How does works default parameters in a program with logical database PNP?

Hi Friends,
I have a basic program, i need to filter info with period parameters in a program that uses logical database PNP, but it doesn't work.
If i use "person selection period" that it's suposed to filter info according to infotype 0001 (as the sap help says), it doesn't work, i use: PNPBEGPS = today and PNPENDPS = today, and the result it's a lot of registers that doesn't meet that criteria.
Also i tried with: data selection period, today, up to day, current month. And the result it's with the same problem.
How does works period parameters in a program with logical database PNP?
This it's the program example, i use the default category.
REPORT ZRPHRTEST.
tables: pernr.
infotypes: 0001.
start-of-selection.
get pernr.
write: pernr-pernr, p0001-begda, p0001-endda.
end-of-selection.
write 'fin'.

Hi,
Define pernr table under tables statement then and use GET PERNR event.This get event is followed by End-Of-Selection.
Syntax: Tables pernr.
Get pernr.
Try, activate and test. This should solve your problem.
Regards,
Abhijeet

Similar Messages

Calling standard program with logical database

Hi all,
I am trying to call a standard report (RPTBAL00) from a custom program without displaying the selection screen. I want to fill some of the select-options programmatically.
My code is somethig like this
      submit RPTBAL00
        with pernr-pernr = 'XXX'
        with pernr-pnpbegda = '20020101'
        with pernr-pnpenddaa = '99991231'
                      and return.
but the report gets called with defaults.
Does anyone know what I am doing wrong?

Hi
I seem your code is right, but I don't understand which elements are filled with default values.
Anyway this is a little code to submit a report with logical database:
Co.Ge.
loop at so_umskz.
    move-corresponding so_umskz to selopt.
    append selopt to frange-selopt_t.
endloop.
if sy-subrc = 0.
    frange-fieldname = 'UMSKZ'.
    append frange to range-frange_t.
endif.
refresh frange-selopt_t.
loop at so_zlsch.
    move-corresponding so_zlsch to selopt.
    append selopt to frange-selopt_t.
endloop.
if sy-subrc = 0.
    frange-fieldname = 'ZLSCH'.
    append frange to range-frange_t.
endif.
if not range-frange_t[] is initial.
    range-tablename = 'BSIK'.
    append range to trange.
    call function 'FREE_SELECTIONS_RANGE_2_EX'
      exporting
        field_ranges = trange
      importing
        expressions = texpr.
endif.
submit rfitemap
          with ................
          with free selections texpr and return.
Max

Copy/create program with logical database

Hi
I need to create a program with the same selection-screen as SAP standard program RPRAPA00.
RPRAPA00 is using a logical database, but even that I have passed in the PNP in the attributes of my own progam, I don't get the selection in the top (buttons, key-date info + selection info).
The rest of my program looks fine.
Any ideas how I get the missing selections into the selection-screen?

Hi,
Define pernr table under tables statement then and use GET PERNR event.This get event is followed by End-Of-Selection.
Syntax: Tables pernr.
Get pernr.
Try, activate and test. This should solve your problem.
Regards,
Abhijeet

HR - Programming without Logical database

Hi All
I have some doubts, I am mainly using Logical database while creting Reports in HR, if I want to use HR function modules and BAPI do they use logical database,
question is when we have to do HR programming with Logical database and when without Logical database.
cheers
AJ

Hi Srinivas
If I am doing some Enhancement on ESS/ MSS , using Webdypros, I cant define Logical database anywhere, so I have to use Function modules or BAPIs ........???
But usually in Reporting you can define the Logical database in the Program attributes.........so I think Logical database can only be used when it can be defined in the program attributes........if you have any other scenarios........please let me know
regards
AJ

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How does one remove a third party program?

how does one remove a third party program? Just "delete" it? Isn't there something to run?

See Here > Uninstalling applications
Check the applications website for an uninstaller and use that.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How to call subroutines defined in ABAP program with type S

how to call subroutines defined in ABAP program with type S? can you give an example?

Normal executable program,
REPORT ZTEST_MAIN.
perform sub1 in program ztest_sub.
"you can call using in program addition
Subroutine pool program
PROGRAM ZTEST_SUB.
form sub1.
endform.

How works lync when I made a video conferences with someone in my same building?I want to understand how lyncs works, when I made video conferences with someone in my same building, if my call go to to server and then go to the person I´m calling. Or if L

I want to understand how lyncs works, when I made video conferences with someone in my same building, if my call go to to server and then go to the person I´m calling.
Or if Lync realizes that we are in the same building so it never leaves, so it don’t generate traffic. My concern is the bandwidth consumption.
Please a I need the information.
thanks

In addition, you can refer to the following link about the media connection in different scenarios:
http://www.shudnow.net/2010/12/06/lync-server-2010-port-ranges-and-audiomedia-negotiation/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support

How does apple know what the fault is with my iphone?

How does apple know what the fault is with my iphone when sending it to them on apple care. My sleep/ wake button seems to be stuck so I sent in for a repair on the website and they sent me a apple care box and said send it back but I Carnt remember if I told them the fault or do they know by the repair ID number? Please help as I'm sending it off in a couple of day.

Include a note in the shipping box describing in detail the issue you have with the phone. Include your name, address, phone number, email, iPhone model and serial number, and a detailed explanation of the problem.

ABAP Report Program Logical Database PNP

I have a ABAP program using the logical database PNP. The report is config to run on MSS using EP. I have added code to capture the Org Unit when it is pass to the program from MSS. My issue is how do i capture the org unit value that is passed to the program. I have added code to capture field pnporgeh in the START OF SELECTION event. This works great if you are running the program from R3, but none of my edit checking against field pnporgeh works.

Hi John,
I am also having same trouble where in i have added a new custom(Z) report in the MSS ->My Staff -> Reporting under report category -> Time Management (MSS). I am not able to find how the value of org unit which is selected on portal screen is passed to report in R/3 which is using PNP logical db.
I tested in debugging but selection screen parameter PNPORGEH contains nothing.
Many Thanks in advance for the help.
Edited by: Ankit Kashyap on Nov 17, 2010 12:40 PM

How to hide selection fields when using logical database PNP

hi.
i m using a logical database PNP and report catagory 1PY_DEF in my program.
but when i execute it , it shows to selection box. one name is period and second is selections.
but i just want to show only period box selection fields , not the selection box fields.
how it iz possible.

HI,
In my case i haved used the PNP logical database..in the selection box i don't wnat to display Contorling area,Cost Center & Organizational Unit. i have written this code to hide those fields..
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPKOKRS' OR
       screen-name CS 'PNPKOSTL' OR
       screen-name CS 'PNPORGEH'.
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
      CLEAR screen.
    ENDIF.
ENDLOOP.
Try modify hide the total block instead of individual fields in that block.

How to investigate high io in a RAC with multiple databases?

how to investigate high io in a RAC with multiple databases?

RAC is saying that a single server lacks the processing capacity needed for databaseA. So additional databaseA instances on additional servers are needed in order to meet the processing demands for databaseA. Thus RAC is required.
Multiple databases on a single server says that the server has spare processing capacity and that it can not only deal with databaseA processing demands, but also with the processing load of databaseB.
So how does your statement about running multiple database RAC instances on the same RAC server node, make sense? And does your I/O issue not immediately point to the fact that no, RAC server1 cannot deal with the I/O resources required by both databaseA and databaseB?
After all, how is I/O scaled on RAC? How is ANYTHING scaled on RAC? By adding more databases to a RAC server node? Of course NOT!!
RAC scales by adding more servers (with a new database instance each) to a physical database in order to scale processing capacity and I/O. By adding more I/O channels to access the SAN/shared storage. By adding more CPUs to increase processing capacity.
Bluntly put - multiple RAC database instances on a single RAC server node is kind of an idiotic approach to scalability in my view....

How does works default parameters in a program with logical database PNP?

Similar Messages

Maybe you are looking for