How can I get an HP Deskjet 3050 to work on a macbook air OS 10.9

How can I get an HP Deskjet 3050 to work on a macbook air OS Maverick 10.9.5?

Ok here is a good link Re: how do i setup/connect to my wireless printer I assume the printer is wirless if so this should work. First turn the printer on then go into system preferences and then printers and scanners. It should look for the printer that is on the same wifi as you and then just set it up.

Similar Messages

  • How can I get an HP Deskjet 882C to work with Snow Leopard?

    Is there a way to get our HP Deskjet 882C to work with Snow Leopard?  This printer is a workhorse, and even though it is so old, our budget and common sense say not to get rid of it.

    Install the HPIJS package. This is an open source set of drivers for older printers.  HP dropped support for a whole lot of printers when Snow Leopard was developed.  These drivers fill the gap.
    You will need to install three components - Ghostscript, Foomatic RIP and the hpijs package.  They are all on the HPIJS web page.  Once installed, restart your Mac, connect your printer.  You will probably need to go into System Preferences > Print & Fax to select the printer and set it as your default printer.  After that it works great.  And it also works on Lion. 

  • How can I get an audio-in connector to work with a MacBook Pro (Mid 2012)?

    I have a Plantronics headset with two cables: audio in and audio out (like the two connectors on the old MacBooks). It is pretty old and so I assumed it was for those. I have tried to get it to work with my mid-2012 MacBook Pro, but the microphone (audio in [yes, it does have a picture of a microphone on it]) cable isn't recognized by the Mac. It thinks it is headphones, and unsuccessfully tries to play sound through it. The other cable (audio out), however, successfully receives sound and plays it through.
    I hope that makes sense, and I would appreciate any help .

    They removed the audio input, starting from your model, you will need an USB interface, there are may, and it depends on how high of quality you need.
    This works for most applications, unless you are trying to record "music quality"
    http://www.amazon.com/s/?ie=UTF8&keywords=griffin+imic+usb+adapter&tag=googhydr- 20&index=electronics&hvadid=19014779847&hvpos=1t1&hvexid=&hvnetw=g&hvrand=777870 5971251328924&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5gt435btej_b

  • How Can I Get an 23" Cinema Display to work with a MacBook Pro 15"?

    A 23" Cinema Display (M8536) will not display with and adapter connected to a MacBook Pro 15" (mid 2010). Adapter used is Apple Mini DisplayPort to Dual-Link DVI Adapter. What's wrong?

    They removed the audio input, starting from your model, you will need an USB interface, there are may, and it depends on how high of quality you need.
    This works for most applications, unless you are trying to record "music quality"
    http://www.amazon.com/s/?ie=UTF8&keywords=griffin+imic+usb+adapter&tag=googhydr- 20&index=electronics&hvadid=19014779847&hvpos=1t1&hvexid=&hvnetw=g&hvrand=777870 5971251328924&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5gt435btej_b

  • How can I get an Iomega Zip 250 to operate on my MacBook Air?

    Running 10.7.5 on a MacBook Air and want to access data on a bunch of Zip Disks. Plugging my Iomega Zip250 into a USB port, the Mac doesn'y even recognize it. Is there any hope?

    From study of same just now, others have tried to mount Iomega Zip on LION without any luck.
    If Lion wont mount Iomega, conclusion follows for Mountain Lion
    Youll need to find some older mac or PC to run the old-tech Iomega disks. 

  • How can I get the old view of iCal back on my MacBook Pro and iPhone?

    How can I get the old view of iCal back on my MacBook Pro and iPhone?  The Mavrick version is crisp and clean but a colored dot is not the same as a highlighted word. I rely on my iCal on my MacBook Pro and iPhone 5 to help me track which of the 8 sites I visit for my job during the week - the color coding is (was key) to organizing and tracking meetings.  I hate the upgrade! 

    If purchased through the Mac App Store then it can be installed on up to five authorized CPUs. Otherwise, it's controlled by the license that came with the software.
    To install on another computer copy the downloaded installer application to the other computer.

  • How can i get a pdf from my iPhone to my new macbook? I keep trying to sync but it says it will delete all the books/pdfs on my phone. I don't have this pdf on my computer and don't want to lose it. Help please!

    How can i get a pdf from my iPhone to my new macbook? I keep trying to sync but it says it will delete all the books/pdfs on my phone. I don't have this pdf on my computer and don't want to lose it. I am using the same iTunes account. Any suggestions?

    Hello ashlyn888,
    Based on your post it sounds like you would like to sync your iBooks content with your computer. I have located an article that may help you in this situation. While you can sync this data with your computer you can also use the sharing button to send PDFs using various sources:
    iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How can I get my hp Laserjet 1012 to work with Windows 7?

    How can I get my hp Laserjet 1012 to work with Windows 7?

    Here is a list of products that are not supported in the win7 OS. This product is listed there.
    Products not supported in win7
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How can i get rid of a blue screen background on my MacBook Pro

    how can i get rid of a blue screen background on my MacBook Pro

    Hi Heidi,
    Do tou mean it only boors to a blue screnn???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • How can i get my unlocked iphone 4 to work with a new pay as u go sim card

    how can i get my unlocked iphone 4 to work with a new pay as u go sim card

    Insert the sim card and activate the iPhone.

  • How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.

    How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.

    Shairationgco wrote:
    It can't even detect my husband's iphone help!
    It's not supposed to. Why are you trying to connect your iPhone to your husband's iPhone?

  • How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

    Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

    Sean and Andy -
    I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
    So here's what does NOT work for me... 
         (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
         (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
         (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
         (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
         (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
         (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'--  routers, but does not show mine. (??!!)
         (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
         (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID! 
    So, now asking Sean and Andy (or anyone else) for further suggestions... ???  As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
    Any advice would be appreciated!  TIA.
    Ed

  • HT4061 HOW CAN I GET THE CODE TO MAKE IT WORK IN EGYPT

    HOW CAN I GET THE CODE TO MAKE IT WORK IN EGYPT
    this is my details    serial: DN*******8GH
    IMEI : ****
    MEID : ****
    MODE : MD656LL
    <Edited By Host>

    If your phone is not unlocked you need to contact the carrier it's locked to.

  • How can I get my mac email account to work?

    How can I get my mac email account to work?

    That requires you to enter the configuration correctly.  You can find out the configuration for your email from your ISPs website in most cases. Or if you're using Gmail, Yahoo, or Hotmail you need only Google something like:
    "Gmail configuration for Apple Mail"  or  "Hotmail configuration for Apple Mail" (without the quotes). 
    That should get you started..
    Jeff

  • I have taken my 750GB HD out of my 17" MacBook Pro and put it into a 2.5" USB to SATA enclosure but can't get it to open up on my new 11" MacBook Air. Any ideas please.

    I have taken my 750GB HD out of my 17" MacBook Pro and put it into a 2.5" USB to SATA enclosure but can't get it to open up on my new 11" MacBook Air. Any ideas please.

    Have you installed the recent update?
    There are some issues with Apple USB 3.0 ports and some devices.

Maybe you are looking for

  • Computer is no longer authorized for apps installed on your iPhone

    Does anyone else get a message that your computer is no longer authorized for apps installed on your iPhone?  When I click "authorize" I get a message that "This computer is already authorized".  But when I click ok, I get the first message again . .

  • How can I change the values of Withholding tax grid in MIRO trx

    Hi everyone, I am trying to change WT_WITHCD field in MIRO's Withholding tax grid by using  MRM_HEADER_CHECK. I developed the following code but the changes didn't appear in the screen:         LOOP AT i_rbkpv-h_rbws         INTO    r_h_rbws.        

  • Pro Applications Update didn't update

    I had a problem with an error message saying the "file is too new for this version of the software. I have FCP 6 (part of Final Cut Studio 2) I read here that the fix to the problem is an update which I just downloaded and installed, but my FCP 6 was

  • Problem with Camera Raw

    I am using Photoshop CS6 v 13.0.1 x64. I have been using Photoshop for years, of course various versions. All updates have been installed. My OS is Windows 7 Pro X64 with all applicable updates. I just downloaded NEF files from my D2X and was opening

  • Exchange 2007 smarthostdelivery missing

    Hi, Recently, I encountered this problem twice in a span of 3 weeks. We have configured our Exchange 2007 ( sp2 ) CAS/Hub to route outgoing mails to an antispam appliance. We have this done 5 years ago with no problem. Until recently, our users compl