed on mac book pro late 2011 4gb of memory and how?

    This page tells you the requirements to install Mountain Lion:
    http://www.apple.com/support/osx/getstarted/
    Check it. It also describes how to install Mountain Lion.

  • Mac book pro late 2011 not starting up

    Hi there,
    I have a late 2011 Mac Book Pro 15 ".  It will no longer start up, looks dead, machine is fully charged and I simply put it to sleep.  Now I noticed that the magsafe charger is no longer displaying a light.
    Any ideas here, its out of warranty, not looking forward to a huge repair bill.
    Thanks,
    AJ

    Some power adapters can at times be wiley and show no light but stll be functioning, though that is rare.
    I assume that you pressed the power button on side of the MBP where the battery charge level is displayed. 
    If the battery has a charge, it should start up unless there is another issue preventing it.  Likewise a MBP should work with the power adapter attached regardless of the battery status.
    Try the SMC reset again.  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.  If it is a simple fix, it may be done gratis.  At any rate, you will know the exact situation and then make an informed decision.
    Ciao.

  • Unable to install CS6 master collection for mac book pro(late 2011)

    Recently, I have successfully downloaded Adobe creative suite CS6 master collection for MAC.
    However, I am unable to install it. After opening the installer nothing happens, it does not proceed further. I have tried copying the contents from MasterCollection_CS6_LS16.dmg to another folder and then open the install.app, still no progress.
    Please advice since I really need to install this.
    Screenshot below:

    Hey Vikrant thanks for the response.
    The situation is like this, I downloaded the image on my desktop pc(which is windows) and then compress & split the image using a winrar. I then transferred the files to my mac book pro and extracted the image there. Unfortunately, there was a bug in the unarchiver software that I was using on mac to extract the image.
    This bug was rectified today in a update given out by the dev.
    Now, I can install CS6 without any issues. Thanks for the repsonse once again.

  • How to mirror my mac book pro late 2011 on apple tv

    the air play icon on my menu bar wont display. I have updated my sofware, restarted my computer, turned on Home Sharing and both my Mac and Apple TV are on the same network

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • Graphic problems with Macbook Pro Late 2011 13"

    I'll try to explain it as clear as possible. This started to happen a couple weeks ago:
    My Macbook screen started to being white-blurred, and the image slows down while this happen. At first I thought that was happening randomly, but then -I guess- I realised that it was lid-related; when I open the lid more than 90 degrees the problem started to happen, sometimes it starts to happen even if the lid is in its 'working fine area' though , but after moving the lid up and down several times, it gets 'fixed'... until it happens again. There are times when it doesn't get fixed instantaneously, and it's really driving me crazy.
    My first thought was that it might be the flex (not sure if this is the right name of it tough), I mean the cable that goes from the screen to the logic board. If so, or even in another case scenario, I have an Early 2011 Macbook Pro 13" where I can use any part, except for the logic board, if needed.
    Thanks in advance.

    Well the Apple logo will always be visible through the screen when there is a fairly bright light behind the screen.
    That is totally normal.
    As for the freezing and since this is your first Mac computer I would like to make you aware of one thing.
    The way Mac OS X operating system works is slightly different then Windows. In Windows when you click the X in the upper right hand corner of the program you are using that program closes freeinig up the memory it was using. In the Apple OS, OS X, when you click the X in the upper left hand corner of the windows you are using all that does is close that active window. It dos not close the program. So if you have started up 2-3-4-5-6 programs to do something in them and then clicked the X all you have done is closed those windows for all those programs. The programs is still running. So you can end up with several programs using memory when they shouldn't be. You have to actually close those program by first using Command+Tab to see what programs are still open then go to the menu bar on the right side where the name of the program is displayed and click on that name and select Quit Program Name. Or once the name of the program is in the menu bar press Command+Q (Quit) to close that program.
    Get in the habbit of always using that keyboard shortcut when you are done using a program.
    Having multiple program open will cause the system to run slow.
    The hard drive Apple is putting the newer Macbook Pros are of the slower type. Running at 5400RPMs as opposed to the faster 7200RPM models. Why I don't know as the faster drives don't cost that much more. Because of this all program run slightly slower. To open, to save files to and when used as a swap disk to expand on the physical memory in the computer. Which in turn will make the system seem sluggish and can casue some freezes.
    So make sure you have closed all programs before opening another, and only have at the most 2-3 progams open at the same time.

  • Suddenly Shut Down my mac book pro, late 2011

    Hello guys, i need your help.
    Last 2 weeks, suddenly my macbookpro shut down, and it makes me shock.
    After a few second shut down, i try to turn it on.
    it just make sound like turn on your mac and suddenly shut down again.
    It shut down for 3 times and more.
    When i plug in the charger, it turn on.
    But after i unplug the charger it suddenly shut down again.
    i try to shut down my mac properly, and when i turn on again it works.
    My friends say that it could be my battery, i checked it, and my battery was normal.
    And i search about this issue, some people say to reset SMC, i dont know if it would works or not.
    Did reset SMC will makes you lose you data or something?
    Now, i must plug the charger when i want to turn on my mac.
    Did this a serious problem or not? i need you advice guys.
    Thanks!

    No data is lost due to resetting the SMC.
    But after i unplug the charger it suddently shut down again
    The problem may be the adapter. Try here > Apple Portables: Troubleshooting MagSafe adapters
    Hopefully your important files are backed up just in case.

  • Installing windows 7 on mac book pro late 2013

    Installing Windows 7 on Mac Book Pro Late 2013
    Background
    Mac Book Pro Late 2013 uses a USB 3.0 hub for the external ports, the keyboard and mouse devices.
    Windows 7 does not have the drivers to support USB 3.0 ports so these must be integrated into the boot.wim and install.win files so that Win7 can be installed and used on a Mac. If these drivers are not integrated when win7 is booted up then the mouse and keyboard will not function.
    Requirements:
    Two USB Flash drives
    Access to a Mac computer
    Bootcamp Assistant application
    Access to a Windows computer with windows 7 installed
    Windows 7 install disk or ISO file
    WinUSB application
    Windows Automated Installation Kit for Windows 7 (WAIK)
    Method
    On a Mac
    First prepare a USB Flash drive by formatting it using disk util app, found in Application Utility folder, to FAT format this will store the Apple drivers that can be downloaded from Apple using BootCamp.
    This will be called USB1
    Using Boot Camp Assistant select 'Download the latest windows support software from Apple'  to get the files from apple for win7 for your particular machine these will be downloaded and copied to the USB Flash drive called USB1.
    On a PC
    Using a PC download a copy of WinUSB from  www.joshcellsoftwares.com this software can create a bootable USB with the win 7 files copied on to it.
    Obtain a copy of Windows 7 either in DVD or ISO format.
    Using WinUSB and the Win7 DVD create a second bootable USB Flash drive. This will be called USB 2.
    About DISM
    DISM is a windows application that allows the editing of windows image files with the extension of WIM.
    If DISM is not installed on the PC it can be downloaded from windows website.
    To test to see if DISM is installed, open up a command prompt. Then type 'dism' without the quotes this will display the help description of DISM. 
    Drivers
    The apple drivers need to be added to the boot.wim file so that mouse and keyboard can function during the setup phase.
    The apple drivers need to be added to the install.wim so that mouse and keyboard can function after the setup phase.
    The video drivers are also added as it appears to cause problems if they are not included.
    Create a directory structure like this:
    c:\appleboot\
    drvrs
    mount
    win7x64install
    win7x64boot
    Create the following files in c:\appleboot\ with the following code:
    adddrivers.cmd
    color 0a
    dism /image:c:\appleboot\mount /add-driver /driver:c:\appleboot\drvrs /recurse
    ================================================================================ ==========
    mountboot.wim.cmd
    color 0a
    dism /mount-wim /wimfile:c:\appleboot\boot.wim /index:2 /mountdir:c:\appleboot\mount
    ================================================================================ ==========
    mountinstall.wim.cmd
    color 0a
    dism /mount-wim /wimfile:c:\appleboot\install.wim /index:4 /mountdir:c:\appleboot\mount
    ================================================================================ ==========
    unmountcommitfiles.cmd
    color 0a
    dism /unmount-wim /mountdir:c:\appleboot\mount /commit
    ================================================================================ ==========
    Copy the following files into their respective directories:
    Copy from USB 1 into drvrs the $WinPEDriver$ directory
    Copy from USB 2 \sources\boot.wim to win7x64boot directory, this will store the original file
    Copy from USB 2 \sources\install.wim to win7x64install directory, this will store the original file
    Then copy boot.wim from win7x64boot directory to the c:\appleboot\ directory
    Then copy install.wim from win7x64install directory to the c:\appleboot\ directory
    Once all the copying is completed then run the following cmd files in this order:
    For boot.wim
    mountboot.wim.cmd - this will mount the file for adding of drivers
    adddrivers.cmd - this will add the apple drivers to the mounted boot.wim
    unmountcommitfiles.cmd – this will commit the changes and unmount the boot.wim
    For install.wim
    mountinstall.wim.cmd- this will mount the file for adding of drivers
    adddrivers.cmd - this will add the apple drivers to the mounted install.wim
    unmountcommitfiles.cmd – this will commit the changes and unmount the install.wim
    Copy the files back to USB 2
    Copy the boot.wim and install.wim files from c:\appleboot\ directory  to USB 2 sources directory and overwrite the files.
    BOOTABLE USB
    You will now have a bootable USB Flash Drive that has the additional drivers needed to install Win7 on Mac Book Pro Late 2013.
    Mac Preparation
    On your Mac using Disk Util reduce the size of the partition of Macintosh HD so that there is approx. 80GB free for the use of Win7.
    Add a second partition, label it win7 and format it to FAT. This is so that win 7 setup can identify the correct partition.
    Installing Windows 7
    Insert USB 2 into your Mac and reboot, whilst holding the option key down.
    After reboot there will be three icons displayed one is the Mac operating system, the second is the recovery partition and the third is an orange icon indicating a bootable USB drive.
    Select this and win7 setup application will proceed to boot up with the keyboard and mouse functioning.
    Follow the prompts and when the drive selection appears select the win7 partition and format it to NTFS so that win7 can be installed. When windows setup reboots press and hold down the option key and select the windows partition so that setup can continue to install.
    After completion of installation of win7 insert USB 1 with the additional apple drivers. Goto the bootcamp directory and click on setup.exe file this will install additional drivers needed to use Win7 on a Mac.
    Once completed reboot your Mac and select windows to allow the drivers to update in windows.

    Yes this is correct that the /index:4 refers to the ultimate version of windows in mountinstall.wim.cmd
    dism /mount-wim /wimfile:c:\appleboot\install.wim /index:4 /mountdir:c:\appleboot\mount
    Users should do what applekryzzle suggested if you have a different version of windows. Thanks for the tip applekryzzle.
    With regards to the Intel(R) USB 3.0 eXtensible Host Controller drivers they are the ones that are provided by apple via boot camp assistant.
    These appear to work correctly and downloading as per instructions simplifies the procedure.
    For those that are interesred the updated drivers can be found here https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22824&ProdId=346 7&lang=eng&OSVersion=Windows%207%20%20*&DownloadType=Drivers
    I have also seen in other discussions that some users get black screens i believe that it is the lack of video drivers which is included in the download from apple using boot camp assistant.
    I'm certain that this works on Mac Book Pro Late 2013 models and i feel confident that this will work with other models.
    I will appreciate any feedback if this works on other models.

  • Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

  • I have a mac book pro mid 2011 and it overheats is there any known issue with this model

    overheating issues
    I have a mac book pro mid 2011 and it overheats is there any known issue with this model

    Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
    Clinton

  • I upgrade my MAC BOOK PRO EARLY 2011 and it crash upon login

    Hi,
    I have installed Mavericks os x 10.9.3 to my mac book pro early 2011 and afte that it crash every time I log in.
    I tried many things such as:
    1. I check teh disk health by command +R and it showes green status means it is OK
    2. I tries to safe boot and it worked and I am able to log in and stay in to it ..infact writing this in safe mode ..
    3. I tried moving many of teh thried pary software in trash such as plex, vuze, u torrent etc..and also erazed trash box
    4. I also hide log in items or just mius most od those except TmLogin Mgr that does not allow to minus...I hope you understood this what I did ..simple system pref --> user and group and the login itms are removed
    STILL same issue it crash ever time I log in normally..
    one more point my key board was little damaged may be I say nmber SIX key does not work after little milk spill on this but after that it was unning just fine since last 3 month
    At the end I would like to put this report content ..sorry I know this is not good to put all this crap but it hard to understand if it hide some important infor that help you to suggest me the solution..
    I saw your nice responseall around on the form and I am kind of sure that you will be able to help me with this ..
    Also please tell me how to get back up in sfae mode I connected my external drive but it didnt show up in finder and I tried using time machine but I was nt even able to figure out what to do in that..may be I bi scare of doing trial and error ...
    Thanks. AJ
    Anonymous UUID:       AA3350D8-85AB-5CB5-2E3C-DD7073590DBD
    Thu May 22 22:38:01 2014
    panic(cpu 1 caller 0xffffff80294526ff): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.100.13/osfmk/kern/zalloc.c:461
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80c2c4b1e0 : 0xffffff8029422fa9
    0xffffff80c2c4b260 : 0xffffff80294526ff
    0xffffff80c2c4b2c0 : 0xffffff8029451df9
    0xffffff80c2c4b3c0 : 0xffffff802942aa6f
    0xffffff80c2c4b3f0 : 0xffffff80297d3b84
    0xffffff80c2c4b430 : 0xffffff802978cc6e
    0xffffff80c2c4b4e0 : 0xffffff802978c8cc
    0xffffff80c2c4b560 : 0xffffff80296000c0
    0xffffff80c2c4b5d0 : 0xffffff80295f5a55
    0xffffff80c2c4b6c0 : 0xffffff80295fc756
    0xffffff80c2c4b710 : 0xffffff80295fc25e
    0xffffff80c2c4b790 : 0xffffff80295df064
    0xffffff80c2c4bb10 : 0xffffff80297b5c2c
    0xffffff80c2c4bb70 : 0xffffff80295dfe4b
    0xffffff80c2c4bbc0 : 0xffffff80295f56d0
    0xffffff80c2c4bc00 : 0xffffff80295f149a
    0xffffff80c2c4bd80 : 0xffffff80295e96dc
    0xffffff80c2c4bf50 : 0xffffff8029840653
    0xffffff80c2c4bfb0 : 0xffffff80294f3c56
    BSD process name corresponding to current thread: com.apple.intern
    Mac OS version:
    13D65
    Kernel version:
    Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
    Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
    Kernel slide:     0x0000000029200000
    Kernel text base: 0xffffff8029400000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 93393964240
    last loaded kext at 39308701672: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7fab1e5000, size 28672)
    loaded kexts:
    com.trendmicro.kext.KERedirect          1.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.6.1f2
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.14.15
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.6.1f2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.4f1
    com.apple.driver.ApplePolicyControl          3.5.26
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.iokit.IOBluetoothUSBDFU          4.2.4f1
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.4f1
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleMikeyDriver          2.6.1f2
    com.apple.driver.AppleIntelHD3000Graphics          8.2.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleIntelMCEReporter          104
    com.apple.driver.AppleThunderboltIP          1.1.2
    com.apple.driver.AppleIntelSNBGraphicsFB          8.2.4
    com.apple.driver.AppleMuxControl          3.5.26
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyEventDriver          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.6
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.5.1
    com.apple.driver.AppleUSBHub          666.4.0
    com.apple.driver.AppleSDXC          1.5.2
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
    com.apple.driver.AppleFWOHCI          5.0.2
    com.apple.driver.AppleUSBEHCI          660.4.0
    com.apple.driver.AppleUSBUHCI          656.4.1
    com.apple.driver.AppleAHCIPort          3.0.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleSMBIOS          2.1
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          217.92.1
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          217.92.1
    com.apple.AppleGraphicsDeviceControl          3.5.26
    com.apple.driver.DspFuncLib          2.6.1f2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.7fc2
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOFireWireIP          2.2.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.4f1
    com.apple.driver.AppleHDAController          2.6.1f2
    com.apple.iokit.IOHDAFamily          2.6.1f2
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.7.0d11
    com.apple.iokit.IOSurface          91.1
    com.apple.iokit.IOBluetoothFamily          4.2.4f1
    com.apple.driver.AppleSMC          3.1.8
    com.apple.driver.AppleThunderboltEDMSink          2.1.3
    com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
    com.apple.driver.AppleGraphicsControl          3.5.26
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.4.1
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.4.1
    com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
    com.apple.driver.AppleUSBMultitouch          240.9
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.iokit.IOUSBHIDDriver          660.4.0
    com.apple.driver.AppleUSBComposite          656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
    com.apple.driver.AppleThunderboltNHI          2.0.1
    com.apple.iokit.IOThunderboltFamily          3.2.7
    com.apple.iokit.IOUSBUserClient          660.4.2
    com.apple.iokit.IO80211Family          630.35
    com.apple.iokit.IOEthernetAVBController          1.0.3b4
    com.apple.driver.mDNSOffloadUserClient          1.0.1b5
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBFamily          677.4.0
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 0 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS545032B9A302, 320.07 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Hub
    USB Device: IR Receiver
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

    Removed trend micro smart crap files from disco and it worked.

  • How do I mirror my mac book pro late 2009 to my apple tv

    How do I mirror my mac book pro late 2009 to my apple tv

    Airplay Mirroring requires MacBook Pro early 2011 or later and Mountain Lion or later.

  • Is my mac book Pro 3,1 model compatible with mountain Lion? it was build in 2007 week 28

    Is my mac book Pro 3,1 model compatible with mountain Lion? it was build in 2007 week 28.? Its got the nividia GeForce 8600 w 256 mb graphic card and 4 gig of ram

    ML specifications say Mid 2007
    How to identify Macbook Pro models

Maybe you are looking for

  • Payment adjustment against PDC

    Hi, Our SD person wants to capture PDC(cheque no) received from customer while adjusting the payment (i.e. payment receipt against which cheque no) against Bill.Can anyone plz tell me what standard setting is available to solve this issue or any conf

  • Export field symbol table out of method

    Hi, i have a report, that takes any xml and converts it into a table structure. In a method I generate the table structure using method cl_alv_table_create=>create_dynamic_table. Later in the same method I have filled the content of the XML file into

  • Not Responding When Restoring a Bookmarks File

    After the last Firefox update, lots of bookmarks disappeared, and I tried to restore a .jsonlz4 file. On the bookmarks manager window I choose the file, click on the Open button, the notice asking if I want to replace all the bookmarks comes up and I

  • Dynamic Quorum and new DAG (no CNO)

    With Exchange 2013 SP1 on Windows 2012 R2, you can create a DAG without a CNO.  Which is great, I no longer need a CNO or IP address for my DAGs.  Which should make it much simpler to have a stretched DAG.  However without the CNO, I cannot figure ou

  • How to call ring tones on iPhone?

    Hi guys. I am searching about how to call ringtones from application. Is it possible to make like this application ? Thanks in advance.