Help: Camera No Longer Works Properly after Software Update

I can no longer use my blackberry camera outdoors. Even if I set the white balance to outdoors, the entire image is white. I used to be able to take brilliant, clear pictures outdoors in direct sunlight. I even used to be able to take pictures of the sky. Now, even on overcast days, all I get is a white mass of nothing.
I'm really upset because I used to use the camera a lot.
It's also really slow in moving from the camera app back to the main screen.
Is there a way to uninstall the software updates or restore the phone to factory (pre update) settings?

Yes, you can install your older OS (check your carrier website for the download) to your PC.
Then you can downgrade to the old OS.
See more here:
http://www.blackberryfaq.com/index.php/How_do_I_downgrade_the_OS_on_my_BlackBerry%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Smart Actions not working properly after software update

My Razr updated 2 days ago and since then my Smart Actions are not working properly.
I have my Work action set to turn the volume down when I'm at a certain GPS. It shows that "Work" is active, but doesn't turn the volume down.
Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone. I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again.
Any help appreciated.

Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again? Are your other GPS services working as normal? After the hard reset performed in the store did you install all of the same application that you had before?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

SAFARI NOT WORKING PROPERLY AFTER SOFTWARE UPDATE

WHEN I GO TO A PAGE IN SAFARI, I HOLDS TRYING TO FIND THE PAGE. A FEW MOMENTS LATER IT STATES THAT I'M NOT CONNECTED TO THE INTERNET (which I am). WHEN I REFRESH THE PAGE, IT IMMEDIATELY OPENS UP. THIS STARTED TWO DAYS AGO RIGHT AFTER THE SOFTWARE UPDATE FOR SAFARI. SOMETHING VERY BUGGY HERE. HELP

User "Bee" gave this solution. I tried it and worked for me, although Safari is loading very slowly.
Good luck!
See if you have any of the following files. Just follow the path.
HD/Library/Application Support/Conduit
HD/Library/InputManagers/CTLoader
HD/Library/Receipts/ctloader.pkg
HD/Library/Receipts/<Toolbar name>.pkg
HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
HD/Users/<User name>/Library/Application Support/Conduit
If you do, trash them and restart Safari.

Safari doesn't work properly after software update

After I've updated my MacBook Pro with the latest software I can't go to most of the websites, I want to visit. It just doesn't load 100%, sometimes I can't see anything but a white page, and sometimes I'm only allowed to see 50% of the page. Why is that? It seriously kills me! Please help. xx

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Car Stereo adapter no longer works properly after 3.1.3

I just upgraded my 3G to 3.1.3 today and now it no longer works as it did with all previous software revs with the USA Spec adapter for my factory Toyota in-dash.
Searching turned up nothing. Has anyone else had compatibility problems after upgrading to 3.1.3? I hate to go the downgrade route, but taking the chance on having to replace my mobile phone is preferable to replacing my in-dash with some neon-glowy aftermarket POS.

I have the USA Spec PA15-TOY in my 2001 Tacoma. The 3.1.3 update hasn't posed any issues for me and I use it every day.
You may want to check with USA Spec to see if there is a software update on it. When I bought my iphone, I found it didn't charge my iphone or work correctly as it had with my previous ipods. I sent it to them and they updated the software and I had to buy a new cable to accommodate charging. Total with the cable, it cost me $50, but it was money well spent. Maybe you just need a software update?
The folks at USA Spec were great to deal with and from the time I sent it out to the time I got it back was about 5 days.

Profile Manager no longer works properly after update to FF 29.

I am a developer and I previously used the profile manager to manage 3 instances of Firefox. I had one open for Development, 1 for testing and 1 for production. Each was color coded by a theme for easy discernment of which instance I was in.
After the update to 29, the profile manager no longer seems to work properly. The theme from one profile proliferates to all the profiles and it is now very difficult to tell what instance I am in.

I found that after Firefox v29, a LOT of my settings and 
add-ons were changed / reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Then check ALL of your settings. Browser and add-ons. Then restart.

Calendar not working properly after software upgrade

Today I upgraded my touch software to version 4.1 (8B117). Since this upgrade, the calendar doesn't work properly. Before the upgrade this is the scenario: I would go into my Calendar (synced with my gmail calendar) in "List" view. There was always a brief pause where the calendar would refresh. The screen would go white for a second and the "List" view would reappear. After the upgrade, I see the same refresh but the screen stays white. It won't display my calendar in "List" view anymore... unless I click on either "Day" or "Month" view and then back to "List". Anyone else experiencing this? I don't know if the upgrade is the reason but that's the only thing that changed today so I'm very suspicious.

Not sorted on mine,
Dates are added at random, so are times, i.e. a item in outlook 2010 is set for 09.00am on the 16 dec 2010.
the date will come up as 14.35pm 20 dec 2010 on the ipod. This also occurs with repeated items, weekly, monthly and annual. as a % its about 5/15% of all appointments but they are the ones that matter most.
Things I have tried to resolve this include the following,
I have reset the ipod with factory settings, I have deleted All dates in outlook then synced to ensure all dates have been deleted, I have also tried the above and then reflashed the update before re syncing them.,
Selected replace items on next sync button in itunes 10.1.0.54
put repeating dates in and they have All been date changed and hours changed at random. BUT not changed in outlook on re-syncing. I know that the database is fine as I have also synced with an Android phone and a Win Mobile 6.5 phone and the dates Have correctly entered in both devices.
Some of the dates have changed by as much as 9 days, the hours by minutes up to 16/17 hours.
Ipod details, 32Gb at present 24Gb free so not a space issue...
The ipod touch has been updated with 4.2.1 (8C148) Running itunes 10.1.0.54
settings in ipod are for location london, in general and also im mail.
(factory reset not upgraded and also tried on 2 computers running win7 pro 1 x32bit 1x64bit)

Mac not working right after software update. Please Help...

I turned on my computer today and first thing I was asked when I logged in was if I wanted to update my software because there is new updates available. So I click on update so my computer will stay up to date......Well big mistake Now I cant open my itunes, my safari, my quicktime player, or even my Microsoft word, everything is messed up I keep getting "program quit unexpectedly" from everything. I have been trying everything today to get my computer back to normal, but no luck. I have read something about "permissions not being compatible". I have no idea Im clueless I know nothing about computers. Please Help! I made a big OOOOOOps

It finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help

Mail no longer working properly after update

Since the recent mail update, my work email (which is run by google) has been a disaster (believe me, that's not hyperbole). Deleted emails, emails with a different person indicated in the inbox but when you open it it's a completely different email chain. I didn't have any of the problems with my gmail or my work account before. Anyone else experiencing problems after the update?
I don't have the problem on my phone or iPad.
Thanks.
Craig

What does this mean? You can't open them? What happens? Have you rebooted your phone?

IPhone no longer working properly after update...

Ok... i cannot use the phone "as a phone" unless i use speaker mode or a headset?!?!
i have verified the mic is actually working by recording a voice message... it played back fine; however, the meter never registered my voice?!?! any ideas??? i do not believe it is stuck in headphone mode because i have adjusted the volume with and without headphones plugged in, it does change to say "headphones".
although... i do not remember seeing "RINGER" when i adjusted the volume before??? what does this mean? any ideas on what the problem could be?? and no, the phone was not dropped right before or after the update... it worked prior to updating just fine... now it doesn't?!?!

I had the same issues. You need to do a total restore of your phone. Connect to iTunes and then do a restore as a new phone. This will wipe out all of your settings, playlists, contacts, photos, etc. And you'll have to reselect all of the aps you want loaded from your iTunes back up but it immediately solve all of my problems.

Printer is not working properly after I updated OS

My printer is not working after I updated my OS software. It will only print out pages as a mirror image. All the programs are not printing properly. Could really use some help fixing this issue.

What software did you update?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Have you contacted the printer manufacturer tech support? Read the printer's user manual? Your printer drivers updated to match your updated software?

Walkman app search not working properly after lollipop update?

Does anyone else have problems with the walkman app search function? Just yesterday it worked fine before I updated to lollipop, when I searched for a song it actually found it. Now it's all broken and can usually find results only when I type in two or three letters. If I type less or more it finds nothing at all even though I know I have those songs on my SD card.
I can find the songs just fine if I scroll through all the albums manually, but that's slow and pain to do...
I updated the walkman app too after I noticed this problem but nothing changed. I also tried cleaning app data/cache but it doesn't help at all.
Solved!
Go to Solution.

Sony really needed to test Lollipop better. On my Xperia Z3 Compact, after Lollipop installed, Walkman app could no longer find any of my SD Card music using the Search function. It could however still play the SD Card music via the playlist. My best guess is that the index was corrupted during the upgrade, or Lollipop indexes SD Cards differently.
The solution to move SD Card music to Internal storage was a non-starter for me, as the Internal storage is 16GB and I have over 32GB of music on my SD Card.
However, I can report that I solved the problem by:
Connecting my phone to my PC by USB.
Moving all the music off the SD Card and onto my PC.
Moving it all back onto the SD Card.
Time taken : over 2 hours! Thanks a bunch Sony. Lollipop looks nicer than KitKat but wasted my time, apart from seeming to make apps slower and eat battery faster My advice to people thinking of switching from KitKat - don't bother!

Ipad2, safari does not work properly after ios6 update. How do I fix it?

I need help in fixing safari problems after ios6

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Help: Camera No Longer Works Properly after Software Update

Similar Messages

Maybe you are looking for