Hi guys..I am new to this apple ipad apps development .I want to know how to change ipad apps to iphone apps with out changing design and code?can any one tell me?

Hi guys..I am new to this apple.I have developed ipad2 apps . I want to know how to change ipad apps to iphone apps with out changing design and code?can any one tell me?

You are in the wrong forum. This is a user forum. Try the developers forum.

Similar Messages

My iPhone 5c require I cloud ID and paswerd. Any one tell me to resolve the operation without id and paswerd or tell me how I could know about previous user

My iPhone 5c require i cloud ID and password of the first previous user. Any one tell me to resolve this problem or how know about previous id or contact number

Enter the correct Apple ID and password that was used to setup "Find My iPhone" on the device. Without those credentials the iPhone is a paperweight.

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

Can any one tell me how to break this into separate columns 05/13/2014,"46","48","37","70","74","1","2","121000000.0000"

Can any one tell me how to break this into separate columns 05/13/2014,"46","48","37","70","74","1","2","121000000.0000"

Paste your content into TextEdit. Format > Make Plain Text.
Comand-S to save.
Command-Click the filename at the top of the TextEdit window. Click on the second line, the name of the folder where you saved the document.
Select the extension of the document Name in the finder window that is being displayed and replace TXT with CSV.
Right-Click the csv file and choose Open With > Numbers.
Numbers will open with a column for each field in your data.
Jerry

TS3899 Hi my nan keeps Getting an error message of cannot get mail the connection to the server failed.... Can any one tell me what this means please

Hi my nan keeps Getting an error message of cannot get mail the connection to the server failed.... Can any one tell me what this means please

I too am getting this message. I have been using my iPad for two years with no problems but a couple of days ago I starting having this problem intermittently. I have restarted the iPad when that did not work I deleted the account and reloaded it. Nothing seems to work. I was having the same problem on my iPhone but that seems to be OK today. Any other ideas?

Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

Hi
Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

Dear Srikanth,
I am not sure, if my answer will satisfy you, but anyway I will try:
Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
Well, to solve situation you have few ways:
1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
Best Regards
Arnost

I'm having difficulty publishing via ftp to Machighway, I suspect this has to do with the fact I seperated my webpages into 3 sites in iWeb. Can any one tell me how to undo this in iWeb?

I'm having difficulty publishing via ftp to Machighway, I suspect this has to do with the fact I seperated my webpages into 3 sites in iWeb. Can any one tell me how to undo this in iWeb?

You'll have to describe in detail the workflow you're using to upload to Machighway and any messages/warnings that you get along the way. Also what version of iWeb are you using and are you publishing just one of your sites?
OT

Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media

can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

Can any one tell me how can i claim warranty of my my iphone charger online ?

Can any one tell me how can i claim warranty of my my iphone charger online ?

See the "Service -> How do I obtain service" section of this page:
http://www.apple.com/support/iphone/service/faq/
selecting your country as appropriate.
Regards.

Can any one tell me how to change or know rescue email?

Can any one tell me how to change or know rescue email?

There are instructions on this page on how to see/edit/add it :
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.

Can any one tell me how to write open hubs to application server?

Hello Everone,
I created open hubs and my requirement is to write the file to application server. So, I created logical file name and logical paths as specified in below link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
That is created 'logical file path defination' in 'FILE' transaction. Used the physical path as - 'bw/FTPOUT/BPR/GM/<FILENAME>' as given in above link..
In logical file name I used the above logical file path.
When I run the open hub, I'm getting the ABAP dump "UNCAUGHT_EXCEPTION
CX_RSB_WRITE_ERROR
12/18/2008 09:00:40"
Can any one tell me how to write open hubs to application server?

Hi David,
Goto transaction code - FILE
1) Create a Logical File Path definition, enter the technical name and description by clicking new entries and save it.(z_ftp)
2) create a Logical file name definition using cross client,
enter the logical file name = z_ftp , name = ftp , physical file = ftp_test.txt,
dataformat = ASC, Appln area = BW and Logical path = z_ftp(created from step 1).
click SAVE button.
3) Assignment of physical paths to logical paths, choose your logical path here.
enter the syntax group = UNIX
Physical path = /bwftp/....
Save it .
In the openhub,
choose definition type = file
Check the applicaion sever.
servername = dev
type of file name = Logical file
Applin server file name = z_ftp
separator = |
Hope this helps and solve your problem.
Thanks
Sat

Can any one tell me how to work with field exit????

Hi
Can any one tell me how to work with field exit I know how to create them. I want to know how it works. Actually I want to create a field exit for T-CODE MIRO. Where I want to put the value ebeln of the PO Reference tab into the Assignment of details tab and make Assignment field disable.
Thanks in advance

Hi,
Follow the Steps,
1. Go to CMOD transaction
2. From the menu "GOTO->TEXT ENHANCEMENTS->DATA ELEMENTS-   ->NEW DE CUST DOCU".
3. In the displayed box specify the data element and
   press either "CHANGE" or " Ref to screen" button
4. CHANGE button is for defining the documentation
5. "Ref. to screen" if for assigning the screen in which
   a field has the this type data element.
   Note: You should have used this data element for a
         field in that screen.
6. Now it will ask for Function Module name, specify the
   FM name and double click it. It will go to the editor.
7. Now using the Import parameters code accordingly
8. Activate and go back
9. Now "Assign the created program ( that is FM) to the
   screen by specifying the Program name and Screen
   number.
10. Now save and activate.
Note: No need to create a separate project for creating field exit through transaction CMOD.
I hope this is suffice.
Regs,
Venkat Ramanan

Can any one tell whether the concept which i understood is correct or not

hai everyone
iam studying jdbc and this is what i understood about the basic concept .can any one tell whether the concept which i understood is correct or not
whenever the statement class.forName("driver class") is executed driver class is loaded and registered with drivermanager.Internally drivr class contains a static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
whenever the statement class.forName("driver class") is executed,static bloc is executed first and driver class is registerd.
concept as i understood about DriverManager:
suppose there may be situations where an application developed in java has to deal with one or several databases and this is accomplished with one or different driver classes.so all these driver classes are to be managed and this is done by DriverManager class and in order to make the driver class itself known to the driver manager we have to register the driver classes with the help of registerDriver() method of DriverManager class because DriverManager is the class which will attempt to load the driver classes into memory..
If we look at the last statement: DriverManager is the class which will attempt to load the driver classes into memory.Here i have some doubt if DriverManager class loads the driver class after registering the driver class then what does the statement class.forName("driver class") will do which is also used to loaad the driver class.
what i understood is since the responsibility of loading the class is done by class.forName("driver class") only registering of the driver class is done as the class is alredy loaded.
help me to clear my confusion
thanks in advance

hai everyone
iam studying jdbc and this is what i understood about
the basic concept .can any one tell whether the
concept which i understood is correct or not
whenever the statement class.forName("driver class")
is executed driver class is loaded and registered
with drivermanager.Internally drivr class contains a
static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
}That's supposed to be the case, but there's no way to guarantee that every driver actually has that static init. I don't think I've ever run across one that doesn't, though, so, yes, you're basically correct.
whenever the statement class.forName("driver class")
is executed,static bloc is executed first and driver
class is registerd.When you do Class.forName(), the class is loaded and initialized. Whenever you initialize a class, its static init blocks are executed, yes.
concept as i understood about
DriverManager:
suppose there may be situations where an application
developed in java has to deal with one or several
databases and this is accomplished with one or
different driver classes.so all these driver classes
are to be managed and this is done by DriverManager
class and in order to make the driver class itself
known to the driver manager we have to register the
driver classes with the help of registerDriver()
method of DriverManager class because
DriverManager is the class which will attempt
to load the driver classes into memory..Except for that last part, yes.
DM keeps track of loaded drivers, and gives them a chance to parse the connection URL when you call getConnection. DM does NOT load the driver classes into memory, however. That's done when you call Class.forName.
what i understood is since the responsibility of
loading the class is done by class.forName("driver
class") only registering of the driver class is done
as the class is alredy loaded.Right.

Hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

http://support.apple.com/kb/TS3694#error-1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Can any one tell me difference between 2 dates in days

hi guys,
can any one tell me the difference between 2 dates in days
for eg: input 20.12.2006 and 06.11.2006 will be 34.
thanks in advance for you answers
Regards,
Anil kumar P

Hi Anil,
Check this code for u r requirement
REPORT ZDATEDIFF.
DATA: EDAYS LIKE VTBBEWE-ATAGE,
EMONTHS LIKE VTBBEWE-ATAGE,
EYEARS LIKE VTBBEWE-ATAGE.
PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
TODATE LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
exporting
i_date_from = FROMDATE
i_date_to = TODATE
I_FLG_SEPARATE = ' '
IMPORTING
E_DAYS = EDAYS
E_MONTHS = EMONTHS
E_YEARS = EYEARS.
WRITE:/ 'Difference in Days ', EDAYS.
WRITE:/ 'Difference in Months ', EMONTHS.
WRITE:/ 'Difference in Years ', EYEARS.
INITIALIZATION.
FROMDATE = SY-DATUM - 60.

Hi guys..I am new to this apple ipad apps development .I want to know how to change ipad apps to iphone apps with out changing design and code?can any one tell me?

Similar Messages

Maybe you are looking for