How to cancel an running load

Hi Gurus,
     I wanted to know how to cancel an running load..is it to change the status into red n deleted it from the cube..??
   once i did it like this in my system but after sometime the laod again automatically converted into green n continue its loading..
can anyone tell me on how to cancel an running load...
waiting for reply
Ravi

Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Thanks,
JituK

Similar Messages

  • How to cancel payment run?

    Hi,
    Is there a way to cancel a complete payment run? I know how to cancel individual payments (and clearing) but how to do it for a run which includes e.g. +1000 payments?
    Thanks!
    Regards, Aki

    HI,
    Hi
    If you haven't yet run the payment proposal, go to Edit/Parameters/Delete.
    If you have run the payment proposal go to Edit/Proposal/Delete.
    REGARDS,
    SANTHOSH

  • How to cancel a running search

    Hi
    Is it possible to cancel a running search? Sometimes a search may take a long time to complete and may be the user would like to cancel the search. When the user uses the quick search I display a popup to prohibit user input based on the documentation here:
    [DF Code Corner: How-to show a glasspane and splash screen for long running queries|http://www.google.com/url?sa=t&rct=j&q=displaying+popup+for+long+running+queries&source=web&cd=1&ved=0CFUQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fdeveloper-tools%2Fadf%2Flearnmore%2F27-long-running-queries-169166.pdf&ei=48LWT8SAOcmg4gTfj6DGAw&usg=AFQjCNH5T8wNP7MJtaCHf5chVHqy82aq1w]
    Now, I am considering to put a cancel button in the popup and cancel the search when the button is clicked. How could I do that if it is possible.
    I am using JDev 11.1.1.4 and JHs 11.1.1.3.35
    Regards,
    Ferez

    Ferez,
    this is really an ADF issue, not JHeadstart. I think there's not much you can do beyond setting timeout parameters on your view objects ( http://docs.oracle.com/cd/E28389_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html#setQueryTimeOut%28int%29 ), but you might get better answers on the ADF forum.

  • In forms how to cancel long running process or query in 10g

    We have application which is hosted on 10g AS. Some forms has lot of processing to be done and sometimes user wants to cancel the processing in between maybe because he wants to change some value and refire processing.
    Based on the search on net 'Esc' key was used in earlier version of forms to function as User requested Cancel operation. How can same be done in 10g. Do we have to do anything in fmrweb.res for this. Is there some setting to be done in forms or in AS for this functionality.
    Does this matter on whether JInitiator is used or JPI is used for running the application?
    Edited by: suresh_mathew on May 21, 2013 1:36 AM

    Hi,
    Exit can be used to cancel query mode i.e. in case you go into query mode by Exit you can cancel query mode. Suppose you went into query mode and you have fired query which will take some time to fetch how can I abort it.
    In earlier version of form there was 'Cancel' facility wherein if triggered it used to fire an error message 'Ora--01013 user requested cancel of current operation"
    With this facility you can abort any query which is executing or any long running process which forms is currently performing.
    fmrweb.res would have entry like
    27 : 0 : "Esc" : 1001 : "Cancel"
    The above entry I picked from OPN
    Java Function Numbers And Key Mappings For Forms Deployed Over Web [ID 66534.1]
    Unfortunately this is not working for us even if I put this in frmweb.res of 10g AS
    Basically I want ability to Abort/Cancel a long running process be it query execution or standard process triggered in the form.
    Any advise or help is highly appreciated.
    Suresh

  • How to cancel  Payment Run with cheque generated

    Hi All,
    We have printed wrong  Invoices.Payment run is being done and cheques are generated .We would like to do Payment run again by correcting our Invoices.Please advise the steps to resolve it
    Thanks in Advance
    Regards,
    Payal Saxena

    Hello,
    Please follow the following process:
    1. Go to TC: FCH8, cancel the payment (here you have to cancel the payment cheque by cheque)
    2. Go to F110>click edit>select Payment>delete output. Again click on edit>select proposal-->delete.
    3. Go to TC: FBRA, here you have to reset the data means after reset the clearing docs cleared items will come into open items.
    Now, you can check the Vendor open items and run F110 with correct data
    Thanks
    Para

  • How to Cancel Long Running Report

    Hello
    I'm looking for a way to cancel the printing of a long running report programatically? I'm using the CrystalDecisions.CrystalReports.Engine.ReportDocument() class.
    Thanks for your help

    Hi Syed,
    The old viewer was COM based and the new viewer is .NET. CR has the ability if the DB server supports Async communication. Most DB's don't so it wasn't of much use. For those that did the functionality was through custom coding within the Designer only. Async would allow CR to send a stop processing command to the DB server. If the server did not have the ability then CR can only wait for the data to start coming back before stopping the viewer from updating.
    In any event I don't believe the Windows Viewer in .NET has the ability but I will suggest it to the Product group to add the ability in some future version.
    Thank you
    Don

  • How to cancel long running query by client

    Hi,
    I have the following problem:
    The user calls a service function (business logic) by an application client. Inside the function call an SQL-Query is generated and started on the database (JDBC). Depending on comlexity of the query or search parameter (e.g. search for chemical structures with SYMYX or Accord) the statement is running very long. In this case the user would like to cancle the search by pressing a button in the client application.
    Using preparedStatements there is a cancle method. Because the preparedStatement is inside the called business logic function the preparedStatement is not accessible fom the client or other service methods the normal way. If I understand this correct, I have to make all started preparedStatements public inside my service and then try to access the correct statement by an additional service call (other thread). This sounds a bit like a hack.
    Has anyone this constellation running or is there an other way?
    I would be happy about any hints or suggestions.
    Thanks, Antje.

    Best to post this in the Java > SQL/JDBC Forum

  • Cancel a running job

    Hi,
            How to cancel a running job programatically. Any function modules available for this. I don't want to delete the job, but have to cancel it.
    Thanks in advance,
    Vishnu Priya

    Hi,
    You can use SM37 and SM50 for this purpose
    SM50 - Select corresponding your PID - Process Menu -Cancel without core
    Regards,
    Satyendra

  • When I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

    when I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

    Did you check the home page setting to make sure that if doesn't have pipe (|) symbols?
    See these articles for some suggestions:
    *https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    *http://kb.mozillazine.org/Preferences_not_saved

  • How to cancel a print job on the hp officejet 8600 pro running xp

    How do cancel a print or copy job on the Officejet 8600 Pro Premium?  There is no "cancel" button on the control panel.  Do I have to go through the software?  Time consuming -
       Thanks!
    This question was solved.
    View Solution.

    scarlattid3,
    The cancel button should be located in the bottom right corner of the screen. The only thing is it's not going to show up until you start the print job or copy and then it should appear for you.
    Let us know if you are able to find this.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Urgent please: How To Cancel Backup

    Please someone help me.....
    I have Storm 2 carrier verizon. I try to update my OS via OTA, everything ok until step Backup it take almost 1 day. Progress bar 18% for ONE DAY, and progress bar Current Database on AutoText 16%. Now how to cancel it????
    Solved!
    Go to Solution.

    hotplug wrote:
    5. Replace the battery to your BlackBerry and allow it to reboot. = After reboot, program from BlackBerry "Wireless Software Update" pop up again and didn't come with any messages
    Ok. Got it.
    Can you cancel that message or anything?
    Can you perform the tasks I mentioned above to reload the OS?
    If not, do this below:
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life.
    Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to stop the running infospoke

    Hi Experts,
    there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

    hi denny,
       Go to SM37 , find the job , stop the process
    or
       To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
    find the process in the process Overview (SM50 / SM51 ).
    Set the restart to NO and Cancel the process without core
    u can also see these threads that are already posted:
    stopping v3 run job LIS-BW-VB_APPLICATION_02_010
    how to cancel or change the background job which is scheduled
      In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
    sure it helps
    Thanks
    Varun CN

  • How to cancel a service request?

    I had been running the Ipod in the car and noticed it had gone into the red. I turned it off and it went off normally. When I got home I hooked it to the computer to charge and it froze up completely, no response to anything, hold button, click wheel, weirdest yet, the backlight stayed on permanantly. And the computer did not recognize that it was even connected in Itunes or as a drive.
    So I freaked out a bit and after an hour or so while( after trying what I could which was basically holding controls down and flipping the hold button off and on ) I gave up and put in a service request, and went to bed.
    The next day, I noticed that the Ipod was dark ( which I expected since the battery was almost gone and the backlite was stuck on ). But just for fun I press the clickwheel on and lo and behold, it came back on as normal. I hooked it up to the computer as usual and it was visible to Itunes and the computer as it should have before. So I went through the reset process just in case and relaoded my music.
    So I guess there should be a 6th "R" Let it sit over night and see if it still screwed up the next day
    Now I'm stuck trying to figure out how to cancel a service after already receiving the return box Which was very fast by the way. Like, 2 days. Anyway, I looked all over the support site and could not find anything that looked like what I needed.
    Does anyone have any idea what I need to do to cancel the service request?
    Mike
    Dell Dimension 8400   Windows XP Pro  
    Dell Dimension 8400   Windows XP Pro  

    Call apple...
    Apple Phone Numbers
    btabz

  • How to cancel screensavers ?? thanks a lot!

    anybody help me pls,
    how to cancel "screensavers" --- this application program in solaris 2.6 open windows environment?
    thanks a lot!!

    Hi
    Your question is very clear. What do you mean by "Screensavers" ? Are you referring to the Solaris screen savers that appear on the screen when you leave the system with no activity for a while or are you referring to some program called screensavers ?
    In case of the first, it is very simple.
    Assuming you have Openwindow desktop,
    1. DO a click on the right mouse button in an empty area of the workapce.
    2. Select Properties
    3. Click the Category section drop down window.
    4. Select Miscellaneous
    You will see that a Screen Saver On/Off button which can
    be put to off or put in on "auto" with timeout minutes specified.
    Change it as you please.
    If you have a CDE environment,
    Just run /usr/dt/bin/dtstyle and select Screen icon.
    It will show you the details of the screen saver settings.
    HTH
    Shridhar

  • Script to know how many statements are not loaded in oracle CM

    Hi,
    Can some one would help me on how to prepare a script to know the bank statements are not loaded into oracle CM and how many checks under that particular statement are not loaded??
    I have the following info with me..
    1. The statements are loaded in a temporary table as soon as we run statement loader program.
    2. Then the records will get into ce_statement_headers_int_all and ce_statement_lines_interface.
    3. Then they will get loaded into ce_statement_headers_all and ce_statement_lines tables.
    Now, the only thing i am confused is how to get to know the statements list that are not loaded into oracle along with the error message. i am confused which tables will give the exact info ce_statement_headers_int_all and ce_statement_lines_interface or ce_headers_interface_errors and ce_lines_interface_errors??? immediate help would be highly appreciated and its very urgent...........
    Thanks.

    Hi Helios,
    I dint get you. This is not something which SR can be raised. I need to know how script can be written to know the statements that are not loaded in oracle cash management. I need to prepare a notification where in that should contain how many statements have been loaded successfully and how many are not on a daily basis...
    Thanks.

Maybe you are looking for