Health Kit problems

When I open Health Kit, it takes very long for the data to load and the graphs to show. Within the separate orange, yellow and blue graph items it tells me, there is "no data". After Minutes, the graphs show up. But very often, the data is not up to date and the graph ends 2-3 days ago. Apparently, it takes very long to sync the data and render it as a graph. Furthermore, the amount of steps I see in the apps that record my steps and Health Kit is usually a few thousand steps off.
Sometimes, Health Kit even tells me that I haven't chosen any data sources at all and the overview is completely empty. So I need to switch to "data sources" and choose the items I would like to view in the overview again from scratch.
I'm using Health Kit on an iPhone 5s with iOS 8.1.1 and I've had those problems since 8.0.
Health Kit data is synced from the Withings and Polar Flow Apps and I've set those data sources as the highest in priority for counting steps.
It's hard to tell whether it's these apps not saving data to Health Kit appropriately or the Health Kit app not using it correctly. But since Health Kit seems to be slow and buggy in rendering and displaying that data and sometimes does not display data at all, I tend to think that Health Kit is the problem.
Has anyone else experienced these problems? Any solutions for this?

I don't know about rgrgeo but I am experiencing a similar problem. I found rebooting the iPhone usually fixes it for a period of time. Sometimes it requires multiple reboots before the data reappears. But so far all of the data eventually comes back and none has been lost. I have been generally impressed with Apple to date but this is really a poor job. How could something so obviously buggy be released?

Similar Messages

Health kit app dead, data wiped, repeated crashing

My Health Kit app was working fine as of a few hours ago. Just recently though, I opened it to find and empty dash board with all my data wiped out. The sources, MFP, Instant Heart Rate, WiThings, all show they are connected, but no data is showing from any of them. When I tap Create Medical ID, the app freezes or crashes. When I try and add to the Dashboard nothing happens. Anyone else having this issue?
iPhone 6
IOS 8.02

I don't know about rgrgeo but I am experiencing a similar problem. I found rebooting the iPhone usually fixes it for a period of time. Sometimes it requires multiple reboots before the data reappears. But so far all of the data eventually comes back and none has been lost. I have been generally impressed with Apple to date but this is really a poor job. How could something so obviously buggy be released?

My Health Kit Is Not Working With Iphone 5.

My Health Kit Is Not Working With Iphone 5.

Iphone 5 Is Not Supported With Helath Kit That Mean Steps Walking Distance Will Not Work

Apple Watch / Health Kit - Average Heart Rate?

Hello,
I want to verify if (or how) to determine what my average heart rate is using the Apple Watch plus Health Kit. The chart in health kit seems to be showing a high and a low for a time period (day/week/month), and there seems to be line within the graph which could be an average, but there is no numerical value associated with it (and it doesn't look I can monitor average heart rate over time)?
Just wanting to see if I might be missing something?
Thanks!

No you don't have too - The watch has an inbuilt heart rate monitor however if you want to use it with a tracker app etc you will need to have your iPhone with you.

How to set up health kit on iphone6

Please direct me to place to learn ow to use the health kit on new iPhone 6

https://www.apple.com/ios/whats-new/health/

6230i CAR KIT PROBLEM

Hi All,
I have recently bought a car with a Nokia cak kit.
Part nos;
HFU-4
AX-15S
MBC-15S
Which, from my limited internet ability, understand amounts to a CARK-126 kit.
I purchased a Nokia 6230i,which I understand works with this kit, but when I connect the phone I get the message 'Enhancement not supported'.
I have cleaned the connectors with an eraser, but to no avail.
Please can anyone shed some light on the matter.
Many thanks

The message "Enhancement not supported" suggests a compatibility problem, and from the Nokia website I could not fnd CARK-126. Where did you find out that this car kit works with the Nokia 6230i? Was the source reliable?
If it turns out that this car kit is not compatible and you do want to intall one into your car, use the Nokia website to find a suitable replacement for the CARK-126

Car Kit problem with 6680

Can anybody please assist me!
I have a CK-7W car kit which I have been successfully using until recently with a 6230i. Last week my phone was upgraded to a 6680 and was supplied through work with the CR-27 cradle. However, when this is connected to the existing cradle connector, I get the message 'enhancement not supported' on the phone.
Any suggestions?Message Edited by phill_a on 15-Jan-2006
09:48 AM

Ok.
I have now tried the CK-7W with my wife's Nokia 6100, just using the pop-port cable and it has similar problems;
1. It thinks it is connected to a headset, not a car kit.
2. The radio stays on "phone" mode.
I didn't actually try making a call on it, but it seems odd that the problems are similar with another phone.
With my 6680 and the CK-7W, the phone works fine via bluetooth, but again, thinks it is connected to a headset, not a car kit.
When I connect through the pop-port cradle (CR-27) the radio stays on "phone" mode and the phone thinks it is connected to a headset. If I try to make a call, the sound is terrible, with loads of echo and feedback.
Also, while I can "see" my HDW-2, I am unable to actually pair with it.
What do I do?
I have bought the genuine Nokia accessories, and this phone seems unable to work with them. Plus the CK-7W seem unable to connect to either my 6680 or 6100 via pop-port.
What can be the problem?
I am really annoyed with what is supposed to be a high quality product.
Perhaps someone will respond?
6300 - E65 - CK-7W - CK-15W - LD-3W - BH-200 - TT6

Car kit problem HFU-5 control box

I recently installed my car kit for my nokia 6230i and it worked great no problems.... now my radio is on constant mute and the phone is not connecting up when I put it on the cradle.........any suggestions

The car kit may be frozen. Try disconnecting the power to it for a short time to reset it. That may work. If it is too difficult to disconnect the power, disconnect the car battery instead.

DFSR Health Report Problem - 3 methods of generating reports give 3 different outputs

Hello,
I am trying to implement a monitoring solution for DFSR by having a script generate a health report and send it to me. I have one replication group with 2 members and 2 replicated folders.
The script looks like this:
# Write DFS Health Report
Write-DfsrHealthReport -GroupName "RG1" -ReferenceComputerName "SRV1" -MemberComputerName "SRV1", "SRV2" -Path "D:\Logs" -CountFiles
# Get the 2 newest files -- these were just generated by Write-DFSRHealthReport
$new_report = Get-ChildItem "D:\Logs |
Sort-Object -Property LastWriteTime -Descending |
foreach {$_.fullname} |
Select-Object -First 2
# Send email with attachments
$mail_parms = @{'To' = "me";
'SmtpServer' = "";
'Subject' = "DFSR Health Report for $(Get-Date)";
'From' = "SRV1";
'Attachments' = $new_report
Send-MailMessage @mail_parms
Now here's the fun part:
1) When I run a health report using the GUI, I get a nice, clean report with no errors.
2) When I run my script from a non-elevated ISE, I get the following errors:
- Server 1 shows DFS Replication problems due to temporary attributes
- Server 2 shows as unavailable for reporting because, according to that, I am not an administrator
3) When I run the script form an elevated ISE, both servers show errors about replication problems related to temporary attributes.
I can tell you that:
- The account I am using has administrator rights on both servers
- I have checked that the account has proper permissions in WMI
- When I check for the temporary attribute using Get-Childitem cmdlet (from an elevated PS) nothing shows up.
- I have restarted dfsr service on both servers, no change
So my questions:
1) Why am I getting the WMI error of not being an administrator when I AM an administrator? And why am I getting them only when generating a report using the script and not when I am generating it using the GUI?
2) Why am I getting errors about temporary attributes when I have removed them?
Kind regards,
Wojciech

Hello,
A small update on this. I figured out that I can also generate an health report containing errors regarding temporary attributes using the GUI. Those errors appear when I choose the option to count the files in the replicated folder. If I leave the option
unchecked, the report comes back clean.
So one problems is pretty much solved. The question is why do I get those errors?
This is exactly what's shown:
========
One or more replicated folders have content skipped by DFS
Replication.
Affected replicated folders:
Homedir
Description:
DFS Replication does not replicate certain files in the replicated folders
listed above because they have temporary attribute set, or they are symbolic
links . This problem is affecting at least 100 files in 1 replicated folders (up
to 100 occurences per replicated folder are reported). Event ID: 11004
Last occurred:
9 marca 2015 at 12:32:14 (GMT1:00)
Suggested action:
Verify that the files you want to replicate are not temporary and not
symbolic links.
<v:vmlframe class="pm1" src="#Minus"></v:vmlframe>Homedir Replicated folder
File path:
D:\Homedir
Files that cannot be
replicated under the replicated folder (100):
Relative path and
file name
\4B66DB44.wmf
\4AA5E9D0.wmf
\49499C1F.wmf
=======
The list contains 100 files, with about 90% of .wmf files, some .emf files and I think one .dat file. What is quite irritating, is that I cannot find any of the files listed in the replicated folder. Let's try to find any .emf files:
PS C:\Windows\system32> Get-ChildItem -Recurse -path d:\homedir | Where-Object {$_.Extension -eq ".emf"}
PS C:\Windows\system32>
Nothing...
I have tried 2 methods of checking for temporary attributes, none of them produced any results:
PS C:\Windows\system32> Get-childitem D:\Homedir -recurse | ForEach-Object -process {if(($_.attributes -band 0x100) -eq
0x100) {write-output $_}}
PS C:\Windows\system32>PS C:\Windows\system32> Get-ChildItem -Recurse -File -Attributes Temporary -path D:\Homedir
PS C:\Windows\system32>
I'm quite puzzled here, I don't know what else I can try.
Any help would be greatly appreciated.
Kind regards,
Wojciech

IPhone G3 S with built in BlueTooth car Kit problem

I have an iPhone 3Gs.
When I connect to my car kit (Motorola T605) the kit always falls back into music mode.Tthe phone works in this mode but when I use either the iPod feature or a GPS navigation app I get no sound through the car.
It worked perfectly with my older iPhone with 2.2.1.
Any ideas as to what is wrong or what I can do to rectify the problem ?
Do any of you have car kits that work fully with the iPhone 3G s that you can recommend .. It looks like I might have to change my car kit.
I have updated my 2.2.1 3G phone .... The same problems exist. It seems to be a version 3.0 software issue to me.

Hi Tim,
I have just spent 2 hours on the phone with Motorola's tech support (They were useless at best !!!). I got nowhere at all. They blame all the problems all on Apple and say their kit is NOT guaranteed to work with all phones with A2DP. I wish they said that in their sales literature and i told them that .. they seemed to be unable to accept the idea that their saying it works in writing is somewhat misleading (Wrong in this case) and perhaps even a breach of sales law.
I then spent over an hour at my local (and very experienced) car audio store. they were more than helpful but they also could not get things working correctly.
I do have a Sony car stereo system and this has a lead for an iPod to play through the stereo system.
I connected my iPhone to this ... it worked .. sort of ! .. I had to play around a bit .. I managed to get Audio to work and my navigation App (Navigon Europe) worked this way also.
The store then played around with a Parrot MKi9100 car kit that they had on a demonstration stand.. This was significantly better and I am having my motorola T605 removed and disposed of in disgust tomorrow and the Parrot installed.
The Parrot will also charge the iPhone via it's cable unlike the Motorola and Sony setup.
I did speak to Parrot themselves and they have said to me that any of their models in the MKi range will be fine with the iPhone with version 3.0 software as they have done software updates .. The updates can be applied by the owners simply and quickly.
Just for information for you and others with similar problems ... We also tried several car stereo systems that say they have bluetooth and iPhone compatibility built in to them .. Alpine in particular ... Not one worked !!!
The Parrot is being fitted as I said earlier tomorrow ... I will make a further report when it's all done to let you know just how good it is and how everything works.
I hope this helps.

N8 Bluetooth car kit problem

After some tests and research, it seems that:
- N8 don't sync phonebook with the most recent Audi and BMW built-in Bluetooth car kits (but seems to work with some Mercedes models).
- The antenna signal communication doesn't work either.
- Some times (about 1 out of 3) the answer of an incoming call is not handled correctly by the BT car kit.
- Just phone pairing and basic call handling is working.
The same Audi and BMW Bluetooth car kits are working fine with the N97 (including phonebook synchronizing, recent call handling and antenna signal).
In this situation the N8 is almost unusable safely by car!
Does anyone have some advice?
Is this a known problem from Nokia? Is it planed of being solved in a next firmware?

There also Problems with Parrot MKI9200.
After ending the conversation with incoming calls and pressing red button the N8 starts streaming music buy it self thru the Parrot. If you call out this never happens.
And there is problem handling music streaming playback with the Parrot + N8.
Speak and contacts works like it should.
Toyota RAV 2010 BT HF you can pair it but you can't talk thru it.
Older BT headset does the same you pair it but no sound.
So I think N8 has problems with older Bluetooth devices.
All Car brand has problems with many phones so it´s no 100% solution.
Better to go the old way = Buy the BT car solution from the same brand as the phone
and you get a solution from the same decade.
And skip the old **bleep** the carbuilders is building in the most cars that has a development
time for about 5-8years that worked good with the Nokia 6233.....
Use the Nokia CK-200 work like a glove!
But buy the extra external mic the build in is just built in...
Kads

Hands Free Car Kit Problem

I Have A Parrott Hands Free Car Kit - Paired To My Iphone Version 3.01 14.6 gb
The Problem is I Cannot Answer Hands Free I Have To Slide To Answer
No Problem Dialing As The Settings Are Basic I Cant Find The Solution
Any Ideas Pls
Tks

In November I replaced my vehicle with one which has integrated bluetooth phone within the stereo system (2010 model Landrover). My previous Nokia N95 work perfectly with it and was so much clearer than the previous car kit.
However, since upgrading? to the iphone on Orange (late November) when in the vehicle the connection between phone and car kit is lost way too often and the radio screen says "no network".
I spoke to Landrover who say it's not their problem (probably right as the N95 worked fine).
Any ideas would be welcome

Health kit: Remove phone as datasource for steps

I've got a 6 plus and have just got jawbones UP update to allow healthkit integration. I've set it up as a datasource for steps.
Problem is when the data from UP is not available, ie i've quit the UP app or whatever, the phone's motion processor starts logging steps. Next time I sync my UP band, those steps come across too and I get a double count.
I'd like to be able to turn off the iphone as a source for the steps data completely but can't see where to do this.
Anyone else have any luck doing it?
Cheers

Preventing data from being duplicated in the UP app
First in the health app select sources, then UP from the list. Turn off the "Allow Up to read data" for sleep analysis and steps.
This will prevent the data from being duplicated in the UP app.
Preventing data from being duplicated in the Health app
Next go back to the dashboard and tap on the "Steps" pane. Tap "Share Data" then the edit button on the top right.
Drag the Up row so that it is the first in the list under "Data Sources." This will prioritize the data from the UP band as opposed to aggregating the data from the UP band as well as the iphone's step tracker.
Hope this helps.

Pll lockin starter kit problem

Hello,
Sorry my english isn't good because i'm french
I use a PLL starter kit to recup a signal composed by a signal at the frequency f and an other signal at the frequency 3f. I want to recup the amplitude 3f signal in phase and with phase of 90°.
To do this, i recup the imaginary part and the reel part of my signal because my imaginary part of the signal have a phase of 90° and the reel part is in phase.
I use an analyseur harmonics to check my results and i have the same value but my reel and imaginary part is not good because the value of the reel and imaginary part always change when i test my VI
I think there are a problem with my sampling frequency or my number of sample but i don't have find my problem.
This is my 2 VI :
Attachments:
Vi mesure amplitude v3.vi ‏24 KB
test vrai valeur.vi ‏50 KB

Hello clemMP,
I didn't really understand what you want to do but I think you should start from scratch with a continuous acquisition. Look at the attached picture in order to see how continuous acquisition works. Once you understood the functionnality, add your functions step by step and test your VI every time you add something.
Best regards
Jean-Luc D. NI France
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Journées techniques : du contrôle d'instruments aux bancs de test
Du 4 au 13 juin : Grenoble - Pari...
Attachments:
acquisition_continue.png ‏60 KB

LDF Starter Kit problem

Hi All,
I am using the LDF starter kit to parse an LDF file using LV 7.1
I have encountered a problem with the vi "LDF Check Number.vi" as attached.
Why does the 9th value cause the Case statement to return the default value even though the statement should accept 0-9 ?
This causes a problem for the 9th value for a signal in an LDF file as it uses the default instead of the value put in.
Attachments:
LDF Check Number.vi ‏12 KB

Hi Mike, I have had a look at your code and it does behave quite strangely. This appears to be a problem caused when using both a string as an input to the selector of your case structure, and using a “within range” case. One potential solution to the problem is if you create seperate case statments for each of the values (0-9) instead of using a single statment then the VI functions as expected. Alternatively if the input to the case selector was numeric the case would function as expected. Additional code would be required to check if the string was a number, and then convert the string to a numeric.Hope this helps,John PorterAE
NI
John.P | Certified LabVIEW Architect | NI Alliance Member

Health Kit problems

Similar Messages

Maybe you are looking for