How do I unpublish a site?

I currently have two iWeb blogs posted which are available for my students. One has a ...mac.com address and the other has a ...me.com address. The firewall set up by the school district will not let us view the .mac blog from within the school system, but will let us view the .me blog. I assume the address change happened when MobileMe took effect. Can I unpublish (and how do I do that without deleting) the .mac blog and then republish it under the .me address?

When I do this, will I return to my blog content and re-publish? And... will the address come out with a .me in the URL?

Similar Messages

How do I unpublish my site?

I want to completely remove my site. I did a search and tried going on the iDisk, navigating to web/sites/iweb and moving my site to the trash(I originally tried Command + delete, but it did nothing?). It no longer appears in the iweb folder, but when I navigate to the site, it is still there?

Scott,
If your site was published from 1.1.2, then navigate to your site on the iDisk in the Finder following this path:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSiteIsHere
Highlight the Site folder in the iWeb folder and Command+Delete. Click 'yes' to the drop down warning and the site will be deleted immediately from the web.
If published from 2.0, then navigate to your site on the iDisk in the Finder following this path:
Go/iDisk/My iDisk/Web/Sites/YourSiteIsHere
Follow the same instructions, and the site will be erased from the web immediately.
Mark

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

The me.com website is not designed for or intended to be accessed by iOS devices. Apple provides support in iOS or seperate Apps for accessing all aspects of MobileMe except for the Accounts section.
Use MobielMe as intended and you'll have no problems.
See: http://support.apple.com/kb/ts1673
Even if you use a different browser to get access to me.com on iOS, you'll find most of it is unusable.
Other websites that present you with the mobile version have been programmed to do so by their developers. They specifically look for users accessing from 'mobile' devices and switch to the mobile site. Many such sites provide a link to go back to the 'full' site, if not, there's not a lot you can do except use a browser that can pretend not to be a mobile browser.

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

Can't figure out how to keep two different sites...

How can I keep two sites and be able to get to both of them. When I create an iMovie and go to the share tab to share it wants to put it in the last site I created. What if that's not the site I want it on? I can't figure out how to go back and forth to the sites and update them without them writing over each other...

Baldredlion:
Regarding Varkgirls suggestion about iWebSites:
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
Do you Twango?
15 MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.9) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

How do I transfer a site to another member to use?

How do I transfer a site to another member to use?

http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link to manage your membership which may help

How to check if a Site Column is being used before deleting

Hi All,
Before deleting a SharePoint Online site column I would like to check to see if it is being used by any list or library. I know how to do this when the site is on
premise using a PowerShell script.
$web
= Get-SPWeb
http://”sitecollectionurl”
$column
= $web.Fields[“Column Display Name”]
$column.ListsFieldUsedIn()
but I am having problems doing it on a SharePoint Online site. I know how to connect to the site, but I can not find any information on getting the field details,
like above.
if ((Get-ModuleMicrosoft.Online.SharePoint.PowerShell).Count
-eq0) {
Import-Module
Microsoft.Online.SharePoint.PowerShell -DisableNameChecking
$username
= "[email protected]"
$url
= "https://mySite.sharepoint.com/sites/Dev"
Write-Host
"Connecting to SharePoint Online, URL = $url"
try
Connect-SPOService
-Url $url /
-credential $username
Write-Host "Successfully connected.."
-ForegroundColor Green
$web =
Get-SPOSite -Identity
https://mySite.sharepoint.com/sites/Team1
$column
= $web.Fields[“Column Display Name”]
$column.ListsFieldUsedIn()
=
$web.Fields[“Page Content”]
catch
Write-Error "Failed to connect to
$url - check the credentials and URL!"
$_
Write-Host
"Disconnecting from SharePoint Online, URL =
$url"
Disconnect-SPOService
Write-Host
"Successfully disconnected.."
-ForegroundColor Green
Does any know what I am doing wrong, or does anyone have a script examples.
Many thanks
Colin

Hi Colin,
Unfortunately the Get-SPOSite doesn't return a fully fledged SPWeb object like you're used to in On-Prem PowerShell.
The only way to get at particular objects like this is to use CSOM in PowerShell, however even then it doesn't return quite the same object that you see on prem. (In short, the method you want doesn't exist.. but I'll show you how to get there at least.)
You'll need the Microsoft.SharePoint.Client.dll installed (You can download the SharePoint 2013 Client SDK, just do a search for it.)
Once that's installed, then the following script will retrieve a single column which you can then run
$column | gm to see the available properties.
$siteCollectionURL = "https://<tenantname>.sharepoint.com/sites/etc"
$Credentials = Get-Credential -UserName "[email protected]" -Message "Enter the password for $AdminUser"
##Then we'll establish a ClientContext for CSOM.
$scContext = New-Object Microsoft.SharePoint.Client.ClientContext($siteCollectionURL)
$SPOcredentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($Credentials.UserName, $Credentials.Password)
$scContext.Credentials = $SPOcredentials
$web = $scContext.Web
$siteCols = $web.Fields
$column = $sitecols.GetByInternalNameOrTitle("ColumnInternalName")
$scContext.load($web)
$scContext.load($siteCols)
$scContext.Load($column)
$scContext.ExecuteQuery()
Once you run that, $column contains as much info as you can get about the column.
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

How to edit the top sites on safari 7.0.1

The edit button that usually sits at the bottom of the top sites page in safari no longer exists and i can't figure out how to change my top sites or the amount of top sites displayed.

Safari 7
Top Sites Edit button is moved to top left corner the tile from the bottom left corner.
Hover the mouse pointer near the top left corner of the tile,
Edit button and the pin should appear.
Best.

How can I get my site back (done with Iweb) on my new hard drive? I had to change my hard drive after droping my computer.

Can someone help me. I had to change my hard drive few weeks ago and lost everything. I made a site via iweb and my site is still on line but I don't know how can I get my site back on my iweb with my new hard drive.

Patrick ~ Welcome to the Support Commuities. Here's where iWeb's key Domain file (containing your site data) is usually located:
...But rather than backing up just that file, consider using Time Machine and/or SuperDuper.

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How to link the main site menu to an anchor on a subpage?

How to link the main site menu (masterpage) to an anchor possition on a subpage? Is that possible. I would like the the contact menu to link to specific anchors location contact FAQ hours. The way I do it now. I have to create seperate html pages, I would rather do it on one page. Thanks
http://beta.tmj-sleep.ca/index.html

Hello,
To link a website Menu to anchors on any page in the website, you need to create a manual menu using the Menu Widget. You can change Menu to a manual Menu by clicking on the white arrow in Blue Circle which comes up at the top right of the Menu (Menu properties) and select the Menu type as Manual. Please have a look at the screenshot below :
Now you can add change/add the text there and when you select the text/menu item then from the Hyperlink drpdown at the top in the toolbar, you can select the name of the anchor on any page of your website.
Anchors are listed in Hyperlink dropdown in this format - Page Name:Anchor Name.
Hope this helps.
Regards,
Sachin

I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'

'''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''

If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

How to add a new SIT in HRMS?

How to add a new SIT in HRMS? Can I do it using Other Definitions?[i] What is the navigation for it?

1. Create Personal Analysis Key Flexfiled as per your requirement thru System Administrator
2. Register / Select the Pesonal Analysis KFF in SIT form under other definitions.
Navigation: HRMS responsibility => Other Definitions => Special Info Types
3. Select your Personal Analysis KFF from LOV and select the check boxes in whichever the form you want to use this SIT. (Ex: People form, Job form or Position form etc..)

Does anyone know how I can edit a site created by another user on my imac?

Hi,
We are a family new to our imac. One of us created a site with iweb. Now I want to get to the site and edit it? I don't see the site when I start iweb...Can someone provide an answer and any recommendations on how to set up multiple sites so that we can share editing privileges?
Thanks!
imac Mac OS X (10.4.10)

elegantKB,
Welcome to Apple's Discussions area, and congratulations on your new iMac!
Here's what you need to know about creating/sharing websites with the iWeb application; iWeb stores everything you create with the app in a single file, called Domain.sites. It lives on the hard drive of the computer that created it here. If you duplicate/copy this file and move it to another Mac using the same version of iWeb, that machine will open it and you will be able to edit the site. If you configure the second machine to publish to the same .Mac account (assuming you are using .Mac), you can not only edit the site, but you can also publish the same from two separate machines.
You will need to keep track of the latest version of this Domain file if you share it.
Be careful with this file and back it up often. It contains every single page and/or Site that you create with iWeb.
See these notes for more details on how to edit and publish the same iWeb site from two separate machines.
Mark

How do I unpublish a site?

Similar Messages

Maybe you are looking for