Hiding/Removing field in a standard Detail view Org Chart 3.0 SP2

We are trying to remove or hide a couple of fields from the details at the position level in the admin console for the Org Char application and cannot seem to find this in the Details designer. We were able to do this for the Org Modeler, but the screen in the details designer doesn't seem to have this functionality in the admin console of the Org Chart application.
Any help would be greatly appreciated.
Jacques

Hi Jacques,
There are 3 things you are trying to do here:
1. Change Location caption
2. Change Location field logic for data retrieval
3. Remove Mobile number and Fax number fields
Each of these has completely different methods and some are easier than others.
1. You need to change the caption for Location field. In the Caption Editor in the AdminConsole you need to change the caption key Field_Location.
2. I'm pretty sure this comes from a Nakisa BAPI and therefore cannot be changed. The alternative (and complex) methods are to either create a NakisaRFC function to extract this data or (for better performance) create a BAPI that extracts all data for that section of the details panel with your "new" Location field. These would be the same process if you wanted to add an entirely new field.
3. You should comment out these fields in the 75927beffed94564bef6af9d3045757e fieldset in the detail data configuration SAPPositionIncumbentsDetailsConfig_Data.xml.
Best regards,
Luke

Similar Messages

Removing Buttons in Collaboration Task Detail View

Hello All,
I have a requirement to remove the "Edit" button from the " Item Detail" view of the SAP Enterprise Portal NW04 SP14 collaboration task.
I would appreciate (and reward) very useful answers.
Thank you.
Regards,
Collins

Hi,
Activating the Minimal Grouping of Collaboration Services
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/ee2c740aed4fcfe10000000a422035/frameset.htm
Patricio.

Hiding plant field in SC item details

Hi ,
Please let me know how to hide plant field in item details of SC through SPRO (not WebDynpro ) .
Regards,
Somesh

Hi, You need to go further to the
Configure Control for Fields of Substructures
Then select
Metadata for Fields of Substructures and Table-Like Enhancements
And then create following entry.
Regards
Konstantin

Remove Field on a "Add Contact" view

Hello,
I have the following question:
- I'm in the related "Contact" of the "account" views.
When I click "Add" (not New !), I can see a view to select my contact ?
How Can I customize this view ?
Thanks for your help.

maybe you could create a custom field...
It depends on your exact needs.

Adding a Z field in Standard Database view

Hi ALL
My requirement is to add a z field in a Standard Database View .
Please advice how do i go ahead .
Urgent help will be appreciated .
Thanks
Shweta

In the View,Menubar->goto-> append view.
It will ask for the structure for append.You now have to define a name for this append view. The system proposes a list of the append views that already exist for this view. If there is no reason for not doing so, you should choose an append view from this list and then enhance it.
If the view does not yet have an append view, the system normally proposes a standard name that can be selected if there is no reason for not doing so. If no name is proposed, you must select a name in your namespace.

Additional Field in standard maintenance view

Hi Experts,
I would like to add an additional field plant in maintenance view V_TKZU3_CO (SPRO PATH: Controlling --> Product cost controlling -->Product cost planning --> Basic settings for material costing -->Overhead -->Define costing sheets ).
What I'm planning to do is to modify the standard maintenance view V_TKZU3_CO and regenerate the table maintenance generator so that the new field will be added and populate a ztable a copy of table TKZU3 + plant...
However what I'm afraid of is when I regenerated the table maintenance generator using the standard function group OCOE, it might impact some other standard object included..
Do you have any idea on how can I add the additional field without modifying the standard? Or if I will apply the standard modification I'm planning.. what are the possible impacts?
Thanks in advance!

Hi
U can create a new table view like V_TKZU3_CO, insert your new fields and create the maintenance view program for it.
Max

Deleting fields from a standard view

Hello,
I want to delete fields form standard view which are appended by me accidentally . I have written a delete statement to delete the fields from the standard view . but i got an error at declaration part . I have declared it as shown below
Tables : V_MMIM_REP_CUST
V_MMIM_REP_CUST----
> is the view name
So, guide me how to declare this view .
Regards,
mnarar.
Edited by: mnarar on Nov 30, 2011 1:12 PM

Hi,
This is just an idea to delete the records from the Table. But ideally you should not use this approach in any development.
The table for this view is MMIM_REP_CUST. You can write a Custom Report Program where you need to create a work area with the values which you would like to delete. And then write a Delete statement and delete the table entry from that work area.
I guess you are doing this in the development environment and have all the necessary authorizations. And you should not transport any report like the above to other environments. Also double check if that entry will not effect other business scenarios.
Hope this helps.
Best Regards,
Samantak.

Add hyperlink on the field txt in Search Result List to access Detail View

Hi, SDN fellows.
I have a PCUI requirement stated the following:
1) In the line item of the Search Result List (table), there is one hyperlink in field 1.
2) When click on the hyperlink, it will trigger the action to open up Detail View (Object Data Pattern 1 - ODP1) of the line item.
3) Problem: When the value of the field is null, there will be no hyperlink to open up the Detail View.
4) For work around, my requirement is to make the other fields (i.e. field 2) to have a hyperlink to trigger the action for opening the Detail View of the line item.
I am not strong in PCUI. Please advise how to do so, while I am exploring the guide in the PCUI Book.
Thanks,
Kent

Hello Kent,
check out the settings of the Field Group element where the link is already active. Copy that settings to the Field which you want to be linked too.
Regards
Gregor

Approval view for working time empty fields 'message' and 'standard time'

Hi experts,
We want to use the SAP-standard program to approve working hours in the Portal. The basic settings are all done, but we still have a problem with some fields.
When we use the SAP-standard approval view SAP_LINE (IMG --> Define approval views) and we go to the portal we see that the fields 'message' and 'standard time' are filled and the hours with a warning are red. When we create an exact copy of view SAP_LINE with the same detailscreen selections, the fields 'message' and 'standard time' are empty and the warning does not turn red.
See the print screen below for an example.
http://img641.imageshack.us/i/printscreenapproveworki.jpg/
Can someone please help me with this?
Thank you in advance.
Kind regards,
Bob

Hi,
We have found the place to change this fields.
To change this fields we had to create an enhancement implementation for BADI definition 'HRCATS_APPR_CUST'
Information for this can also be found in the IMG documentation.

Long Response fields when downloaded as a detailed view PDF of a single response are cut off

When a field in a form runs more than one line, the field is converted into a single line scrolling box when exported as a PDF for a single detailed view. It is readable by scrolling, but is cut off when printing it out, making hard copies useless.
Is their some formatting option I am missing? Can a field be expanded vertically?

Is the field a "multi-line" text field (its the second icon on the Add Item toolbar in the Design tab)?
If it is you can just make the field bigger by dragging the lower right corner.
Randy

Link to remove Product from Cart in Product list/detail views

I'm wondering if it would be possible to construct a link/button to remove a product from the cart (assuming it's in the cart) from within the product list or detail views.
Much like the 'remove' link on the shopping cart page.
Anyone done this or have any ideas as to how it might be done?

I was messing around with it and figured it out.
I changed the onclick value ...false to ...true.
Apparently this allows the href value to be used after the onclick function has run. Here's the jquery i used to make the change.
$(linkA).attr('onclick',$(linkA).attr('onclick').replace('false','true'));
I hope this helps someone else.

Work around for SVG's in detail view?

Using an SVG in a custom field within a web app. The file displays correctly in the list view, but converts to a linked .svg file in the detail view. Any ideas on how to work around this?

Thanks for your reply Liam! I am playing with Liquid and trying to build my first webapp using it. The tag name has a space in it so I am using:
{{this.["logo white"]}}/* links to an svg */
Adding "_path" right after "white", after the "]", or any of the "}" is not generating anything. I did how ever get this to work:
<pre><img src="{tag_logo white_value}" /></pre>
I would really like to learn to do it with Liquid though, is there something I am missing? Thanks for your help!
I also got this to work after removing the space from the field name:
<pre><img src="{{logo_value}}" /></pre>

Fields in iView Item Details -create mode- are disabled

Hello,
we are using SAP MDM Standard iViews (Item Details) to create new data records.
In some iViews on specific tables - I coudn't find any logic - the fields are grey and disabled instead of white and ready for data entry after pressing button "create". Does anyone has an idea for this? All parameters are set to enable=yes. The tabels are stadnard flat tables. The Roles in MDM are allowing read/write on the fields.
Thanks a lot!
Marc

Hi Volker,
I create(d) an iview of type Item Details on this table once -and it works! Then I created a similar iView and it didnt work - the fields are grey
From what i understood from your problem statement is that you are creating two item details iView refering to the same table say Products.
It means you are are trying to give provision to edit or create the same record through two separeate item detail iview.Or in other words when you select a single record from the result set iview it should display the details in both the item detail iview and also allow you to edit it.
I am not sure whether this requirement as you are using the same fields in two independent iviews and expect them to work concurrently.
I may be wrong but this could be one of the reason why when selecting the fields for modification in one item detail view it is showing greyed out in the other.
Hope It Helped,
Thanks & Regards
Simona Pinto

Remove fields from dashboard

The dashboard on the cProjects entry page (4.5.) contains about 50 different columns. Some of them are visible by default, while others can be added via ALV-personalization (link "Settings").
I have now successfully added some customer fields to the dashboard, so that I have about 60 columns.
Now, some of the default columns do not make sense at all in my company. How can I remove them from the dashboard (with removing I mean not only remove them from the default view of the table, but also from the list of possible columns under "Settings").
I can of course delete them from the structure DPR_TS_DASHBOARD_ATTR, but this would be a modification, and could lead to syntax errors or other problems after the next upgrade.
Is there an easier way?

Hi Daniel,
I don't think you can remove them, as it's a standard layout. For there are two options:
- Either you remove the them from the defailt view in the administration mode for instance. In that case, the columns remain selectable in the settings as you mentionned.
- Or you create a custom extract layout, copy from the standard one, without the non-desired fields.
Matthias

Help with detail view on photo page... no help from previous post!

I posted these questions a few days ago and although people have been looking no one has any suggestions yet...
Is my request too complicated?
Old Toad, Wyodor, Cyclosaurus... would you have any tips?
Many thanks
I am using iweb to create my site and have an album that contains photo pages. I used a web widget / HTML snippet, to jump from my album page straight to 'detail view mode' on my photo page.
I'd like to customize the look of my 'detail view' a little (I'm using the 'White' Theme).
I have removed 'subscribe' and 'download' and do not have a slide show.
How do I:
1. Remove the text 'previous', and 'next' that appear under the image leaving just the arrows?
2. Change the look of those arrows (from 'canvasarrow-right03.png' and 'canvasarrow-left03.png' to 'canvastransport-left-N03.png' and 'canvastransport-right-N03.png')?
3. Remove the arrow that is next to 'Back to album' leaving just text?
4. Change the font and colour of this text ('Back to album') to Aerial Regular 12pt caps, 65% black?
5. The thumbnails have a blue frame to indicate which image is in large view, how do I change the colour to an orange?
6. Remove the buttons in blue and grey, top centre (that change the view from thumbnails and large pic to just large pic)?

I can't change the "Sending Page" because it uses custom "Filtering & Sorting" to drill down to the addresses..
Once the User has "Checked" the records to be mapped, they click the Map button, and it takes them to this Detail page (with the ID's in the URL)
Now that you mention it, the Detail form does have all of the Form fields/wkRptID's (for each of the addresses) on the page.. but how would I iterate thru the form data of each record, and grab the wkRptID's and add them to the WHERE statement..?
Either way, once I have the Query correct, it is then fed to my Google Map to plot the addresses..

Hiding/Removing field in a standard Detail view Org Chart 3.0 SP2

Similar Messages

Maybe you are looking for