How do I upgrade my macbook pro to I-Lion without paying, because I bought it three weeks ago just before the release
How do I upgrade my macbook pro to I-Lion without paying, because I bought it three weeks ago just before the release
See "More like this" on the right.
Regards,
Shawn
Similar Messages
-
I upgraded my macbook pro from OS Lion to OS Mavericks. When unplugged, it heats up exceedingly and the battery life is extremely short. What to do?
Installation of the new OSX is very heavy hdd load, in addition spotlight reindexes all the files on your computer - it may be a few hours. If in the future will be the same macbook hot, you should contact your nearest Apple Authorized Service Provider.
May be required to clean notebook cooling system.
You can also install any monitoring utility sensors to your mac such as Hardware Monitor and look at the value of the temperature sensors.
Alex
Apple Certified Support Professional -
How do I upgrade my Macbook pro to OS 10.7
how do I upgrade my Macbook pro to OS 10.7
You need to buy 10.7 Lion.. it costs you 29.99 . But, 10.8 Mountain Lion is releasing in this month. It costs you 19.99.
Apple has noted that users can upgrade to 10.8 directly from 10.6.x. So, I would suggest you to wait till 10.8 is released and buy it for 19.99 and do and upgrade -
HT1338 How can I upgrade my MacBook Pro from OS X 10.5.8 to most recent Operating System ?
How can I upgrade my MacBook Pro from OS X 10.5.8 to most recent Operating System ?
I just bought a Ipad Air and realized than my MacPro does not support Icloud.Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I just upgraded my macbook pro to mountain lion. Now I want to install windows, but during installation using bootcamp, it says windows can't install on FAT partition. I couldn't change it to NTFS. Also how can I partition my hard disk after windows installation. Coz before windows installation, if I partition hard disk, it won't allow me to install windows saying startup disk can't be partitioned.......help would be appreciated.
Thanksbkchoo wrote:
Now, I wish to upgrade from Mountain Lion 10.8.5 to latest version of OS X Yosemite, but I am in doubt and worry if after upgraded to Yosemite, can I still using my Windows XP where I installed now in Mountain Lion 10.8.5 BootCamp?
Yosemite does not allow a new installation of XP, but an existing XP installation is self-contained and will continue to work. Does your XP installation use a FAT partition? You may be better off using NTFS and then upgrading to Yosemite.
Will the Yosemite upgrade process delete my Windows XP partition or crash my current BootCamp? Can I still have an option to load OS X or Windows XP (press 'alt/option' key during boot up) after upgraded to Yosemite?
If you have made any re-sizing attempts to WXP partition Yosemite will cause problems, otherwise the Yosemite upgrade leaves XP untouched.
Are there any specific reasons to upgrade to Yosemite? -
I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.
jimr.l wrote:
I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.
If you bought the MBP new 3 weeks ago, it should have come with Mountain Lion already installed. Did you update your MBP to the newly released 10.8.4 update? If not, what OS were you running before the upgrade, and what version of Mountain Lion do you have now? -
I upgraded my Macbook Pro to Mountain Lion and now cannot get my album artwork to show? Help!
I upgraded my Macbook Pro to Mountain Lion and cannot get my album artwork to show. Help!
Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?
You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
Matt -
How would you upgrade my MacBook Pro 15" to maximize performance? No dollar limit.
I love my MCB, but am not technical.
Spend my money, theoretically -- If you had an unlimited budget to upgrade this system to make it fast and more efficient, what would you buy or do to it?
I'm deciding if I should scrap it and get a new MacBook Pro 13" instead. I like my MCB 15", but it seems to be getting hung up alot with the spinning rainbow, everyday apps freezing or crashing, and just slow when I have multiple windows open in Safari and Firefox at same time. I realize that the sites I browse to are more graphic intensive than they were when I got the MCB in 2008, but I'm wondering if it would be worthwhile to spend some $$$ to upgrade whatever I can and save my pennies for a newer Mac in a year or two. Safari and Mail crash or get hung a lot, Photo Booth folder is mysteriously empty,
So should I expect to be able to get substantial performance improvement (speed, multi-tasking) if I upgrade whatever is upgradable?
I surf using multiple browsers and open many tabs and mail with numerous accounts and magicjack, ocassionally use iweb, pages, text, calendar, low intensity games.
Thanks for any advice and recommendations and thoughts. I'd probably get the Genius Bar to install upgrades.
MacBook Pro 15"
2.4 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
L2 Cache 3 MB
Bus Speed 800 MHZ
OSX 10.5.8
HD 186 GB (137 used)
I back up Time Machine to WD My Passport 1TB
GeForce 8600M GT:
Chipset Model: GeForce 8600M GT
Type: Display
Bus: PCIe
PCIe Lane Width: x4
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3212
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2834
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1a
BRCM2046 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a100000
Current Available (mA): 500
Current Required (mA): 0
Also -- it had a couple of soft drops to floor and one medium intensity drop, always on carpet. so the case (not unibody) is dented on the sides with ports. All "seem" to work fine except right side USB; looks pushed in and angled, and the plastic trim that fills in space connecting flat top of typing surface to bottom cover has a 4" piece cracked off (kind of looks like where grout would go). Devices work but if you move the wire it's power filckers off and on. Have never used firewire or thunderbolt ports on this.
I would like more USB port options (maybe a high grade extendor???) for Logitech laptop cooler, external HD, VOIP device, wired mouse, wired keyboard (I prefer wired).
Thanks again.Hello Neville,
Thanks for looking in to this and alerting me. I don't know how to interpret all the data in the descriptions of the USBs in your post (or mine, for that matter) Which descriptive line/codes show a USB 1.0 and a USB 2.0. I would like to understand how to read that.
Here's how I determined both are 2.0.
1. I checked my serial number at this Apple link and confirmed it is MacBook Pro 15" Early Version.
http://support.apple.com/kb/HT4132
2. Then I looked up the technical specifications at this Apple support link:
http://support.apple.com/kb/SP4
3. .Then I double-checked and looked up tech specs at this EveryMac link:
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .4-15-santa-rosa-specs.html
Both links say two USB 2.0 ports. I just took it for granted that they are both correct.
Much appreciation for your help.
M
Here's exactly what is listed in my About This Mac under USB:
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2834
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1a
Hub:
Product ID: 0x2046
Vendor ID: 0x0451 (Texas Instruments)
Version: 1.25
Speed: Up to 12 Mb/sec
Location ID: 0x1a200000
Current Available (mA): 500
Current Required (mA): 0
BRCM2046 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a100000
Current Available (mA): 500
Current Required (mA): 0
Bluetooth USB Host Controller:
Product ID: 0x820f
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.80
Serial Number: 001EC28C27BA
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a110000
Current Available (mA): 500
Current Required (mA): 0
Hub:
Product ID: 0x2046
Vendor ID: 0x0451 (Texas Instruments)
Version: 1.25
Speed: Up to 12 Mb/sec
Location ID: 0x1a200000
Current Available (mA): 500
Current Required (mA): 0
BRCM2046 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a100000
Current Available (mA): 500
Current Required (mA): 0
Bluetooth USB Host Controller:
Product ID: 0x820f
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.80
Serial Number: 001EC28C27BA
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a110000
Current Available (mA): 500
Current Required (mA): 0
Bluetooth USB Host Controller:
Product ID: 0x820f
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.80
Serial Number: 001EC28C27BA
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a110000
Current Available (mA): 500
Current Required (mA): 0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2830
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2831
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2835
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3a
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2832
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x5d
Apple Internal Keyboard / Trackpad:
Product ID: 0x0230
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.70
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Location ID: 0x5d200000
Current Available (mA): 500
Current Required (mA): 40
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0x5d100000
Current Available (mA): 500
Current Required (mA): 100
Apple Internal Keyboard / Trackpad:
Product ID: 0x0230
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.70
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Location ID: 0x5d200000
Current Available (mA): 500
Current Required (mA): 40
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0x5d100000
Current Available (mA): 500
Current Required (mA): 100
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x2836
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Product ID: 0x8502
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.60
Serial Number: 8T82D00GB0003L00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 500
Built-in iSight:
Product ID: 0x8502
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.60
Serial Number: 8T82D00GB0003L00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 500
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x283a
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfa -
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test. -
Have a macbook pro running osx lion. Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop. Also sometimes get a message sayiing computer doesn't recognize device. When I opened disk utilities the Kindle disk does show up there. What am I missing?
cashworth wrote:
Kindle is connected directly, not thru a hub. Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac. She said, "I'm not really familiar with apple products."
Precisely why it's not an iPad, and why it doesn't cost very much. An Apple rep would tell you how to connect an iPad to every computer.
Go here: http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470 -
How much does upgrading my macbook pro cost?
I got a '13-inch dual core Intel core i5' macbook pro as a gift, and I haven't opened the box yet. I need to upgrade it to a '2.2GHz quad-core Intel Core i7'. Is it possible? How much will it cost?
Let us be fair.
A bunch of arrogant upstarts:
Crossed the ocean in 60 ft ships
Begged mother England for help surviving even the first winters
Accepted the British army's help in fighting French and Indian War
Protested taxes, but refused to send our legally allowed representative to Parliament
Broke away
We do not have *that* much room to complain.
Sorry ... I am a student of history, even if I miss the complete picture sometimes. -
How do I upgrade my MacBook Pro 10.5.8 to Yosemite?
I'm trying to update my macbook pro so that I will be able to use my video editor that I purchased (Final Cut Pro X) and I can't run it with anything under 10.7 do i need to buy snow leopard (10.6) in order to get Yosemite? or am I just not able to get Yosemite?
You may be able to upgrade the RAM memory capacity to help OS X 10.10.x
run better in the old MacBook Pro. Depending on what model version you have
the amount of total supported RAM may vary. More recent reputable resellers
of quality guaranteed RAM have found several models of Mac can use more
capacity than originally indicated.
Had you supplied exact model information, this space could have directed you
to more details on that aspect. You can correctly identify your MacBook Pro
and look into upgrading the RAM from OWC macsales.com or Crucial.com to
get the better guaranteed product. I've never bought from them but they are
recommended and have good products, esp at OWC online.
•How to identify MacBook Pro models - Apple Support
•MacBook Pro: How to remove or install memory - Apple Support
For detailed information on all Apple mac products, you could check spec info
at http://everymac.com & also consider the download app http://mactracker.ca
In any event...
Good luck & happy computing! -
I can't upgrade my Macbook Pro to Mountain Lion and then Maverics
It all started with trying to get the latest version of Aperture. I'm running ver 3.4.5 and want to upgrade to ver 3.5. Well it now seems that to upgrade to ver 3.5 I need to upgrade to Maverics, but since Im running Lion ver 10.7.5 I need to upgrade to Mountain Lion first.
No matter what I clik on or check I'm getting messages saying my Macbook Pro - a 17" 2007 model intel 2.33GHz Core Duo won't upgrade to Maverics and I can't find a link to download to Mountain Lion any longer.
This is very annoying as there is nothing wrong with the Mac and I only really use it for Aperture.
Does anyone know if there is a way to upgrade to Mountain Lion and then Meverics? I really don't want to have to buy a new Mac.
The serial number of my Mac is W871801MX6C.
Thanks for any help.....The maximum OSX for a 2007 17" MBP is Lion, 10.7.5. stedman1 is correct.
Ciao. -
The reason I am wondering is because previously my MacBook Pro crashed and failed to load past the white screen with the logo and a spinning disk.
So after googling the problem, fiddling about in recovery mode (which is pointless given I know next to nothing about computers), I went to an Apple Dealer
and they very kindly re-installed OS X Lion for me, because the hard drive had decided to play up.
Now, I am again facing problems with my hard drive, after both Safari and iTunes crashed. After this Safari refused to open and I restarted several times before a loading bar appeared at the white logo w. spinning disk screen, and after the loading bar filled my mac finally managed to open Safari, albeit minus the close tab 'x', only now, it is also claiming there isn't enough memory to open iTunes (there is, almost 7 GB of free RAM) and after installing ClamXav and Sophos and finidng no viruses, I ran Disk Utility which informed me after I had verified the disk that I need to run in recovery mode using another disk (which, I don't have. My family has another mac running Snow Leopard and I have no disk for OS X Lion... or would an external hard drive do?) and that I need to repair the disk using Disk Utility.
Any help/ideas would be greatly appreciated
Additionally, a program that I have called Sibelius also plays up at around about the same time that the disk keeps crashing. Could this be the cause...?Welcome to the Apple Support Communities
As far as I know, I haven't noticed any problem with the Mid 2012 MacBook Pro about their hard disks. All hard disks fail with their use, but it looks like the hard disks you had on your Mac were defective (at least, the last one). If the hard disk was replaced recently, you should be able to take it and they should repair it for free, or at least, that's what Apple does on Apple Stores
Maybe you are looking for
-
The crash happened outside the java virtual machine in native code
Hi, I have a biometric device with which I am given some C++ dlls. I am trying to call methods inside these using java (jna). I am loading the dll "zkemsdk.dll+" as follows: zkemkeeper INSTANCE1 = (zkemkeeper)Native.loadLibrary("zkemsdk", zkemkeeper.
-
I was doing nothing stange and when i shut of my mega everything was fine untill the next morning. It would not boot anymore. HIFI mode does work but when you press the pc button it goes on and goes of directly. I've looked all over the place on the
-
Internal Order: Interface trip stop: ERROR: unknown status = ''
Hello, I have completed the setups for Internal orders:(the two orgs are within the same Operating unit, transfer method: direct) I am able to 1. Create internal requisition 2. Import Order 3. Book, Pick Release and Submit ship confirm Now, the inter
-
Hi my apple mac pro h key is not working
hi my apple mac pro h key is not working
-
Hi when I was load the data OLEDB source to excel desination. but first time is executive proper way but when i was try run the package second type iam getting this type of error: iam getting this type erros errors.. 1. [Excel Destination [