Hard drive will not mount with 10.4 but will mount with 10.3

I have a G4 powerbook running on 10.4.11. There is a western digital my book external drive hooked up to the USB port. I have two partitions on it. I tried to change the group settings to read write and got an error saying I did not have permission. Now the first partition will mount, but the second which I tried to change will not mount.
Disk utility sees the drive but it is grayed out. DiskWarrior sees the drive.
I dragged out my old G3 running 10.3.9 and plugged it in. Works great. The disk drive partition mounts and all of the files are there. What do I need to do to get 10.4.11 to mount the disk partition?
The external drive is a Western Digital My Book 250G divided equally into two partitions. The partitions are in Mac extended format.

I'm having pretty much the same problem... Have a WD 500 GB external attached via USB. I can't say for sure that the WD caused this (wasn't paying close enough attention), but I've noticed that my own MacBook HD is no longer mounted. I can't seem to find anyway to accomplish this either. I've booted from another volume to run Disk Utility (repair/verify). I rebooted with the MacBook startup drive and still, no HD. And NOW I can't see the bootable partition I made on the WD external. What?
I feel like the opposite of a nerd, cuz I'm just scratching my head at this point. Oh yeah, and running 10.4.11...

Similar Messages

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print.   This problem started February 15, 2015.
My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
This question was solved.
View Solution.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My shuffle will NOT play protected AAC files but will play ripped AAC files

When I download a playlist to my Ipod Shuffle all files appear to transfer OK, but only the regular AAC files (the ones from my CD's) will play (i.e. the protectet AAC files will NOT play). If I create a playlist with only protected AAC files purchased from Itunes, NOTHING will play.
Yes, I've run updater (latest version).
Yes, I've reset to factory defaults.
Yes, I'm using the latest version of Itunes
Yes, These songs play fine on my Windows XP PC.
Yes, I've "deauthorized" and "re-authorized"
Yes, I've deleted all my music files and restored them.
Basically, I've got a MP3 player (Yes, I know I'm actually playing AAC files)
Any Ideas!!! Has anyone seen this before?

Hi,
Check the iPod hardware properties. Make sure that the iPod shuffle is connected to computer.
1. Right-click My Computer and click Manage.
2. Select Device manager.
3. Then select Universal Serial Bus controllers.
4. Right-click USB Mass Storage devices and click Properties.
5. Click the Details tab.
Check for the string of numbers if it is 000a.2700.FFFFFFF then send the iPod shuffle for service. http://depot.info.apple.com/ipodshuffle/
http://docs.info.apple.com/article.html?artnum=302110
or take it back to the place from were you brought and ask for a replacement.

I receive e-mails from Quilted Paradise and they have pictures on their forum. These pictures will not display in Mozilla Firefox but will display in Internet Explorer. What do I need to do. Also, a larger reading area.

I receive e-mails from Quilted Paradise. People post pictures on this site, but, they will not display. Internet Explorer, they will display. Also, the reading area is way too small.

If I save the page as a web archive and then open it MS Word - I see the following text at the bottom:
<div class="noscript"> To use wikis, enable JavaScript.</div>
JavaScript is enabled - via Tools / Internet Options / Security - the checkbox for Active Scripts is set to enabled.

How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
But it doesn't show in the Finder or the desktop for that matter.
And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
But... after that, it open a Finder window showing all my internal and external drives, but that drive's
name is in washed grey, like if it was unmounted (see picture 2).
When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
BUT IT DOES NOT SHOW IN THE DESKTOP...
that's my problem...
I even did a Command+i for Info on the hard drive. (see picture 4)
Can anyone shed some light on this issue?
I would be eternally grateful!
Thanks in advance!!!
Cheers!

Win8.1 hard drive will not load in one computer but will in another

I have a HP s3707c (product FQ578AA-ABA, Software build 91NAv6PrA1). Win8.1. This computer got stuck in the "preparing automatic repair" loop and will not start windows. It freezes with the windows icon showing and no spinning circle of dots appear. I made a recovery USB and it will not start from it either. I thought that it might be a hard drive problem (or software), but the HP diagnostic test from hitting F9 on start up indicate that everything passes. I have a second computer that is the same type, so I took the hard drive out of the computer having problems and put it in the one that is not having problems. It started up just fine. I put the hard drive from the good computer into the one having problems and it still would not start up windows from the drve or from the recovery disk. Any suggestion on how I should proceed diagnosing the problem on this machine not starting up windows?

Hello D1P. I understand that the hard drive will work on one computer, but not another one. I do have to point out that the computer you pointed out (FQ578AA), does not have Windows 8.1 drivers, as indicated here. You should reference this document for more information: What if I don't see my operating system.
If you are interested in troubleshooting the issue under this environment, you can test the computer for hardware failures. If there is an error, this indicates that the computer could have a hardware failure. Otherwise, you are likely facing a compatibility issue.
Please let me know the results of you troubleshooting. Thanks for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

My MacBook Pro will connect to WiFi but will not work in one location but will at others. I have the same issue with my IPhone 4S at the same location.

My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet. I will put in the password but will not display page. Other wifi capable devises do not have this issue but my Mac and my Iphone 4S will not work. I have tried restarting the router. All other wifi locations I have been to have not had this issue. Any suggestions? I am realtively new to Apple products (less than a year) so any advise is greatly appreciated.

The other devices that are working got on with the same password. It says it is connected. Just nothing works on the internet.

Mac Pro will not boot on mac os but will in vista

Hi I have an early macpro that recently will not boot mac os after I have selected the relevant hard drive. I get a grey screen saying reboot every time i cannot start from the CD also BUT I can start using Windows. I have removed the hard disc taken it to work and put it in another mac pro and it worked fine
Please help anyone
cheers
b3rn

Windows won't give a kernal panic or BSOD because it is a Mac related hardware issue.
If you can't boot from CD/DVD:
http://www.macfixit.com/article.php?story=20050311073316780
What resetting NVRAM does:
http://devworld.apple.com/qa/qa2001/qa1103.html
Your asking about a Mac Pro, but those are not "G5" and the OS can't be transferred between PowerMacs and Mac Pro.... are you sure we are talking about only Mac Pros?
Putting XP and Mac OS on the same drive, that doesn't strike me as what one would do; keep them on different drives.
And, if they are on the same drive, then you really haven't reformatted the drive, which would involve wiping any and all partitions, and then creating your Mac Standard (HFS+ Journaling) and backup XP with WinClone or install it to another drive.
I don't have trouble with Windows, but I do with the Boot Camp Assistant and drivers.

My iMac will not boot through Snow Leopard but will boot through Windows OS

My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
Brian

Possible scenarios:
1: The 10.6.3 SL retail disk is bad, it happens.
2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
3: Your optical drive is funky or some other hardware issues.
4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
Possible solutions.
1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
2: Make a SL bootable USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

HP C4795 printer will not print in firefox browser but will in IE

I have an HP C4795 printer and HP windows 7 and the printer will not work using firefox. it works fine in IE. I had trouble with firefox crashing yesterday so i uninstalled and reinstalled and printer won't work. worked fine in firefox before my ordeal yesterday.

I see you started another question thread - https://support.mozilla.com/en-US/questions/888892 - so I guess your problem isn't resolved.
If it is trying to print to an XPS file, your printer isn't selected as the destination for print. You need to select you printer in the Printer - Name box. See the screenshot.

HT4528 Iphone will not send new calendar data but will receive it from PC and ipad.

I just set up a calendar on iphone, ipad and PC. Iphone will not send new events but will receive from both PC and ipad. I just updated to iOS 6 and am reading others have similar problems. Any help would be appreciated. Thank you.

Are the other phones that can't receive messages iPhones? If not, that could be the problem.
See this Apple doc -> iOS: Using Messages
You can send and receive text messages using the Messages app included with iOS. Messages supports SMS and MMS on iPhone, and iMessage on iPhone, iPad, and iPod touch. You can also send iMessages using Messages in OS X Mountain Lion.

TS2755 Iphone 4s on iso7 will not send text msg overseas but will recieve

Iphone 4s will not text overseas mobile but will receive from same contact.

So I should update this. The phone actually loses service, I have reset the network connection as well as I have updated the carrier settings and the phone is still losing service randomly. I called the carrier and they told me there is nothhing they can do unless we bring the phone in, they believe it could be the sim card because everything on their end looks to be fine. So I'll be going to the carrier store this evening to see if they can fix the problem if not then I will be going to the apple store. Do hope this problem gets fixed soon.

ITunes will not play movie on PC but will on AirPlay

Since upddating to the new iTunes software (10.0.1.2) I haven't been able to play back any movies that I have purchased on iTunes on my Windows 7 Pro computer.
I thought that maybe my database was currupt so I created a new libary on the computer and started fresh and downloading my music and my movies that I have previously purchased.
I still cannot play a movie on my Windows 7 Pro PC.
When I click on a movie, it looks like it opens the movie on the screen, the playback controls appear and you can move the timeline and see / move the different chapter names on where the movies is at.
The screen remains black and you do not see the sound.
I tried turning on Airplay and that worked playing the movies from my PC to my Apple TV so that confirms the movie file is okay.
I have tried turning off in QuickTime the Direct3D Accelleration and alos putting Quicktime in Safe Mode(GDI Only) but it still will not play.
Any help would be appreciated. Thank you in advance.

I just tried downloading a previously purchased TV show and it works so maybe its just movies.

After the update my earbuds will not work for my music BUT will work fine for phone conversations

After the update my earbud will not work for music BUT will work for phone conversations

this might sound dumb but how do i do that because that is probably the problem

Why my brand new iphone 4 will not ring on a call but will play any other sounds?

When I play music, movies or ckeck the ringtones an other alerts, it sounds. But it will not sound when receiving calls. Please, help

Check the switch above the volume buttons, red is silent mode, if it isn't red you should hear it ring.

Hard drive will not mount with 10.4 but will mount with 10.3

Similar Messages

Maybe you are looking for