How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

Similar Messages

  • How can I list all the column names of a table by programming?

    Hi,
    Now I want to write an function which has the following features:
    Firstly, The function was given a parameter as table name.
    Then, it will lists all the columns names of the table.
    e.g
    table: person
    ---firstName------lastName----+
           Michale               Jackson
    We can get the columns 'firstname' and 'lastName' by calling the function with table name 'person'.
    And I also wonder that where I can get reference book or any other materials?
    Thanks.
    Edited by: wenjing wang on Feb 15, 2008 6:42 AM
    Edited by: wenjing wang on Feb 15, 2008 6:57 AM

    hi,
    hope the below code helps u. Just take the headee which contains the field name and split it like below and compare it with the field name u want here 'last name'.
    here,
    'First name' will be in wt_filedata1 and remaining field names in wt_filedata2, so 'do' continues.
    c_tab must be the separator, either , or + or tab etc..
    CODE:
    read table person into wl_header index 1.
    do.
        split wl_header at c_tab into: wt_filedata1 wt_filedata2.
        if wt_filedata1 <> 'lastname'.
          cnt1 = cnt1 + 1.
          wl_header = wt_filedata2.
        else.
          exit.
        endif.
      enddo.
    Please reward if it is useful.
    regards,
    sri

  • How can i display all the query items to a table?

    how can i display all the query items to a table in a jsp file?
    i always have an out of memory error..

    any body??any idea?
    is it possible thru configuration or i have to write a program by the abaper??
    Biswa

  • How can I exchange all the images in a slide show with new ones

    I have 18 slide shows each is a different competition for our camera club. How can I exchange all the images from each slide show with new images as our club competitions commence? I am reluctant to just delete the slide show because I will have set it all back up. I want to leave the size shape and format of the show as is, but just exchange all of the current images with new ones. I am hoping there is a quick way to delete and replace all images for each show? Each slide show has around 40 images and I have 18 shows
    thank you for your help

    1. Activate "thumbnails" in the configuration panel
    2. Select one Thumbnail.
    3. Rightclick and choose "Select same"
    4. Press "backspace"
    5. Open the configuration panel and load the new images.

  • How can I see all the Transaction Code that the client is using?

    How can I see all the List of Transaction Code that the client is using?

    Hello Sugauli,
    Did you mean to ask
    transaction types the client is using?
    instead of
    transaction code
    If so, go to SPRO (in ERP system) and follow this path:
    Sales and Distribution -->
         Sales -->
             Sales Documents -->
                 Sales Document Header -->
                      Define Sales Document Types
    All the transaction types that are not used have an X in the column Block.
    Easwar Ram
    http://www.parxlns.com

  • How can I query all the members of a group using querbuilder?  I cannot find any related properties

    How can I query all the members of a group using querbuilder?  I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.

    Hi,
    FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
    FieldPoint systems are now setup in Measurement and Automation Explorer (MAX).  Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX.  The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
    Regards,
    Hal L.

  • How can i get all the users from weblogic server?

    how can i get all the users from weblogic server?
    i have configurated a LDAP server using iPlanet and
    in weblogic server console i see those users from LDAP
    server. but how can i get all the users in my program
    from weblogic server instead of LDAP server?
    BTW,how to configure a RDBMSAuthenticator and what should i do
    in Oracle? which tables should i create? and how are their architectures?
    Thanks
    Daniel

    BTW, i use weblogic platform 8.1
    "Daniel" <[email protected]> дÈëÓʼþ
    news:[email protected]..
    how can i get all the users from weblogic server?
    i have configurated a LDAP server using iPlanet and
    in weblogic server console i see those users from LDAP
    server. but how can i get all the users in my program
    from weblogic server instead of LDAP server?
    BTW,how to configure a RDBMSAuthenticator and what should i do
    in Oracle? which tables should i create? and how are their architectures?
    Thanks
    Daniel

  • How can I copy all the info from a contact card in address book to paste into a documnent?

    How can I copy all the info from a contact card in address book to paste into a documnent?

    Tom Wolsky wrote:
    The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
    You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
    Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
    I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

  • How can we find all the available  user-exits in sap without using SMOD?.

    How can we find all the available  user-exits in sap without using SMOD?.

    Hi,
    Please check this links for user exits list.
    http://www.planetsap.com/Userexit_List.htm
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/ab038.htm
    Regards,
    Ferry Lianto

  • How can I list all users and their DEFAULT tablespace?

    How can I list all users and their DEFAULT tablespace?
    Peter

    Peter, the following short article that lists the most heavily used Oracle rdbms dictionay views might be of interest based on your question:
    How do I find information about a database object: table, index, constraint, view, etc… in Oracle ? http://www.jlcomp.demon.co.uk/faq/object_info.html
    HTH -- Mark D Powell --

  • Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Did you move to iOS 8 via iTunes?  Your photos should all be on your iPhone 5s without any issues even if you updated via WiFi.  The update should have no impact on your photos other than to have moved any photos in your former Camera Roll to your Photos.  When opening the Photo App you should see Photos and Albums available at the bottom of the screen.  You can also look at Settings>General>About and looking down the list your should see the word Photos and a Count at the right.  This count should represent all of the photos in your iPhone.

  • How can i print all the contect of the code in sapscript window ? ?

    how can i print all the contect of the code in sapscript window ? ?

    Hi,
    Do you mean that you want to print the ABAP code to SAPscrip form ?
    Svetlin

  • How can i print all the tab pages not just the first page (tab)

    how can i print all the tab pages not just the first page (tab)

    You would need to do this programmatically. Here's one way:
    Attachments:
    Example_VI_BD6.png ‏3 KB

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • When creating a book how can I get all the photos from an album to show up in the order they were in the album?

    When creating a book in iphoto, how can I get all the photos from the album I want to use to show up in the order that they are in the album?  When I tried to use the option to add my own photos instead of having the program "flow" them, they showed up all mixed up.

    iPhoto puts them in the book in chronological order.  So to get your photos from an album into an iPhoto book in the same order you will need to use the Photos ➙ Batch Change ➙ Date menu option and set them all to the same date with a 1 minute time difference between each. 
    OT

Maybe you are looking for

  • TS1369 My new computer will not recognize my iPod Shuffle

    My iPod Shuffle is not recognized by my new computer running Windows 7 and consequently the iPod will not sync with my library.

  • Extracting "File Properties" metadata

    After processing scanned images in Photoshop CS3, I am uploading them to a DAM solution that has the capability to extract embedded metadata using custom defined keys. I would like to know the syntax/structure of embedded metadata labels that display

  • Tutorial on converting raster drawings to vector

    I have a friend who does drawings on paper that he wants to get scalable.  The high-level path appears to be scan the image and run autotrace in AI. As I look at online articles, some suggest taking the raster into PS to erase the pencil marks and in

  • Use of Java API classes unrelated to the problem domain

    Hi, I am designing a public API. java.awt.Dimension getScreenSize(); // rows, columns java.awt.Point getCursorLocation(); // row, columnDo you consider the above returned values abuses/misuses of existing AWT classes in a totally non-graphical contex

  • Burning in Date/Time

    Can Premier Pro add date and time stamps to the clips that I import from by video camera? ======================================================================== Title edited by moderator to make it specific to the question. [On a forum that's dedic