HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Similar Messages

Audio chat works on one machine, but not on the other!

First up, my setup:
Comcast Cable Modem -> Linksys Router -> iMac (Core2Duo), PowerBook (G4), Vonage
Both systems running OS X 10.4.10. Both systems are connected through their Airport cards (ethernet cables are pulled) to the router.
To better debug the problem I turned the Firewall and LittleSnitch off on both systems.
The router's firewall is turned off as well.
Port forwarding is also checked, and the PowerBook is not even listed having any ports forwarded at all (that's the one iChat audio chat works).
There must be something blocking the iMac... but I can't seem to figure it out. Any help greatly appreciated!
Here the error message when trying to start a audio chat on the iMac:
Date/Time: 2007-10-03 21:53:13.057 -0700
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
iChat Connection Log:
AVChat started with ID 996873621.
blafusel13: State change from AVChatNoState to AVChatStateWaiting.
0x1763daf0: State change from AVChatNoState to AVChatStateInvited.
0x1763daf0: State change from AVChatStateInvited to AVChatStateConnecting.
blafusel13: State change from AVChatStateWaiting to AVChatStateConnecting.
0x1763daf0: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
blafusel13: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
Video Conference Error Report:
@:0 type=4 (00000000/0)
[VCBANDWIDTH_DETECTIONFAILURE]
[20]
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK21ebc40938e66ac3
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[BYE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK294ea2d35c1d2655
Max-Forwards: 70
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK6a2609544cbcf67a
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK063add5400ad6c74
Max-Forwards: 70
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 397
[v=0
o=vcauto2 0 0 IN IP4 u0en0.0
s=blafusel13
c=IN IP4 u0en0.0
b=AS:2147483647
t=0 0
a=hwi:1056:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16384 RTP/AVP 12
a=rtcp:16385
a=rtpID:-66179448
m=video 16384 RTP/AVP 126
a=rtcp:16385
a=rtpmap:126 X-H264
a=RTCP:AUDIO 16385 VIDEO 16385
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=framerate:20
a=rtpID:0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
User-Agent: Viceroy 1.2
Content-Length: 0
Video Conference Support Report:
@SIP/Transport.c:1218 type=1 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK21ebc40938e66ac3
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK294ea2d35c1d2655
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK6a2609544cbcf67a
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.2
Content-Type: application/conference-info+xml
Content-Length: 186
<c-i v="0" st="f" en="sip:[email protected]">
c<h>i</h><m t="a"/>
c<h>o</h><m t="a"/>
</c-i>
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK063add5400ad6c74
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>;isfocus
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK2f5118ef7b71533d
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 479
v=0
o=cape 0 0 IN IP4 m.6
s=blafusel13
c=IN IP4 m.6
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 0 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1244757996
m=video 0 RTP/AVP 126 34
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 0 VIDEO 0
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:-1337831700
@:0 type=2 (00000000/22)
[VCAUDIO_OUTGOINGATTEMPT]
[2]

well, i updated the router (latest firmware is from april 2006!). rebooted the modem, then the router, restarted ichat. same problem unfortunately. however i found some geeky cool-aid on macosxhints. a shell script which configures the router to enable dmz, and another one to disable dmz. with a little shell script one should be able to enable dmz, start ichat. and upon quitting ichat disable dmz. not the best solution, but this will help me out...
thanks to tony for his help! (we should send him a fruit basket or something 8)
http://www.macosxhints.com/article.php?story=20051015142349372

Risk terminator - Works in one system but not in the other

Hi
I have two SAP systems which is connected to one GRC system. Risk Terminator works well for the one system but does not work at all for the other.
I have done the necessary configuration, set-up the RFC connector, tested the connectors, tested the connections from the GRC system. All seems fine but when I create a role in PFCG risk terminator does not seem to be trigged at all in my one system.
Please advise
Regards
Mo

I would check the adapter for the other system and that the external program is maintained correctly along with all the settings in /VIRSA/ZRTCNFG

My Nano is being recognized on one computer but not on the other?

I bought a Nano last October. Connected to my HP Pavilion ze5700 laptop. Everything was working well. Some thing went wrong with the screen couple of months ago. Send the Nano back and got a new one. Loaded the latest software. Plugged the new Nano. Hear the sound of plugging (ding!), but the new Nano isn’t being recognized! Other plug-ins (e.g.: flash card digital camera, etc.) are being recognized!
For the first time, loaded the latest software on a second laptop (Toshiba Satellite). Plugged the new Nano. Everything works. The new Nano is being recognized on the second laptop.
What do you suggest!
Thank you
HP Pavilion ze5700 Windows XP

Welcome to Apple Discussions!
Does the iPod nano show up as a harddrive in "My Computer?"
Either way, see this...
Your Windows PC doesn't recognize iPod
btabz

I lost the Google main screen when I upgraded my firefox on one computer, but not on the other one. How do I make google my default desktop when opening Firefox?

Used to have Google come up as the search box and main page when opening Firefox. Now I get an error message, or sometimes I get Inbox. How do I switch back to Google?

make http:/www.google.com your home page
* How to set the home page | How to | Firefox Help<br>https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Classic - text ringtones work for one contact but not for others

Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.

Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages.

Report visible for one user but not for other user

Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
Sananda

Hi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM

Ipod works on one computer but not the other?

Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

GarageBand - Controller's Foot Pedal (in AUSampler) works for one track but not for another

I am learning how to use AUSampler in GarageBand. I am using a MIDI controller (Alesis Q88) with a foot pedal for the sustain.
The sustain works with the default sound in AUSampler (Sine 440), but not for a sound that I imported. Also, my imported sound plays longer the lower the keys played, and the higher up the keys the faster it plays. Either way, it doesn't allow sustain, but yet the default sound does.
I know where the Controller / Sustain Pedal area is within the Piano Roll but that doesn't fix my dilemma.
I presume my problem is related to the viola sound I imported (wav format), or the way I need to set something up; I hope the latter.
Any clues?
Many thanks in advance.

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

(PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) is working in one document but not in any other

Hello,
I am using (PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) to get the line breaks in a pdf document. I'm getting the correct results on the plugin_apps_developer_guide.pdf (The reference guide for plugin development to Adobe Acrobat), but not on any other pdf document. I've tried the code on both tagged and un-tagged document, but only this document is giving me the right result.
Can anyone please guide me what can be the possible reason in this and how this can be handled.
Thank You
Vaibhav

Hi Srikanth,
1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
dim objcmd as new OledbDataAdapter _
("SELECT * FROM HR.tblPeople" _
& "ORDER BY LastName, FirstName",objConn)
2. use
Dim ds As New DataSet()
Sinclair

Sign in to icloud... but it is not showing the correct email. It works on my computer but not on the phone

Its is showing the wrong email... I can sign in on my computer but not the phone

Welcome to the Apple Community.
If it isn't showing up at all, it means that Find My Phone hasn't been activated.
If it's just the location that isn't showing up, it may well mean it isn't connected to a network at this time.

MobileMe on one Mac but not on the other

I have two Macs. Both OS 10.5.4 and all updates current. On the one it shows MobileMe, on the other still shows .Mac. When I click on the .Mac I get the msg "The application System Preferences quit unexpectedly". I tried (six time and different days) using TimeMachine to Restore the OS--one time I get MobileMe but lose my iPhoto app and pics. To get iPhoto back I go back to .Mac. I don't understand why the updates worked on one machine and not the other. I can't Sync the two. Any ideas? Thanks.

Same problem, hours invested in this. Not sure Microsoft can catch up to Apple software, but Apple sure caught up to Microsoft in one, really bad, "upgrade" called MobileMe.
I have two Macs. Both OS 10.5.4 and all updates current. On the one it shows MobileMe, on the other still shows .Mac. When I click on the .Mac I get the msg "The application System Preferences quit unexpectedly". I tried (six time and different days) using TimeMachine to Restore the OS--one time I get MobileMe but lose my iPhoto app and pics. To get iPhoto back I go back to .Mac. I don't understand why the updates worked on one machine and not the other. I can't Sync the two. Any ideas? Thanks.

My home share is not working i have tried everything it works on one computer but not the other help!

I have tried uninstalling and reinstalling itunes i have tried messing with my avast and I cant get anything to work please help me! it works on another computer in the house but everytime i try to click on his library it says it loading his library and then stops and goes to my music. plz help!

When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

HELP!! WRT54G2 works for one computer, but not for the other

Similar Messages

Maybe you are looking for